Inconsistent Query Results
Apr 10, 2001
I am running SQL Server 7.0 on NT 4.0. I have created a simple query:
SELECT SUM(month1) As total_month1
FROM eac_manload
WHERE project_number = 8800
and dept IN (50,51,52,55,57,60,61,62,63,64,65,68,69)
I first time I run the query I get the correct result. Subsequent times that I run the query the result is 1 record with a Null value. The data has not changed. If I stop MSSQLSERVER and restart the service I get the correct result the first time and the Null value each time thereafter. Anybody out there with any idea of what is going on here? Any help will be appreciated!!
View 1 Replies
ADVERTISEMENT
Feb 26, 2007
Hello,
I have a linked server named 'Charlie_File' to an Excel Workbook that I set up in SQLServer 2005 Management Studio. The workbook is on my local C drive. Sometimes, I get the results back that I expect when I run the following query;
SELECT * FROM OPENQUERY(Charlie_file, 'SELECT * FROM [Feb$]')
Sometimes, on subsequent runs of the above query, I get the following message;
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "MSDASQL" for linked server "Charlie_file" reported an error. The provider did not give any information about the error.
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "Charlie_file".
There seems to be about a minute or so of a delay before the query will run correctly on subsequent attempts. Is there a connection issue here where a connection blocks subsequent attempts to select the data within a specific time span?
Thank you for your help!
cdun2
View 1 Replies
View Related
Apr 11, 2006
HiI have an oddity. If I run a piece of SQL:SELECT EmployeeNo, MailToFROM ST_PPS.dbo.Employeewhere AddedOn BETWEEN '01-jan-2006' and '01-feb-2006'AND MailTo NOT IN ( '3', 'x')order by MailToI get the resultsEmployeeNo MailTo----------- ------608384 1606135 1608689 1609095 1607163 1606165 1606472 1608758 1.....for 2594 rowsIf I create a stored procedure with the same SQL:-CREATE PROCEDURE dbo.PPS_testASSELECT EmployeeNo, MailToFROM ST_PPS.dbo.Employeewhere AddedOn BETWEEN '01-jan-2006' and '01-feb-2006'AND MailTo NOT IN ( '3', 'x')order by MailToGOand run it:-EXEC PPS_testI get three extra rowsEmployeeNo MailTo----------- ------607922 NULL606481 NULL605599 NULL606316 1608871 1607427 1608795 1.....for 2597Does anyone know what is happening here? It appears that the clause:-MailTo NOT IN ( '3', 'x')excludes NULL in raw SQL, but includes NULL (correctly I think) in astored procedure.Chloe CrowderThe British Library
View 5 Replies
View Related
May 5, 2008
Hi,
I am building a report with a recursive hierarchy for drill-down purposes. The hierarchy is built by querying a SSAS OLAP cube and defining a details grouping for the table/matrix.
Every time I run the report one or more of the leaf members in the recursive hierarchy "jumps" up to the highest level. First I thought that this may be due to the fact that the leafs parents are not part of the returned dataset. However, the queries makes sense and the "offending" members does never contain any data (while the query should return only non empty members) which is why this is a very strange behavior. Furthermore, the "offending" member differs between different executions of the report, despite the fact that the parameters is exactly the same and the cube is untouched between executions.
I am actually pressing "View Report", waiting for the report to execute and when I press "View Report" again, the returned datasets seem to differ, yielding different "offending" members in the report.
When I run the queries individually in the Data-tab in BIDS, the returned datasets are always the same. Execution caching is turned off for the report.
Checking against SSRS's ExecutionLog, the RowCount for consecutive executions with the exact same parameters differ. For example, RowCount:
3094
3080
3079
3088
3087
Why does SSRS behave such inconsistently? Any tips or tricks?
View 3 Replies
View Related
Jan 11, 2000
I have a stored procedure (see below), in which I would like to check if the create an identity column and make it a primary key succeeded. I check @@error after the exec statement. This used to pick up an error if the table already had an identity column. It has stopped doing that. Why? And, if this is not the way to capture the error after the exec statement, how do I do it?
