I have a remote database which I need to make a local copy of. I have sucessfully scripted the db and created it locally. however I cannot import the data to the local server. I get this error:
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot truncate table
i think i am doing everything ok but it still wont work.dbo.xxx beacause its being referenced by a foreign key constraint.
Any ideaas welcome.
Gary
I have one column in SQL Server 2005 of data type VARCHAR(4000).
I have imported sql Server 2005 database data into one mdb file.After importing a data into the mdb file, above column
data type converted into the memo type in the Access database.
now when I am trying to import a data from this MS Access File(db1.mdb) into the another SQL Server 2005 database, got the error of Unicode Converting a memo data type conversion in Export/Import data wizard.
Could you please let me know what is the reason?
I know that memo data type does not supported into the SQl Server 2005.
I am with SQL Server 2005 Standard Edition with SP2.
Please help me to understans this issue correctly?
Hi there
I am importing data from a database on one server to the same database (exactly the same table structure etc) on another server. I am specifying the data from certain tables on the source database which are completely empty on the destination database. The tables on the destination database each have a primary key column (Identity Specification = YES, Is Identity = YES, Identity Increment = 1, Identity Seed = 1, Not for Replication = YES). The import fails on the first table (YvGroup) whose primary key, "GroupID", is the foreign key within other tables (Relationship is set).
The error i'm getting is as follows:
Error 0xc0202049: Data Flow Task: Failure inserting into the read-only column "GroupID". (SQL Server Import and Export Wizard)
Error 0xc0202045: Data Flow Task: Column metadata validation failed. (SQL Server Import and Export Wizard)
Error 0xc004706b: Data Flow Task: "component "Destination - YvGroup" (40)" failed validation and returned validation status "VS_ISBROKEN". (SQL Server Import and Export Wizard)
Error 0xc004700c: Data Flow Task: One or more component failed validation. (SQL Server Import and Export Wizard)
Error 0xc0024107: Data Flow Task: There were errors during task validation. (SQL Server Import and Export Wizard)
I'm sure the most important error is the first one, "Data Flow Task: Failure inserting into the read-only column". Is this happening because i'm trying to import data into primary key columns that are usually populated by an auto incremented integer and is seeing it as read only? Or is it due to the relationship with other tables? In which case if you have a table structure set up with relationships how would you ever be able to import data?
How can I get round this?Cheers
Should I be able to use a SQL Server Compact Edition sdf file as the data source for the SSIS Import and Export Wizard?
When I select the .net Framework Provider for compact Edition from the data source drop down, I get a message box with "An error occured which the SSIS Wizard was not prepared to handle. Exception has been thrown by the target of an invocation. (mscorlib) Specified method is not supported. (System.Data.SqlServerCe)"
We have a user with a sdf file that will no longer sync, so we wanted to get her data from sdf file tables into SQL Server tables quickly and easily. Since the SSIS wizard wouldn't work with the sdf data source, we copied SQL Server Mgmt Studio query results into an Excel spreadsheet via the Clipboard, them imported those records with SSIS. But we need a repeatable process in case this happens in the future.
We tried to reinitialize her merge replication subscription with SQL Server Mgmt studio, and with C# code, but none of that would work.
How many MS data provider options are available for SQL Server compact edition? I see ".Net Framework Data Provider for Microsoft SQL Server Compact Edition" in the SSIS data source drop down, but shouldn't I also see an OLE-DB Provider for SQL Server Compact Edition?
This is all on my XP workstation where I can successfully write C# code for SQL Server Compact data access with Assembly = System.Data.SqlServerCe = C:Program FilesMicrosoft Visual Studio 8Common7IDEPublicAssembliesSystem.Data.SqlServerCe.dll. So I think I have the proper tools installed.
Thanks.
I am trying to simplify a query given to me by one of my collegues written using the query designer of Access. Looking at the query there seem to be some syntax differences, so to see if this was the case I thought I would import the database to my SQL Server Developer edition.
I tried to start the wizard from within SQL Server Management Studio Express as shown in one of the articles on MSDN which did not work, but the manual method also suggested did work.
