Hi,
Is there a way to auto-increment by date in a data-driven subrscription? I only see a few options and increment by date is not one of them? If not, does anyone have a workaround to publish reports that are increment by date?
Thanks,
J
I have a Primary Key column that I would like to have formatted as follows: 'yyyymmdd[auto increment]' . I would also like the auto increment to restart at the beginning of a new month. Any idea's on how to achieve this?
Thanks
I have a table with 4 fields,
Startdate, rec_num , recursive_value, recursive_date
04/02/2014 3 d 04/02/2014
04/02/2014 3 d 04/02/2014
04/02/2014 3 d 04/02/2014
I will like to update recursive_date to emulate the recursive_number and recursive_value fields which specify every 3 days. The recursive_value field can also be w to specify weeks, m to specify month or y to specify years.
So my value in the recursive_date field should be updated as followed
Startdate, rec_number , recursive_value, recursive_date
04/02/2014 3 d 04/02/2014
04/02/2014 3 d 04/05/2014
04/02/2014 3 d 04/08/2014
My requirement demands me to use a extract based on a date. And on success i need to increment this date by a day.
So i have a declared two variables, vDate and vSourceSQL. I am using the sql statement from variable in the data access method. My package is successful.
Reading through the forum and after following this blog
http://blogs.conchango.com/jamiethomson/archive/2005/02/09/SSIS_3A00_-Writing-to-a-variable-from-a-script-task.aspx
i now have a script task which will increment my "vDate" variable and i am calling it as a post execute task. I have posted the error below. Tried to get atleast the sample provided to succeed, but.... this is what i get.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Flat File Destination" (800)" wrote 12 rows.
Error: 0xC001405C at Script Task Data Flow Task: A deadlock was detected while trying to lock variables "User::vMyVar" for read/write access. A lock cannot be acquired after 16 attempts. The locks timed out.
Error: 0xC001405D at Script Task Data Flow Task: A deadlock was detected while trying to lock variables "System::InteractiveMode" for read access and variables "User::vMyVar" for read/write access. A lock cannot be acquired after 16 attempts. The locks timed out.
Error: 0x2 at Script Task Data Flow Task: The script threw an exception: A deadlock was detected while trying to lock variables "User::vMyVar" for read/write access. A lock cannot be acquired after 16 attempts. The locks timed out.
Task failed: Script Task Data Flow Task
Warning: 0x80019002 at OnPostExecute: The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at SqlCommandFromVariable: The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "SqlCommandFromVariable.dtsx" finished: Failure.
The program '[2316] SqlCommandFromVariable.dtsx: DTS' has exited with code 0 (0x0).
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have a (1) date field and (2) an auto-incrementing ID field that always throw me errors when I'm doing a programmatic insert.
(1) After doing many searches on the subject, I don't think I'm using the correct syntax for the date and can't find any suggestion that works. Would appreciate your knowledge on correct SQL syntax for inserting a "today's date" field.
(2) I'm using the following code to create a new auto-incrementing ID for each record but it seems that there should be a smoother method to force the field's value to auto-increment. Any ideas?
Private objCmd As SqlCommand Private strConn As New SqlConnection(ConfigurationManager.AppSettings("conn"))...objCmd = New SqlCommand("select max(ClientID) from tblClients", strConn)Dim intClientID As Int16 = objCmd.ExecuteNonQuery + 1
I have a client data which has the candidate id, a start date which will have only the date in varchar format and a time value associated to that date in varchar format in a seperate column.
To give a brief explanation about the data a candidate will come to study center at any time point in a day for example 10:00 AM on 20-10-2014. The start date will be 20-10-2014 and from 10:00 AM he will have test based on the time point. So if the time point is 2 HR, then at 12:00 PM he will have a test. If the time point is 8 HR, it will get added with 10:00 AM and based on this he will have the test at 06:00 PM. When the timepoint reaches 00:00 the start date needs to be the next date instead of 20-10-2014.
The start date needs to be appended with the time value such that when it crosses over the time 00:00, the start date needs to get increased by 1 ie the next day. I have added the start date to the time by using the code below
CAST(STARTDATE as datetime) + CAST(CAST(STUFF([TIME],3,0,':') as time(0)) as datetime) as [EXPECTEDDATETIME]
By this above code i have created the expected datetime however
I will not be able to hardcode the value due to dynamic data. I tried to apply >= and < to the time value something like
case when MyTime >= '00:00' and MyTime < '08:10' the Dateadd(day, 1, date)
This works perfect but my concern is that I cannot put the value 08:10 because it will not a constant value for all rows.
I have provided a screenshot of my data and a expected date column for reference.
Candidate StartDateStartTimeExpected DateTime Timepoint
1 20141020 1000 2014-10-20 10:00:00 0 HR
1 201410201200 2014-10-20 12:00:00 02 HR
1 201410201400 2014-10-20 14:00:00 04 HR
1 201410201800 2014-10-20 18:00:00 08 HR
1 201410200000 2014-10-21 00:00:00 12 HR
1 201410201200 2014-10-21 12:00:00 24 HR
2 20141020 1100 2014-10-20 11:00:00 0 HR
[Code] ....
