Inner Join Part 2
Dec 7, 2006
Getting back way too many records with this on - over 4500 and should only be about 350.....
Here's the sql that's not working right:
SELECT c.Name, a.ID, a.Description, s.Status, b.Location, a.scheduleBegin, a.scheduleEnd
from tblEquipments a
inner join tblEquipments_Group U on u.categoryID = a.EquipmentType
inner join tblStatus S on a.status = S.statusID
and u.subCategoryID = @type
inner join tblLocation b on a.status = b.locationID
inner join tblSubCategories c on u.subCategoryID = @type
and c.Parent = @type
The table tblSubCategories has a field Name that I need.
tblSubCategories has a field, Parent, that will = @type
See this post for the other table fields if needed.
http://forums.asp.net/thread/1489880.aspx
If I omit the last inner join, all is ok, but I need that last bit of info - the c.Name.
Suggestions?
Thanks,
Zath
View 1 Replies
ADVERTISEMENT
Apr 15, 2008
I made a part 2 because it would clear things up I guess.
Right, so I have this SP with
....
Select
ZMZKOrder zk
right join ZMProduct pr on (zk.zkproductid = pr.productid)
...
AND we have
...
Where
((zk.zkmoduleid = @moduleid) or (zk.zkmoduleid is Null))
....
Actually what I want is:
If there really is a corresponding productid (because of the right join, this doesn't have to be true) it must check that this zk.zkmoduleid = @moduleid is true.
And if there is NO corresponing productid, it must check that zk.zkmoduleid is Null is true.
And not both at the same time.
Does anyone have any ideas please?
View 18 Replies
View Related
Jan 12, 2008
Hello,
I recently created a linked server to db2. When I do a join on the linked server it is returning to much data.
select * from table1 left join [linkedServer]..Schema.Table as tb1 on table1.id=tb1.id
For now, I had to first get the ids I wanted from table1 and then use a subquery to join table1 on the a result set produced from a query to the linked server that only specified those ids. Below is an example
select * from table1 left join (select col1 from [linkedServer]..Schema.table where id=1 or id=2) as tb1 on table1.id=tb1.id
I'm guessing I have some setting wrong. One of the biggest reasons for me to use the four part name is so I can do joins like the first example.
Please let me know if you have any ideas.
Thanks
View 4 Replies
View Related
Jul 14, 2015
I have a table like this :
reg.no |Â Â description |Â start_date |Â end_date |Â Â load_date
I want to join this table with itself on reg. no. But not all the rows in table must be joined.
But for example, rows with load_date 01-07-2015 to be joined with rows with load_date 02-07-2015. And the rest of the rows should not used in join (for example, rows having other load_dates)
Is this possible ? and how?
View 4 Replies
View Related
Jul 22, 2014
I'm writing a query where I have multiple left-outer joins but I keep getting multi-part identifier error. See the query below?
SELECT gl.seg5 Natural
,gl.seg2 Office
,gl.seg3 Dept
,gl.seg4 Team
,gl.seg6 Sub
,gl.seg7 Tkpr
,gl.seg1 Comp
,'CHK' Source
[Code] ....
Errors
Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.baid" could not be bound.
Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.cknum" could not be bound.
Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.ckline" could not be bound.
View 5 Replies
View Related
Nov 6, 2006
Hello,
i am facing a bizarre problem, accessing data from a remote server which has been linked to my sql.
My SQL server is 2005 and the remote server is SQL 2000.
i have linked the remote server (called LinkedServer) so that when i run this query:
SELECT * FROM LinkedServer.SomeDB.dbo.SomeTable
executes successfully! However, when i run a similar query like this:
SELECT Column1 AS Col1,
LinkedServer.SomeDB.dbo.SomeTable.Column2 as Col2,
Alias.Column3 as Col3
FROM LinkedServer.SomeDB.dbo.SomeTable
INNER JOIN LinkedServer.SomeDB.dbo.SomeOtherTable1 ON LinkedServer.SomeDB.dbo.SomeTable.Column3 = LinkedServer.SomeDB.dbo.SomeOtherTable1.Column3
INNER JOIN LinkedServer.SomeDB.dbo.SomeOtherTable2 AS Alias
ON LinkedServer.SomeDB.dbo.SomeTable.Column3 = Alias.Column3
It gives me this error:
The multi-part identifier "LinkedServer.SomeDB.dbo.SomeTable.Column2" could not be bound.
