Include / In Select Statement

Mar 21, 2006

I wanted to create something like this:
Select (FirstItem + "/" + SecondItem) AS Item

but I get error. Is there anything wrong with this code?

P.S. I'm using mssql 2000

View 2 Replies


ADVERTISEMENT

Include ID Field In GROUP BY Statement

May 15, 2007

I've got a query where i need to return a max value based on a select but one of the fields i need to return in the results is the records primary key ID No. This messes up the MAX bit and means that all results are returned, not just the max one.
 The query i'm using is very long so i've simplified what i mean by the example below. Say i have a table 'Fruits':
ID      FruitName      Cost1       Apple             0.452       Apple             0.633       Apple             0.524       Pear              0.895       Pear             0.83
And run the query:
select max(Cost),FruitName From Fruitsgroup by FruitName
It'll correctly return:
FruitName      CostApple             0.63Pear              0.89
Now i need the ID also returned by my query so i go:
select max(Cost),FruitName,ID From Fruitsgroup by FruitName,ID
This doesnt return the above results with the ID appended to it, it instead returns:
ID      FruitName      Cost1       Apple             0.452       Apple             0.633       Apple             0.524       Pear              0.895       Pear             0.83
As the ID is always distinct and therefore messes up the grouping. How in this instance would i return the correct result of:
ID      FruitName      Cost2       Apple             0.634       Pear              0.89
 Thanks.

View 9 Replies View Related

How To Include A Word With Apostrophe In Statement Without Getting Error Msg

Jul 17, 2013

How do you include a word with an apostrophe in an SQL in statement without getting an error msg? For example this syntax:

where provname1 IN ('Children's')

With that syntax above, I would get an error message.

View 4 Replies View Related

Sql Select To Include Date?

Apr 19, 2008

I have a table of parts and want to display some statistics from it.  The parts table has several fields in it, but the two that I need to use in my sql select queries are "PartUserID" and "DateUseBy", but I don't know how to use the "dateuseby" in the second example.Can someone help me out with #2?1. Display the total number of parts owned by a user:SQL Query:        SelectCommand="SELECT COUNT (*) FROM [ZCPart] WHERE (ZCPart.PartUserId = @PartUserId)"        OnSelecting="sqlPartCount_Selecting">        <SelectParameters>            <asp:Parameter Name="PartUserID" />        </SelectParameters>Code-behind:    protected void sqlPartCount_Selecting(object sender, SqlDataSourceSelectingEventArgs e)    {        e.Command.Parameters["@PartUserID"].Value = Membership.GetUser().ProviderUserKey;    }    2. Display the total number of parts owned by a user that are to be used in the current year. The table has a field "dateuseby" that should be used for the "Where" but I don't know how to get it.SQL Query:How to I include the "usebydate" so that it will use 2008 as the year ? I wrote the following query as an example of what I'm trying to get.        SelectCommand="SELECT COUNT (*) FROM [ZCPart] WHERE (ZCPart.PartUserId = @PartUserId, ZCPart.DateUseById = @PartUseById)"         onselecting="sqlPartYearCount_Selecting">        <SelectParameters>            <asp:Parameter Name="PartUserID" />            <asp:Parameter Name="DateUseByID" />        </SelectParameters>Code-behind:    protected void sqlPartYearCount_Selecting(object sender, SqlDataSourceSelectingEventArgs e)    {        e.Command.Parameters["@PartUserID"].Value = Membership.GetUser().ProviderUserKey;                // ? How do I change the date in the field to be in "2008" format and then put that in the sql query?        //e.Command.Parameters["@DateUseByID"].Value = currentYear;        //currentYear currentDateTime = DateTime.Now;    }

View 7 Replies View Related

Update Statement To Include Multiple Parameterised Input

Oct 18, 2006

I want to do an update query like the following:UPDATE tblUserDetails SET DeploymentNameID = 102 WHERE (EmployeeNumber = @selectedusersparam)Is there some simple way to add the @selectedusersparam as value1,value2,value3 etc. or do I have to input it with this type of syntax:UPDATE dbo_tblUserDetails SET dbo_tblUserDetails.DeploymentNameID = 102WHERE (((dbo_tblUserDetails.EmployeeNumber)=value1 Or (dbo_tblUserDetails.EmployeeNumber)=value2));Help appreciated.Many thanks.