I have also attached the data for reference.
Hello,
I am curious if you can create a subscription for a report that resides on reports manager with a dynamic date? We have a couple of reports on reports manager that require a date value and I tried to use getdate() for the value but it will not except it. Is there a way to have a subscription do something like this so the end user doesn't have to change the date parameter each time? Thanks in advance.
John
My company sends reports on a daily basis to our customers. Now I want to save all the sent reports on disc with the date in the filename. I have set up a subscription which daily saves the files where I want them. However, I haven't found a way to add the date easily. I already have a parameter when creating the report, it is called Date. Does anybody know if I can use a parameter or something else?
Thank's
Hello,
I Have a table that needs to have 2 unique number.
detail_id and detail_print_id.
detail_id is already an IDENTITY.
both fields need to be different, because when importing, it imports the same data into a table twice, with only a slight data change (and id is not one of the changes).
So I thought i could do the following:
detail_id INT NOT NULL IDENTITY(1,2),
detail_print_id INT NOT NULL IDENTITY(2,2),
--blah blah
that way, the detail_id will always be odd, and the detail_print_id will always be even. however SQL Server 2005 only allows 1 identity per table, and both these fields need to be auto generated when the field is inserted, so as to prevent double data.
is there anyway I can create a int column to auto increment, without the column being an IDENTITY??
also, I would prefer to not have to create a second table with a single column just for this work.
Thanks,
Justin
I have an SSRS report with parameters for Created On Start and Created On End. Users run this manually and choose the date range to display records for.
I would like to set up two different subscriptions
1) to send weekly on Monday morning for "last weeks" records and
2) to send monthly to send "last month's" records.
Is it possible to have a custom start date parameter on a report? I would like to have a cumulative daily report for the week, Friday to Thursday. The final daily to run on the Friday, then the next week begins. I have a enddate, which is today()-1 (for previous day); I need a start date to be variable.
In other words,
On a Monday, report pulls data from last Friday to Sunday;
On a Tuseday, report pulls data from last Friday to Monday,
On a Wednesday, report pulls data from Friday to Tuesday, etc,
until on Friday, the report pulls data from last Friday to Thursday.
It seems to me that if a scheduled SSRS report subscription fails ( Status Message - An error has occurred during report processing) , that I actually need to delete the subscription and reconfigure it from scratch. The scheduled job doesn't try to run again automatically (say the next Monday on a weekly Monday schedule).
Is there a way to "reset" a failed subscription without have to recreate the entire subscription?
Thank you
Devon Kyle
28638
SSCE_M_DUPLICATETABLE
Existing subscription already contains table included in the new subscription.
What are the possible causes of this merge replication error?
Could it be caused by a SQL Server Compact Edition User trying to sync their .sdf file after their subscription has already expired on the SQL Server?
Would you expect to see a different message if a SQL Server Compact Edition user tried to sync a subscriber database (.sdf file) with merge replication if it's been longer than the subscription retention period since their last sync?
i have got 22,000 rows in a table, i want to update the records to have to start id of 70000 which increments to 70001, 70002 ? how would i go about doing this ?
View 3 Replies View RelatedIs there an easy and fast way to increment a value by 1 in a database? For example if a value is 106 I will need to make it 107. Is there a fast way to do this?
View 9 Replies View RelatedIf there is one field such as Seq No in a table and if we entered some data ..
and if we update one record of Seq No then the below records of Seq No should be incremented in that table
for example there are 10 seq no's and if i had updated the seq no 4 to 5 then the
5 shuld b inc 6 and 6 to 7 etc............
at preasent i wrote only
update in sp of that particular record:
like this
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[UpdateSelected]
(
@Description NVARCHAR(30),
@SequenceNo int
)
AS
UPDATE Sequence SET
Description = @Description,
SequenceNo = @SequenceNo
WHERE
SectionID = @SectionID
but now i need additional functionaly like inc the remaining sq no above that given no...
Regards,
Anushka
1. I have a table lets say ABC in which the datatype of one of the column lets say MNO is int identity.
3. Inserted some records into this table using SSIS. the values in the column MNO are from 1 till 20
2. i want insert more records into this table ABC using SQL task in SSIS
How do i do this. can any body help me out.
Thanks in advance
1. I have a table lets say ABC in which the datatype of one of the column lets say MNO is int identity.
3. Inserted some records into this table . the values in the column MNO are from 1 till 20
2. i want insert more records into this table ABC
How do i do this. can any body help me out.
Thanks in advance
I have a table with an automatic count int. What I want to know is there an sql statement to return the next increment from the sequence. Any help would be appreciated.