CREATE PROCEDURE rasp_test3
/*
Written by Judith Farber Abraham
this procedure loops thru sysobjects looking for user tables.
If a user table, does it have a primary key?
If not, add an identity column to table and make it a primary key
*/
--would like to have sp in main db but use from all three
@fixDB nvarchar(50)--the db to which to add PKs
AS
Declare @TableName varchar(50)
Declare @TableID int
Declare @Msg varchar (50)
Declare @ColumnName varchar(50)
Declare @IndexName varchar(50)
Declare @MyCursor nvarchar(500)
declare @MyCursorC nvarchar(500)
declare @CName sysname
--Set @Msg = "********* Finished adding Ident fields *************"
/* */
/*
do for all user tables ( xtype = u )
*/
set @Mycursor = N'Declare SysCursor cursor for select Name, ID from ' + @fixdb +'.dbo.sysobjects where xtype = "u"'
execute sp_executesql @mycursor
open syscursor
Fetch next from SysCursor into @TableName, @TableID
/* -1 = no record; -2 = row deleted; 0 = got a row */
While (@@Fetch_status <> -1)
Begin
If (@@Fetch_status <> -2)
Begin /* have a user row (table) */
/* */
set @ColumnName = @TableName + 'ID'
set @IndexName = 'PK_' + @columnName
--only add ident and PK if no primary key in table
If not exists (Select * from Sysobjects where Parent_obj = @TableID and xtype = 'PK')
--add an identity column to user table and make it a Primary key
EXEC ('ALTER TABLE ' + @tablename + ' ADD ' + @columnName + ' INT IDENTITY CONSTRAINT ' + @IndexName + ' PRIMARY KEY ' )
--
Begin
--if error, assume already ident column, so find column name & make PK
print @@error
if @@error <> 0 print "jerror occured"
--set @MycursorC = N'Declare SysCursorC cursor for SELECT c.name
--FROM syscolumns c, sysobjects o
--WHERE ((c.id = o.id) AND (c.status = 128)) AND (o.name = ' + @tablename + ')'
--execute sp_executesql @mycursorC
--Open SyscursorC
--Fetch next from SysCursorC into @CName
--print @cname
--close syscursorc
--deallocate syscursorc
--Exec ('ALTER TABLE ' + @tablename + ' ADD ' + @columnName + ' INT IDENTITY CONSTRAINT ' + @IndexName + ' PRIMARY KEY ' )
--select @cname=c.name
--print c.name
End
End
Fetch next from SysCursor into @TableName, @TableID
End
--Print @Msg
Close SysCursor
Deallocate SysCursor
Return
Thanks for any help,
Judith
View 3 Replies
View Related
Jul 13, 2006
I'm testing some code to look up values from my database and update a specific field when certain conditions are met. I'm having trouble with some code that is giving me the results I expect when I submit one set of parameters, but is not finding anything in the database for another set, when I know the data exists.