View 5 Replies View Related

Transact SQL :: Update Statement To Include Multiple Records At Once

Apr 20, 2015

I have this update statement that works for one record. How do I write it to include multiple records at once. Please see sample below.

update
mklopt
set
 FRMDAT =
'12/31/2014'
where
 JOBCOD =
'PH14789' 

I also want to include the following instead of running it one at a time

PH17523    
PH17524    
PH17525    
PH17553    
PH17555    
PH17556    
PH17557    
PH17558    
PH17571    
PH17573    
PH17574    
PH17575    
PH17576    
PH17577    
PH1757

View 9 Replies View Related

Does The Group By Have To Include All Fields From The SELECT Clause?

Dec 3, 2007

hey all,

say i have the following function

SELECT GLF_CHART_ACCT.DESCR1, F1ADR_ADDRESS.ADDR1, F1ADR_ADDRESS.ADDR2,
F1ADR_ADDRESS.ADDR3, F1ADR_ADDRESS.ADDR_CITY, F1ADR_ADDRESS.ADDR_STATE,
F1ADR_ADDRESS.POST_CODE, F1ADR_ADDRESS.PHONE_NBR, F1ADR_ADDRESS.FAX_NBR,
F1ADR_ADDRESS.EMAIL_ADDR_NAME, F1ADR_ADDRESS.CONTACT_NAME,
F1ADR_ADDRESS.CONTACT_TITLE, GLF_CHART_ACCT.ACCNBRI, F1ADR_ADDRESS.ENTITY_UNIQUE_NBR

FROM GLF_CHART_ACCT

INNER JOIN F1ADR_ADDRESS ON (GLF_CHART_ACCT.CHART_NAME = F1ADR_ADDRESS.ENTITY_KEY1)
AND (GLF_CHART_ACCT.ACCNBRI = F1ADR_ADDRESS.ENTITY_KEY2)

GROUP BY GLF_CHART_ACCT.DESCR1, F1ADR_ADDRESS.ADDR1, F1ADR_ADDRESS.ADDR2,
F1ADR_ADDRESS.ADDR3, F1ADR_ADDRESS.ADDR_CITY, F1ADR_ADDRESS.ADDR_STATE,
F1ADR_ADDRESS.POST_CODE, F1ADR_ADDRESS.PHONE_NBR, F1ADR_ADDRESS.FAX_NBR,
F1ADR_ADDRESS.EMAIL_ADDR_NAME, F1ADR_ADDRESS.CONTACT_NAME, GLF_CHART_ACCT.ACCNBRI,
F1ADR_ADDRESS.CONTACT_TITLE, GLF_CHART_ACCT.CHART_NAME, F1ADR_ADDRESS.ENTITY_UNIQUE_NBR,
GLF_CHART_ACCT.SELN_TYPE1_CODE

HAVING CHART_NAME='ARCHART' AND GLF_CHART_ACCT.DESCR1 <> '' AND GLF_CHART_ACCT.SELN_TYPE1_CODE = 'Trade'
AND GLF_CHART_ACCT.DESCR1 LIKE '%" + Search + "%' ORDER BY GLF_CHART_ACCT.DESCR1;

I get errors if not all the fields are included in the group by clause.

what i dont get is why i have to create seperate groups for this query...or am i reading it wrong??

Cheers,

Justin

View 5 Replies View Related

T-SQL (SS2K8) :: Include Row Values As Columns In Select Query

Apr 28, 2015

How to include row values as columns in my select query. I have a table that stores comments for different sections in a web application. In the table below, I would like display each comment as a new column. I only want one row for each record_ID.

Existing table layout

table name - tblcomments
Record_ID Comment_Section_ID Comment
1 5 Test 5 comment
1 7 Test 7 comment
2 5 New comment
2 7 Old comment
3 5 Stop
3 7 Go

Desired table layout
table name - #tempComment
Record_ID Comment_Section_5 Comment_Section_7
1 Test 5 comment Test 7 comment
2 New comment old comment
3 Stop Go

Once I figure out how to get the data in the layout above, I will need to join the table with my record table.

table name - tblRecord
Record_ID Record_Type_ID Record_Status
1 23 Closed
2 56 Open
3 67 Open
4 09 Closed
5 43 In progress

I would like to be able to join the tables in the query below for the final output.

Select r.Record_ID, r.Record_Type_ID, r.Record_Status,
c.Comment_Section_5, c.Comment_Section_7
from tblRecord r
left outer join #tempComment c
on r.record_ID = c.record_ID

How I can get the data in the desired #tempComment table layout mentioned above?

