Incorrect Syntax Near 'ge'. [SQLSTATE 42000]
Jun 16, 2006
Msg 102, Sev 15, State 1, Line 134 : Incorrect syntax near 'ge'. [SQLSTATE 42000]
hi
I have a script which worked fine in SQL SERVER 2000. We have now upgraded to SQL SERVER 2005 (SP1). When I run the script from Query Analyser it works fine. But when I schedule the same script to run as a job, it fails and i get the following error:
Msg 102, Sev 15, State 1, Line 134 : Incorrect syntax near 'ge'. [SQLSTATE 42000]
Now, there is no problem with the syntax.
What could be the problem?? I have been searching for a logical answer on the Internet and although other people seem to have encontered a similar problem, I have yet to find an answer.
Million thanks if u can help.
Thanks
John
View 12 Replies
ADVERTISEMENT
Jun 19, 2001
I am having a problem with a Job Step that is failing. The actual Step runs
a Stored Procedure, but the Job keeps failing and returning the following
error
"sqlmaint.exe failed. [SQLSTATE 42000](Error 22029). The step failed."
Does anyone know what this means ?
Thanks.
View 1 Replies
View Related
Sep 14, 2004
during maintenance plan i get following error :
Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 5070: [Microsoft][ODBC SQL Server Driver][SQL Server]Database state cannot be changed while other users are using the database 'AJAX'
[Microsoft][ODBC SQL Server Driver][SQL Server]ALTER DATABASE statement failed.
[Microsoft][ODBC SQL Server Driver][SQL Server]sp_dboption command failed.
[8] Database AJAX: Check Data and Index Linkage...
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 7919: [Microsoft][ODBC SQL Server Driver][SQL Server]Repair statement not processed. Database needs to be in single user mode.
View 2 Replies
View Related
Jan 27, 2007
Hi,I have a Scheduled Job on my PC that runs against a Linked Server. Ihave scheduled the Job to run when SQL Server Agent starts and I haveconfigured my SQL Server and SQL Server Agent to start when the OSstarts. The connection to the Linked Server is via my Broadbandinternet connection.I have some suspicions as to the cause and hence a possible solutionbut I want to run my ideas past anyone else who may have experiencedthe same.1. Should I have my DSL modem turned on before I start the PC so thatthe Network connection is available when the OS starts?2. Are the Network connections only made available after you havelogged in and hence not established quickly enough before SQL Serverand SQL Server Agent are started?Yesterday, when I rebooted the PC with the modem still on theScheduled Job ran without failure but this morning again it failed. Myusual routine is to turn on the modem just before I login.If No. 2 is the case then maybe I just need to set the "Retryattempts" parameter.Thanks,Michael HolbertonHospedaje Los Jardines & Sacred Valley Mountain Bike ToursCusco Database Development and Cycling Serviceshttp://www.machawasi.com/http://machawasi.blogspot.com/http://databaseservices.blogspot.comhttp://serviciosdeciclismodelperu.googlepages.com
View 5 Replies
View Related
Jan 8, 2008
Problem Restoring Backup database in MSSQL 2000.I made a backup of one of my databases from one server and now I'm trying to restore to the production server (Clustering) using Enterprise Manager. I remote the server - launched Enterprise Manager and I select the restore from disk and I give the full path of a local drive in the server where the backup is located - when I clicked "ok" it first tells me: "Unable to verify the existence of the backup file location. Do you want to use the backup file location anyway?" If I answer "Yes" and "OK" it presents a error msg: "Cannpt open backup device 'c:.......bak. Restore database terminating - Microsoft SQL-DMO(ODBC SQLSTATE 42000). I have moved this backup around and I still get the same msg. Can anybody help - need assistance ASAP - thank you
View 4 Replies
View Related
Aug 7, 2007
Hello,
I'm having trouble running jobs with my active directory (ADS) account. I've setup my SQL services to run under an ADS account, but jobs cannot seem to query ADS for user information. We're running Windows Server 2003 and SQL Server 2005 SP2.
Here is the error message:
==
The job failed. Unable to determine if the owner (ADSme) of job eFASRtest has server access (reason: Could not obtain information about Windows NT group/user 'ADSme', error code 0x5. [SQLSTATE 42000] (Error 15404)).
==
also this message in log:
==
[298] SQLServer Error: 15404, Could not obtain information about Windows NT group/user 'ADSme, error code 0x5. [SQLSTATE 42000] (ConnIsLoginSysAdmin)
==
I already tested the suggested:
execute as login='adsme' and I get the same error on both (my local installations and production)
appreciate your help
View 23 Replies
View Related
Jun 11, 2007
Hi all,
I am getting error message 'An internal consistency error occured sqlstate:42000" when i am trying to restore the database.