Here's the code for my stored procedure, SP:
Code:
@flightid bigint,
@departuretime smalldatetime
SELECT flightid, flightno, departuretime, origincode, destinationcode
FROM flightschedules
WHERE flightid <> @flightid
AND departuretime = CONVERT(SMALLDATETIME, @departuretime, 120)
And here's the vbscript that calls it:
Code:
vOutboundID = 452
vReturnID = 453
'--- Get the flight details ---
strOrigin = "confirmflightdetails '" & vOutboundID & "';"
set rsOrigin = Server.CreateObject("ADODB.Recordset")
rsOrigin.Open strOrigin, objConn
response.write "origin " & rsOrigin("departuretime") & "<BR>"
strReturn = "confirmflightdetails '" & vReturnID & "';"
set rsReturn = Server.CreateObject("ADODB.Recordset")
rsReturn.Open strReturn, objConn
response.write "return " & rsReturn("departuretime") & "<BR>"
strGetOFID = "SP '" & vOutboundID & "', '" & rsOrigin("departuretime") & "';"
set rsOFID = Server.CreateObject("ADODB.Recordset")
rsOFID.Open strGetOFID, objConn
DO WHILE NOT rsOFID.EOF
response.write "OFNO " & rsOFID("flightno") & " " & rsOFID("flightid") & "<br>"
rsOFID.MoveNext
Loop
strGetRFID = "SP '" & vReturnID & "', '" & rsReturn("departuretime") & "';"
set rsRFID = Server.CreateObject("ADODB.Recordset")
rsRFID.Open strGetRFID, objConn
DO WHILE NOT rsRFID.EOF
response.write "RFNO " & rsRFID("flightno") & " " & rsRFID("flightid") & "<br>"
rsRFID.MoveNext
Loop
Here's the code for confirmflightdetails:
Code:
@flightid bigint
AS
SELECT flightid, flightno, departuretime
FROM flightschedules
WHERE flightid = @flightid
When confirmflightdetails is tested, I the proper results, as confirmed by the response.write statements:
4521092006-07-29 08:00:00
4531102006-07-29 12:05:00
I put the response.write statements and loops in so I could verify the functionality.
Here's what it produces:
out 452
ret 453
origin 7/29/2006 8:00:00 AM
return 7/29/2006 12:05:00 PM
OFNO 109 450
Here's what it should produce:
out 452
ret 453
origin 7/29/2006 8:00:00 AM
return 7/29/2006 12:05:00 PM
OFNO 109 450
RFNO 110 451
If I do this in query analyzer:
Code:
select flightid, flightno, departuretime
from flightschedules
where flightid > 449 and flightid < 454
this is what I get from the database:
flightid flightno departuretime origin destination
4521092006-07-29 08:00:00 A C
4501092006-07-29 08:00:00 A B
4531102006-07-29 12:05:00 C A
4511102006-07-29 13:15:00 B A
What I'm trying to do is look up the chosen flight, then find the flight with the matching origin/destination (the other flight leg) on the same day.
I can't figure out why it's working for one set of parameters and not for the other.
Thanks in advance for any help!
View 1 Replies
View Related
Jun 5, 2014
I have a lot of rows of hours, set up like this: 0745, 0800, 2200, 1145 and so on (varchar(5), for some reason).
These are converted into a smalldatetime like this:
CONVERT(smalldatetime, STUFF(timestarted, 3, 0, ':')) [this would give output like this - 1900-01-01 11:45:00]
This code has been in place for years...and we stick the date on later from another column.
But recently, it's started to fail for some rows, with "The conversion of a varchar data type to a smalldatetime data type resulted in an out-of-range value".
My assumption is that new data being added in is junk. If I query for these values and just list them (rather than adding a column to convert them also) that's fine, of course. I've checked all the stuffed (but not yet converted - so 11:45 rather than 1145) output to see if it ISDATE(), and it is. There are no times with hours > 23 or minutes greater than 59 either.
If I add the CONVERT in, we see the error message. But here's the oddity, if I place all of the rows into a holding table, and retry the conversion, there is no error. It's this last bit that is puzzling me. Plus I can't see any errors in the hours data that would cause a conversion problem.
I've put the whole of this into a cursor to try to trap the error rows too, but all processes fine. Why would it fail if NOT in a cursor?
View 9 Replies
View Related
Mar 11, 2015
Firstly may I say that the sproc I am having problems with and the service that calls it is inherited technical debt from an unsupervised contractor. We are not able to go through a rewriting process at the moment so need to live with this if possible.
Background
We have a service written in c# that is processing packages of xml that contain up to 100 elements of goods consignment data. In amongst that element is an identifier for each consignment. This is nvarchar(22) in our table. I have not observed any IDs that are different in length in the XML element.