View 2 Replies View Related

SQL 2012 :: Include Columns In Index That Are In Where Clause / Select List And Join

Jun 2, 2014

Usually it is better to include the columns in the index that are in where clause, select list and join.I am thinking that the columns in the selected list is better to keep as index columns and the columns that are in the where clause is better to keep in key columns.Where do we use join column is it better to create as main key column or included column.

View 4 Replies View Related

Select Statement Within Select Statement Makes My Query Slow....

Sep 3, 2007

Hello... im having a problem with my query optimization....

I have a query that looks like this:


SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)


it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...

View 3 Replies View Related

How To Select All Dates Upto Todays Date And Include The First Next Future Date

Jan 11, 2006

hello
how can i select all dates upto todays date and include the first next future date in a given data base

say todays date was the 01/06/2006 (MM,DD,YYYY)

below is a mock data base
id date (MM,DD,YYYY)
1 01/02/2006
2 01/04/2006
3 01/06/2006
4 01/09/2006
5 01/20/2006

i want to select all dates equal or less that 01/06/2006 and include the first next future date .. and in this case it would be 01/09/2006

so the results would return

1 01/02/2006
2 01/04/2006
3 01/06/2006
4 01/09/2006

View 2 Replies View Related

Multiple Tables Used In Select Statement Makes My Update Statement Not Work?

Aug 29, 2006

I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly.  My problem is that the table I am pulling data from is mainly foreign keys.  So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys.  I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit.  I run the "test query" and everything I need shows up as I want it.  I then go back to the gridview and change the fields which are foreign keys to templates.  When I edit the templates I bind the field that contains the string value of the given foreign key to the template.  This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value.  So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors.  I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode.  I make my changes and then select "update."  When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing.  The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work.  When I remove all of my JOIN's and go back to foreign keys and one table the update works again.  Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People].  My WHERE is based on a control that I use to select a person from a drop down list.  If I run the test query for the update while setting up my data source the query will update the record in the database.  It is when I try to make the update from the gridview that the data is not changed.  If anything is not clear please let me know and I will clarify as much as I can.  This is my first project using ASP and working with databases so I am completely learning as I go.  I took some database courses in college but I have never interacted with them with a web based front end.  Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian 

View 5 Replies View Related

SQL Server 2012 :: Create Dynamic Update Statement Based On Return Values In Select Statement

Jan 9, 2015

Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".

Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.

View 4 Replies View Related

Using Conditional Statement In Stored Prcodure To Build Select Statement

Jul 20, 2005

hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if

View 2 Replies View Related

TSQL - Use ORDER BY Statement Without Insertin The Field Name Into The SELECT Statement

Oct 29, 2007

Hi guys,
I have the query below (running okay):



Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01

The results are just as I need:


Field01 Field02

------------- ----------------------

192473 8461760

192474 22810



Because other reasons. I need to modify that query to:



Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:

Field02

----------------------

22810
8461760

And what I need is (without showing any other field):

Field02

----------------------

8461760
22810


Is there any good suggestion?
Thanks in advance for any help,
Aldo.

View 3 Replies View Related

How To Write Select Statement Inside CASE Statement ?

Jul 4, 2006

Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?

following part of the procedure clears my requirement.

SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E

can any one help me in this?
please give me a sample query.

Thanks and Regards,
Kiran Suthar

View 7 Replies View Related

Transact SQL :: Update Statement In Select Case Statement

May 5, 2015

I am attempting to run update statements within a SELECT CASE statement.

Select case x.field
WHEN 'XXX' THEN
  UPDATE TABLE1
   SET TABLE1.FIELD2 = 1
  ELSE
   UPDATE TABLE2
   SET TABLE2.FIELD1 = 2
END
FROM OuterTable x

I get incorrect syntax near the keyword 'update'.

View 7 Replies View Related

How To Use Select Statement Inside Insert Statement

Oct 20, 2014

In the below code i want to use select statement for getting customer

address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname

from customer table.Rest of the things will be as it is in the following code.How do i do this?

INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,

[code]....

View 1 Replies View Related

Help With Delete Statement/converting This Select Statement.

Aug 10, 2006

I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID

I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:

SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180

View 1 Replies View Related

Select Statement Problem - Group By Maybe Nested Select?