Regards,
Shashi.
View 3 Replies
View Related
Apr 9, 2001
We have a maintenance plan that runs every 15 minutes to backup a transaction log. It fails intermittantly with the message:
"sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
This is the only error message to be found in any of the logs. I've checked event viewer, the SQL error logs, exception log, maintenance plan log, sysdbmainplan_history table in msdb, but can't find any extra information. I checked the MSDN for info on this error and this did not add any extra light on the problem.
Does anyone have any ideas on how to de-bug this error?
regards
Stuart Ainsley
View 4 Replies
View Related
Nov 15, 2007
Hi,
This is my first posting and actually I have big problem which I need to resolve immediately:
I have a 38 GB Database on my SQL Server which I want to full-backup. Until now backup was created on the same volume where the database resides. But now the volume is out of disk space. So what we did is that we connected an external USB disk drive with 500 GB to the SQL Server and try to backup there.
But our first and all consecutive backup attemps failed with error SQL-DMO (ODBC SQLState: 42000). It's working fine the first few minutes as we can see that the backup file is continously growing. But then it abruptly aborts with above error message.
Can anyone figure out why ? Any help is appreciated.
Thx
Overlord1970
View 5 Replies
View Related
Jan 18, 2008
Good morning all. I need some help with a stored proc that is driving me up a wall. It's probably something stairing me right in the face but I can't see it!
I keep getting the following error on the procedure that I'm working on:
SQL-DMO (ODBC SQLSTATE: 42000)
ERROR 156: Incorrect syntax near keyword 'AS'
Must declare the variable '@signid'
Must declare the variable '@signid'
Here's the code:
CREATE PROCEDURE [dbo].[ws_savesignature2db]
@xml as text='',
@image as image='',
@imageformat as varchar(20)='',
@imagename as varchar(40)='',
@imagesize as int=0,
AS
insert into signaturetable
([image], imageformat, imagename, imagesize)
values
(@image, @imageformat,@imagename,@imagesize)
/*
if your XML field datatype is Text or nTEXT, use the code below in Sql Server 2000.
If you use Sql Server 2005, you can use varchar(max) or nvarchar(max) which will be
much easier and you do not need the code.
*/
select @signid = @@IDENTITY
DECLARE @ptrval binary(16)
SELECT @ptrval = TEXTPTR([xml])
FROM ws_signature
WHERE signid= @signid
if @ptrval is not null
WRITETEXT ws_signature.xml @ptrval @xml
GO
Any help you can give would be a life saver!!!!
Thanks in advance.
Jim
View 3 Replies
View Related
May 26, 2008
Hi,
I run 2 steps viz with NORECOVERY and with RECOVERY in sequence as SQP jobs. The 2nd step fails some times. When it starts failing, I run full backup of the production server again and the 2nd step starts succeding. Unless I run the full backup the 2nd step keeps on failing.
What are the conditions which generate for [SQLSTATE 42000] (Error 3013) and how to tackle this problem.?
The 2 steps are :-
1.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
Replace ,
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
GO
2.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
Recovery
The status of the 2 steps is :
1 Executed as user: BPOTESTREMEDY
emedybackup. Processed 104480 pages for database 'ARSYSTEM', file 'ARSystem' on file 1. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'ARSYSTEM', file 'ARSystem_log' on file 1. [SQLSTATE 01000] (Message 4035) RESTORE DATABASE successfully processed 104481 pages in 49.452 seconds (17.307 MB/sec). [SQLSTATE 01000] (Message 3014)
2. Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
View 3 Replies
View Related
Jan 3, 2001
I get the following error when I try to run my scheduled job.
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Any ideas Thanks in advance
Reddy
View 1 Replies
View Related
May 5, 2008
Hi Guys:
Our company wanted to try out SQL Server 2005 Enterprise Edition (64 Bit). So, we were on free trial of the Enterprise Edition for past 5 months. After which we decided to go for SQL SERVER 2005 Standard Edition (64 Bit). And, Last week, we installed the SQL Server Standard Edition (64 Bit) on our server. After installation, everything was restored as before.
The version we are on right now is:
Microsoft SQL Server 2005 - 9.00.3054.00 (X64) Mar 23 2007 18:41:50 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
Strangely, a job which ran fine till then is failing with the following error: And, to be more specific, when this job is run manually in the form of a stored procedure using the query optimizer it runs fine. But, when its executed as a scheduled job on SQL Agent, it fails. The History logs record the following error.
