Index was outside the bounds of the array
When working with a SQL Server 2005 database and ASP.NET,
I get this error when trying to pull a small amount of data from the database,
Any help would be great, thanks a lot
I work for a large company, so I have to watch the code I release.
On the data tab in reporting services I have just named the stored procedure I wish to run. This Stored procedure expects a datetime parameter. When I select run in the data tab and enter the date (I have tried various different formats) the error "Index was outside the bounds of the array. (system data)". Does anyone know how this can be solved? it seems a simple issue but is turning into a pain to sort out.
View 9 Replies View RelatedI am experiencing of problem relating to the error message on the production SQLServer2012;
Index was outside the bounds of array. (Microsoft.SqlServer.Smo)
When I go to SQL 2012 through SSMS 2005, I get the message Index outside the bounds of array. Will it fix if I install SSMS 2012? Do I need to remove SSMS 2005?
View 1 Replies View RelatedI need to setup log shipping from a 2008 Standard to a 2012 Standard server. I have not found any restrictions for this, however, when I want to connect to the 2012 server on the add secondary server page, I receive the following error:'Index was outside the bounds of the array. (Microsoft.SqlServer.Smo)'.
View 3 Replies View RelatedCurrently underway with migrating from SQL 2005 to SQL2012. I have loaded all of my SSRS reports into Visual Studio 2010 (SQL Server Data Tools) and they all appeared to upgrade fine. I have 150+ reports and I'm in the middle of recreating a tonne of Subscriptions.
However, I have 4 reports that run fine, execute nicely.... but as soon as I click on 'Subscriptions' I get the index bounds array error.
I could attempt to re-create them. It's only 4 reports after all. But it doesn't answer the question, why would the reports execute fine, but unable to create a subscription?
I am getting this error "Index was outside the bounds of the array. (Microsoft.SQLServer.Smo)"..I have downloaded a hotfix, but when I tried running the patch, I was told the expected version is 10.2.4000.0, I am running 10.0.1600.22.I can not locate the correct patch for my version.
Microsoft SQL Server Management Studio
10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC)
6.1.7601.17514 (win7sp1_rtm.101119-1850)
Microsoft MSXML
3.0 6.0
Microsoft Internet Explorer
9.11.9600.17041
Microsoft .NET Framework
2.0.50727.5485
Operating System
6.1.7601
I am getting an intermittent problem with executing queries on my workstation. Whenever I execute a couple of store procedures that return a large numbers of rows (200,000 to 500,000 rows) I receive an intermittent error message when running the same sp with the same parameters sometimes the procedure runs fine and returns the result, sometimes I get an error message
Error message is: Index was outside the bounds of the array.
Sometimes
Error message is: Internal connection fatal error.
Sometimes I get a datetime overflow
I also occasionally get these intermittent messages when I execute the native query that the SP wraps.
I have SSMS 2015 SP1 installed on my workstation, the servers are a range of server from 2008 R2 SP2 to 2014 SP1. It feels like a client problem as there are applications connecting to these servers and running the stored procedures without issue...
Hi
If I delete 5 or more columns from a table I get the error "Index was outside the bounds of the array", OK is the only response. I then have to close the report and then open it again.
Easy fix is don't delete more than 5 columns, but my template is setup with 15 columns as it's far quicker to delete them as it is to add them 1 by 1 each time. I've finally got around to looking for a hotfix or something similar but can find no mention of this exact error relating to table column deleting.
Anyone else experience this or know if there is a hotfix for it?
Thanks
I got rid of the .rdl.data files, which apparently has been a successful fix for this problem in the past. Everything worked fine Thursday when I left (I was off Friday - Saturday), but today I get this error for all but one of the reports in the solution when I try to preview the report. BTW, the published stuff works fine. Thanks in advance for any help.
View 6 Replies View RelatedAll,
I am using Reporting Services 2005. One of my reports is getting the following error when I try to export to Excel. It will export to .CSV though.
"Destination array was not long enough. Check destIndex and length, and the array's lower bounds."
Any suggestions would be greatly appreciated. Please copy me at machelle.a.chandler@intel.com.