The service picks up these packages from MSMQ, extracts the data using XPATH and passes the ID into the SPROC in question. This searches for the ID in one of our tables and returns a bool to the service indicating whether it was found or not. If found then we add a new row to another table. If not found then it ignores and continues processing.
Observations
The service seems to be dealing with a top end of around 10 messages a minute... so a max of about 1000 calls to the SPROC per minute. Multi-threading has been used to process these packages but as I am assured, sprocs are threadsafe. It is completing the calls without issue but intermittently it will return FALSE. For these IDs I am observing that they exist on the table mostly (there are the odd exceptions where they are legitimately missing). e.g Yesterday I was watching the logs and on seeing a message saying that an ID had not been found I checked the database and could see that the ID had been entered a day earlier according to an Entered Timestamp.
So the Sproc...
USE [xxxxxxxxxx]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code]....
So on occasions (about 0.33% of the time) it is failing to get a bit 1 setting in @bFound after the SELECT TOP(1).
The only suggestions I can make have been...
change @pIdentifier nvarchar(25) to nvarchar(22)
Trim any potential blanks from either side of both parts of the identifier comparison
Change the SELECT TOP(1) to an EXISTS
The only other thought is the two way parameter direction in the C# for the result OUTPUT. Not sure why he did it that way or what the purpose is.
I have been unable to replicate this using a test app and our test databases. Has observed selects failing to find even though the data is there, like this before?
View 6 Replies
View Related
Dec 5, 2007
I have a query that joins two large partitioned tables and depending on the values in the where clause, I can get dramatically different performance results.
The first query completed in around 7s and has 47,000 logical reads.
select mo.monitor_id,
mo.site_id,
mo.testtime,
sum(mo.NumBytes),
sum(mo.DNSTime),
sum(mo.ConnectTime),
sum(mo.FirstByteTime),
sum(mo.ContentTime),
sum(mo.RelocTime)
from monitor_raw mr(nolock), monitor_object mo(nolock)
where mr.monitor_id in (5339, 5341, 5342, 943842, 943866)
and mr.testtime between 'Oct 31 2007 3:00:00:000PM' and 'Nov 30 2007 3:00:00:000PM'
and mo.returncode = 200
and mr.site_id in (101,102,105,109,110,112,115,117,119,122,126,151,132,139,129,135,121,138,143,142,159,148,128,171,176,177,178,111,113,116,118,120,127,133,131,130,174,179,185,205,200,202,203,204,210,211,208,209,212,213,216,199,214,224,225,229,230,232,235,241,245,247,250,254,261,267,264,265,266,268,269)
and mr.escalationlevel = 0
and mr.monitor_id = mo.monitor_id
and mr.testtime = mo.testtime
and mr.site_id = mo.site_id group by mo.monitor_id, mo.site_id, mo.testtime
The second query takes 188s to complete and has 1.8m logical reads. The only difference between the two is the value of the monitor_ids in the where clause.
select mo.monitor_id,
mo.site_id,
mo.testtime,
sum(mo.NumBytes),
sum(mo.DNSTime),
sum(mo.ConnectTime),
sum(mo.FirstByteTime),
sum(mo.ContentTime),
sum(mo.RelocTime)
from monitor_raw mr(nolock), monitor_object mo(nolock)
where mr.monitor_id in (152682, 5339, 5341, 5342, 268080)
and mr.testtime between 'Oct 31 2007 3:00:00:000PM' and 'Nov 30 2007 3:00:00:000PM'
and mo.returncode = 200
and mr.site_id in (101,102,105,109,110,112,115,117,119,122,126,151,132,139,129,135,121,138,143,142,159,148,128,171,176,177,178,111,113,116,118,120,127,133,131,130,174,179,185,205,200,202,203,204,210,211,208,209,212,213,216,199,214,224,225,229,230,232,235,241,245,247,250,254,261,267,264,265,266,268,269)
and mr.escalationlevel = 0
and mr.monitor_id = mo.monitor_id
and mr.testtime = mo.testtime
and mr.site_id = mo.site_id group by mo.monitor_id, mo.site_id, mo.testtime
The two tables have clustered indexes on monitor_id, testtime and site_id. Comparing the execution plan, I can see why there is such a difference in performance. The second query performs a clustered index seek on the monitor_object table starting at the lowest monitor_id, testtime & site_id through the highest monitor_id, testtime & site_id. The first query performs a clustered index seek where the monitor_id, testtime and site_id equals the same values from the monitor_raw table.