Error :
The OLE DB provider "SQLNCLI" for linked server "LV-SQL2" reported an error. Authentication failed. [SQLSTATE 42000] (Error 7399) Cannot initialize the data source object of OLE DB provider "SQLNCLI" for linked server "LV-SQL2". [SQLSTATE 42000] (Error 7303) OLE DB provider "SQLNCLI" for linked server "LV-SQL2" returned message "Invalid authorization specification". [SQLSTATE 01000] (Error 7412).
I tried everything possible, even recreated the job, but, no avail.
I also considered the possibility if SQL Agent login account did not have enough permissions. So, I changed the SQL Agent login to windows authentication, but the job still fails. So, its the problem has nothing to do with login accounts either.
For the record, I have cross checked all these too.
1. Enabled the remote connections in Surface Area Config
2. Added local server login to remote server login mappings.
3. Checked 'Rpc' and 'Rpc Out' under server options. Also, the Connection Timeout and Query Timeout have been set to zero (0).
Any suggestions pointing towards problem solution appreciated.
Thank you.
View 4 Replies
View Related
Sep 13, 2001
I have log shipping set up between 2 SQL 2000 SP1 Servers on Win 2000. The db is small 10 meg, and when the restore job on the backup server fails I am getting "sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed." as the message, the maint paln on the primary server show no error. Anyone seen this before? The restore has worked 3 out of 5 times
View 2 Replies
View Related
Feb 29, 2008
Hi all help needed from your End.
I have a re-indexing stored procedure,yester day night it got failed
"Executed as user: CONNECTSRVmyadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
what may be the reason..
View 4 Replies
View Related
May 3, 2008
hello,
we have changed the name of MS SQL server 2005 from XYZ to ABC using
sp_dropserver <old_name>
GO
sp_addserver <new_name>, local
GO
Now our maitenance plan is getting failed we are not able to execute backup jobs we are getting following error
Date 03.05.2008 16:00:00
Log Job History (ADM_AdminDB_TP_Backup.Subplan_1)
Step ID 0
Server ABC
Job Name ADM_AdminDB_TP_Backup.Subplan_1
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. Unable to determine if the owner (XYZSQLServer) of job ADM_AdminDB_TP_Backup.Subplan_1 has server access (reason: Could not obtain information about Windows NT group/user 'XYZSQLServer', error code 0x534. [SQLSTATE 42000] (Error 15404)).
please help us in this issue
View 13 Replies
View Related
Nov 5, 2007
I'm not sure if this is the correct group for this messages, but here it is anyway.
I have a job that has 3 steps to, periodicly the job errors out on Step 1. Following is the message (from Job History).
--------------------
Executed as user: SMIsqladmin. The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [SQLSTATE 42000] (Error 7391) [SQLSTATE 01000] (Error 7312) OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. [SQLSTATE 01000] (Error 7300). The step failed.
--------------------
Can someone please explain this message, I have no idea how to fix it or what the cause is.
Thanks
David Davis
View 1 Replies
View Related
May 27, 2008
This is the error it gives me for my code and then it calls out line 102. Line 102 is my buildDD(sql, ddlPernames) When I comment out this line the error goes away, but what I don't get is this is the same way I build all of my dropdown boxes and they all work but this one. Could it not like something in my sql select statement. thanksPrivate Sub DDLUIC_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles DDLUIC.SelectedIndexChanged
Dim taskforceID As Byte = ddlTaskForce.SelectedValueDim uic As String = DDLUIC.SelectedValue
sql = "select sidstrNAME_IND from CMS.dbo.tblSIDPERS where sidstrSSN_SM in (Select Case u.strSSN from tblAssignedPersonnel as u " _
& "where u.bitPresent = 1 and u.intUICID in (select intUICID from tblUIC where intTaskForceID = " & taskforceID & " and strUIC = '" & uic & "'))"ddlPerNames.Items.Add(New ListItem("", "0"))
buildDD(sql, ddlPerNames)
End Sub
View 2 Replies
View Related
May 20, 2008
Why does the following call to a stored procedure get me this error:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'CONVERT'.
Code Snippet
EXECUTE OpenInvoiceItemSP_RAM CONVERT(DATETIME,'01-01-2008'), CONVERT(DATETIME,'04/30/2008') , 1,'81350'
The stored procedure accepts two datetime parameters, followed by an INT and a varchar(10) in that order.
I can't find anything wrong in the syntax for CONVERT or any nearby items.
Help me please. Thank you.
View 7 Replies
View Related
Dec 14, 2003
I keep receiving the following error whenever I try and call this function to update my database.