Machelle
Hi,
I really don't know why I'm getting this error! Index was outside the bounds of the array.
I am reading a comma-delimited flat file, line by line. This is part of my script component:
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim rowValues As String()
rowValues = Row.Line.Split(columnDelimiter) 'parse rows by comma
Row.col1 = rowValues(0).Replace("""", String.Empty)
Row.col2 = rowValues(1).Replace("""", String.Empty)
I've done this quite a few times before in other packages. WHY is it telling me that rowValues(1) is out of bounds?? I've commented out EVERYTHING in my script, except for these 2 rows. If I comment out Row.col2, I don't get the out of bounds error. If I include Row.col2, I get the out of bounds error, so it doesn't like rowValues(1).
The file has 13 columns in it. A row looks like this:
"ATMC","004930202",529.000000,"L",11.380000,6020.020000,7210.270000,6072.920000,"BSZTX","MTPO",,"Equities","My Fund Appreciation","06/30/2006"
Thanks
Dear All,
i'm getting an error "index array out of bound" while saving the record.
sql server 2005 with service pack1 system is working fine.
but at client place it is sql server 2005 with SP2. there we are getting error. any help....
windows 2003 sp1 at both the places. only the difference is
in sql server. how can i handle this
I have a stored procedure that has a paramter that accepts a string of values. At the user interface, I use a StringBuilder to concatenate the values (2,4,34,35,etc.) I would send these value to the stored procedure. The problem is that the stored procedure doesn't allow it to be query with the parameter because the Fieldname, "Officer_UID" is an integer data type, which can't be query against parameter string type.
What would I need to do to convert it to an Integer array?
@OfficerIDs as varchar(200)
Select Officer_UID From Officers Where Officer_UID in (@OfficerIDs)
Thanks
I have a database that is growing by 40 to 50 megs a day. I understand that the '_W' objects are statisical information for query performance and not indexes, but does anybody know how much disk space is actually used by these objects. I do have the 'auto create statistics' and 'auto update statistics' set on.
View 1 Replies View Relatedplease explain the differences btween this logical & phisicall operations that we can see therir graphical icons in execution plan tab in Management Studio
thank you in advance
I am using Full Text Index to index emails stored in BLOB column in a table. Index process parses stored emails, and, if there is one or more files attached to the email these documents get indexed too. In result when I'm querying the full text index for a word or phrase I am getting reference to the email containing the word of phrase if interest if the word was used in the email body OR if it was used in any document attached to the email.
How to distinguish in a Full Text query that the result came from an embedded document rather than from "main" document? Or if that's not possible how to disable indexing of embedded documents?
My goal is either to give a user an option if he or she wants to search emails (email bodies only) OR emails AND documents attached to them, or at least clearly indicate in the returned result the real source where the word or phrase has been found.
Dear All.
We had Teradata 4700 SMP. We have moved data from TD to MS_SQL SERVER 2003. records are 19.65 Millions.
table is >> Order_Dtl
Columns are:-
Client_ID varchar 10
Order_ID varchar 50
Order_Sub_ID decimal
.....
...
..
.
Pk is (ClientID+OrderId+OrderSubID)
Web Base application or PDA devices use to initiate the order from all over the country. The issue is this table is not Partioned but good HP with 30 GB RAM is installed. this is main table that receive 18,0000 hits or more. All brokers and users are using this table to see the status of their order.
The always search by OrderID, or ClientID or order_SubNo, or enter any two like (Client_ID+Order_Sub_ID) or any combination.
Query takes to much time when ever server receive more querys. some orther indexes are also created on the same table like (OrderDate, OrdCreate Date and Status)
My Question are:-
Q1. IF Person "A" query to DB on Client_ID, then what Index will use ? (If any one do Query on any two combination like Client_ID+Order_ID, So what index will be uesd.? How does MS-SQL SERVER deal with these kind of issues.?
Q2. If i create 3 more indexes on ClientID, ORderID and OrdersubID. will this improve the performance of query.if person "A" search record on orderNo so what index will be used. (Mind it their would be 3 seprate indexes for Each PK columns) and composite-Clustered index is also available.?