View 4 Replies View RelatedTO allI have tabelautonumber value1125364859610712813981010and if i want sum with increment 2autonumber value1 - 2 1 + 5 = 63 - 4 6 + 8 = 145 - 6 197 - 8 259 - 10 18please help.............. trims
View 5 Replies View RelatedHi,
This is my first SSIS query. I have just started with ssis and have the following task
I am looping text files in a folder using foreach. I transfer text file data to sql server. I want to count the total rows are that transferred in all the text files after the foreach loop finishes. I user RowCount but it gives count of only current textfile. It gets reset each time the loop iterates. I want something like @count = @count + currentnoofrows in current text file.
lalit.
I'm using SQL Server 2000 with MS Management Studio. I have a table that has 400 rows. I have setup the Primary key to increment automatically. How do I setup so that the next record starts at 4001 and up? Right now it starts at 1274, for example. So besides dropping the table and re-creating it, how do reset it so it counts from sequentially from the last row inserted?
View 5 Replies View RelatedHow can you increment row by row through a table using a stored procedure?
I am trying this but getting error on SET statement - Line 6: Incorrect syntax near '.'.
PROCEDURE asuodem.spA_LinkSpinner ASWHILE (tblLinkInfo_OLD2.L_ID IS NOT NULL)BEGINIF (tblLinkInfo_OLD2.L_Rank > 10) AND (tblLinkInfo_OLD2.L_Rank < 300)SET tblLinkInfo_OLD2.L_Rank = Convert(int, (250-25+1)*RAND())ELSE CONTINUEENDRETURN
DIAGID is the
field in database which is integer. i want to increment this when page is
loaded.but it is not working..
plz
find mistake ... thanks in advance
SqlCommand sqlCmd = new SqlCommand("Select max(DIAGID) from tblDxactual",
sqlCon);
SqlDataReader sqlDr;
sqlCon.Open();
sqlDr = sqlCmd.ExecuteReader();
if (sqlDr.Read())
{
txtbxDiagID.Text = sqlDr[0].ToString()+ "1"
;
}
else
txtbxDiagID.Text="1";
sqlCon.Close();
It's been a long time since I've had to check an index for the highest value, then add 1, to create a new unique key. These past few years, it seems this is usually done for you. But now that I'm working with MS-SQL, I don't see it. Is it there? It's doesn't seem to be inherent in the definition.
View 5 Replies View RelatedHello,
Firstly Hello to everyone I'm new the forum and fairly new to .net
I'm working on web datbase application using visual studios 05 and MS SQL05 I've used 2003 (briefly) before but 2005 is very new to me.
To my problem I download the GUI interface from microsoft so I can now setup a local database and do my own testing.
I have created the table and fields with in it however on a particular table i have made a primary Key and left it as an INT but I would like to set it as auto increment ! I dont know how to select that option as i was used to mysql way of doing things or does this have to be done as a stored procedure ?
Any assistance much appreciated.
I am very new to using SQL server 7. I've always used mysql in the past. I cant figure out howto create a autoincrementing key for my tables... is it possible to do in SQL7?? If so.. how.. i thought you just set the datatype to auto increment etc...
sorry for any oversights...
dave
Hello!
I is true that SQL-Server use lower values than last integer value (in auto incremet field). Is there option that i could prevent that. So the Server would always put + 1 for the auto increment value.
Thanks
Juissi
I would like to avoid using a cursor. I am updating several rows in a table with sequential numbers starting at a number I pass into the Stored Procedure. Is there a way to do this with one update statement?
Thanks,
Ken Nicholson
Sara Lee Corporation
Hey,
Here is what happened:
Users for a long time have been able to post new topics in our forums. However, a short time ago, the some users began to experience problems. What I have narrowed it down to is that upon inserting into the table, sometimes id value for the topic is the same as an id that is already in the table, so it fails to insert the record (due to a constraint). However, the topic id column is an auto-increment column and should just assign the next number for the id value.
Any ideas?
If delete all the records from a table that has an incremental identity. Is there a TSQL way of reset the first number on an insert back to be 1 again without going to the table taking it off then saving it the putting it back on again?
View 2 Replies View RelatedI have the following table:
Code:
CREATE TABLE [dbo].[apcName](
[SysID] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
[RIN] [int] NOT NULL,
[Name] [varchar](80) NOT NULL,
[DimTab] [tinyint] NOT NULL,
[code]....
If I have an Insert trigger to set the RIN field to the next available number in the sequence of the RIN column, why does the following work for inserting 1 and only 1 record at a time but fails if doing multiple rows with a single insert?
Code:
-- Insert Trigger
UPDATE xRec
SET RIN = (Select MAX(RIN) + 1 from apcName)
FROM apcName xRec
JOIN inserted ins
ON ins.sysID = xRec.sysID
-- Works, RIN is populated correctly
Code:
Insert apcName (Name, DimTab) VALUES ('Test Name', 1)
Does Not Work. Returns 1 for all RIN's
Code:
Insert apcName (Name, DimTab) VALUES
('Test Name1', 1),
('Test Name2', 2)
I have important a table from mircosoft access into ms sql server 2000, I've created a new ID row and set the primary key - but I need to use the ID from microsoft access as well. therefore I'd like to add an auto increment +1 on the old access ID field... but how do I do that?
View 1 Replies View Related