The code was working before, all I added was an extra field to update.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'WHERE'
Public Sub MasterList_Update(sender As Object, e As DataListCommandEventArgs)
Dim strProjectName, txtProjectDescription, intProjectID, strProjectState as String
Dim intEstDuration, dtmCreationDate, strCreatedBy, strProjectLead, dtmEstCompletionDate as String
strProjectName = CType(e.Item.FindControl("txtProjectName"), TextBox).Text
txtProjectDescription = CType(e.Item.FindControl("txtProjDesc"), TextBox).Text
strProjectState = CType(e.Item.FindControl("txtStatus"), TextBox).Text
intEstDuration = CType(e.Item.FindControl("txtDuration"), TextBox).Text
dtmCreationDate = CType(e.Item.FindControl("txtCreation"),TextBox).Text
strCreatedBy = CType(e.Item.FindControl("txtCreatedBy"),TextBox).Text
strProjectLead = CType(e.Item.FindControl("txtLead"),TextBox).Text
dtmEstCompletionDate = CType(e.Item.FindControl("txtComDate"),TextBox).Text
intProjectID = CType(e.Item.FindControl("lblProjectID"), Label).Text
Dim strSQL As String
strSQL = "Update tblProject " _
& "Set strProjectName = @strProjectName, " _
& "txtProjectDescription = @txtProjectDescription, " _
& "strProjectState = @strProjectState, " _
& "intEstDuration = @intEstDuration, " _
& "dtmCreationDate = @dtmCreationDate, " _
& "strCreatedBy = @strCreatedBy, " _
& "strProjectLead = @strProjectLead, " _
& "dtmEstCompletionDate = @dtmEstCompletionDate, " _
& "WHERE intProjectID = @intProjectID"
Dim myConnection As New SqlConnection(System.Configuration.ConfigurationSettings.AppSettings("connectionstring"))
Dim cmdSQL As New SqlCommand(strSQL, myConnection)
cmdSQL.Parameters.Add(new SqlParameter("@strProjectName", SqlDbType.NVarChar, 40))
cmdSQL.Parameters("@strProjectName").Value = strProjectName
cmdSQL.Parameters.Add(new SqlParameter("@txtProjectDescription", SqlDbType.NVarChar, 30))
cmdSQL.Parameters("@txtProjectDescription").Value = txtProjectDescription
cmdSQL.Parameters.Add(new SqlParameter("@strProjectState", SqlDbType.NVarChar, 30))
cmdSQL.Parameters("@strProjectState").Value = strProjectState
cmdSQL.Parameters.Add(new SqlParameter("@intEstDuration", SqlDbType.NVarChar, 60))
cmdSQL.Parameters("@intEstDuration").Value = intEstDuration
cmdSQL.Parameters.Add(new SqlParameter("@dtmCreationDate", SqlDbType.NVarChar, 15))
cmdSQL.Parameters("@dtmCreationDate").Value = dtmCreationDate
cmdSQL.Parameters.Add(new SqlParameter("@strCreatedBy", SqlDbType.NVarChar, 10))
cmdSQL.Parameters("@strCreatedBy").Value = strCreatedBy
cmdSQL.Parameters.Add(new SqlParameter("@strProjectLead", SqlDbType.NVarChar, 15))
cmdSQL.Parameters("@strProjectLead").Value = strProjectLead
cmdSQL.Parameters.Add(new SqlParameter("@dtmEstCompletionDate", SqlDbType.NVarChar, 24))
cmdSQL.Parameters("@dtmEstCompletionDate").Value = dtmEstCompletionDate
cmdSQL.Parameters.Add(new SqlParameter("@intProjectID", SqlDbType.NChar, 5))
cmdSQL.Parameters("@intProjectID").Value = intProjectID
myConnection.Open()
cmdSQL.ExecuteNonQuery
myConnection.Close()
MasterList.EditItemIndex = -1
BindMasterList()
End Sub
Thankyou in advance.
View 3 Replies
View Related
May 22, 2008
What I am trying to create a query to check, If recDT is not value or null, then will use value from SELECT top 1 recDtim FROM Serv. Otherwise, will use the value from recDT. I have tried the below query but it doesn't work. The error says, Incorrect syntax near the keyword 'SELECT'.Incorrect syntax near the keyword 'else'.1 SELECT
2 case when recDT='' then SELECT top 1 recDtim FROM Serv else recDT end
3 FROM abc
4
Anyone can help? Thanks a lot.
View 5 Replies
View Related
Jul 26, 2006
I am not sure how to fix this??