Q3. I want to check what indexes has been used? on what search?
Q4. How can i check what table was populated when, or last date of update (DML)?
My Limitation is i Dont Create a Partioned table. I dont have permission to do it.
In Teradata we had more than 4 tb record of CRM data with no issue. i am not new baby in db line but not expert in sql server 2003.
I am thank u to all who read or reply.
Arshad
Manager Database
Esoulconsultancy.com
(Teradata Master)
10g OCP
My SSIS package is running very slow taking so much time to execute, One task is taking 2hr for inserting 100k records, i have disabled unused index still it is taking time.I am rebuilding/Refreshing indexes and stats once in month if i try to execute on daily basis will it improve my SSIS Package performance?
View 2 Replies View RelatedKeep getting this error when positioning to the last page of a report.
Using Server 2003...SqlRpt Svcs 2000 sp2
Detail error msg:
Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. (rrRenderingError) Get Online Help
Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown.
Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index
Anyone have any suggestions? Any way to find out what collection is blowing?...or where parameter name: index comes from?
hello friends
i have table1 and 200 coulumn of table1 :) i have 647.600 records. i entered my records to table1 with for step to code lines in one day :)
i select category1 category2 and category3 with select code but i have just one index.. it is productnumber and it is primarykey..So my select code lines is so slow.. it is 7-9 second.. how can i select in 0.1 second ? Should i create index for category1 and category2 and category3 ? But i dont know create index.. My select code lines is below.. Could you learn me and show me index for it ?? or Could you learn me and show me fast Select code lines and index or etc ??? Also my search code line have a dangerous releated to attaching table1 with hackers :)
cheersi send 3 value of treview1 node and childnode and child.childnode to below page.aspx :)
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not Me.IsPostBack Then
If Request("TextBox1") IsNot Nothing ThenTextBox1.Text = Request("TextBox1")
End If
If Request("TextBox2") IsNot Nothing ThenTextBox2.Text = Request("TextBox2")
End If
If Request("TextBox3") IsNot Nothing ThenTextBox3.Text = Request("TextBox3")
End If
End If
Dim searchword As String
If Request("TextBox3") = "" And Request("TextBox2") = "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "'"
End If
If Request("TextBox3") = "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "' and kategori1= '" & Request("TextBox2") & "'"
End If
If Request("TextBox3") <> "" And Request("TextBox2") <> "" And Request("TextBox1") <> "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "' and kategori1= '" & Request("TextBox2") & "' and kategori2= '" & Request("TextBox3") & "'"
End If
SqlDataSource1.SelectCommand = searchword
End Sub
Hi,
I'm running a merge replication on a sql2k machine to 6 sql2k subscribers.
Since a few day's only one of the merge agents fail's with the following error:
The merge process could not retrieve generation information at the 'Subscriber'.
The index entry for row ID was not found in index ID 3, of table 357576312, in database 'PBB006'.
All DBCC CHECKDB command's return 0 errors :confused:
I'm not sure if the table that's referred to in the message is on the distribution side or the subscribers side? A select * from sysobjects where id=357576312 gives different results on both sides . .
Any ideas as to what is causing this error?
Hi everyone,
When we create a clustered index firstly, and then is it advantageous to create another index which is nonclustered ??
In my opinion, yes it is. Because, since we use clustered index first, our rows are sorted and so while using nonclustered index on this data file, finding adress of the record on this sorted data is really easier than finding adress of the record on unsorted data, is not it ??
Thanks
I have a clustered index that consists of 3 int columns in this order: DateKey, LocationKey, ItemKey (there are many other columns in this data warehouse table such as quantities, prices, etc.).
Now I want to add a non-clustered index on just one of the other columns, say LocationKey, like this:
CREATE INDEX IX_test on TableName (LocationKey)
I understand that the clustered index keys will also be added as key columns to any NC indexes. So, in this case the NC index will also get the other two columns from the clustered index added as key columns. But, in what order will they be added?
Will the resulting index keys on this new NC index effectively be:
LocationKey, DateKey, ItemKey
OR
LocationKey, ItemKey, DateKey
Do the clustering keys get added to a NC index in the same order as they are defined in the clustered index?
Quick question about the primary purpose of Full Text Index vs. Clustered Index.
The Full Text Index has the purpose of being accessible outside of the database so users can query the tables and columns it needs while being linked to other databases and tables within the SQL Server instance.
Is the Full Text Index similar to the global variable in programming where the scope lies outside of the tables and database itself?
I understand the clustered index is created for each table and most likely accessed within the user schema who have access to the database.
Is this correct?
I am kind of confused on why you would use full text index as opposed to clustered index.
Thank you
Goldmember
Hi All,
I 'm working to improve some sql performance.
One of the major syntax inside the SELECT statment is ..
WHERE FIELDA IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='A') AND
WHERE FIELDB IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='B') AND
WHERE FIELDC IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='C') AND
WHERE FIELDD IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='D') AND
WHERE FIELDE IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='E') AND
WHERE FIELDF IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='F')
(It's to compare the field content with some user input parameter inside a parameter table... )
I think properly is that the SELECT ... IN is causing much slowness in the sql statement. I have indexed FIELDA , FIELDB, FILEDC etc and those PARAVALUE and PARATYPE in the PARATABLE table. But perfromance is still slow and execution takes >20 seconds for 200000 rows of records.
Do any one know if still any chance to improvide the performance like this?
Much Thanks,
Andy
I'm trying to find whether there is a dmv or system view that can help me see the last time an index was rebuilt or created. Assuming I rebuilt an index using tsql commands (not a job with a history), is there a way to find out the last time that index was rebuilt?
Thanks much.
how can i send array from asp.net to sql?
View 3 Replies View RelatedHi, I am trying to do a loop while a list of array is assigned ('CHP,CNH,COW') ... I am using comma seperator to get each list value ... but, it donest really do what I am trying to do ... pls help!!! How do I loop through each value and do the rest ...??
=====================================
DECLARE @ABBR AS NVARCHAR(50)SET @ABBR = 'CHP,CNH,COW'
DECLARE @SEP AS NVARCHAR(5)SET @SEP = ','
WHILE patindex('%,' + @ABBR + ',%', @ABBR ) > 0 BEGIN
-- do the rest
END
I want to do a query on an SQL Server 2005 db and have the results returned into aarray or collection in vb.net... how do I do this? I know the basicconnection and stuff.. just not how to get the result to an array thanks!
View 1 Replies View RelatedHi All,
I have this code below:Dim a As Integer = 0 While a <= myArray.Length() Conn.Open() Dim UpdateCmd As New SqlClient.SqlCommand("Update email_addr SET category = 'Deleted' where HP = @hp", Conn) UpdateCmd.Parameters.Add("@hp", SqlDbType.VarChar, 50).Value = myArray(a) UpdateCmd.ExecuteNonQuery() a = a + 1 Conn.Close() End While
BUt, When I run it, I receive error "Prepared statement '(@hp varchar(50))Update email_addr SET category = 'Deleted' wher' expects parameter @hp, which was not supplied. "
DOes anyone have the solution???
Thanks....
Hello, how can I use an array in a WHERE clause? If I had an array saystring[] NamesArray = new string[] {"Tom", "***", "Harry"} How would I do this:string myquery = "SELET name, city, country FROM myTable WHERE name in NamesArray" Thanks in advance,Louis
View 3 Replies View RelatedHi,
i m pretty new to this forum and c#.net
i m doin a project in c#.net
I have four values in my datarow array
for example
DataRow[] cmb;
cmb=dsResult.Tables[0].Select("Controls Like 'cmb%'");// Here i m getting four Rows
for(i=0;i<cmb.Length;i++)
{
cmb[i]=Session["cmb'+i].ToString().Trim()//Here i m getting error;Cannot implicitly convert type 'string' to 'System.Data.DataRow'
}
How to assign my session values to them.
I want to assign my value stored in the session variable to that array.Is there any way i can do it.Can i convert datarow array to string array! Please can any one help
me.