Insert Into Statement From Excel File
May 16, 2006
Hi all.
I am having trouble with an insert statement involving an excel file.
Insert into tpa00175 (intJobKey,BusinessFormKey,chrCustPONumber,chrExem ptNo,chrJobDescription1, chrJobName,
chrJobNumber,chrNxtVariationNum,chrUserDef1,chrUse rDef2,hrUserDef3,chrUserDef4,chrUserDef5,chrUserDe f6,chrUserDef7,
chrUserDef8,chrUserDef9,chrUserDef10,chrUserDef11, chrUserDef12,chrUserDef13,CompanyID,CustKey,dteCmp ltnDueDate,
dteCompletionDate,dteJobCommencement,dteReviewDate ,intClientContctKey,intDivisionKey,intEmployeeKey, intJobClassKey,
intMasterJobKey,MSTaxClassKey,numActualVarCosts,nu mActualVarSales,numCostsRecognized,numCreditLimit, numJobBudget,
numJTDActualCost,numJTDActualSale,numJTDCommitedCs ts,numJTDEstimatedCst,numJTDEstimatedSal,numLaborA ctual,
numLaborEstimate,numLaborForcast,numLastForcastCos t,numLastForcastSale,numMaterialActual,numMaterial Est,
numMaterialForcast,numOverHeadActual,numOverHeadEs t,numOverHeadForcast,numPercentComplete,numRetenti onAmtTTD,
numRetainageAmt,numRetentionBldTTD,numRetainagePrc nt,numSalesRecognized,numUser1ActlClass,numUser1Es tClass,
numUser1FrcstClass,numUser2ActlClass,numUser2EstCl ass,numUser2FrcstClass,numUser3ActlClass,numUser3E stClass,
numUser3FrcstClass,OpenOrClosed,PostIMGL,Retention AcctKey,siInvoiceLayout,siJobStatus,siJobType,siMa rginType,
siProfitRecMethod,siRetainageType,STaxClassKey,tiP rofRecByJobLine,TranID,UpdateCounter,WhseKey)
FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0','Excel 8.0;Database=C:Book1.xls;HDR=YES',
'SELECT * FROM [Sheet1$]')
its a long one for sure. 2 questions.
1)Is there a way to just say insert all rather than naming each row like the above example.
2)With this above example i am getting a syntax error near 'From'. What am I missing??
Thanks alot.
Tibor
View 10 Replies
ADVERTISEMENT
Sep 17, 2015
I have a raw excel file which I am trying to create an automated insert into a DB.
Data in excel file is two columns, Row_Data, Row_ID
I am trying to split rows and store them in columns in a table.
Row_ID column is simply row identifier column
E.g.:
Row_Data Row ID
Frank 2
Seattle 3
WA 4
34 5
1010.00 6
How can i insert this data into a table where i`ll have columns of Name, City, State, Age and Amount?
View 18 Replies
View Related
Jun 1, 2007
Can an excel file be used as a source for a Bulk Insert Task in SSIS instead of a delimited flat file?
View 6 Replies
View Related
Jul 9, 2015
I have an Excel file with .csv extension . it has on sheet with name Sheet1.
Now, I'm trying to insert this Excel data into one #temp table. I tried with syntax:
----------------
Exec sp_configure 'show advanced options', 1;
RECONFIGURE;
GO
Exec sp_configure 'Ad Hoc Distributed Queries', 1;
RECONFIGURE;
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'AllowInProcess' , 1;
[Code] ...
But, I'm getting error:
The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "(null)" reported an error. The provider did not give any information about the error.
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "(null)".
If I'm executing for .xls file this statement is working finr and rows are inserted into #temp table. How to take excel file of .csv extension??
View 3 Replies
View Related
Feb 14, 2008
question 1:
i found that database log file can contain more records after performing backup database statement.
for example:
i create a database and limit the log file to 2mb. then i create a table and insert data.
If i backup the database before i insert data , the database file can contain 192 records unitl the log file is full.
If i don't perform the 'backup database' statement.
The 'dbcc sqlperf(logspace)' indicate the utilization ratio is less than 40% after inserting 192 records
why?
I list my code:
Code Snippet
create database db_test
on primary
(
name=db_test,
filename='C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDatadb_test.mdf'
)
log on
(
name=db_test_log,
filename='C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDatadb_test_log.ldf',
maxsize=2mb
)
go
backup database db_test to disk='db_test.bak' --- if i don't execute this line, log file can contain a lot of record
go
create table db_test..table1(col char(8000))
--insert data to fill up the database log
declare @n int
set @n=0
while @n<192
begin
insert into db_test..table1 values(replicate('a',8000))
set @n=@n+1
end
question 2:
i create a database and limit the log file to 2mb. Then i create a table and insert data in an endless loop.
After the inserting operation executing for a while, the 9002 error occurs, indicate the log file for the database is full.
But the 'dbcc sqlperf(logspace)' command indicate the unilization ratio is low, and log_reuse_wait_desc in sys.database is 'CHECKPOINT'
And I can insert data , and i'm sure the state of log_use_wait_desc is 'CHECKPOINT'.