Imports System.Data
Imports System.Web.UI.WebControls.FormView
Imports System.Data.SqlClient
Partial Class Assignment
Inherits System.Web.UI.Page
Protected Sub UpdateButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles UpdateButton.Click
Dim empID As Integer
Dim nbrID As Integer
Dim equid As Integer
Dim UpdateQuery
Dim empequipid As SqlCommand
Dim mySQLConnection As String = System.Configuration.ConfigurationManager.ConnectionStrings("DBConnectionString").ToString
Dim myConnection As New SqlConnection(mySQLConnection)
myConnection.Open()
empID = (Session("UserEmployeeID"))
equid = (Session("UserEquipID"))
If CType(empID, Integer) = Nothing Then
empID = (DropDownList1.SelectedValue)
'Response.Write("Insert: " & empID)
'Response.End()
Me.SqlDataSource1.InsertCommand = "INSERT INTO [EMPLOYEES_EQUIP] ([EquipID], [EmployeeID]) VALUES " & equid & " " & empID & ""
Me.SqlDataSource1.InsertCommand = SqlDataSourceCommandType.Text
Me.SqlDataSource1.Insert()
Else
empequipid = New SqlCommand("Select EmpEquipID From EMPLOYEES_EQUIP Where EmployeeID = " & empID & " AND EquipID = " & equid & " ", myConnection)
empequipid.CommandType = CommandType.Text
nbrID = empequipid.ExecuteScalar
'Response.Write("Select EmpEquipID: " & nbrID)
'Response.End()
empID = (DropDownList1.SelectedValue)
'Response.Write("<br>Update EmployeeID: " & empID)
'Response.End()
Me.SqlDataSource1.UpdateCommand = "UPDATE EMPLOYEES_EQUIP SET EmployeeID = " & empID & " WHERE EmpEquipID = " & nbrID & " "
Me.SqlDataSource1.UpdateCommand = SqlDataSourceCommandType.Text
Me.SqlDataSource1.Update() <---Right here is displaying "Incorrect syntax near '0'."
'Added to output the Update Query
UpdateQuery = "UPDATE EMPLOYEES_EQUIP SET EmployeeID = " & empID & " WHERE EmpEquipID = " & nbrID & " "
'Response.Write(UpdateQuery)
'Response.End()
End If
'Updating the session to new EmployeeID
Session("UserEployeeID") = (DropDownList1.SelectedValue)
'Response.Write("<br>UserEmployeeID Session: " & Session("UserEmployeeID"))
'Response.End()
'-- Turn On Employee Information Table
EmpInfo.Visible = True
'-- Hides the Employee Name's Drop Down List table.
maintable.Visible = False
End Sub
End Class
View 2 Replies
View Related
Aug 11, 2006
Why am I getting this error.
[SqlException (0x80131904): Incorrect syntax near '.123'.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +857418 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735030 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838 System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +149 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +886 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +132 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +415 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135 WebApplication10.Edit.dgrdEdit_UpdateCommand(Object source, DataGridCommandEventArgs e) in C:Inventoryedit.aspx.vb:186 System.Web.UI.WebControls.DataGrid.OnUpdateCommand(DataGridCommandEventArgs e) +105 System.Web.UI.WebControls.DataGrid.OnBubbleEvent(Object source, EventArgs e) +471 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.DataGridItem.OnBubbleEvent(Object source, EventArgs e) +117 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.LinkButton.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +174 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
View 1 Replies
View Related
Sep 8, 2006
Hi,I am trying to test a login form and I get this error message and can't find out why. Istarted out with the Login control, but since I have to try it on the ISP's server, I can't use the SQL Server Managment Studio's integrated authentication. So, I converted the login control to a template and assigned a handler for the login button:protected void LoginButton_Click(object sender, EventArgs e){String usrname = lpLogin.UserName.ToString(); //lpLogin is the <ASP:Login ...>String conString = "Data Source=mylocalserver\SQLEXPRESS;Initial Catalog=LPRU;Integrated Security=True";String selQuery = "SELECT [Password], [FirstName], [LastName] FROM [lpUserInfo] WHERE ([UserID] ='" + usrname + "';";SqlConnection con = new SqlConnection(conString);SqlCommand cmd = new SqlCommand(selQuery, con);con.Open();SqlDataReader rdr = cmd.ExecuteReader(CommandBehavior.CloseConnection); // <--- it says "syntax error near ';' " on this line, I tried it without CommandBehaviorwhile (rdr.Read()){Label1.Text= rdr.GetString(0) + rdr.GetString(1); // for testing purposes, trying to print out first name and last name}rdr.Close();con.Close();}Is there a way of using SQLServer 2000, used by my ISP, and take advantage of .net 2.0's login control, roles, membership, ...? By just using a connection string?
