Hi,
Could someone give a pointer how to import couple of hundred images
into Sql Server 2005 Express Edition database?
Is there a tool for it? Can it be done with Sql Management Studio or
is it just a matter of writing own piece of software (a little helper
app) to do it?
-timonardo
hi, i have an excel spreadsheet with data that i want to place into a sql database.is there any easy way of doing this with sql server 2005 express?
View 3 Replies View RelatedHello,I use the SQL Server 2005 Express Edition. I want to create a new database, but I cant find where and how.Can anyone provide me with starter's tips and/or a good tutorial?
Thanks!
I developed a site using Visual Web Developer 2005 and the database used is SQL Server 2005 Express edition.Everything works fine. However, when I move the site to my IIS server, it says that my database is read-only.Is it because my SQL Server is an express edition?
View 5 Replies View RelatedI am trying to add a SQL Server 2005 Express Edition Database to my Web Site. But I am unablr to do so.
I am getting the following error: {"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"}
I am unable to understand what exactly is the problem.
Pls Help me out.
Thanx In Advance.
How many Stored Procedure can I add to a database in SQL SERVER 2005 Express edition?
I remember that only 32 Stored Procedure can be added to a database in SQL SERVER 2005 Express edition,but now I can add over 32 Stored Procedure to a database from SQL Server Management Studio Express CTP! How many Stored Procedure can I add to a database in SQL SERVER 2005 Express edition?
Dear supports,
This is the following Error when i tried to back up database in MS SQL SERVER 2005 Express Edition.
"
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
Backup failed for Server 'OFIX07SQLEXPRESS'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Backup+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The backup of the file or filegroup "sysft_article" is not permitted because it is not online. BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------"
Any one know the solution please help
Rith
Dear Friend ,
I have try to back up database in MS SQL SERVER 2005 SP2 Express Edition ,It shows the following error .Please help me to solve it and tell me why it happend like this.Thanks
"
===================================
Backup failed for Server 'OFIX07'. (Microsoft.SqlServer.Express.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Backup+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.BackupPropOptions.OnRunNow(Object sender)
===================================
System.Data.SqlClient.SqlError: The backup of full-text catalog 'article' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online. Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data. (Microsoft.SqlServer.Express.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages)
at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries)
at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv)
"
Hello..
I've installed Visual Basic 2005 express edition & tried to connect to SQL Server 2005 express edition. I noticed that VB2005 Express Edition doesn't have any OLEDB provider for SQL Server. The only OLEDB Provider is for M.Access. Is this correct? if so, what should i do if i want to connect SQL Server 2005 express edition with VB2005 express edition by using OLEDB connection type?
I really appreciate any respond from you guys.. Thank's and waiting for the good news..
Best regards,
VITRELLE
hi
i have a database file backup which is having no extension (eg saims) . Can i create a database using this backup in sql server expression edition.
Or else is there any way to get the .mdf file from sql server 2005 full edition??????????????
Thanx in advance
i've tried to install sql server 2005 express edition several times but when it get to the 'database services' it gives the following error:
SQL Server Setup could not connect to the database service configuration. The error was:
[Microsoft][SQL Native Client][SQL Server]Login failed for user 'sa'.
please help
I am new to this type of programming and and have read all articles on adding an image to the database and it seems they all use sql queries to add an image but I want to add an image at design time. I am using Visual Basic 2005. I am also using Visual Basic 2005 Express Edition to try the same thing. I am trying to build a Translator program for english to Brazilian Portuguese and the reason I want to add the images is so that when I translate the word cat from english to Portuguese, I can also show an image of a cat. Can anyone please help me
View 3 Replies View RelatedHi there
I am new to SQL Server, but the current project that I am working on has the following requirement:-
1) Migrate the application (a servlet based web application on Apache Tomcat) from Solaris to Wintel
2) Migrate the supporting database from SQL Server 2000 to Sql Server 2005
3) Get IIS to communicate with Tomcat for serving servlet/jsp etc to the client
Though I successfully completed item 1 above, am stuck at item 2. Details are below
Actions taken for item 2
A. Installed MS 2005
B. Created new database in MS 2005 (logged in as user 'sa')
C. Generated SQL scripts (such as create table table_A etc) from existing MS 2000
D. Genearted SQL scripts (such as insert into table_A etc) from existing MS 2000
E. Created new schema in MS 2005
F. Ran scripts C & D in the new schema. All tables are records populated.
G. Obtained new JDBC driver and test run to see if connection is working fine, and it worked. Even ran an sql statment
Code Block[select count(*) from sa.table_A]
and got appropriate response.