My question is, how can I force the second query to use the same execution plan as the first so that I can get better performance?
One possible workaround that I could use is to execute five individual queries, one for each monitor_id and then union the results together but this would require significant code changes to my stored procs.
Thanks,
Tim
View 5 Replies
View Related
May 6, 2015
I am getting inconsistent results when BULK INSERTING data from a tab-delimited text file. As part of my testing, I run the same code on the same file again and again, and I get different results every time! I get this on SQL 2005 and SQL 2012 R2.We have an application that imports data from a spreadsheet. The sheet contains section headers with account numbers and detail rows with transactions by date:
AAAA.1234 /* (account number)*/
1/1/2015 $150 First Transaction
1/3/2015 $24.233 Second Transaction
BBBB.5678
1/1/2015 $350 Third Transaction
1/3/2015 $24.233 Fourth Transaction
My Import program saves this spreadsheet at tab-delimited text, then I use BULK INSERT to bring the data into a generic table full of varchar(255) fields. There are about 90,000 rows in each day's data; after the BULK INSERT about half of them are removed for various reasons. Next I add a RowID column to the table with the IDENTITY (1,1) property. This gives my raw data unique row numbers.
I then run a routine that converts and copies those records into another holding table that's a copy of the final destination table. That routine parses though the data, assigning the account number in the section header to each detail row. It ends up looking like this:
AAAA.1234 1/1/2015 $150 First Purchase
AAAA.1234 1/3/2015 $24.233 Second Purchase
BBBB.5678 1/1/2015 $350 Third Purchase
BBBB.5678 1/3/2015 $24.233 Fourth Purchase
My technique: I use a cursor to get the starting RowID for each Account Number: I then use the upper and lower RowIDs to do an INSERT into the final table. The query looks like this:
SELECT RowID, SUBSTRING(RowHeader, 6,4) + '.UBC1' AS AccountNumber
FROM GenericTable
WHERE RowHeader LIKE '____.____%'
Results look like this:
But every time I run the routine, I get different numbers! my results are not accurate. I get inconsistent results EVERY TIME.Here is my code, with table, field and account names changed for business confidentiality.This is a high profile project at my company;
TRUNCATE TABLE GenericImportTable;
ALTER TABLE GenericImportTable DROP COLUMN RowID;
BULK INSERT GenericImportTable FROM 'SERVERGeneralAppnameDataFile.2015.05.04.tab.txt'
WITH (FIELDTERMINATOR = ' ', ROWTERMINATOR = '
', FIRSTROW = 6)
[code]...
View 2 Replies
View Related
May 6, 2015
I am getting inconsistent results when BULK INSERTING data from a tab-delimited text file. As part of my testing, I run the same code on the same file again and again, and I get different results every time! I get this on SQL 2005 and SQL 2012 R2.
We have an application that imports data from a spreadsheet. The sheet contains section headers with account numbers and detail rows with transactions by date:
AAAA.1234 /* (account number)*/
1/1/2015 $150 First Transaction
1/3/2015 $24.233 Second Transaction
BBBB.5678
1/1/2015 $350 Third Transaction
1/3/2015 $24.233 Fourth Transaction
My Import program saves this spreadsheet at tab-delimited text, then I use BULK INSERT to bring the data into a generic table full of varchar(255) fields. There are about 90,000 rows in each day's data; after the BULK INSERT about half of them are removed for various reasons.
