OK so there is some data in an Oracle DB that I have to summarize based on grouping info stored in a SqlServer DB. How can I import the Oracle data into a SqlServer temp table using SqlServer Express? Thanks.
View 2 RepliesI would like to import data to a sqlserver express database. The database I am interested in importing was created in MSDE. I tried backing it up and using the restore function in sqlserver express but with no success. I have not been able to find an import function in the Management Studio Express interface. Is it possible to import this information, or should I get busy with my data entry?
View 4 Replies View Related
I am currently Using SQL Server Express for testing purposes while waiting for SQL 2008 to be issued. (Our project will take some 2-3 years to complete so concerns about using a 'new' version of SQL Server are not pertinent). We have ordered this week Visual Studio 2008 as the shrink wrap version is due out the end of this week.
I have been able to migrate all our data from the old database (Superbase) but only field names and field types.
Indexes and validation stuff is lost.
The problem I have is that:
I can only import to an empty database, therefore if I start to create Indexes and otherwise modify the structure of this database in SQL Server then I will lose all this work on the next occasion I need to import (as Superbase will still continue to be our firm's current daily data handling tool for another year or two)
My thoughts where to create a copy of the original import, develop the constraints, indexes etc. on this secondary copy. then (on the day we are ready to migrate) empty the copy of data and import the data only
Does SQL Server Express have the tools to do this?
If not then are my best options to use SQL Server Beta until the new software is realeased (but notice that Visual Studio 2008 does not like SQL2008 - is there a fix for this?)
I hope this is the right forum for these questions
Thanks in advance
Hi experts;
I have a problem with unicode character 0x2300
I created this table
create table testunicode (Bez nchar(128))
Insert Data
insert into testunicode (Bez)values('Œ€„¢')
with 2 Unicode characters
Œ€ = 0x2300
„¢ = 0x2122
Selecting the data
select Bez from testunicode
I see
"?„¢"
„¢ = 0x2122 is ok but instead of 0x2300 there is 0x3f
When I modify the insert statement like that ( 8960 = 0x2300 )
insert into testunicode (Bez)values(NCHAR(8960)+'„¢')
and select again voila i see
"Œ€„¢"
Does anyone have an idea?
Thanks
I have SQL Server 2000 and am using DTS to simply import some data located on a remote Oracle DB.
If I have the following information:
TNS Name:
ThisApp.world
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcpxxx.world)
(PROTOCOL = TCP)
(Host = SomeHost)
(Port = 1234)
)
)
(CONNECT_DATA =
(SID = App)
(GLOBAL_NAME = ThisApp.world)
)
)
And I also have the name of the Table.
Using the DTS Wizard, on the Choose a Data Source screen, I pick the following:
Data Source: Microsoft ODBC Drive for Oracle
Server:
Username:
Password:
I don't know what I should put into the other fields, given what I have above, i.e. what to put in for Server, Username, and Password! Or should I use a different procedure to import this Oracle data? I am almost positive I was not supplied the username/password. I was told I could connect given the above TNS information. What do you all recommned?
Your assistance will be greatly appreciated.
Hi,
I created SQL Server package and schedule the job. SQL Server allows us to connected different database for e.g. for oracle using "Oracle Provide for OLD DB" to retrieve our database. A link is create between this database which move the data to SQL Server. I'm sure there is no issues in the link, as I'm using it to retrieve several oracle database which contains both Arabic and English data.
But after Importation it is showing Junk values. Please advise me what step I should take next.
Regards
Azeem
I have created a simple package that uses a sql command to pull data from an oracle database and inserts the data into a sql 2005 table. Some of the data fields that i am pulling from contain two digits after the decimal point, however this data is lost when it gets into sql. I have even tried putting the data into a flat file, and still the data is lost.
In the package I have a ole db source connection which is the oracle database and when i do the preview i see all the data I need. I am very confused and tried a number of things to get the data into sql, but none work. Any ideas would be very helpful.
thanks
hi all,i have a table called Employee in sql server 2005 as shown beloweid ename esal001 john 5000002 lina 4000 I need to fill the above table from xml file(Emp.xml) as shown<Root> <Employee> <eid>003</eid> <ename>rose</ename> <esal>2000</esal></Employee><Employee> <eid>004</eid> <ename>sam</ename> <esal>6000</esal></Employee></Root> plz try to help me i am in need or give me any helpful suggestions thanks in advance
View 6 Replies View RelatedHi everybody,
View 13 Replies View RelatedHi;We just migrated to SqlServer 2005. When I import tables from fromSqlServer database into another the identity fields get switched offfrom being identities.How can I prevent that from happening?Thanks in advance for any informationSteve-------------------------------------------------------------------Microsoft SQL Server Management Studio9.00.1399.00Microsoft Analysis Services Client Tools2005.090.1399.00Microsoft Data Access Components (MDAC)2000.085.1117.00(xpsp_sp2_rtm.040803-2158)Microsoft MSXML2.6 3.0 4.0 6.0Microsoft Internet Explorer7.0.5730.11Microsoft .NET Framework2.0.50727.42Operating System5.1.2600
View 3 Replies View RelatedHi pals,
I have a small problem in Datflow task.