H. When I made the application to talk to this new database (which is a copy of Production from step C, D above), it's behaving as though it cannot find the record.
I. When I further debugged, I realised that the web application is excuting queries without mentioning the schema. For eg.
Code Block[Select firstName, lastName from table_A]
Or rather it assumes that the user connecting to database is same as the schema name.
J. To further ascertain my point, I ran the query
Code Block[Select firstName, lastName from sa.table_A]
and it worked!
Now the real problem is that I cannot modify the existing code to append a schema name and this approach is rather not recommended best practise.
I tried to match the user name with the schema name, even made this schema as default to the user. But still not finding any luck.
I request all you experts out there to help me out with this problem.
Regards,
prad.nair
I have:
A server computer running SQL Server 2005 Enterprise Edition.
A industrial computer running SQL Server 2005 Express Edition.
And now also a Psion WorkAboutPro with CE 5 that should run SQL Server Compact Edition.
The industrial computer syncs its data with the server, basically saying "this has happened".
Now I want the Psion to sync with the industrial computer, but this sync must two-way.
I have tried to find a guide or something that can tell me "do this to sync" but the information i have found is sketchy at best.
If someone could point me in the right direction of a guide or something else it would be much appreciated.
Regards,
Björn
following is the code which i am trying to use
it throws an error and dosent work.
error details:
Unable to cast object of type 'System.Data.Linq.DataQuery`1[tbl_temp_bank]' to type 'tbl_temp_bank'.
source code(aspx.vb file)
Dim c As New temp_business_bankDataContextDim tag = From t In c.tbl_temp_banks Where t.TIN = Convert.ToInt32(tin.Text) Select t
c.tbl_temp_banks.DeleteOnSubmit(tag)
c.SubmitChanges()
please can some one help me with this.thanks
Hey all,I'm working on a database which (I hope) will have photos in it. However, I'm having difficulty how to properly insert photos into an SQL database. I see that it has an 'image' data-type, but I don't know how to make proper use it.Given that the answer to this question could be quite lengthy, if someone could provide me a link to somewhere, or a book to pick up that could answer this answer, I would be most gratified. Thanks!
View 2 Replies View RelatedHello,
I have been unable to create a replication from an SQL Server 2005 standard edition database to remote SQL Server 2005 Express Edition. The remote express edition is on a Virtual Private Server we are leasing from a hosting company. The name of the remote DB is similar to vs572.si-vs572.com. I can connect to this with SQL server authentication through Management Studio and also with SSIS. But, I have been unable to create a push subscription (I have tried a test push subscription with the same publication to a local SQL Express server here in our office and this works fine).
Here is the error message: SQL Server Replication requires the actual server name to make a connection to the server. Connections through server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'VS572SQLEXPRESS'.
The hosting company had originally installed a shared SQL server which would not support replication. They then installed SQL Express edition and I was hoping this would allow us to run a replication.
I tried to connect to VS572SQLEXPRESS with out any luck. I check the remote connections, made sure replication was installed, etc., but no luck.
Any help would be greatly appreciated!
Thank you,
Albert
Hello!M a newbie.. I just want to know, that wots the difference b/w SQL Server Standard Edition and Express Edition.?And can I use Visual Studio 2005 (Professional Edition) with SQL Server Express Edition.?
View 1 Replies View RelatedIm new to SQL server express 2005 and im having issues loading images into my tables. can anyone show me how to achieve this?
Thanks
Matt
Is it possible to import an MS-Access database (or table) into a new SQL Server 2005 Express database? If so, how is it done?
View 1 Replies View RelatedHi friends
plese help me for my little things.
I m student and develop a website. i want to know how images /pics and video and audio files are store in Sql server2005 database. and ya i want to store whole file not just its address.
i using asp page like uploadImage.aspx in that i put UploadFiles control now i m confuesd to storing Images so plese help me and give code or some good easy trick at my level
And once store image or video and audio file in sql database then after how i used in my asp.net page. which control i wish to used for this files so plese this also slove it. give also code or any easy trick for fullfil my task..
i hope u all help me
Thanx in advance to u all friends
I am currently downloading the mega-sized files for SQL Server 2005 Express Edition and was wondering if I was going to be able to install it onto my workstation alongside the SQL Server 2005 Developer Edition? Was hoping someone could advise. I did browse for an answer, but have not come across it yet. I know I'll find out once my download is complete, but that could be awhile :)
Thanks,
-Neil
If i have been using sql server 2005 express for developing my application and i decide to upgrade to sql server 2005 express with advanced services while still working on the same application, what will happen to my application's database. Can i be able to continue with my work with out any major regrets.
