Dear All
i have a problem In Query Analyzer .When I create two diffrent table with two diffrent schemas dbo and guest but when i log on query analyzer and run query from guest schema's tahle it gives error object not found i think its some rights problem ..
How do I update a table of 600 records with varying amounts of the same branch names say, there are 60 records that are Atlanta etc.Based on the following query that retrieves the Branch Id. Select t1.Branch, t2.SCName, SCID from WWFE07BoothLeads As t1JOIN SMC_New_Products.dbo.SupportCenters As t2ON t2.SCName Like t1.Branch+'%'Update WWFE07BoothLeads Set BoothId = ?(1) Where Branch = ?(Atlanta)
View 2 Replies View RelatedI am trying to import a sql table with Query Analyzer. I opened up the Query Analyzer, found the sql table I needed, opened it and it read everything in the table. I see the execution script that defines the headers and the data type for all the columns and the information populated below that. So I told it to "Run".
It says it is executing the query batch, I see the globe spinning like it is doing something, it says it is on line 10, row 43 (whatever that means), so it appears to be still working.
I stopped one of the Query Analyzers and noticed this message: "The name 'T' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted"
One of the many lines that it began having issues with this is:
insert into TABLENAME values(1,'AAVS','ANALYZER','S310','','357C','855','776493','DIG VID ANLZR CORE MOD','P','VOTE5WBKAA',207610,'207610--1','CO','','1','','1','S310','ADVANCED AUDIO VISUAL SYSTEMS',T);
It appears that it does not much care for the 'T' at the end of each row. Is this required? Is there a way to take it out of the entire table before running it again?
Is there a way to choose what information I want to populate?
Currently the header script shows this:
CREATE TABLE TABLENAME (
BCKEY Numeric,
MFG Character(4),
DWG Character(11),
LIST Character(25),
SERIES Character(6),
FRC Character(5),
ECN Character(3),
CPR Character(6),
DSC Character(22),
EQTYPE Character(2),
CLEI Character(10),
ECI Numeric,
BARCODE Character(9),
OS Character(2),
OFC Character(2),
UC Character(2),
FILLER Character(8),
INDCODE Character(1),
PN Character(25),
EPN Character(39),
DWGNN Logical);
insert into TABLENAME values(1,'AAVS','ANALYZER','S310','','357C','855','776493','DIG VID ANLZR CORE MOD','P','VOTE5WBKAA',207610,'207610--1','CO','','1','','1','S310','ADVANCED AUDIO VISUAL SYSTEMS',T);
What if I only want some of these fields? Is there a way to tell it that I only want: BCKEY, MFG, LIST, SERIES, DSC, EQTYPE, CLEI, PN & EPN? The rest I do not want, so can I take the rest out somehow?
Thanks,
I have a table with two fields Part_num and Pic in SQL server 2000 Pic is of Image type. Is there a way I can save images for each part_num using Query analyzer?
View 6 Replies View RelatedHi,
I have the TAMCreate.sql file which contains the script to create all tables in the Database TAMaintenance. Its created and used in the SqlServer 2000. But i have only SqlServer 7. From the script i copy and paste each table and created upto 7 tables without any problem, when i create the 8th table i get the following error the code for the table
CREATE TABLE AA_Branch_Master(
Branch_Code varchar(15) CONSTRAINT PK_AA_Branch_Master1 PRIMARY KEY,
Branch_Name varchar(50) NOT NULL,
Branch_Opened datetime NOT NULL,
Branch_Location varchar(50) NOT NULL,
Branch_Province varchar(25) NOT NULL,
Branch_Incharge varchar(50) NOT NULL,
Branch_Remark varchar(150),
Branch_Status BIT(1))
go
Error:
Server: Msg 2716, Level 16, State 1, Line 1
Column or parameter #8: Cannot specify a column width on data type bit.
In the same way i have get the error or another table, rest of the tables are created successfully.
the code for the table
CREATE TABLE AA_Supplier_Master(
Supp_Code varchar(15) CONSTRAINT PK_AA_Supplier_Master1 PRIMARY KEY,
Supp_Name varchar(100) NOT NULL,
Supp_Address varchar(150) NOT NULL,
Supp_Contact_Person varchar(50) NOT NULL,
Supp_Paymode varchar(25) NOT NULL,
Supp_Tel1 varchar(25),
Supp_Tel2 varchar(25),
Supp_Fax varchar(25),
Supp_Postbox varchar(15),
Supp_Postal_Code varchar(15),
Supp_City varchar(50) NOT NULL,
Supp_Country varchar(50) NOT NULL,
Supp_Status BIT(1))
go
Error:
Server: Msg 2716, Level 16, State 1, Line 1
Column or parameter #13: Cannot specify a column width on data type bit.