Basically i am having two tables(similar to my current requirement). One in sql server 2005 and another in ORacle
SQL Table
create table t1
( c1 numeric(6),
c2 numeric(6),
c3 varchar(50),
year numeric(4),
district varchar(10)
)
Oracle Table
create table app_t1
( c1 number(6),
c2 number(6),
c3 varchar2(50),
year number(4),
district varchar2(10),
constraint cpk primary key (c1,year,district)
)
I am using 2 global variable for passing values to c4 and c5 columns in oracle table.
The variable names are g_year and g_district.
i am using a dataflow task to move data from sql server 2005 to oracle 9i database
I am able to load the data from sql server to oracle.
Till here it is fine.
But the requirement is if i get same data i.e same dist and same year then we need to delete the data
in oracle table as
"delete from app_t1 where year = ? and district = ?"
Immediately i need to issue a commit statement.
and thereafter i need to load data for that particular district and year.
To accomplish this requirement i am using ,
An Execute SQL Task to Delete the data from ORacle
An Execute SQL Task to COMMIT the transaction
Finally i am loading data from sqlserver to oracle using a dataflow task.
But i am getting an error as
"Value violated the integrity constraints for a column or table.".
I think the deletion operation is not getting committed.
So what i did was i connected to oracle and deleted the data using above DELETE statement
and again come back to SSIS package and ran the package once again, this time it is successfull.
Why is it so. Any thoughts on this?
Any help would be greatly appreciated.
Thanks!
OK so there is some data in an Oracle DB that I need to query and analyze. Unfortunately, the criteria for selecting/grouping the data is stored in a MS Sql Server DB. This cannot be changed.
SqlServerGroup Name ID# Item ConditionAAA123 1 a 1AAA123 2 a 1AAA123 3 a 1AAA123 4 a 2AAA123 5 a 2AAA123 1 b 3AAA123 2 b 4AAA123 3 b 3AAA123 4 b 4AAA123 5 b 3BBB123 1 a 1BBB123 2 a 1BBB123 3 a 2BBB123 4 a 2BBB123 5 a 2
OracleGroup Name ID# ValueAAA123 1 50%AAA123 2 55%AAA123 3 60%AAA123 4 80%AAA123 5 70%BBB123 1 35%BBB123 2 45%BBB123 3 50%BBB123 4 50%BBB123 5 80%
I need to be able to get this:Group Name Item Condition ValueAAA123 a 1 55%AAA123 a 2 75%AAA123 b 3 60%AAA123 b 4 67.5%BBB123 a 1 40%BBB123 a 2 60%
Any idea how I can get the data from these two DBs to talk to each other? Thanks.
I am getting a dump of information from SAP into an Excel file. I would like to take this excel file and import the data into a SQL 2005 Express database.
Is this possible? Or will I need the full version of SQL to do this?
Thanks
need a clue about how to migrate the data from an Oracle applications 11.03 and underlying Oracle 8.05 database to navision 4.0 running sql server 2000
tia
I have software that uses SQL Server Express as it's database. I am only able to import so many records until it stops and fails to allow me to import anymore.
I'm very new at this but, is there some type of limitation on Table size that's preventing me from importing anymore data?
I'd really appreciate it if someone could help me,
Thanks... Bill
Hi All,
At the moment i have a piece of software that uses Access to store the data into a number of tables.
I am developing a new piece of software that has been built around SQL express and need to upgrade users that are using access. I have managed to write the installation to install etc and also the start of a script to insert all of the tables. I cant work out how to get the data into SQL express using a script.
Basically the access db (CentralDb) will be stored a a given location C:Program FilesCentralDB.mdb
The tables within the SQL version are indentical to access but i need a way of pulling out the information stored and putting it into SQL, and as there is no DTS i am becoming stuck on how to automate the process.
Any ideas?
Thanks in advance
Martin
Is there a way to transfer data from a SqlServer db to a SqlServer Express db. I tried to use the backup file of SqlServer, but this file is not valid for SqlServer Express. Or there any alternatives?
thanks,
Henk
Hello everyone,
I have exported data from few tables from my old sql server 7.0 database. Now, I need to import those data into new database which is on SQL Server 2005 Express. How do I do that in 2005 express server? Any idea?