View 1 Replies View RelatedHi,
I have created a database using VB Express 2005 express edition and I have created number of tables and SP's etc.
I am trying to use the database diagram tool but I get an error stating that the database doesn't have a valid dbo. I say yes to the prompt about making myself a valid dbo but I then get a message stating that I do not have permissions to imprersonate the dbo.
How do I overocome this issue?
Thanks
Bill
Hello
We have developed a database with a lot of information in and we are going to move this database from a Win XP with SQL 2005 Express to a Windows 2003 server with MS Sql Standard 2005. How can we do that?
Good Afternoon.
I installed C# with SQL Server 2005 Express Edition. Everything works fine on the account I installed it on, on the local machine. However.
1) I can't connect using RDP to that same account and use SQL. It times out.
2) Other users on that computer cannot make user of SQL. Also times out.
I couldn't find documentation on these issues.
Thanks,
Philski
Hello,
I am trying to "import" a .dbf into SQL Server Compact Edition, but I cannot find a way to do so. Can someone tell me how this is done?
Hi,
I'm getting an error while trying to install SQL Server Express 2005 Express Edition. I'm attaching the log of the installation process here. Please throw some light on the same.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlShutDownRANUInstance
PerfTime Start: Do_sqlShutDownRANUInstance : Sat Mar 08 21:39:12 2008
<Func Name='Do_sqlShutDownRANUInstance'>
Service SQLEXPRESS with parameters '' is being started at Sat Mar 08 21:39:12 2008
Unable to start service (3)
Error Code: 0x80070003 (3)
Windows Error Text: The system cannot find the path specified.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls:ervice:tart
Source Line Number: 316
---- Context -----------------------------------------------
Setting status of unmanaged components and removing unmanaged resources
Error Code: 3
MSI (s) (D0!64) [21:39:17:257]: Product: Microsoft SQL Server 2005 -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (3) The system cannot find the path specified.
.
Hi all,
I have installed SQL server 2005 express edition with SQL server Management studio express (SSMSE).
I have installed also SQLce and I would know how I can manage sql compact edition databases (.ldf) with sql SSMSE, if it is possible!
I would be grateful if you could explain it trought a detailed guide (I am a beginner user of sql server tools) or trought a link to useful sites.
I'm Looking forward for your reply and still trying...
Alessandro
I'm trying to import a database. It seems my most likely route is via Excel, so I've moved my tables in there.
Then I tried setting up Excel as a linked server as described in http://support.microsoft.com/default.aspx?scid=kb;en-us;Q321686
My linked server gets created apparently with no errors, but I can't see any contents when I click on it in the object explorer.
Anyone with more clues than me?
thanks
also i was wondering, that i have been reading that with this sp2 for sql server 2005 express you are able to use the dts wizard, is this true? i have a few databases in access that i would like to import into sql, would i have to create the tables first in sql then import or will the import also bring the tables & structure in?
thank you to all
[Note: originally posted this on microsoft.public.sqlserver.programmingbut had no luck there...sorry if you're seeing this twice]Some facts:1) I have an Access database (.mdb file) sitting on my harddrive.2) I have Visual Studio 2005, Sql Server Express, and Sql ServerManagement Studio Express.3) I do *not* have Microsoft Access.What I'm trying to do:I simply want to import the Access database into Sql Server Express. Inother words, I want to end up with a Sql Server Express database thathas all the same tables, keys, and relationships as the Access databaseas well as all the data from it. I can live without the queries storedin the Access database, but those would be nice too.What I've tried so far:I'm able to connect to the Access database using the "Linked Servers"features in Management Studio Express. From there, I was able to writesome simple Transact-SQL queries to find out what tables are in theAccess database and copy them, one at a time, into a Sql Server Expressdatabase.This is definitely a good start, but it doesn't take care of theprimary keys or foreign keys. There appear to be procedures for thoseas well (sp_primarykeys, sp_foreignkeys), but I keep thinking theremust be an easier way.Which brings me to...Questions:Without having to buy additional software/tools, can I import thisAccess database without a lot of programming? If so, how?Thanks in advance,-Dan
View 1 Replies View Related(1) I have already installed of SQL Server 2005 Developer Edition first.
(1) Can I install visual studio 2008 without the 2005 express edition of SQL server? Will be any problems because I don't have express edition of SQL server? Do I need to install the express edition of SQL server as well?
(3) How to use SQL Server 2005 Developer Edition instance on visual studio 2008?