Next I add a RowID column to the table with the IDENTITY (1,1) property. This gives my raw data unique row numbers.
I then run a routine that converts and copies those records into another holding table that's a copy of the final destination table. That routine parses though the data, assigning the account number in the section header to each detail row. It ends up looking like this:
AAAA.1234 1/1/2015 $150 First Purchase
AAAA.1234 1/3/2015 $24.233 Second Purchase
BBBB.5678 1/1/2015 $350 Third Purchase
BBBB.5678 1/3/2015 $24.233 Fourth Purchase
My technique: I use a cursor to get the starting RowID for each Account Number: I then use the upper and lower RowIDs to do an INSERT into the final table. The query looks like this:
SELECT RowID, SUBSTRING(RowHeader, 6,4) + '.UBC1' AS AccountNumber
FROM GenericTable
WHERE RowHeader LIKE '____.____%'
Results look like this:
But every time I run the routine, I get different numbers!
Needless to say, my results are not accurate. I get inconsistent results EVERY TIME. Here is my code, with table, field and account names changed for business confidentiality.
TRUNCATE TABLE GenericImportTable;
ALTER TABLE GenericImportTable DROP COLUMN RowID;
BULK INSERT GenericImportTable FROM 'SERVERGeneralAppnameDataFile.2015.05.04.tab.txt'
WITH (FIELDTERMINATOR = ' ', ROWTERMINATOR = '', FIRSTROW = 6)
ALTER TABLE GenericImportTable ADD RowID int IDENTITY(1,1) NOT NULL
SELECT RowID, SUBSTRING(RowHeader, 6,4) + '.UBC1' AS AccountNumber
FROM GenericImportTable
WHERE RowHeader LIKE '____.____%'
View 3 Replies
View Related
Apr 1, 2007
hi, like, if i need to do delete some items with the id = 10000 then also need to update on the remaining items on the with the same idthen i will need to go through all the records to fetch the items with the same id right? so, is there something that i can use to hold those records so that i can do the delete and update just on those records and don't need to query twice? or is there a way to do that in one go ?thanks in advance!
View 1 Replies
View Related
Feb 12, 2008
Hello. I currently have a website that has a table on one webpage. When a record is clicked, the primary key of that record is transfered in the query string to another page and fed into an sql statement. In this case its selecting a project on the first page, and displaying all the scripts for that project on another page. I also have an additional dropdownlist on the second page that i use to filter the scripts by an attribute called 'testdomain'. At present this works to an extent. When i click a project, i am navigated to the scripts page which is empty except for the dropdownlist. i then select a 'testdomain' from the dropdownlist and the page populates with scripts (formview) for the particular test domain. what i would like is for all the scripts to be displayed using the formview in the first instance when the user arrives at the second page. from there, they can then filter the scripts using the dropdownlist.
My current SQL statement is as follows.
SelectCommand="SELECT * FROM [TestScript] WHERE (([ProjectID] = @ProjectID) AND ([TestDomain] = @TestDomain))"
So what is happening is when testdomain = a null value, it does not select any scripts. Is there a way i can achieve the behaivour of the page as i outlined above? Any help would be appreciated.
Thanks,
James.
View 1 Replies
View Related
May 28, 2008
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1
FROM testsupplierSCNCR
I am getting the result of 01/01/2007
but in query analizer I get the result of
12/31/2006
Why the different dates
View 4 Replies
View Related
Sep 22, 2015
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!!
-- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on
go
if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1
if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
View 2 Replies
View Related
Jul 30, 2015
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
I want to do it using SELECT. Is it possible?
View 13 Replies
View Related
Feb 12, 2008
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
View 3 Replies
View Related
Aug 2, 2012
linking two tables together to get an end result
find below the code i have used
The first part of the query provides me with the info i need
SELECT sub.*,
case when rm_sales_band = '2M to 4M' then 'Kirsty' else RM end as rm
into #rmtmp
[Code].....