Or, is there any better way to import data for selected tables into new database?
Thanks,
Ujjaval
Hi,
I am using Windows 2003 server and Sqlserver 2005 by the use of Linked server , I made a connection to Oracle 10g after that I am importing records from Oracle to sqlserver 2005. When I made tnsnames.ora in sql machine , it worked fine but when i am using tnsnames file from oracle server then i fiired importing procedure it returns below maintain error :
OLE DB provider "MSDAORA" for linked server "BI_ORACLE_LS" returned message "Unspecified error".
OLE DB provider "MSDAORA" for linked server "BI_ORACLE_LS" returned message "Oracle error occurred, but error message could not be retrieved from Oracle.".
Msg 7311, Level 16, State 2, Line 1
Cannot obtain the schema rowset "DBSCHEMA_TABLES" for OLE DB provider "MSDAORA" for linked server "BI_ORACLE_LS". The provider supports the interface, but returns a failure code when it is used.
Please let me know.
Thanks
Hi!
View 36 Replies View RelatedHi,
Below and far below are my SQL command and raw data. In the data, each lot has 13 records, for example, T6L09641 has 13 records. What I am working on is to average the Total, Large, Middle and Small for each lot as a representative instead of listing every record. So, I wrote a SQL express and put it in my Access and run it. However, I got an error message "ORA-00905:missing keyword(#905)". I double checked it again and found nothing stange. Someone can help me to modify it?
SELECT LINE_ID, LOT_ID, AVG(TSIZE_QTY_PA)/10000 Total, AVG(LSIZE_QTY_PA)/10000 Large, AVG(MSIZE_QTY_PA)/10000 Min, AVG(SSIZE_QTY_PA)/10000 Small, RCV_TIME Time FROM IWMES.DIMES_PPTU_PT_IPCRST Where (LINE_ID='L401') GROUP BY LOT_ID HAVING RCV_TIME BETWEEN 12/10/2006 00:00 AND 12/13/2006 00:00 ORDER BY LOT_ID
Raw Data
http://photo.pchome.com.tw/vitaminb6/116597990115
What I wished
http://photo.pchome.com.tw/vitaminb6/116599056886/
Hi All,
I want to connect to SQLExpress database on the network. I can do so using code but I want to use the Data Source Configuration Wizard. It seems this only works for local instances of SQL server. Is this true?
I can connect just fine to the database on the network using Microsoft SQL Server Management Studio Express...for what this is worth.
I have tried to map a drive to the SQL server machine and pick the mdf file but I get the error msg of network path is not supported for database files....I have turned on allow remote connections, allow tcp/ip, named pipes, added sqlserv.exe and sqlbrowser.exe to my firewall exceptions ect..
I want to be able to use Table Adapters, SqlDataAdapters ect. After reading numerous forum questions/ kb articles this seems to be a common problem. I am on the verge of just saying forget it and use MS Access instead.
Thanks in advance!
I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.
I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?
The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.
Thanks!!
Hi All,
I have become frustrated and I am not finding the answers I expect.
Here's the gist, we support both Oracle and SQL for our product and we would like to migrate our Clients who are willing/requesting to go from Oracle to SQL. Seems easy enough.
So, I create a Database in SQL 2005, right click and select "Import Data", Source is Microsoft OLE DB Provider for Oracle and I setup my connection. so far so good.
I create my Destination for SQL Native Client to the Database that I plan on importing into. Still good
Next, I select "Copy data from one or more tables or views". I move on to the next screen and select all of the Objects from a Schema. These are Tables that only relate to our application or in other words, nothing Oracle System wise.
When I get to the end it progresses to about 20% and then throws this error about 300 or so times:
Could not connect source component.
Warning 0x80202066: Source - AM_ALERTS [1]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
So, I'm thinking "Alright, we can search on this error and I'm sure there's an easy fix." I do some checking and indeed find out that there is a property setting called "AlwaysUseDefaultCodePage" in the OLEDB Data Source Properties. Great! I go back and look at the connection in the Import and .... there's nothing with that property!
Back to the drawing board. I Create a new SSIS package and figure out quickly that the AlwaysUseDefaultCodePage is in there. I can transfter information from the Oracle Source Table to the SQL Server 2005 Destination Table, but it appears to be a one to one thing. Programming this, if I get it to work at all, will take me about 150 hours or so.
This make perfect sense if all you are doing is copying a few columns or maybe one or two objects, but I am talking about 600 + objects with upwards of 2 million rows of data in each!!
This generates 2 questions:
1. If the Import Data Wizard cannot handle this operation on the fly, then why can't the AlwaysUseDefaultCodePage property be shown as part of the connection
2. How do I create and SSIS Package that will copy all of the data from Oracle to SQL Server? The source tables have been created and have the same Schema and Object Names as the Source. I don't want to create a Data Flow Task 600 times.