Trouble is that it gets most of the way through the import until it spews forth the following error messages:
- Prepare for Execute (Error)
Messages
Error 0xc0202009: {332B4EB1-AF51-4FFF-A3C9-3AEE594FCB11}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not start session. Too many sessions already active.".
(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 33 - ATable" (2065) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard).
There does not seem to be any method of specifying a number of sessions, so I don't see how to get round the problem.
Does anyone know how I can get the import to work?
A view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server.
I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard.
However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Error)
Messages
Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
- Setting Destination Connection (Stopped)
- Validating (Stopped)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Stopped)
- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)
- Post-execute (Stopped)
Does anyone encounter this problem before and know what is happening?
Thanks for kindly reply.
Best regards,
Calvin Lam
I am attempting to import data from Microsoft Access databases to SQL Server 2000 using the DTS Import/Export Wizard. I have a few errors.
Error at Destination for Row number 1. Errors encountered so far in this task: 1.
Insert error column 152 ('ViewMentalTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 150 ('VRptTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 147 ('ViewAppTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 144 ('VPreTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 15 ('Time', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Could you please look into this and guide me
Thanks in advance
venkatesh
imtesh@gmail.com
Hi there
I am importing data from a database on one server to the same database (exactly the same table structure etc) on another server. I am specifying the data from certain tables on the source database which are completely empty on the destination database. The tables on the destination database each have a primary key column (Identity Specification = YES, Is Identity = YES, Identity Increment = 1, Identity Seed = 1, Not for Replication = YES).
The error i'm getting is as follows:
Error 0xc0202049: Data Flow Task: Failure inserting into the read-only column "GroupID".
(SQL Server Import and Export Wizard)
Error 0xc0202045: Data Flow Task: Column metadata validation failed.
(SQL Server Import and Export Wizard)
Error 0xc004706b: Data Flow Task: "component "Destination - YvGroup" (40)" failed validation and returned validation status "VS_ISBROKEN".
(SQL Server Import and Export Wizard)
Error 0xc004700c: Data Flow Task: One or more component failed validation.
(SQL Server Import and Export Wizard)
Error 0xc0024107: Data Flow Task: There were errors during task validation.
(SQL Server Import and Export Wizard)
I'm sure the most important error is the first one, "Data Flow Task: Failure inserting into the read-only column". Is this happening because i'm trying to import data into primary key columns that are usually populated by an auto incremented integer and is seeing it as read only?
How can I get round this?
Cheers
I get the following error during the execution of my package and can't understand the reason:
The INSERT statement conflicted with the FOREIGN KEY constraint
I use a lookup to import keys to my fact table as I do with the rest of the dimensions. Does anyone faced this error message before?
Thanks
have tried to import data from a big (257Mb, I has about 1.000.000) flat file into a table, inside SSIS. The process doesn’t work correctly. It stops in the same register (about 179.000). I have reviewed the process and have opened the file making it shorter (about 150.000 lines, including the line that before seems to break the process), and it works. Making the file longer it breaks the process again.
The error showed by the program:
Error: 0xC02020A1 at Data Flow Task, Flat File Source [2820]: Data conversion failed. The data conversion for column "debe" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Data Flow Task, Flat File Source [2820]: The "output column "debe" (4066)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "debe" (4066)" specifies failure on error. An error occurred on the specified object of the specified component.
Error: 0xC0202092 at Data Flow Task, Flat File Source [2820]: An error occurred while processing file "Z:PROYECTOS ITSoluciones de negocioProyectosSANDOProyecto 5. CodificaciónETLcapun00108.unl" on data row 36804.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Flat File Source" (2820) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Anybody knows what could be happening?
Any help would be very appreciated
Thanks
PD: I mean that it´s not a date format problem (I have reviewed some post talking about it)
I am attempting to import an excel sheet to SQL and keep coming up with the following error:
Error during transformation ... row number 29
TransformCopy conversion error: Destination does not allow null
Source column 'ProductID' (DBTYPE_R8),
Destination column 'ProductID' (DBTYPE_STR)
When I look at row 29, the ProductID is '1240000A' and not NULL.
All prior ProductID's had no Alpha characters ans appeared as 7 digits eg. '1240000'. I Previewed the data before the transformation and for some reason the ProductID '1240000A' appears as NULL, even though the Excel Sheet has the value '1240000A' entered. Help would be appreciated. Thanks.
Hello everyone,
I'm having difficulties in Importing data using DTS with a SQL Query.
The Sql query :
SELECT *
FROM Organisations
where Organisations.OrganisationID = 1
I receive this Error Message :
Error Source : Microsoft OLE DB Provider for SQL Server
Error Description : Deferred prepare could not be completed.
SELECT permission denied on object 'Organisations', database 'souce_db', owner'dbo'.
Context : Error calling GetColumnInfo. Your Provider does not supprt all the interface/methods required by DTS.
Can anybody help me . Thanks
I am using the import Wizzard in SQL Server 2005 for the first time and trying to import some excel data into the db table.
I keep getting this error. Any ideas??
- Validating (Error)
Messages
Error 0xc02020f6: Data Flow Task: Column "game_ID" cannot convert between unicode and non-unicode string data types.
(SQL Server Import and Export Wizard)
Error 0xc004706b: Data Flow Task: "component "Destination - cfb_boxscores" (137)" failed validation and returned validation status "VS_ISBROKEN".
(SQL Server Import and Export Wizard)
Error 0xc004700c: Data Flow Task: One or more component failed validation.
(SQL Server Import and Export Wizard)
Error 0xc0024107: Data Flow Task: There were errors during task validation.
(SQL Server Import and Export Wizard)
Hi,
I am trying to use DTC to import about 500 records from an Excelsheet to an SQL database.
Some fields contain strings with a length of about 1700 characters.
When i'm trying to execute the DTC generated code it is giving an error and saying that the maximum string length of 255 has been reached. Althoug the column in the database is defined as nchar(1750).
Does anybody know an answer to this problem ?
Thanks in advance,
Goofy
I receiveed the error:
Error 0xc0202055: Data Flow Task: The column delimiter for column "Column x" was not found.
I would like to have the import continue., even the error occur. I have the error output to ignore, but doesn't seem to be working. Any suggestion on what to do next, or how to skip the row that create the problem.
thanks
Hello,
I am getting an error while trying to import data into SQL 2005 from an existing Access MDB database. When I try this on another workstation there are no problems and the data is imported successfully.
Could someone tell me what to look for or what setting I have incorrect. On the workstation with the problem I had removed SQL 2000 Personal Edition and installed SQL 2005 Standard Edition. Also, I have both Visual 2003 and 2005 installed on this workstation as well.
Thanks
TITLE: SQL Server Import and Export Wizard
------------------------------
Could not set up data flow connections.
The connection type "OLEDB" specified for connection manager "{DAE0A984-862B-4E4A-890E-8DB4860C9F6B}" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
------------------------------
ADDITIONAL INFORMATION:
The connection type "OLEDB" specified for connection manager "{DAE0A984-862B-4E4A-890E-8DB4860C9F6B}" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
({55FFB2C2-E461-4FDB-B3C4-EE4677B80C77})
------------------------------
BUTTONS:
OK
------------------------------
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Error)
Messages
The connection "SourceConnectionOLEDB" is not found. This error is thrown by Connections collection when the specific connection element is not found.
({3DDD68E3-30A4-4513-B0AB-45F340BAB4C0})
- Setting Destination Connection (Stopped)
- Validating (Stopped)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Stopped)
- Copying to [EJTest].[dbo].[Journal] (Stopped)
- Post-execute (Stopped)
- Cleanup (Stopped)
I need to periodically import a (HUGE) table of data from an external data source (not SQL Server) into SQL Server, with the following scenarios:
Some of the records in the external data source may not exist in SQL.Some of the records in the external data source may have a different value at different imports, but this records are identified univocally by the same primary key in the external datasource and in SQL Server.Some of the records in the external data source may be the same in SQL.
Due to the massive volume of the import, I would like to import only the records which are different from what I have in SQL Server (cases 1 and 2 above). In fact case 2 is the most critical.
I thought of making a query with a left outer join between the data in the external data source table (SOURCE) and the data in the SQL Server table (DESTIN). The join is done on the respective primary keys (composed keys of up to 10 columns) and one of the WHERE conditions will be that the value in SOURCE is different from the value in DESTIN.
The result of this query would be exactly what I need to import.
How to do this in SSIS??? I couldn't figure out how to join tables in different data sources yet.
In fact I cannot write a stored procedure to do that, since one of the sources is in a datasources not SQL Server.
I have seen the Lookup transformation in this article http://www.sqlis.com/default.aspx?311 but this is not exacltly what I want to do.
Another possibility is to use the merge join, but due to the sorting I believe its performances would be terrible!
Thanks in advance for your suggestions!
Hi all,
It looks like these options are only available in the SQL Server Management Studio? I installed SQL Server Management Express Studio and I can't even find the DTSWizard.exe on my machine.
Can you please help how I can import data from excel or where can I download the SQL Server Management Studio?
Your prompt response is greatly appreciated.
Thanks!!
Tram
Hi,
Iam trying to import data from a csv file into my table in SQL Server 2000. My table is called as temp_table and consists of 3 fields.
column datatype
-------- -----------
program nvarchar(20)
description nvarchar(50)
pId int
pId has been set to primary key with auto_increment.
My csv file has 2 columns of data and it looks like follows:
program, description
"prog1", "this is program1"
"prog2", "this is program2"
"prog3", "this is program3"
Now i use BULK INSERT like this
"BULK INSERT ord_programs FROM 'C:datafile.csv' WITH (FIELDTERMINATOR=',', ROWTERMINATOR='', FIRSTROW=2)"
to import data into my table in SQL server and it gives me this error
"Bulk insert data conversion error (type mismatch) for row 2, column 3 (pId)"
I guess i have to use fileformat or something since i dont have anything for pId field in the csv file to make it work...
Please help me out guys and please post a snippet of code if you have.
Thank You.
I have several versions of SQL Server and have been using SQL 2008 on a regular basis due to this issue. Our SQL 2014 when I do the Import Data process, it opens up the dialog window, hit next, and the data source is currently defaulting to ".NET Framework Data Provider for IBM i" - when it does this it immediately errors out with:
"An error occurred which the SQL Server Integration Services Wizard was not prepared to handle.
Additional Information:
> Exception has been thrown by the target of an invocation (mscrolib)
>> Failed to find or load the registered .NET Framework Data Provider (System.Data)"
It immediately crashes/closes the Import/Export wizard with me unable to change the data source to what I need it to be.
My 2008 defaults to SQL Server Native Client 10.0 and does allow me to change to that same option (at which point it errors) but it does not close the wizard.
I need a way to either:
> Default the starting Data Source to be something else
> Fix whatever error is causing it to crash - I am at a loss as to what the error is looking for
> Not have the wizard crash whenever it defaults to this source.
Any of the above solutions would work fine - but at the moment I am unable to use the Import/Export wizard at all in SQL 2014.
Hi guys,
I am looking to import data into the SQL Server database, from a CSV file..
anyone with any suggestions for how to start with it ??
Thanks heaps
I’m trying to import data from CSV to SQL Server 2012 and I’m using SSIS 2012.
CSV file data:
Field1,Field2
“123”,”abc “xyz” wxy”
The data should read into the database as
Field1 Field2
abcabc “xyz” wxy
The problem is in ”abc “xyz” wxy”
if I add another set of double quotes inside the field double quotes it will work.
”abc ““xyz”” wxy”
Anyway I can fix this without writing a text parser?
I am trying to import data from SAP through SQL SERVER Import & Export Wizard.... but its throughing following Error:
Copying to [LATPRO].[dbo].[RESB] (Error)
I went through couple of sites, as well as SQL help file and as asked increased my virtual memory still i am getting same error, does anyone know anything regarding aforesaid problem??
MessagesInformation 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Error 0xc02090f5: Data Flow Task: The component "Source - Query" (1) was unable to process the data.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source - Query" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)
Error 0xc0047039: Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)
Hi all,
when trying to Ămport files to our database server from a client, I keep getting an error:
- Validating (Error)
Messages
Error 0xc00470fe: Data Flow Task: The product level is insufficient for component "Source_txt" (1).
(SQL Server Import and Export Wizard)
Error 0xc00470fe: Data Flow Task: The product level is insufficient for component "Data Conversion 1" (175).