View 6 Replies
View Related
Feb 19, 2007
OS: Windows2kPlatform: ASP.Net 2.0.50727DB Server: SQL Server 2000 I'm getting an error that I don't understand, could someone help me please? In the interest of brevity I threw most of the query out (it's a somewhat long join). --- query += "AND TOURNAMENT_ROUNDS.END_TIME BETWEEN ? AND ?"; System.Data.SqlClient.SqlCommand cmd = new SqlCommand(query, connection); cmd.Parameters.Add("@from",System.Data.SqlDbType.DateTime).Value = from; cmd.Parameters.Add("@to", System.Data.SqlDbType.DateTime).Value = to; SqlDataAdapter da = new SqlDataAdapter(query, connection); da.SelectCommand = cmd; DataSet ds = new DataSet(); int i = 0; try { connection.Open(); da.Fill(ds); --- The da.Fill(ds) is what's throwing. I was under the impression that ADO.Net would handle the syntax so that this shouldn't be a problem. Any idea about what direction I should be looking? If you need me to post more I'll be happy to do that. I've verified that the above is where the exception is throwing by taking out the particular AND clause, and the query worked as expected. Thanks for the help,Michael
View 2 Replies
View Related
Mar 17, 2007
Hi Guys,I have moved my asp.net app from access db over to MS SQL 2005 DB.And I have got a slight problem when I go to view any productfor example if I type in the url of http://domain.com/catalog/Details.aspx?AdNum=1I get this errorServer Error in '/catalog' Application.--------------------------------------------------------------------------------Incorrect syntax near '?'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near '?'.I have attached the details.aspx.I await for some suggestions.ThanksMatthew
------------------1 <%@ Page MasterPageFile="Classy.master" Explicit="True" Language="VB" Debug="True" %>
2
3 <asp:Content runat="server" ID="HeaderContent" ContentPlaceHolderID="PageHeader">
4 Ad Detail - <asp:BoundField DataField="Title" HeaderText="Title" SortExpression="Title" />
5 </asp:Content>
6
7 <asp:Content runat="server" ID="BodyContent" ContentPlaceHolderID="Body" >
8
9 <script runat="server">
10 Sub Page_Load(ByVal Sender As Object, ByVal E As EventArgs)
11 If Not IsPostBack Then
12 If Request.QueryString("AdNum") = "" Then
13 Response.Redirect("default.aspx")
14 End If
15 EditLink.NavigateUrl = "confirm.aspx?AdNum=" & Request.QueryString("AdNum")
16 End If
17 End Sub
18
19 Protected Sub DetailsView1_PageIndexChanging(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.DetailsViewPageEventArgs)
20
21 End Sub
22 </script>
23
24
25 <asp:DetailsView ID="DetailsView1" runat="server" AutoGenerateRows="False"
26 CellPadding="4" DataKeyNames="AdNum" DataSourceID="SqlDataSource1" ForeColor="#333333"
27 GridLines="None" Height="65px" Width="100%" Font-Names="Arial" Font-Size="8pt" OnPageIndexChanging="DetailsView1_PageIndexChanging">
28 <RowStyle BackColor="#FFFBD6" ForeColor="#333333" />
29 <FieldHeaderStyle BackColor="#FFFF99" Font-Bold="True" />
30 <Fields>
31 <asp:BoundField DataField="Title" HeaderText="Title" SortExpression="Title" />
32 <asp:BoundField DataField="Category" HeaderText="Category" SortExpression="Category" />
33 <asp:BoundField DataField="Description" HeaderText="Description" SortExpression="Description" />
34 <asp:BoundField DataField="Price" HeaderText="Price" SortExpression="Price" />
35 <asp:BoundField DataField="Phone" HeaderText="Phone" SortExpression="Phone" />
36 <asp:TemplateField HeaderText="Email">
37 <ItemTemplate>
38 <asp:HyperLink ID="HyperLink1" runat="server" Text=Email NavigateUrl='<%# Eval("Email", "mailto:{0}") %>' />
39 </ItemTemplate>
40 </asp:TemplateField>
41 <asp:BoundField DataField="State" HeaderText="State" SortExpression="State" />
42 </Fields>
43 </asp:DetailsView>
44 <p><i>To respond to this ad, just click the email address
45 above to send the poster
46 a message.</i></p>
47 If you created this ad, you can
48 <asp:hyperlink id="EditLink" runat="server" >edit or delete it.</asp:hyperlink> <br>
49 <asp:SqlDataSource ID="SqlDataSource1" runat="server"
50 ConnectionString="<%$ ConnectionStrings:classydbConnectionString %>"
51 ProviderName="<%$ ConnectionStrings:classydbConnectionString.ProviderName %>"
52 SelectCommand="SELECT * FROM [Ads] WHERE ([AdNum] = ?)">
53 <SelectParameters>
54 <asp:QueryStringParameter Name="AdNum" QueryStringField="AdNum" Type="Int32" />
55 </SelectParameters>
56 </asp:SqlDataSource>
57
58 </asp:content>
View 4 Replies
View Related
Jun 18, 2007
Can anyone see why I would get the 'Incorrect Syntax near AS' error in this?