Help!!!
I am trying to import 6M records in a table from an Oracle 10g databaseinto a SQL Server 2000 database.After importing 1.5M+ records I get the following error:Ora-01555: snapshot too old: rollback segment number 129 with name"_SYSSMU129$" too smallHow can I speed up the import process between Oracle and SQL Server?The database box I'm using has 12GB of memory and 1.5 TB of space. Itshouldn't be a hardward problem. :-)Thanks in advance.
View 2 Replies View RelatedI am trying to import a variety of data from an Oracle 10g
database. When I import the data using the OLE DB it takes a long
time (100K records an hour).
How can I improve the throughput of my import?
Is there a better driver I could be using?
Any input will be appreciated.
db55
I have an app that uses a sqlserver 2000 jdbc driver to connect to a sqlserver 2000.
Is it possible to do a direct replacement of sqlserver 2000 with sqlserver 2005 express just by reconfiguring the app to point to the express? The app would still be using the sqlserver 2000 jdbc driver to try and make the connection.
If that is a possibility, what can be some differences in the configuration? Previously with 2000 the config information I entered is:
server name: "machinename"( or ip). I've also tried "machiname/SQLEXPRESS"
DB name: name of db instance
port: 1433(default)
user and pass.
My attempts so far results in
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket."
and
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL."
Hi, I've just got my brand new shiny SQLServer and would like to set some new tables set up etc. But I'm really lazy and I was wondering if there is any way of importing table layouts, coulmns, whole structure type thing into SQLServer from Microsoft Access using DTS? I know it's a bit optimistic, but just wondered....
Any help gratefully accepted.
Thanks,
Paula.
Hi all,
Please let me know if it is possible to import an Oracle .dmp binary file into SQL using DTS. DTS has ODBC and OLE DB drivers for Oracle but both require specifying the Oracle database name, user name and password. i.e., it looks like the only way to import the .dmp file into SQL would be to first load the .dmp file into Oracle and then tranfer it from Oracle to SQL using DTS. Is there any way to load the .dmp file directly into SQL?
The .dmp file is a binary file that has been generated from Oracle using the 'Export' utility.
Thanks in advance,
-Praveena
hi,
this is my current set up:
sql server 2005 express edition,
sql server management studio express,
oracle tables (original source data currently linked through odbc)
adp database file (new db where i'm trying to import the above oracle tables)
i need to import (or make copies) on a weekly/daily basis, of several oracle tables into a new adp database.
what is the fastest option? some of these tables hold over 1m records.
i have also heard of "linked servers" and "dts", but would like some experts advice before starting looking into this.
many thanks
luzippu
Hello all, I hoping to get some input on how to get around this odd problem. I use the SSIS Import Wizard to create a package that imports data from an Oracle 9 database into SQL 2005. One of the 'columns' selected from Oracle is actually two floating point columns multiplied together.
ie: SELECT one * two FROM table
In the SSIS wizard the data preview for this shows up as it should, with the column data in floating point form. However after actually importing the data, all the numbers get imported as integers even though they are going into a floating point column.
Any ideas how to get around this?
Thanks
Importing CVS to SQLServer 2005 in a web application:
I need to import CSV file to a table. This is a .Net 2.0 web application running in the WebServer which has .Net 2.0 installed. SQL Server 2005 is a database in another machine. What are my options? Would SSIS work in WebServer if no database installed in that machine.
Thanks
chapter1
Delegates officially are to nominate Cheney as the GOP's vice presidential candidate before he addresses the group Wednesday night.
chapter2
"I think that the vice president's speech tonight is going to be about big issues, the big issues of this campaign -- the war on global terror, the president's education policy, the fact that the economy is turning up again," she told CNN's "American Morning."
chapter3
She said she had known her husband since he was 14 and planned to share anecdotes that many people have not heard before in her introduction.
Chapter4
Maverick Democratic Sen. Zell Miller of Georgia is scheduled to deliver Wednesday's keynote address -- a role he also played at the 1992 Democratic National Convention, which nominated President Clinton.
Chapter5
In the earlier speech, Miller, then governor of Georgia, said that "for 12 dark years, the Republicans have dealt in cynicism and skepticism. They have mastered the art of division and diversion, and they have robbed us of our hope."
I wanted to import the above word doc into my sql server DB.
I have two columns in the table
1.Chaptereid
2.chapter_notes
chater1,chater2,chapte2,chapter3,chapter4 and chapter5 should go into chaptered column and the text followed by the chapter id should be imported into chapter_notes column.
So how can I import this document.
Thanks.