Thankyou,
Chock.
Chock
Hi All !I open a table in Query Analyzer by right clicking on it andselecting 'Open' and when the data is displayed in the view pane Iwould like to be able to edit it. It seems however that tables markedas read only (as shown on the top bar e.g. SQL Query Analyzer - [OpenTable ServerName.DBName.dbo.TableName(read-only)] ) can not be editedwhereas the one that do not have that attribute infront of the name Ican edit. Is there a way I can change the read only attribute of atable so that I can edit data directly in the view pane?Please let me know if there is !Thanks a heap ! :)Harkirat
View 2 Replies View RelatedHi there,I struggle to get this going i would like to insert data into 2 tmptables in a view.If i run the code on it's own it works perfectly until i want to createa view it complains about the INSERTthis is my codeCreate view dbo.vew_SwitchesAsINSERT INTO tmpInsSelectDistinctBIV.DATE,BIV.ID,CA.NAME,BIV.IND,BIV.AMOUNT,BIV.UNITS,BIV.INAME,MB.NOfrom Cars BIVLEFT JOIN MountainBikes MBON MB.ID = BIV.IDAND MB.CLASS = BIV.CLASSAND MB.NUMBER = BIV.NUMBERAND MB.DATE = BIV.DATELEFT JOIN Caterpillars CAON CA.ID = MB.NOwhere BIV.CLASS = 'SWCH'and BIV.IND = 'IN'AND BIV.UNITS = 0AND BIV.AMOUNT <0ORDER BY BIV.DATE ASC------ Step 2 -------Into tmpOutsInsert Into tmpOuts ---- All Switches In ----SelectDistinctBIV.DATE,BIV.ID,CA.NAME,BIV.IND,BIV.AMOUNT,BIV.UNITS,BIV.NAME,MB.NOfrom Cars BIVLEFT JOIN Mountainbikes MBON MB.ID = BIV._IDAND MB.CLASS = BIV.CLASSAND MB.NUMBER = BIV.NUMBERAND MB.DATE = BIV.DATELEFT JOIN Caterpillars CAON CA.ID = MB.NOwhere BIV.CLASS = 'SWCH'and BIV.IND = 'OUT'AND BIV.UNITS = 0AND BIV.AMOUNT <0ORDER BY BIV.DATE ASC----------------------Step 3 ----------------SelectDistinctins.DATE,ins.ID,ins.NAME ,insIND,ins.AMOUNT/100 as AmountIn,outs.IND,outs.AMOUNT/100 as AmountOut,outs.NAME
Quote:
Hello,
How can I give default value to a field in a table which is already created, i.e. there is a table test and it have field test1 which is int(4). Now, I want to give a default value 0 to this field. As I am not able to access Enterprise Manager, I want to do it using Query Analyzer. How can I do this using Query Analyzer?
Thanks in advance,
Uday.
Hi All, Please let me know how we can need to run “SELECT” statement (in SQL SERVER query analyzer) for a table in different database without going/loading DATABASE B (i.e. without running “USE B”) e.g. we are in a database “A” and we need to run “SELECT” command for a table in Database say “B” without going/loading (i.e. without running “USE B”) the Database “B” Thanks in Advance J
View 3 Replies View RelatedWhen I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
THis is so annoying. I have 3 ADO executes in my program. THe first one creates a view, the second one performs an outer join on that view and returns a result set, the third execute drops the aforementioned view. THe program that is using this is installed on about 200 computers scattered across Germany and Italy, all querying the same MSsql server 7.0. THe queries run quite quick when few users are actively using the program (after hours for example). however in the heat of the day performance goes up and down dramatically with identical queries taking from 1 to 20 seconds to return their result set. Now I initially thought 'bandwidth issue out of our server'. However I noticed that if I take those three queries and run them from the sql server enterprise manager( running on the same computer as the aforementioned program) then the queries run instantly and the data is in my result pane in less than 2 seconds ALWAYS....even when the program is dogging it with 20 second delays before the result set returns. I know it is hanging on the return of the result set as I put a stop after before each ADO execute in order to check which one was eating up my time. Why is there this dichotomy between running the queries from my enterprise manager versus running them from an ADO object. Both are using TCP/IP (no named pipes involved). I havent monkied with the attributes of the ADO result set so they are all set to default.
I have used the sql server profiler to trace these queries and they always run in less than 33 milliseconds. THe duration is also never more than 33 milliseconds. THis stinks of a network resource issue but what always leads me somewhere else is how consistent the performance of the enterprise manager is when it runs the exact same three queries.
Here is my slightly edited connection string
Public Const connection_string = "Provider=SQLOLEDB;Server=000.000.000.000;" & _
"User ID=johndoe;Password=janedoe;Network=dbmssocn;" & _
"database=fidojoe"
Here are the 3 ADO executes:
conn.Execute (sqlstr_create_view)
Set resultset1 = conn.Execute(sqlstr_get_providers_by_DMISID)
conn.Execute (sqlstr_drop_view)
When I run query in excel it gives result with different column sequence. The same query gives result with different column sequence when used in query analyzer or VBA Macro. E.g., Select * from ABC.
result in Excel 2003 SQL OLE DB query
col-A col-B col-C
values...
Result with Query Analyzer and VBA Macro
col-c col-B col-A
values...
I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.
View 6 Replies View RelatedI am trying to determine which of three stored procedure designs arefastest in the Query Analyzer:One query is a straight SELECT query with all desired rows and a dozen(tblName.RowName = @param or @param = Null) filters in the WHEREstatement.One query populates a #Temp table with the UniqueIDs from the resultsof the SELECT query in the above example, then joins that #Temp tableto get the desired rows.One query users EXEC sp_executesql @sql, @paramlist, @paramin which the @param has the dozen filters.What I'm trying to determine is which is the fastest.Each time I run the query in Query Analyzer it returns the samerecordset (duh!) but with much different Time Statistics.Are the Time Statisticts THE HOLY QRAIL as far as determining which isfastest, and what so I want to look at, the Vale or the Average? Inotice there are different numbers of bytse sen and bytes received foreach of the three queries.Any illumination on this is appreciated.lq
View 4 Replies View RelatedHi there
Running query analyzer against two different server.
the first only need 1-2 secs to return the query result,
the other return 7-8 secs for the query result.
plz advice what could cause this slow performance?
thx
Is Query Analyzer being droped in MS-SQL 2005? I'm using Microsoft SQL
Server Managemant Studio and I couldn't find the Store Procedure node
and Query Analyzer anymore. Help is appreciated.
Say you have a state column with the name of a state in it. And you need to add a branchId to the table. I know I should not have it in there, and the application should use proper lookup tables, but that's not the case.
Can SQL Server query analyzer loop through and update the branchid field based on a lookup in a lookup table?
How would that be done?
Hi All,
I think I post this in a wrong section but I cant find forum for sql server and i just have a quick question
basically, I installed sql server 2005 and I need to debug a store procedure.1. Does query analyzer come with sql server 2005?2. If not how can I debug store procedure in sql server 2005?Thanks in advance
Does anyone know if there is a limitation in Query Analyzer in terms of the number of characters in a query that it will parse?
I am having a problem with some large queries, and I am not sure if it is Query Analyzer, or the SQL Server query parsing engine that is causing the problem.
The query just involves a simple SELECT statement, albeit for a large number of columns.
Hi,
I'm using SQL Server 7.0. I connect to one database in Query Analyzer and I can use the "Perform Index Analysis" option under the "Query" menu option. when I connect to one of our other databases, the "Perform Index Analysis" option under the "Query" menu option is disabled (greyed out). Does anyone know what the problem could be and how might I be able to enable this option.
Thanks in advance,
Darrin
Hello
In query Analyzer of SQL2000 when i select
2 Select Queries and Run it shows in same Window as 2 Grids
I have seen people using seperate grid option to view each query results in a Tab query results Pane in MSSQL 7.
Eg Select * from table1 (in one grid)
select * from table2 (in another grid)
like a TAB so that i can move from one tab to another.
Is it possible to do that in query Analyzer?
Regards
I would like to use the Query Analyzer to create a script that will prompt the user(dialog box) for a response in SQL Server 7.0. I found a post someone mentioned DBMS can return messages and using Query Analyzer.
Thanks for your help in advance.
I'm trying to do a couple of things with some different tables.
With the first table, I have first name and last name in two separate columns.
I'm trying to create a new ID column that would do the following.
Take the first 3 letters of the last name (and remove any non characters such as ',&) and the first 3 letters of the first name, and then combine them.
I know how to use substring to take the first three, and I know how to combine them, but I'm having problems removing the non alpha characters.
For example, if the columns looked as follows:
First Last
John O'Connor
I'd want the result to look like OCOJOH, however, I'm getting O'CJOH.
The second issue is how would I do something similar if the First and Last Name were in the same column and string.