Sep 17, 2007

Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt 

View 2 Replies View Related

SQL Select Statement To Select The Last Ten Records Posted

Aug 6, 2007

SELECT Top 10    Name, Contact AS DCC, DateAdded AS DateTimeFROM         NameTaORDER BY DateAdded DESC
I'm trying to right a sql statement for a gridview, I want to see the last ten records added to the to the database.  As you know each day someone could add one or two records, how can I write it show the last 10 records entered.

View 2 Replies View Related

Using Select Statement Result In If Statement Please Help

Jul 11, 2007

Hello
How can i say this I would like my if statement to say:  if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated

View 2 Replies View Related

If STATEMENT Within Select Statement Syntax

May 15, 2008

Hi,

I am a newbie to this site and hope someone can help....

I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:

if(TL_flag= '1', "yes") as [Trial Leave]

it is coming up with an error.... I can use Select case but I should not need to as this should work?

Any ideas?

View 2 Replies View Related

Can I Use SELECT Statement To Select First 100 Record????

Apr 21, 1999

I would like to exec a select statement in VB/C++ to return first 100 records? What is the SQL statement should be?

Thanks,

Sam

View 1 Replies View Related

Select Statement With Count Within Another Select

Aug 23, 2013

I am using three tables in this query, one is events_detail, one is events_summary, the third if gifts. The original select statement counted the number of ids (event_details.id_number) that appear per event_name (event_summary.event_name).

Now, I would like to add in another column that counts the number of IDs that gave a gift who attended an event that were also listed in the event_ details table. So far I have come up with the following. My main issue is linking the subquery properly back to the main query. how to count in the sub-query and have the result placed within the groups results in the main query.

SELECT es.event_name, es.event_id, COUNT(ed.id_number) Number_Attendees,
(
SELECT COUNT(gifts.donor_id) AS Count2
FROM gifts
WHERE gifts.donor_id = ed.id_number
) subquery2

[code]....

View 1 Replies View Related

SQL Server 2012 :: Select Statement That Take Upper Table And Select Lower Table

Jul 31, 2014

I need to write a select statement that take the upper table and select the lower table.

View 3 Replies View Related

Using IF...Else Statement SELECT Statement

Sep 7, 2006

 

Hi All,

Can some one point me in the right direction in how to construct my SQL query within my cursor?

I Have got a cursor which i am using to iterate through a table, What i am trying to do is in my statement(used to open the cursor) is compare 2 tables (the one which my cursor is iterating) to see if there is a matching row in the other table (using  both tables ID's Like So:

SELECT column_List
FROM Table1
WHERE Table1_id = Table2_id  


 so for each row  my cursor checks if there is a corresponding match in  table2... but i would like to write to an error log

and do other statements if there is no match

 how do i add this condition to my statement either using an if...else statement proceeding to the next row?

here is the statment i attempted to write:

SELECT column_List
FROM table1
WHERE
 Table1_id = Table2.id

now i want to incoporate the statements below into the statement above as a condition when table1.id <> table2.id    


IF  table1.id <> table2.id    

BEGIN
   SET @DebugMessage = 'data not live.'
   RAISERROR (@DebugMessage, 16, 1) WITH LOG
  END

essentially what i am trying to sayin my statement is:

 go to the first row

check if it has a match in table 2,

 if there is no match execute a number of statements such as error loging e.t.c

go to the next row

 repeat the previous statements 

 

...i also looked through some Case...When statements am just not sure how to put in the condition

thanks in advance

 

View 1 Replies View Related

SQL SELECT Statement

Jul 5, 2006

I am a newbie to SQL.  I have a table (AenComponent) with three columns (State1, State2, State3).  Each column has a set of numeric values.  I would like to get a number count from all of the rows that contain the value of 1, no matter which column they are in.
 