USE [SQL2]GO/****** Object: StoredProcedure [dbo].[PlanGroupGrid] Script Date: 06/18/2007 06:07:34 ******/SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[PlanGroupGrid]@dp_id intASSELECT tblExpenses.gp_ID, tblExpenses.Amount INTO #tempApExpFROM tblExpensesSELECT tblGroups.dp_id, tblGroups.Group_ID, tblGroups.Group_Type, tblGroups.Group_Purpose, tblGroups.Group_StartDate, tblGroups.Group_EndDate, COALESCE (tblGroups.Group_Goal, 0) AS Goal, SUM(COALESCE(#tempApExp.Amount,0)) AS [Total Expenses], SUM(COALESCE (tblReceipts.AmountPaid, 0)) AS [Total Paid], SUM(COALESCE (tblReceipts.AmountPaid, 0)) - COALESCE (tblGroups.Group_Goal, 0) - SUM(COALESCE(#tempApExp.Amount,0)) AS [Total Expenses], AS VarianceFROM tblGroups LEFT OUTER JOIN tblTracking ON tblGroups.Group_ID = tblTracking.Group_ID LEFT OUTER JOIN tblReceipts ON tblTracking.gp_ID = tblReceipts.gp_ID LEFT OUTER JOIN #tempApExp ON tblTracking.gp_ID = #tempApExp.gp_IDWHERE (tblGroups.dp_id = @dp_id)GROUP BY tblGroups.dp_id, tblGroups.Group_ID, tblGroups.Group_Type, tblGroups.Group_Purpose, tblGroups.Group_StartDate, tblGroups.Group_EndDate, tblGroups.Group_GoalIf Exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[tempApExp]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)Drop table #tempApExp
View 2 Replies
View Related
Jul 28, 2007
I'm getting a pop up error "Incorrect syntax near the keyword 'ORDER'.
Can someone please tell me what is wrong with my code? It worked before I added the underlined part.
If FoundChecked = True Then
Dim SQLString As String
SQLString = "SELECT ID, Bedrooms, Bathrooms, Location, Rent FROM ListingsTable WHERE "
For Each Item In LocationList.Items
If Item.Selected Then
SQLString &= " Location = '" & Item.Value & "' OR " & "" & " ORDER BY Location" ----------------------This is the problem
End If
View 8 Replies
View Related
Aug 28, 2007
Hi
I'm trying to lookup a sigle value from an MS SQL Express database. However, I get an error - Incorrect Syntax near '' - when executing the code. The line in bold below is what is highlighted on the error I get back. Please Help!!
The code is below
Thanks
Dim oSQLConn As Data.SqlClient.SqlConnection = New Data.SqlClient.SqlConnection()oSQLConn.ConnectionString = "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|SDCentral.mdf;Integrated Security=True;User Instance=True"oSQLConn.Open() Dim ValExtract As Data.SqlClient.SqlCommand = New Data.SqlClient.SqlCommand("SELECT * FROM ProjectsQRY", oSQLConn) Dim Get1 As Int32 = CInt(ValExtract.ExecuteScalar()) Me.Active1.Text = Get1
oSQLConn.Close()
View 4 Replies
View Related
Aug 28, 2007
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near ')'.Source Error:
Line 42: objAdapter.SelectCommand = New System.Data.SqlClient.SqlCommand(strSQL, objConn)Line 43: ' Fill the dataset.Line 44: objAdapter.Fill(objDataset)Line 45: ' Create a new view.Line 46: Dim oView As New DataView(objDataset.Tables(0))
Sub Page_Load(ByVal sender As Object, ByVal e As EventArgs)
Dim AllorOne As String
Dim company As String
AllorOne = Request.QueryString("AllorOne")
company = Request.QueryString("company")
' Create a connection and open it.
Dim objConn As New System.Data.SqlClient.SqlConnection("User ID=******;Password=******;Initial Catalog=customer_config;Data Source=rqa4-sql01;")
objConn.Open()
Dim strSQL As String
Dim objDataset As New DataSet()
Dim objAdapter As New System.Data.SqlClient.SqlDataAdapter()
' Get all the sql
If AllorOne = "All" Then
strSQL = "SELECT [Company_Name] as 'Company Name', [Entity_Code] as 'Entity Code', [YTD_Transactions] as 'YTD_Transactions', [Num_Reports_DB] as 'Num_Reports_DB', [Reports_Advanced_Workflow] as 'Reports_Advanced_Workflow', [Has_Customization] as 'Has_Customization',[TA_Trans_All] as 'TA Trans All', [TA_Trans_US] as 'TA Trans US', [Using_VAT] as 'Using VAT', [Total_Users] as 'Total Users',[Non_English_Langages] as 'Non English Langages',[Non_English_Users] as 'Non English Users', [Using_Offline] as 'Using Offline', [Using_Audit_Services] as 'Using Audit Services' from(v_customer_master_list) order by company_name"
Else
strSQL = "SELECT [Company_Name] as 'Company Name', [Entity_Code] as 'Entity Code', [YTD_Transactions] as 'YTD_Transactions', [Num_Reports_DB] as 'Num_Reports_DB', [Reports_Advanced_Workflow] as 'Reports_Advanced_Workflow', [Has_Customization] as 'Has_Customization',[TA_Trans_All] as 'TA Trans All', [TA_Trans_US] as 'TA Trans US', [Using_VAT] as 'Using VAT', [Total_Users] as 'Total Users',[Non_English_Langages] as 'Non English Langages',[Non_English_Users] as 'Non English Users', [Using_Offline] as 'Using Offline', [Using_Audit_Services] as 'Using Audit Services' from(v_customer_master_list) where lower(company_name) like '%" & company & "%' order by company_name"
End If
objAdapter.SelectCommand = New System.Data.SqlClient.SqlCommand(strSQL, objConn)
' Fill the dataset.
objAdapter.Fill(objDataset)
' Create a new view.
Dim oView As New DataView(objDataset.Tables(0))
' Set up the data grid and bind the data.
SimpleDataGrid.DataSource = oView
SimpleDataGrid.DataBind()
End Sub
Can anyone tell me what causes this type of error, what they think is wrong, or what IS wrong if someone wants to take the time to go through the code. Anything helps. Eh, I feel like one of those guys on a street corner with a sign when I say that.
View 3 Replies
View Related
Nov 20, 2007
Hi there
I'm getting an Incorrect syntax near '='. error when I click update in my gridview.
Any ideas?
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:Taskdb %>" SelectCommand="SELECT [taskid], [taskname], [taskdescription], [taskstatus] FROM [tblTask]" UpdateCommand="UPDATE [tbltask) set [taskname] = @taskname, [taskdescription] = @taskdescription, [taskstatus] = @taskstatus where [taskid] = @taskid"> <UpdateParameters> <asp:Parameter Type="String" Name="taskname" /> <asp:Parameter Type="String" Name="taskdescription" /> <asp:Parameter Type="Int16" Name="taskstatus" /> <asp:Parameter Type="Int16" Name="taskid" /> </UpdateParameters> </asp:SqlDataSource> Thanks in advance.
View 2 Replies
View Related
Jan 16, 2008
Could someone please tell me what is wrong with the following? Thanks!
Dim objcmd As New SqlCommand
Dim link As String
Dim pocount As Integer
objConn.Open()objcmd = New SqlCommand("SELECT COUNT(PONumber) FROM (SELECT PONumber FROM BOL_Dtl GROUP BY PONumber, BOLNumber HAVING BOLNumber = @BOLNumber)", objConn)
objcmd.Parameters.Add("@BOLNumber", SqlDbType.Int, 4)objcmd.Parameters("@BOLNumber").Value = Int32.Parse(Request.QueryString("BOLNumber"))
pocount = objcmd.ExecuteScalar()
View 2 Replies
View Related
Feb 28, 2008
Hi,
I have a table 'MemberPayment', into which I would like to pass a derived value, and a value from another table (table 'Vehicle', value 'Registration'). However, I keep getting errors with my syntax... would anybody be able to kindly tell me where I am going wrong? My code is;Declare @Total int
Declare @Registration str
SELECT (@Registration=(Vehicle.Registration), @Total=((MileageHistory.MileageUrban * Vehicle.EmissionsPerGramUrban) * 0.05) + ((MileageHistory.MileageCountry * Vehicle.EmissionsPerGramUrban) * 0.05) )
FROM [NeuCar].[dbo].[MileageHistory] JOIN [NeuCar].[dbo].[Vehicle]
ON MileageHistory.Registration = Vehicle.Registration
JOIN [NeuCar].[dbo].[Member] ON Vehicle.UserName = Member.UserName
WHERE Member.UserName = 'wenger1' AND (MileageHistory.[Date] >= CURRENT_TIMESTAMP - 30)
INSERT INTO MemberPayment (Registration, TotalCharge) VALUES ( @Registration, @Total )
Many thanks for your time,
Best regards,
Chima
View 2 Replies
View Related