For example, if the column looks as follows:
Name
John O'Connor Publishing
I'd like to pull the first 3 from the first string before the space and then the next 3 so it would be as follows:
JOHOCO
Finally, I want to compare these new IDs, and add numbers to them.
So if I had the following
First Last
John O'Connor
Johnny O'Connell
The first would be OCOJOH01
The second would be OCOJOH02
If there are not any duplicates with the new ID, I'd like to call it OCOJOH01 and then move on.
Any help/ideas would be greatly appreciated.
Thanks
Hi;
I would like to change the format of dates that is in colum using query analyzer. The name of the colum is StartD and this how they look: 3292006 I would like to insert the / / . Can someone show me how to accomplish it.
Thank you
I have a database with couple of store procedure and views.
Is there any way that i can find out all sp or views which contains word like *svc*. I am talking about the containt of the sp and views not name.
We are replacing one module so i have to change the all sp and views which use table or view start with svc.
Need help.
Thanks
in the market place that will run a query on multiple DBs acrossmultiple servers? Without having to manually connect to each server?If so, can anyone provide a link for it.Thanks
View 3 Replies View RelatedI am new to SQL and need help running a performance check on our companies dtabase. I use SQL Enterprise Manager 2000. Could someone please help me accomplish this?
Thanks,
Carl
hi everybody!
this is my first post, so I'd like to say hallo to everyone!
I "work" on SQL Server 2000, and I would like to ask you a question.
Is it correct that i cannot set a database user as database owner (using command sp_changedbowner 'user_name')?
QA returns this error message:
"Server: Msg 15110, Level 16, State 1, Procedure sp_changedbowner, Line 46
The proposed new database owner is already a user in the database."
so I have to use sp_revokedbaccess and then I can change the db owner.
why can't a db user be the db owner?
thanks for the answers!!
Hi,
Was wondering if anyone can tell me how to get the Query Analyzer Tool installed to WM6 Professional Emulator inside of VS05?
Thanks,
John.
Hello,
how is the query analyzer opening a database??? Does someone knows the command it uses to open the connection ??
I ask this because i have corrupted datafiles stored on a flash card which i can not open with connection.open but the analyzer opens them normally. After that i can open the datafiles using normal code
Does it use any special params?? I get the corrupted files on power down and after that i can not open them from my application. I can only do this after i open them once with the query analyzer
The database is about 20 MB stored on a flash card
Thanks in advance
Say I have this query in my stored procedure. The problem I am facing is @OrgUID contains no value, so I put these 2 lines to debug. Am I using the right way to debug? I couldn't see the value of @OrgUID using this way. OrgUID is the PK in Organization. INSERT INTO Organization (OrgName) VALUES (@DealerName)SELECT @OrgUID = @@IDENTITYprint @OrgUIDreturn
View 4 Replies View RelatedThis has got to be a simple one, but I could not find out how
I have this simple proc for test purposes only...
ALTER PROCEDURE dbo.RotoTest( @strSSN VARCHAR(11), @blnUseACHDate BIT = 0, @intInvestorId int = 0)ASreturn 5
Thats right it does nothing but return 5 and thats because I removed all the real code to simplify my question.
When I hit this proc in SQL Query Analyzer..
exec RotoTest '123-45-6789', 0, 1 No return value is displayed in Query Analyzer.
When I try something like this
exec RotoTest '123-45-6789', 0, 1, intRetValue Output (in this situation I get wrong number of arguments)
How can I get a return value displayed on my screen in SQL QUERY ANALYZER with out modifying the proc? I do not want to modify the proc in anyway (because I can't), I just want to display the return value
Hi I have a following SP that does not return results. Could somebody tell me what I am doing wrong here.
CREATE procedure dbo.wfiDocuments_Get
(
@ModuleIdint,
@PortalIdint,
@IsActivebit=NULL
)
AS
declare @SQL nvarchar(4000)
SET @SQL =
'select
DocumentId,
ModuleId,
PortalId,
CreatedByUserId,
''CreatedByUserName'' = Users.FirstName +'' '' + Users.LastName,
CreatedDate,
Title,
Category,
Syndicate,
Clicks,
Size,
Description,
FileName,
VPath,
IsActive
from wfiDocuments
left outer join Users on wfiDocuments.CreatedByUserId = Users.UserId
where PortalId=@Portal and ModuleId =@Module'
IF @IsActive IS NOT NULL
SET @SQL = @SQL + ' AND IsActive=@Active'
SET @SQL = @SQL + ' ORDER BY Title'
EXEC sp_executesql @SQL,
N'@Portal INT,@Module INT,@Active bit',
@PortalId,@ModuleId,@IsActive
GO