I have tried
SELECT     COUNT(*) AS Expr1FROM        AenComponentWHERE     (State1 = 1) OR (State2 = 1) OR (State3 = 1)
but it does not give me an accurate count.  Any help would be appreciated.
 
thanks
rusty
 

View 4 Replies View Related

Need Help With Select Statement

Dec 29, 2006

I'm trying to get a list of clients and their sum of total pmts, their pmt level, and pmt level description by date range.
Here is what I’ve tried and it will not work. I need to do this without using temp tables.
SELECT C.ClientID, SUM(P.AmountPaid) AS SumOfpmts, tblpmtLevels.pmtLevel, tblpmtLevels.DescriptionFROM         tblPmts AS PL INNER JOIN                      tblPmtReceipts AS P ON PL.PmtID = P.PmtID INNER JOIN                      tblClients AS C ON PL.ClientID = C.ClientID INNER JOIN                      tblPmtLevels ON SUM(P.AmountPaid) >= tblPmtLevels.PmtLevelLow AND SUM(P.AmountPaid) <= tblPmtLevels.PmtLevelHighWHERE     (P.PaymentDate BETWEEN @Start AND @End)GROUP BY C.ClientID
Please provide any help you can, 

View 4 Replies View Related

SQL SELECT Statement

Mar 13, 2007

Hello, Is there a SQL SELECT Statement that can remove the time part in my DataTable. see example below
This is what I have in the first column 0 -   MM/dd/yyyy 12:00:00 AM
This is what I want   -   MM/dd/yyyy
I would rather do it in the SELECT statement instead of doing it in my DataTable using the FORMAT function.
Thanks
Steve

View 5 Replies View Related

Using An SP In A Select Statement

Apr 18, 2007

I have a stored procedure that works like this
getCountryByIPAddress @ipaddr='1.2.3.4'
returns a single 2 char column.
I want to use it in a select statement similar to:
select customername, @country=(exec getCountry @ipaddr=customer.customeripaddress) from customer
I'm intend to receive a list of customer names and the 2 char result of GetCountry based on the customeripaddress field of the customer table.  What I get is a syntax error near Exec and then another one near '.'
Is there another way to accomplish this that I am not seeing?
Ryan
 

View 6 Replies View Related

Select Statement Help

May 29, 2007

Hi,
I am trying to select only the most recent record added to a table per user.  Say the table has a userid, date, and a color and may look like this:
2 5/06/07 red
8 5/3/07 grey
2 5/13/07 green
4 4/30/07 orange
8 4/26/07 yellow
And I want, in any order:
2 5/13/07 green
8 5/3/07 grey
4 4/30/07 orange
 
Thanks for any help.
Greg

View 3 Replies View Related

Help With Select Statement

Jun 19, 2007

Hi, i've run into a problem with a nested query. Consider this:SELECT VehicleRef, Type, Manufacturer, Model, Derivative, isLimited, Term, MilesPA, CH FROM vwVehicles WHERE type='Car' AND manufacturer='Audi' AND model='A3'I get the following results1 Car Audi A3 1.6 Special Edition 3dr 0 2 10000 229.991 Car Audi A3 1.6 Special Edition 3dr 0 2 10000 252.991 Car Audi A3 1.6 Special Edition 3dr 0 3 10000 219.991 Car Audi A3 1.6 Special Edition 3dr 0 3 10000 242.991 Car Audi A3 1.6 Special Edition 3dr 0 2 20000 252.991 Car Audi A3 1.6 Special Edition 3dr 0 2 20000 296.991 Car Audi A3 1.6 Special Edition 3dr 0 3 20000 241.991 Car Audi A3 1.6 Special Edition 3dr 0 3 20000 291.991 Car Audi A3 1.6 Special Edition 3dr 0 2 30000 274.991 Car Audi A3 1.6 Special Edition 3dr 0 2 30000 340.991 Car Audi A3 1.6 Special Edition 3dr 0 3 30000 264.991 Car Audi A3 1.6 Special Edition 3dr 0 3 30000 339.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 2 10000 227.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 2 10000 249.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 3 10000 220.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 3 10000 244.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 2 20000 253.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 2 20000 298.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 3 20000 244.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 3 20000 292.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 2 30000 279.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 2 30000 344.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 3 30000 267.992 Car Audi A3 1.6 Special Edition Sportback 5dr 0 3 30000 339.99What I need is to only retrieve each vehicleID once, but with the best (lowest) CH price, I also need the term and mileage that corresponds with that price.I tried thisSELECT VehicleRef, Type, Manufacturer, Model, Derivative, isLimited, Term, MilesPA, CH FROM vwVehicles WHERE type='Car' AND manufacturer='Audi' AND model='A3' AND CH = (SELECT MIN(CH) FROM vwVehicles WHERE type='Car' AND manufacturer='Audi' AND model='A3' AND ch >=1 AND ch <=1000)This only returns 1 line though. Is there anyway to get the result I want using one query?Thanks

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved