Indexing Results Of Stored Proc (or New Table Created By One)
Jul 20, 2005
Hi,
I am using data from multiple databases and/or queries. It would greatly
simplify and speed things up if I could use CONTAINS in processing the
results. However, "CONTAINS" requires the data to be indexed. Due to the
amount of processing, I think it would be faster even if I had to re-index
every time.
For example, I would like to do something like this (simplified to
illustrate the desired functionality... This should show all of the words
from one table that are not contained in their current or inflectional forms
within another table):
SELECT W1.Content
FROM
(SELECT Word AS Content
FROM MyTable) W1
LEFT OUTER JOIN
(SELECT Phrase AS Content
FROM MyOtherTable) W2
ON W2.Content CONTAINS(INFLECTIONAL, W1.Content)
WHERE W2.Content IS NULL
Can the results of a procedure be indexed? If not, can I drop the results
into a new table and trigger an automatic index of it, pausing the procedure
until the indexing is done?
Hi All, I have a stored proc which is executing successfully...but the results of that stored proc are displaying in the Messages Tab instaed of results Tab. And in the Results Tab the results shows as 0..So, Any clue friends..it is very urgent..I am trying to call this stored proc in my Report in SSRS as well but the stored proc is not displaying there also...Please help me ASAP..
I'm trying to fire a DTS package through a stored procedure. After running my one stored procedure I got my DTS file to create just fine. However after this point I'm stuck...I can't do anything else with this file and I need to update data with it. How would I use the DTS file to update my data. Thanks, RB
ALTER PROCEDURE [dbo].[usp_CrimRecTest] -- Add the parameters for the stored procedure here @caseID [nvarchar]
AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON;
-- Insert statements for procedure here SELECT dbo.tblCASENOMASTER.CASENO, dbo.tblCASEMAST.LASTNAME, dbo.tblCASEMAST.FRSTNAME FROM dbo.tblCASENOMASTER LEFT OUTER JOIN dbo.tblCASEMAST ON dbo.tblCASENOMASTER.CASENO = dbo.tblCASEMAST.CASENO WHERE (dbo.tblCASENOMASTER.CASENO = @caseID) END
When I run this with an EXEC statement, the result pane shows no results but the message pane says it completed successfully and one row is affected. I know my input data is good. I also get nothing when I call this sproc from a VB front end. Any ideas?
Hi guys. I'm trying to compare the results from various stored procedures. Various stored procedures in our database got redone (refactored), and I want to see if they still pull back the same data.
Are there any programs out there that do this? Compare result sets from stored procedures? Any help is appreciated. Thanks!
Try hard to become familiar with T-SQL.Can anybodey tell me the best way to deal with set's provided by astored procedure. Til yesterday I thougt trapping set in temp tableusing INSERT EXEC is a way out of this, but then I struggeled withnested INSERT EXEC's.What are all the system proc's good for if the results cannot beevaluated? The approach of modular programming is to have code doingsimilar things in one place.If I try to make use of sp_helprolemember to get login names for moreroles, pack the logins in one table and return the result set in a SP,the procedure which calls that is unable to evaluate the set.On the other hand I read the advice, not to access system tablesdirectly.Is there a way out?
I have a search stored proc which fails to return results when called by more than one user.
I have put selects in the various SPs to trace results and if I call from 3 query windows (executnig each as quickly as I can work the mouse) I get the following: 1st query returns the trace values (including correct count of temp table recs) but no result set 2nd query erturns nothing just "The command(s) completed successfully." 3rd query returns full results.
This seems to be consistent.
We are running SQL Server 7 SP1. Just upgrading to SP2 to see if that helps.
The main SP calls other SPs to build result sets. These use quite a few temp tables passed between SPs, parse CSV lists, join different other tables, create a SQL string to exec to do the search and get record IDs to return (no cursors). The result set is built by a called SP using the temp table with IDs to return.
Anyone know of any problems or can suggest anything to try?
Hi,I have written a stored procedure which includes a DATEPART command, i.e.DATEPART(weekday, <date>)The result when ran from SQL Query Analyser is as expected . i.e. Sundayreturns 1, Monday 2, etcWhen the same proc is called from within the Access 2000 project Sundayis returned as 7, Saturday as 6 instead of 1 and 7 respectively.Basically the same stored proc returns different data depending on fromwhere it has been called.This is causing some issues obviously as the resulting tables andreports are showing incorrect data when presented in Access 2000.Has anyone else experienced this before or have any idea what may cause it.Regards,PB
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code. So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message: Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages. (1 row(s) affected) (1 row(s) affected) I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution? Also, Is there a way to trace into a stored procedure through Query Analyzer? -------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised: SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
Need some suggestions on what to check or look for.My stored proc is not finding the table in the sql db. This is the error...Invalid object name 'tblServRec'I use the same function to pass in an arraylist and the sp name for another sp and that one works ok.The sp is the same as another one except for the table name and that one works ok.The sp works fine on my local machine. It finds the table ok. But when I try it on the server, it doesn't work.I have checked permissions, and they are the same for all tables, even the one that the other sp works ok on the server.Here is the sp if that will help.....CREATE PROCEDURE dbo.deleteServRec @fldNum INT ASBEGIN DECLARE @errCode INT DELETE FROM tblServRec WHERE fldNum = @fldNum SET @errCode = 0 RETURN @errCode HANDLE_APPERR: SET @errCode = 1 RETURN @errCodeENDGOThanks all,Zath
I take the information below in query analyzer and everything runs fine-returns 48 rows. I try to run it as a stored proc and I get no records. If I put a simple select statement into the stored proc, it runs, so it's not permissions. Can anyone help me with why this won't execute as a stored procedure? Articles seem to indicate you can do this with temp tables in a stored procedure. Thanks
declare @style as int, @disc as int, @key as varChar(500), @sdate as varChar(15), @edate as varChar(15), @ld as varChar(15)
set @style=0 set @disc=0 set @sdate='3/1/2006' set @ld='2'
insert into #ListAll SELECT top 100 percent wid, parentID, 0 as myFlag FROM myTable WHERE (@style=0 or styleID=@style) and (@edate is null or start_date < @edate) and ((start_date is null) or (datediff(day,start_date,@sdate) <1)) and (@ld='9' or charIndex(convert(varchar(1),datepart(dw,start_dat e)),@ld)>0) and wid in (select wid from myTable2 where (@disc=0 or discID=@disc)) and wid in (select wid from myTable where @key is null or ([title] like '%' + @key + '%' or [keywords] like '%' + @key + '%'))
update #ListAll set myFlag=1 where parentID<>0 insert into #ListAll select w.wid, w.parentID, 0 as myFlag from myTable w right join #ListAll on #ListAll.parentID=w.wid where #ListAll.parentID<>0 delete #ListAll where myFlag=1
SELECT top 100 percent srt, w.WID, w.parentID, w.[title], w.start_date, w.end_date, w.cancelled, w.url, styleID, w.[keywords], w.onlineID, w.httplocation, datepart(dw,w.start_date) as lddate FROM myTable w right join #ListAll on #ListAll.wid=w.wid ORDER BY srt, start_date, [title]
Recently someone told me that I could use a Parameter in a Stored Proc as a text placeholder in the SQL Statement. I needed to update a table by looping thru a set of source tables. I thought NOW IS MY TIME to try using a parameter as a table name. Check the following Stored Proc
CREATE PROCEDURE [dbo].[sp_Update] @DistributorID int, @TableName varchar(50) AS UPDATE C SET C.UnitCost = T.[Price] FROM (tbl_Catalog C INNER JOIN @TableName T ON C.Code = T.Code) GO
NEEDLESS TO SAY this didn't work. In reviewing my references this seems to be a no no.
Is it possible to use a parameter as a table name? OR is there another way to do this?
We have modified a column name for a table. Now we need to find out all the database objects (stored procedures, functions, views) which access this table so that we can modify them. This is a very big database and its not easy to open the code for each object and check if its access that table. To add to the complexity, its not just one table and column but a number of tables have been modified.
I am looking to populate a Schedule table with information from twoother tables. I am able to populate it row by row, but I have createdtables that should provide all necessary information for me to beableto automatically populate a "generic" schedule for a few weeks ormoreat a time.The schedule table contains:(pk) schedule_id, start_datetime, end_datetime, shift_employee,shift_positionA DaysOff table contains:(pk) emp_id, dayoff_1, dayoff_2 <-- the days off are entered in dayofweek (1-7) formA CalendarDays table contains:(pk) date, calendar_dow <-- dow contains the day of week number (asabove) for each day until 2010.My main question is how to put all of this information together andhave SQL populate the rows with data based on days off, for a fewweeks in advance. Anysuggestions?
I am looking to populate a Schedule table with information from twoother tables. I am able to populate it row by row, but I have createdtables that should provide all necessary information for me to beableto automatically populate a "generic" schedule for a few weeks ormoreat a time.The schedule table contains:(pk) schedule_id, start_datetime, end_datetime, shift_employee,shift_positionA DaysOff table contains:(pk) emp_id, dayoff_1, dayoff_2 <-- the days off are entered in dayofweek (1-7) formA CalendarDays table contains:(pk) date, calendar_dow <-- dow contains the day of week number (asabove) for each day until 2010.My main question is how to put all of this information together andhave SQL populate the rows with data based on days off. Anysuggestions?
Hello,Does anyone know of a way to loop thru a SQL table using code in a storedprocedure?I need to go thru each record in a small table and build a string usingvalues from the fields associated with a part number, and I can't find anyway to process each record individually. The string needs to be initializedwith the data associated with the 1st record's part number, and I need tobuild the string until a new part number is incurred. Once a new part numberis found in the table, the string is written to a different table and resetfor this next part number in the table. Need to repeat until all records inthe table have been processed.I use ADO in access 2000 to work thru local recordsets, I just can't findanyway to do this in a stored SQL procedure.Thanks for any suggestions, Eric.
Hi, How can I store a stored procedure's results(returning dataset) intoa table?Bob*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
i'm trying to create a stored procedure that takes 2 input parameters (taken from a querystring): a table name, and a number that needs to be checked whether it exists within that table. yes, i have different tables, one for each forum, so they will have the same structures -- i'm figuring this approach will result in faster page-load times if the tables have less in them. if everyone here tells me that having one table for all the forums will work fine, i'll just go that route, but if not, here's my procedure:
Create Procedure VerifySubjectNum (@forum_ID VARCHAR(10), @subject_num INT) As If Exists (SELECT subject_num FROM @forum_ID WHERE subject_num = @subject_num) Return 1 Else Return 0
when i try to create this, i get an error saying @forum_ID must be declared... why doesn't it work within the select for the EXISTS?
Hi folks, I have a procedure that pefroms some action and creates the outputs to a temporary table #mytable. I want to call this procedure and take the results from #mytable within the procedure. Can i. If i call #mytable after executing the procedure; won't work. Means that the table gets dropped and doesn't prolong for the session?
I know there maybe something similar of what im asking for but i just cant find it.
I have 3 Stored procedure.
SPA - create a temporary table "sp_getListOfChildren" SPB - insert the data into the temp table "sp_InsertCategoriesFound" SPC - display the list of categories i found "sp_ListingAvailableCategories"
process: SPA call SPB and SPC call SPA
my problem is in the SPC. it seems that the table doesnt exist anymore when i do a select but in the message tab of my sql analyser i can see that the table have some data before executing that store proc..
Invalid object name '#TblTempCat'. for my SPC !! ??? why.. how do i detect a temp table in diffirent stored procedure per user and as to be temp table.. for multiple access.. "WEB"
============MY "SPC" CODE============= alter PROCEDURE sp_ListingAvailableCategories @CurrentCategoryID AS uniqueidentifier AS
exec sp_getListOfChildren @CurrentCategoryID
select * from #TblTempCat
select * from TblCategories where CatID not in (select CatID from #TblTempCat) and CatId <> @CurrentCategoryID
Is there a way to delete records from table passing parameter as tablename? I won't to delete all records from a table dependent on table selected. i'm trying to do this with stored procedure...Table to delete depends on the checkbox selected.