View 1 Replies
View Related
Jul 10, 2015
I have a query that performs a comparison between 2 different databases and returns the results of the comparison. It returns 2 columns. The 1st column is the value of the object being compared, and the 2nd column is a number representing any discrepancies.What I would like to do is use the results from this 1st query in the where clause of another separate query so that this 2nd query will only run for any primary values from the 1st query where a secondary value in the 1st query is not equal to zero.I was thinking of using an "IN" function in the 2nd query to pull data from the 1st column in the 1st query where the 2nd column in the 1st query != 0, but I'm having trouble ironing out the correct syntax, and conceptualizing this optimally.
While I would prefer to only return values from the 1st query where the comparison value != 0 in order to have a concise list to work with, I am having difficulty in that the comparison value is a mathematical calculation of 2 different tables in 2 different databases, and so far I've been forced to include it in the select criteria because the where clause does not accept it.Also, I am not a DBA by trade. I am a system administrator writing SQL code for reporting data from an application I support.
View 6 Replies
View Related
Aug 22, 2005
Hi,New to .Net and SQL. I have two tables that I have joined together. RentalControl_Main has the rental informationd and an Adjuster ID that links to the ADjuster table and the adjusters name. I am trying to create a report that gives the "Single" adjuster name and the totals for all of their contracts. I have a details report that gives each contract info. for each specific adjusters rentals. However, I want to just list the adjuster once and give all of their totals. In my SQL statement I have all of it written out and just need to knowwhat to do in place of 'Alex Early' that will give me all of the distinct adjusters.Do I need to code this on the page with a do while loop?Appreciate any help.SELECT SUM(dbo.RentalControl_Main.Rate) / COUNT(dbo.RentalControl_Main.Rate) AS AmtAvg, SUM(dbo.RentalControl_Main.DaysBilled) / COUNT(dbo.RentalControl_Main.DaysBilled) AS DayAvg, SUM(dbo.RentalControl_Main.Rate * dbo.RentalControl_Main.DaysBilled) / COUNT(dbo.RentalControl_Main.Rate) AS TotAvgFROM dbo.RentalControl_Main INNER JOIN dbo.RentalControl_Adjuster ON dbo.RentalControl_Main.AdjusterID = dbo.RentalControl_Adjuster.AdjusterIDWHERE (dbo.RentalControl_Adjuster.AdjusterName = 'Alex Early' AND (dbo.RentalControl_Main.DateClose IS NOT NULL) AND (dbo.RentalControl_Main.AgencyID = '2')
View 1 Replies
View Related
Apr 20, 2004
I was wondering if there was a keyword that would allow you to return the number of results from a query such as (this is fake just giving an example so that someone can give me the real answer)
select TotalReturned
from table
where field=""
View 7 Replies
View Related
Oct 7, 1999
I am a beginner with SQL, so please excuse any ignorance here.
Under SQL 6.5, when executing a SELECT DISTINCT query against a table in a certain database, the results were returned alphabetized. Now, after migrating the database to SQL 7.0, the same query does not return the results alphabetized. If I add an index for the column specified in the query to the table, the results come back alphabetized. Is there any way to correct this other than adding indexes for all columns in all tables that are queried in this manner?
TIA,
Paige
View 2 Replies
View Related
Mar 2, 2005
I am running the same exact query in SQL 2000 and I get different results. Should I try running DBCC CHECKDB and look for errors?
View 5 Replies
View Related
Apr 30, 2008
Hi,
I have this line of code that when run in the query doesn't return anything:
srv.AGENT_S_ACC_CODE IN ('" & Replace(Replace(Parameters!arcode.Value," ",""),",","','") & "')
The parameter is setup and the query works when I hardcode it with a value but will not return anything with this, does anyone know why?
Thanks,
Rhonda
View 2 Replies
View Related
Feb 11, 1999
I need some advise on how to check the consistensy of a DateTime attribute.