(SQL Server Import and Export Wizard)
... doing the same import when logged on the server, hasn't been giving me any errors, how come. I can from my client without trouble import tables from other DB servers but when ever it is files it won't do it.
I tried as mentioned in other threads rerun setup to re-install SSIS, but as it was already installed it wouldn't re-install. My next move would be to make a clean install, but not sure it would help, as I think this is a buck.
best regards
Musa Rusid
Im using the sql import/export features to transfer a database from one server to another. For some reason when I am transfering tables with primary keys when I look at the new database on the other server it doesnt seem to hold the primary key info. Can anyone tell me why and how i can preserve this info so I dont have to go back through and reset this info.
thanks
Hello everyone,
I need help with a situation that iam facing right now.
Here is the problem:
I have a tab limited or comma delimited CSV file. I want to read the contents of that CSV file and import it in one of the tables in the database.
id firstname lastname
-- ---------- ----------
"1" "John" "Smith"
"2" "Louis" "Garcia"
I assume that the columns in the CSV files and the table in the database match the datatype.
What would be a good approach to do it ? If anyone have a code that does the job, please post it.
Thank You.
Hi,i have developed an web-enabled student database application, where in i'll put all the details of the students from different universities.while uploading the details of the students, i wanna just import the data given by the universities into the server.I dont know how exactly the same could be done, also, since each university might be having there own format for the data, how can i import these into singe database?Any ideas ... Please. Thanks in advance
View 3 Replies View RelatedHi,
I am having my present database system in DB2. Recently, I have transferred to SQL Server 6.5 and have created a database there.
I want to import all my data from dbase to SQL Server 6.5.
I have created a CSV file from the dbase database.
How can I import this data into a table in SQL Server 6.5 ??
I can't find any DTS component in SQL 6.5 like we have in SQL 7.0 and 2000.
Thanks.
Does anyone know how to import data from an Oracle view (on Unix machine) to the tables in NT/SQL server 7.0? At least point me to the right docoment resource, if available. Thanks a lot.
wendy
problem is I don't have unfettered access to the MS SQL Server(7), so I need to send instructions on how to do it to a client.
After reading up a little, I figured "select view into ##tmp_table", and then dump the table, which, if I'm right, means I'll have an SQL dump that I can quite easily import into MySQL.
Problem,: What's the syntax to dump that temp table, or is there a better way to import the data into MySQL
TIA
I have created some DB tables on SQL Server. Now I want to import some data from Access using Data Transformation Services.
The APPLICATION table I have created has the following columns:
AppID, AppName, AppMnem, GripsID, Decommissioned, Last Modified, Modified By
AppID is the primary key and is an identity column with an autoincrement on insert.
The query I used to import the data from Access is:
select `T>Application>General`.`Application Name`, `T>Application>General`.`Application Mnem`, `T>Application>General`.`GripsID`, `T>Application>General`.`Decommissioned`, `T>Application>General`.`Last Modified`, `T>Application>General`.`Modified By`
from `T>Application>General`
where `T>Application>General`.`Application Mnem`='TMS'
order by `T>Application>General`.`Application Mnem`
The transformation I used is:
'************************************************* *********************
' Visual Basic Transformation Script
' Copy each source column to the
' destination column
'************************************************* ***********************
Function Main()
DTSDestination("AppName") = DTSSource("Application Name")
DTSDestination("AppMnem") = DTSSource("Application Mnem")
DTSDestination("GripsID") = DTSSource("GripsID")
DTSDestination("Decommissioned") = DTSSource("Decommissioned")
DTSDestination("Last Modified") = DTSSource("Last Modified")
DTSDestination("Modified By") = DTSSource("Modified By")
Main = DTSTransformStat_OK
End Function
However, I keep gettting the following error:
Error at destination for row number 1. Errors encountered so far in this task: 1.
Instert error, column 1 ('AppID', DBTYPE_I4), status 10: Integrity violation; attempt to insert null data or data which violates constraints.
Unspecified Error
Any ideas as to what the problem is?
Thank in advance
Hi I have a database in DB2 and i would like to import this data into sql server 2000. How can i do that?
Thanks.
Hi
I need to know how to import data from .txt to the MS SQL Server. IT is really important and i have 1 hour only, any help ....... appreciated.
Thanks