Current code(works) Public Function DelAll() MZKDB = MZKHRFin If sloption = "L" Then sqlConn.ConnectionString = "Server=" & MZKSrv & ";Initial Catalog=" & MZKDB & ";Integrated Security=SSPI;" ElseIf sloption = "S" Then sqlConn.ConnectionString = "Server=" & MZKSrv & ";User id=sa;Password=" & MZKPswd & "; Initial Catalog=" & MZKDB & ";" End If sqlConn.Open() sqlTrans = sqlConn.BeginTransaction() sqlCmd.Connection = sqlConn sqlCmd.Transaction = sqlTrans Try sqlCmd.CommandText = sqlStr sqlCmd.ExecuteNonQuery() sqlTrans.Commit() frm2.txtResult.Text = frm2.txtResult.Text & " " & TableName & " Prior records have been deleted from the database." & vbCrLf SetCursor() Catch e As Exception Try sqlTrans.Rollback() Catch ex As SqlException If Not sqlTrans.Connection Is Nothing Then frm2.txtResult.Text = frm2.txtResult.Text & " " & TableName & " An exception of type " & ex.GetType().ToString() & " was encountered while attempting to roll back the transaction." & vbCrLf SetCursor() End If End Try frm2.txtResult.Text = frm2.txtResult.Text & " " & TableName & " Records were NOT deleted from the database." & vbCrLf SetCursor() Finally sqlConn.Close() End Try ResetID() End Function If cbGenFY.Checked Then sqlStr = "DELETE FROM FIN_FiscalYear" TableName = "dbo.FIN_FiscalYear" DelAll() ClearCounts() timeStepStart = Date.Now GenFY() timeStepStop = Date.Now
DispOneCounts() End If If cbGenFund.Checked Then sqlStr = "DELETE FROM FIN_Fund" TableName = "dbo.FIN_Fund" DelAll() ClearCounts() timeStepStart = Date.Now GenFund() timeStepStop = Date.Now DispOneCounts() End If If cbGenFunc.Checked Then sqlStr = "DELETE FROM FIN_Function" TableName = "dbo.FIN_Function" DelAll() ClearCounts() timeStepStart = Date.Now GenFunc() timeStepStop = Date.Now DispOneCounts()
End If If cbGenObject.Checked Then sqlStr = "DELETE FROM FIN_Object" TableName = "dbo.FIN_Object" DelAll() ClearCounts() timeStepStart = Date.Now GenObject() timeStepStop = Date.Now DispOneCounts() End If If cbGenCenter.Checked Then sqlStr = "DELETE FROM FIN_Center" TableName = "dbo.FIN_Center" DelAll() ClearCounts() timeStepStart = Date.Now GenCenter() timeStepStop = Date.Now DispOneCounts() End If If cbGenProject.Checked Then sqlStr = "DELETE FROM FIN_CodeBook" TableName = "dbo.FIN_CodeBook" DelAll() sqlStr = "DELETE FROM FIN_BudgetAccnt" TableName = "dbo.FIN_BudgetAccnt" DelAll() sqlStr = "DELETE FROM FIN_Budget" TableName = "dbo.FIN_Budget" DelAll() sqlStr = "DELETE FROM FIN_Project" TableName = "dbo.FIN_Project" DelAll() ClearCounts() timeStepStart = Date.Now GenProject() timeStepStop = Date.Now TableName = "dbo.FIN_Project" DispOneCounts() End If If cbGenProgram.Checked Then sqlStr = "DELETE FROM FIN_Program" TableName = "dbo.FIN_Program" DelAll() ClearCounts() timeStepStart = Date.Now GenProgram() timeStepStop = Date.Now DispOneCounts() End If If cbGenGL.Checked Then sqlStr = "DELETE FROM FIN_gl" TableName = "FIN_gl" DelAll() ClearCounts() timeStepStart = Date.Now GenGL() timeStepStop = Date.Now DispOneCounts() End If If cbGenRevenue.Checked Then sqlStr = "DELETE FROM FIN_Revenue" TableName = "FIN_Revenue" DelAll() ClearCounts() timeStepStart = Date.Now GenRevenue() timeStepStop = Date.Now DispOneCounts() End If If cbGenBank.Checked Then sqlStr = "DELETE FROM FIN_VendorBankAccnt" TableName = "dbo.FIN_VendorBankAccnt" DelAll() sqlStr = "DELETE FROM FIN_VendorBank" TableName = "dbo.FIN_VendorBank" DelAll() sqlStr = "DELETE FROM FIN_bankAdd" TableName = "dbo.FIN_bankAdd" DelAll() sqlStr = "DELETE FROM FIN_bankTERMS" TableName = "dbo.FIN_bankTerms" DelAll() sqlStr = "DELETE FROM FIN_bank" TableName = "dbo.FIN_bank" DelAll() ClearCounts() timeStepStart = Date.Now GenBank() timeStepStop = Date.Now TableName2 = "dbo.FIN_bankTERMS" TableName3 = "dbo.FIN_BankAdd" TableName4 = "dbo.FIN_VendorBank" TableName5 = "dbo.FIN_VendorBankAccnt" DispTwoCounts() End If If cbFinAP.Checked Then sqlStr = "DELETE FROM FIN_Period" TableName = "FIN_Period" DelAll() ClearCounts() timeStepStart = Date.Now GenPeriod() timeStepStop = Date.Now DispOneCounts() End If
Hi I wanted to use the table variable in Stored proc , for that i have create the table variable in the main SP which will be used by again called sp(child SPs) now when i am trying to use the same table variable in the child SP, at the time of compliation it is showing error
Msg 1087, Level 15, State 2, Procedure fwd_price_cons, Line 149 Must declare the table variable "@tmp_get_imu_retn".