The multi-part identifier "LinkedServer.SomeDB.dbo.SomeTable.Column3" could not be bound.
I have noticed that this error is generated only for the selected columns whose path has either been repeated (e.g. "LinkedServer.SomeDB.dbo.SomeTable.Column2" as opposed to "Column2") or for columns which are from aliased tables.
What is going on?!?!?!??!?!?!
Any Help would be tremendously appreciated!!!! 8..)
View 8 Replies
View Related
Oct 29, 2007
I have SSRS 2005 SP2 configured to work in Sharepoint integration. Everything works fine except that I am not able to programmatically change any property of report viewer web part (instance) that I have added on on home page of my sharepoint site.
I can do same thing via sharepoint UI but not through program. When my programs runs it fetches all web parts been added on home page, then I need to iterate through each one and find report viewer web part.
While iterating, as soon as I arrive to report viewer web part it is named as "Error web part" with error message as
"Windows SharePoint Services cannot deserialize the Web Part. Check the format of the properties and try again"
If someone has a solution, please respond at your earlist.
Thanks
Shankar
View 1 Replies
View Related
Dec 7, 2007
I have a table with a column named measurement decimal(18,1). If the value is 2.0, I want the stored proc to return 2 but if the value is 2.5 I want the stored proc to return 2.5. So if the value after the decimal point is 0, I only want the stored proc to return the integer portion. Is there a sql function that I can use to determine what the fraction part of the decimal value is? In c#, I can use
dr["measurement "].ToString().Split(".".ToCharArray())[1] to see what the value after the decimal is.
View 3 Replies
View Related
Jan 28, 2015
I have made the following Scalar-valued function:
CREATE FUNCTION [dbo].[TimeCalc]
(
@OriginalTime AS INTEGER
, @TenthsOrHundredths AS INTEGER -- code 2: 1/10, code 4: 1/100
)
RETURNS NVARCHAR(8)
[Code] ....
What it does is convert numbers to times
E.g.: 81230 gets divided by 10 (times in seconds: 8123). This 1 1 full minute, and the remainder = 2123 making it 1.21.23 mins)
So far so good (function works perfectly)
My question: sometimes times are in 1/100 (like above sample), sometimes in 1/10.
This means that, e.g. with a time like 3.23.40 the last zero must be deleted.
My thoughts are to use the results from the Return Case part, and as the code = 4: leave it as it is,
is the code 2 the use LEFT(... result Return Case ..., Len(..result Return Case.. - 1))
There are 5 codes: 0 1 2 3 and 4
View 9 Replies
View Related
Apr 30, 2008
Hello
Can any one tell me the difference between Cross Join, inner join and outer join in laymans language
by just taking examples of two tables such as Customers and Customer Addresses
Thank You
View 1 Replies
View Related
Apr 12, 2006
What different are there between connectionString (Part 1) and connectionString (Part 2) in web.config
The CCWW is my PC's name, normally I can connect to the database ASPNETDB.MDF correctly either Part 1 or Part 2 in a web page,After I open Database Explorer panel and browse ASPNETDB.MDF, I can't connect to database using Part 2 when I open a webpage in Microsoft Visual Web Developer 2005 Express Edition,but I can correctly open a webpage using Part 1 after I open Database Explorer panel.
What different are there between connectionString (Part 1) and connectionString (Part 2) in web.config?
I guess while I use Part 1 to connect, maybe it will be cancel exclusive method of the database ASPNETDB.MDF first, but when I connect to database using Part 2, maybe two programms both Part 2 and Database Explorer visit ASPNETDB.MDF at the same time!
--------------------------------------Part 1------------------------------------------------------------------------<add name="MyConnect" connectionString="Data Source=.SQLExpress;Integrated Security=True;User Instance=True;AttachDBFilename=|DataDirectory|ASPNETDB.MDF" providerName="System.Data.SqlClient" /> --------------------------------------Part 1------------------------------------------------------------------------
--------------------------------------Part 2------------------------------------------------------------------------<add name="MyConnect" connectionString="Data Source=CCWWSQLEXPRESS;Initial Catalog=ASPNETDB.MDF;Integrated Security=True;User Instance=True;AttachDBFilename=|DataDirectory|ASPNETDB.MDF" providerName="System.Data.SqlClient" />--------------------------------------Part 2------------------------------------------------------------------------
View 2 Replies
View Related
May 22, 2015
I have two xml source and i need only left restricted data.
how can i perform left restricted join?
View 2 Replies
View Related
Oct 8, 2015
I was writing a query using both left outer join and inner join. And the query was ....
SELECT
       S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname
FROM
       Production.Suppliers AS S LEFT OUTER JOIN
      (Production.Products AS P
        INNER JOIN Production.Categories AS C
[code]....
However ,the result that i got was correct.But when i did the same query using the left outer join in both the cases
i.e..
SELECT
       S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname
FROM
       Production.Suppliers AS S LEFT OUTER JOIN
(Production.Products AS P
LEFT OUTER JOIN Production.Categories AS C
ON C.categoryid = P.categoryid)
ON
S.supplierid = P.supplierid
WHERE
S.country = N'Japan';
The result i got was same,i.e
supplier   country   productid   productname   unitprice   categorynameSupplier QOVFD   Japan   9   Product AOZBW   97.00   Meat/PoultrySupplier QOVFD   Japan  10   Product YHXGE   31.00   SeafoodSupplier QOVFD   Japan  74   Product BKAZJ   10.00   ProduceSupplier QWUSF   Japan   13   Product POXFU   6.00   SeafoodSupplier QWUSF   Japan   14   Product PWCJB   23.25   ProduceSupplier QWUSF   Japan   15   Product KSZOI   15.50   CondimentsSupplier XYZ   Japan   NULL   NULL   NULL   NULLSupplier XYZ   Japan   NULL   NULL   NULL   NULL
and this time also i got the same result.My question is that is there any specific reason to use inner join when join the third table and not the left outer join.
View 5 Replies
View Related
Dec 23, 2014
I have two select statements, in between select statement taking UNION ALL . I need to avoid the error
Warning: The join order has been enforced because a local join hint is used.
View 9 Replies
View Related
Aug 10, 2007
Scenario:
OLEDB source 1
SELECT ...
,[MANUAL DCD ID] <-- this column set to sort order = 1
...
FROM [dbo].[XLSDCI] ORDER BY [MANUAL DCD ID] ASC
OLEDB source 2
SELECT ...
,[Bo Tkt Num] <-- this column set to sort order = 1
...
FROM ....[dbo].[FFFenics] ORDER BY [Bo Tkt Num] ASC
These two tasks are followed immediately by a MERGE JOIN
All columns in source1 are ticked, all column in source2 are ticked, join key is shown above.
join type is left outer join (source 1 -> source 2)
result of source1 (..dcd column)
...
4-400-8000119
4-400-8000120
4-400-8000121
4-400-8000122 <--row not joining
4-400-8000123
4-400-8000124
...
result of source2 (..tkt num column)
...
4-400-1000118
4-400-1000119
4-400-1000120
4-400-1000121
4-400-1000122 <--row not joining
4-400-1000123
4-400-1000124
4-400-1000125
...
All other rows are joining as expected.
Why is it failing for this one row?
View 1 Replies
View Related
Apr 14, 2015
I'm having trouble with a multi-table JOIN statement with more than one JOIN statement.
For each order, I need to return the following: CarsID, CarModelName, MakeID, OrderDate, ProductName, Total ordered the Car Category.
The carid (primary key) and carmodelname belong to the Cars table.
The makeid and orderdate belong to the OrderDetails table.
The productname and carcategory belong to the Product table.
The number of rows returned should be the same as the number of rows in OrderDetails.
View 2 Replies
View Related
Aug 9, 2013
Why would I use a left join instead of a inner join when the columns entered within the SELECT command determine what is displayed from the query results?
View 4 Replies
View Related
Jun 5, 2006
I have a merge join (full outer join) task in a data flow. The left input comes from a flat file source and then a script transformation which does some custom grouping. The right input comes from an oledb source. The script transformation output is asynchronous (SynchronousInputID=0). The left input has many more rows (200,000+) than the right input (2,500). I run it from VS 2005 by right-click/execute on the data flow task. The merge join remains yellow and the task never finishes. I do see a row count above the flat file destination that reaches a certain number and seems to get stuck there. When I test with a smaller file on the left it works OK. Any suggestions?
View 3 Replies
View Related
Jul 25, 2007
I'm using SQL Server 2005.
A piece of software I wrote starting timing out on a query that left outer joins a table to a view. Both the table and view have approximately the same number of rows (about 170000).
The table has 2 very similar columns, one is a varchar(1) and another is varchar(100). Neither are included in any index and beyond the size difference, the columns have the same properties. One of the employees here uses the varchar(1) column (called miscsearch) to tag large sets of rows to perform some action on. In this case, he had set 9000 rows miscsearch value to "g". The query then should join the table and view for all rows where miscsearch is set to g in the table. This query takes at least 20 minutes to run (I stopped it at this point).
If I remove the "where" clause and join all rows in the two tables, the query completes in about 20 seconds. If set the varchar(100) column (called descrip) to "g" for the same rows set via miscsearch, the query completes in about 20 seconds.
If I force the join type to a hash join, the query completes using miscsearch in about 30 seconds.
So, this works:
SELECT di.File_No, prevPlacements, balance,'NOT PLACED' as status FROM Info di LEFT OUTER HASH JOIN View_PP pp ON di.ram_file_no = pp.file_no WHERE miscsearch = 'g' ORDER BY balance DESC
and this works:
SELECT di.File_No, prevPlacements, balance,'NOT PLACED' as status FROM Info di LEFT OUTER JOIN View_PP pp ON di.ram_file_no = pp.file_no WHERE descrip = 'g' ORDER BY balance DESC
But this does't:
SELECT di.File_No, prevPlacements, balance,'NOT PLACED' as status FROM Info di LEFT OUTER JOIN View_PP pp ON di.ram_file_no = pp.file_no WHERE miscsearch = 'g' ORDER BY balance DESC
What should I be looking for here to understand why this is happening?
Thanks,
john
View 1 Replies
View Related
Apr 24, 2007
Awesome! I don't alway get the email notification of whoever reply to the posting. I think it only work after I log off of the forum.
Scott
View 2 Replies
View Related
Dec 24, 2013
We are trying to migrate from sql 2005 to 2012. I am changing one of the implicit join to explicit join. As soon as I change the join, the number of rows returned are fewer than before.
Below is my Implict join query
INSERT #RIF_TEMP1 (rf1_row_no,rf1_rif, rf1_key_id_no, rf1_last_date, rf1_start_date)
SELECT currow.rf0_row_no, currow.rf0_rif, currow.rf0_key_id_no, prevrow.rf0_start_date, currow.rf0_start_date
FROM #RIF_TEMP0 currow , #RIF_TEMP0 prevrow
[Code] ....
and below is explict join query
INSERT #RIF_TEMP1 (rf1_row_no,rf1_rif, rf1_key_id_no, rf1_last_date, rf1_start_date)
SELECT currow.rf0_row_no, currow.rf0_rif, currow.rf0_key_id_no, prevrow.rf0_start_date, currow.rf0_start_date
FROM #RIF_TEMP0 currow LEFT JOIN #RIF_TEMP0 prevrow
ON (currow.rf0_row_no = prevrow.rf0_row_no + 1)
[Code] ....
the count returned from both the queries is different.
I am not sure what am I doing wrong. The count of #RIF_TEMP0 is always 32, it never changes, but the variable @countTemp is different for both the queries.
View 7 Replies
View Related
Feb 5, 2015
Why does this right join return the same results as using a left (or even a full join)?There are 470 records in Account, and there are 1611 records in Contact. But any join returns 793 records.
select Contact.firstname, Contact.lastname, Account.[Account Name]
from Contact
right join Account
on Contact.[Account Name] = Account.[Account Name]
where Contact.[Account Name] = Account.[Account Name]
View 3 Replies
View Related
Aug 17, 2007
Hi guys,
I'll appreciate any help with the following problem:
I need to retrieve data from 3 tables. 2 master tables and 1 transaction table.
1. Master table TBLOC contain 2 records :
rcd 1. S01
rcd 2. S02
2. Master table TBCODE contain 5 records:
rcd 1. C1
rcd 2. C2
rcd 3. C3
rcd 4. C4
rcd 5. C5
3. Transaction table TBITEM contain 4 records which link to 2 master table:
rcd 1. S01, C1, CAR
rcd 2. S01, C4, TOY
rcd 3. S01, C5, KEY
rcd 4. S02, C2, CAR
I use Left Join & Right Join to retrieve result below (using non-ASNI method) but it doesn't work.
Right Join method:
SELECT C.LOC, B.CODE, A.ITEM FROM TBITEM A RIGHT JOIN TBCODE B ON A.CODE = B.CODE
RIGHT JOIN TBLOC C ON A.LOC = C.LOC
GROUP BY C.LOC, B.CODE, A.ITEM ORDER BY C.LOC, B.CODE
When I use Non-ASNI method it work:
SELECT C.LOC, B.CODE, A.ITEM FROM TBITEM A, TBCODE B, TBLOC C
WHERE A.CODE =* B.CODE AND A.LOC =* C.LOC
GROUP BY C.LOC, B.CODE, A.ITEM ORDER BY C.LOC, B.CODE
Result:
LOC CODE ITEM
-----------------------------
S01 C1 NULL
S01 C2 NULL
S01 C3 CAR
S01 C4 TOY
S01 C5 KEY
S02 C1 NULL
S02 C2 CAR
S02 C3 NULL
S02 C4 NULL
S02 C5 NULL
Please Help.
Thanks.
View 3 Replies
View Related
Nov 7, 2006
Is there a way to do a super-table join ie two table join with no matching criteria? I am pulling in a sheet from XL and joining to a table in SQLServer. The join should read something like €œfor every row in the sheet I need that row and a code from a table. 100 rows in the sheet merged with 10 codes from the table = 1000 result rows.
This is the simple sql (no join on the tables):
select 1.code, 2.rowdetail
from tblcodes 1, tblelements 2
But how to do this in SSIS?
Thanks - Ken
View 2 Replies
View Related
May 6, 2008
I read that merge joins work a lot faster than hash joins. How would you convert a hash join into a merge join? (Referring to output on Execution Plan diagrams.)
THANKS
View 3 Replies
View Related
Jun 23, 2006
In a recent post, I've read that Jet Provider is only provided with 32-bit.
I wonder, is there any problem if you run a SSIS package 32-bit which read from Access and then call another SSIS package 64 bit?? We've got quite 2000 dts which pulling data from MDB and within a time it'll disappear in favour 2005 environment .
Another question, what sort of Providers don't offer us 64-bit versions???
Any link or thought will be as usual welcomed
View 4 Replies
View Related
Apr 17, 2007
There is a table called "tblvZipCodes" that contain a zipcode of all cities, area code that are located in that zip code.
The problem I have with the inner join is that there are more than 1 cities in one zipcode code. Is there a way to just return only the 1st row and not return the rest of the rows from the tblvZipCodes in the INNER JOIN query?
Thanks..
Code:
SELECT TOP 100 PERCENT dbo.tblPurchaseRaw.Year, dbo.tblPurchaseRaw.Make, dbo.tblPurchaseRaw.Model, dbo.tblPurchaseRaw.ModelType,
dbo.tblPurchaseRaw.Color, dbo.tblvZipCodes.ZIPCode, dbo.tblvZipCodes.City, dbo.tblvZipCodes.County, dbo.tblvZipCodes.State,
dbo.tblvZipCodes.AreaCode, dbo.tblvZipCodes.Region, dbo.tblaAccounts.Name, dbo.tblaAccounts.PhoneOne, dbo.tblaAccounts.AccountID,
dbo.tblPurchaseRaw.AcceptedID, dbo.tblPurchaseRaw.Series, dbo.tblPurchaseRaw.BodyStyle, dbo.tblaAccounts.WebSite,
dbo.tblaAccounts.SalesEmail, dbo.tblPurchaseRaw.EmailTo, dbo.tblPurchaseRaw.PhotoURL, dbo.tblPurchaseRaw.Mileage,
dbo.tblPurchaseRaw.RawID, dbo.tblvRegions.Name AS RegionName, dbo.tblPurchaseRaw.VIN, dbo.tblPurchaseRaw.Style,
dbo.tblPurchaseRaw.StockDate
FROM dbo.tblPurchaseRaw INNER JOIN
dbo.tblaAccounts ON dbo.tblPurchaseRaw.AccountID = dbo.tblaAccounts.AccountID INNER JOIN
dbo.tblvZipCodes ON dbo.tblPurchaseRaw.ZipCode = dbo.tblvZipCodes.ZIPCode INNER JOIN
dbo.tblvRegions ON dbo.tblvZipCodes.Region = dbo.tblvRegions.RegionID
WHERE (CONVERT(char, dbo.tblPurchaseRaw.StockDate, 101) <> '01/01/1900') AND (dbo.tblPurchaseRaw.SoldRawID IS NULL) AND
(dbo.tblPurchaseRaw.AcceptedID <> - 10) AND (dbo.tblPurchaseRaw.AcceptedID <> - 1)
ORDER BY dbo.tblvZipCodes.ZIPCode
View 14 Replies
View Related
Mar 1, 2008
hello, i am running mysql server 5 and i have sql syntax like this:
select
sales.customerid as cid,
name,
count(saleid)
from
sales
inner join
customers
on
customers.customerid=sales.customerid
group by
sales.customerid
order by
sales.customerid;
it works fine and speedy. but when i change inner join to right join, in order to get all customers even there is no sale, my server locks up. note: there is about 10000 customers and 15000 sales.
what can be the problem?
thanks,
View 10 Replies
View Related
Jan 2, 2006
I have 2 tables, I will add sample data to them to help me explain...Table1(Fields: A, B)=====1,One2,Two3,ThreeTable2(Fields: A,B)=====2,deux9,neufI want to create a query that will only return data so long as the key(Field A) is on both tables, if not, return nothing. How can I dothis? I am thnking about using a 'JOIN' but not sure how to implementit...i.e: 2 would return data- but 9 would not...any help would be appreciated.
View 3 Replies
View Related
May 20, 2006
Hi,Just curious. Would you use ANSI style table joining or the 'oldfashion' table joining; especially if performance is the main concern?What I meant is illustrated below:ANSI Styleselect * from a join b on a.id = b.idOld Styleselect * from a, b where a.id = b.idI noticed that in some SQL, the ANSI is much faster but sometimes, theold style looks much better.It's ridiculous to try out both styles to see which is better wheneverwe want to write an SQL statement.Please comment.Thanks in advance.
View 1 Replies
View Related
Jun 28, 2007
Hello, everyoneI have one question about the standard join and inner join, which oneis faster and more reliable? Can you recommend me to use? Please,explain me...ThanksChamnap
View 12 Replies
View Related
Oct 10, 2007
Given a table of building components e.g. floors, walls, etc, etc:
create table component_multiplier_table
(
system_code char(4),
system_component_code char(3),
function_code char(4),
component_multiplier dec(7,6)
)
Where function_code is the function of the area e.g. Auditorium, Classrom, etc, etc. And not all components are available for all functions e.g. Carpeting is available for Classrooms but not Power Plants or Warehouses.
I need to self join the above table to itself on system_code and system_component_code and find out which rows are missing from each side.
A query that I've been banging away at with no success is:
SELECT c1.*, c2.*
FROM [dbo].[component_multiplier_table] c1 FULL OUTER JOIN [dbo].[component_multiplier_table] c2
ON (c1.system_component_code = c2.system_component_code) AND (c1.[system_code] = c2.[system_code])
WHERE c1.function_code = '2120' AND c2.[function_code] = '2750' AND (c1.[system_code] IS NULL OR c2.system_code IS NULL);
I added the is null conditions, no joy. I've tried every flavor of outer join w/o success.
Could any T-SQL gurus out there help me figure out how to do this in a set before I start coding
DECLARE crsr CURSOR
Thanks.
View 7 Replies
View Related
Jan 31, 2008
ok, following up on my previous post that I marked as answered a little premature. The query below works fine in sql studio:
SELECT id, CONVERT(NVARCHAR(10), arrdate,101) as formatedDate
FROM guest
but when I try to use it in a c# code behind file:
comm = new SqlCommand("SELECT id, CONVERT(NVARCHAR(10), arrdate,101) as formatedDate FROM guest WHERE id = @id", conn);
it bombs??
View 5 Replies
View Related