Some of my Datetime field(s) won't read as a NULL and some does for example:
Select FileNo,DateReceived,DateEntered,DateFU from RECEIVING
where DateReceived is not null and DateEntered is not null and DateFU is not null
I should get several records but the result is zero.
Is there any articles out there about DateTime ?
I appreciate any help.
Thanks
Rey Caunca
View 1 Replies
View Related
Jul 20, 2005
I get an error every so often with a DTS package on SQL 7. Error asfollows.The connection is currently being used by a task. The connectioncannot beclosed or re-used.This doesn't happen all the time and I can sometimes (more often thannot) get the DTS package to complete in it's entirety.To explain what the DTS package does...Truncate tables in reporting environment(several in a batch)Clear Transaction LogsCopies data from live environment into CSV (for speed)Copies data from CSV files into tables previously truncated.Builds up a table based on the data copied (for reporting)Clear Transaction logsI'm using a pretty basic set up, Connection (1st DB) -> Transformationto CSV -> Transformation to Connection (2nd DB). It seems to fail oneither the first or second transformation at random (?).I've checked the transformations so that they close the connectionafterwards so it should in theory be releasing the CSV files for thenext step. I suspect that there is a timing issue with this. I cancopy the CSV files over, but this is a little sloppy and I wouldprefer not to do it.Any ideas how to find a tidy way to ensure these are closed bothbefore and afterwards ?ThanksRyan
View 2 Replies
View Related
Oct 25, 2006
Hi guys, say i wrote a query that returns 1,000 records.. what kinda query could i write that only returns say the first 50 records of the 1,000 recs..
View 4 Replies
View Related
May 13, 2007
Hello,
I want to select all the customerIDs where an email address exists. Easy: select customerid from customers where emailaddress = @emailaddress
Now I want to use the resulted customerIDs from the above query as a parameter to select all the email addresses with emailstatus equal to 3.
How do I create this type of while statement in a stored procedure? I prefer to not create a temporary table.
My idea was to do it like this:
select emailaddress from emailaddresseswhere emailstatus = 3 and customerid = (select customerid from customers where emailaddress = @emailaddress)
This doesn't seems to work. I get the error:
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
thanks
View 4 Replies
View Related
Jul 17, 2007
I have a pretty big SQL query with a one to many sort of relationship...
There are client accounts that we're reporting on. Each account has four different historical categories attached. Each historical category can have maybe fifty entries in each, sorted by date.
I need to figure out how to grab the unique accounts and show only the three most recent results per each historical subcategory with the account... the three most current results from each of the four subcategories, displayed by the parent client account number.
I've created four views to isolate the subcategories as a start, thinking I could bring them into a parent query ...
but my question would be... how do I generate JUST the top three historical transactions by account number? If I select TOP 3, I get only the 3 newest in the MASTER LIST, not per client account, which is what I need to do.
Does this make sense? I could really use a good SQL helping hand with this one.
Thank you!
View 12 Replies
View Related
Oct 17, 2007
Can anyone give me the basics of speeding up reports that use queries or views or nested views?
Current reports are now taking over 2 minutes to show.We have thousands and sometimes even millions of records to report against.Queries have 4 and 5 table joins etc.
We are using ASP.NET 2.0 in Visual Studio 2005 and Crystal Reports.
Thanks
View 4 Replies
View Related
Sep 1, 2004
Hi,
I would like to use the result table of the first query in a number of other queries. How do I do this ?
Thanks.
View 2 Replies
View Related
Jan 4, 2006
I have a database with some over normalized tables in it. The best I can do with one query is get the file ID. In the second query I want to get all the file names, based on all the fileID's I got from the first query. How would I go about doing this?
View 5 Replies
View Related
Jan 25, 2006
I have been searching this topic on and for quite some time and can't seem to find a decent answer. Is it feasible to do your paging strictly from a SQL query? Pass the query the pagesize, what page to return and what to sort by?
View 4 Replies
View Related