Can any body give me the idea how to complile the child SP with the same table variable used in the main SP.
Can anyone helpCREATE PROCEDURE PagedResults_New (@startRowIndex int, @maximumRows int ) AS
--Create a table variable DECLARE @TempItems TABLE (ID int IDENTITY, ShortListId int ) -- Insert the rows from tblItems into the temp. table INSERT INTO @TempItems (ShortListId) SELECT Id FROM shortlist SWHERE Publish = 'True' order by date DESC
-- Now, return the set of paged records SELECT S.*, C.CategoryTitleFROM @TempItems t INNER JOIN shortList S ON t.ShortListId = S.Id WHERE ID BETWEEN @startRowIndex AND (@startRowIndex + @maximumRows) - 1 GO
I have a stored proc that inserts into a table variable (@ReturnTable) and then ends with "select * from @ReturnTable."
It executes as expected in Query Analyzer but when I call it from an ADO connection the recordset returned is closed. All the documentation that I have found suggests that table variables can be used this way. Am I doing somthing wrong?
I have a "source" table that is being populated by a DTS bulk importof a text file. I need to scrub the source table after the importstep by running appropriate stored proc(s) to copy the source data to2 normalized tables. The problem is that table "Companies" needs tobe populated first in order to generate the Identity ID and then usethat as the foreign key in the other table.Here is the DDL:CREATE TABLE [dbo].[OriginalList] ([FirstName] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[LastName] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[Company] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[Addr1] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[City] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[State] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[Zip] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[Phone] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL) ON [PRIMARY]GOCREATE TABLE [dbo].[Companies] ([ID] [int] IDENTITY (1, 1) NOT NULL ,[Name] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE TABLE [dbo].[CompanyLocations] ([ID] [int] IDENTITY (1, 1) NOT NULL ,[CompanyID] [int] NOT NULL ,[Addr1] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[City] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[State] [varchar] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[Zip] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[Phone] [varchar] (14) COLLATE SQL_Latin1_General_CP1_CI_AS NULL) ON [PRIMARY]GOThis is the stored proc I have at this time that does NOT work. Ituses the last Company insert for all the CompanyLocations which is notcorrect.CREATE PROCEDURE DataScrubSP ASBegin Transactioninsert Companies (Name) select Company from OriginalListIF @@Error <> 0GOTO ErrorHandlerdeclare @COID intselect @COID=@@identityinsert CompanyLocations (CompanyID, Addr1, City, State, Zip) select@COID, Addr1, City, State, Zip from OriginalListIF @@Error <> 0GOTO ErrorHandlerCOMMIT TRANSACTIONErrorHandler:IF @@TRANCOUNT > 0ROLLBACK TRANSACTIONRETURNGOThanks for any help.Alex.
I need to write a storedproc that receives the name of a table (as a string) and inside the stored proc uses select count(*) from <tablename>. The problem is the passed in tablename is a string so it can't be used in the select statement. Any ideas how I can do what I want?
Hi, Summary: When my stored procedure uses temporary tables then the TableAdapter won't be able to work out the field names and so won't work. I get an error in the TableAdapter configure wizard saying: Invalid object name '#TempTable'. I'm not doing anything unusual so this must be a common problem. Let me explain: I'm using Visual Studio 2005 and SQL Server 2000. Detail: I've written a new stored procedure (SP) that uses a temporary table in calculating the resulting results set (several fields with several rows). I recon the temporary table bit is significant. I've created a new DataSet in VS2005 and dragged the stored proc onto the DataSet design surface. I right click on the TableAdapter and enter the 'configure'. The problem is that the wizard doesn't think any fields are being returned by the SP. If I try and do it another way I get the same problem: Right click on DataSet and add new TableAdapter (same thing happens, it won't recognise that there are fields being returned from the SP). FYI: If I do it for an SP that doesn't use any temporary tables it all works like a dream (problem is that I need to use temporary tables as its complex ). Thanks for any advise