As i known, the checkpoint can't truncate log under full recovery model. Only the back log operation can truncate the transaction log.
So log is not full, why 9002 error is encounterd. and why the log_reuse_wait_desc return 'CHECKPOINT'?
I list my code:
Code Snippet
create database db_test
on primary
(
name=db_test,
filename='C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDatadb_test.mdf'
)
log on
(
name=db_test_log,
filename='C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDatadb_test_log.ldf',
maxsize=2mb
)
go
create table db_test..table1(col char(8000))
--insert data to fill up the database log
declare @n int
set @n=0
while @n<>-1
begin
insert into db_test..table1 values(replicate('a',8000))
end
any suggestions?
thanks in advance.
View 5 Replies
View Related
Jul 20, 2006
I have the Excel Connection Manager and Source to read the contents from an Excel file. For some reason couple of numeric fields from the Excel worksheet are brought over as nulls even though they have a value of 300 and 150. I am not sure why this is happening. I looked into the format of the fields and they are set to General in Excel, I tried setting them to numeric and that did not help.
All the other content from the excel file is coming thru except for the 2 numeric fields.
I tried to bring the contents from the excel source to a text file in csv format and for some reason the 2 numeric fields came out as blank.
Any inputs on getting this addressed will be much appreciated.
Thanks,
Manisha
View 5 Replies
View Related
Apr 3, 2015
I am unable to load data from flat file to sql table using bulk insert sql statement
My code:-
DECLARE @filePath VARCHAR(200)
DECLARE @sql VARCHAR(8000)
Declare @filename varchar(100)
set @filename='CCNVZ_150401054418'
SET @filePath = 'I:IncomingFiles'+@FileName+'.txt'
[Code] .....
View 1 Replies
View Related
Jul 14, 2015
Is there anyway to send excel file from ssis using send mail task without saving the excel file locally. I need to automate the process which involves loading the excel file from the database and send it to some people.
View 6 Replies
View Related
Jul 25, 2015
Trying to upload excel in server where excel is not installed. BIDs was there in the server, when i am trying to craete Excel source I am not able.what the workround for this.. How to upload excel without excel installed on the server.
View 4 Replies
View Related
Nov 19, 2007
I am using a Excel Source to get the data from an excel file to sql server 2005 table. A couple columns are coming in a double precision float, but some values have characters in them, but those values are coming out as null, even though I changed the datatype from float to unicode string. Any inputs on resolving this will be much appreciated.
Thanks,
Manisha
View 4 Replies
View Related
Sep 13, 2015
We have 10 sheets in Excel File and 10 sheet contains errror data. How to load 9 sheets data in to 1 destination and error data in to other destination?
View 4 Replies
View Related
Dec 18, 2006
i have an SSIS package that exports to an excel file. This works fine. the problem is that it appends the data instead of overwriting the file. Is there any way to overwrite the file like you can with a flat file? I have to email the file everyweek and don't want to have to clear it out manually. Any help would be appreciated
View 2 Replies
View Related
Nov 5, 2015
I've have a need with SQL Server 2005 (so I've no MERGE statement), I have to merge 2 tables, the target table has 10 fields, the first 4 are the clustered index and primary key, the source table has the same fields and index.Since I can't use the MERGE statement (I'm in SQL 2005) I have to make a double step operation, and INSERT and an UPDATE, I can't figure how to design the WHERE condition for the insert statement.
View 2 Replies
View Related
Apr 21, 2008
An insert statement was not inserting all the data into a table. Found it very strange as the other fields in the row were inserted. I ran SQL profiler and found that sql statement had all the fields in the insert statement but some of the fields were not inserted. Below is the sql statement which is created dyanmically by a asp.net C# class. The columns which are not inserted are 'totaltax' and 'totalamount' ...while the 'shipto_name' etc...were inserted.there were not errors thrown. The sql from the code cannot be shown here as it is dynamically built referencing C# class files.It works fine on another test database which uses the same dlls. The only difference i found was the difference in date formats..@totalamount=1625.62,@totaltax=125.62are not inserted into the database.Below is the statement copied from SQL profiler.exec sp_executesql N'INSERT INTO salesorder(billto_city, billto_country, billto_line1, billto_line2, billto_name,billto_postalcode, billto_stateorprovince, billto_telephone, contactid, CreatedOn, customerid, customeridtype,DeletionStateCode, discountamount, discountpercentage, ModifiedOn, name, ordernumber,pricelevelid, salesorderId, shipto_city, shipto_country,shipto_line1, shipto_line2, shipto_name, shipto_postalcode, shipto_stateorprovince,shipto_telephone, StateCode, submitdate, totalamount,totallineitemamount, totaltax ) VALUES(@billto_city, @billto_country, @billto_line1, @billto_line2,@billto_name, @billto_postalcode, @billto_stateorprovince, @billto_telephone, @contactid, @CreatedOn, @customerid,@customeridtype, @DeletionStateCode, @discountamount,@discountpercentage, @ModifiedOn, @name, @ordernumber, @pricelevelid, @salesorderId,@shipto_city, @shipto_country, @shipto_line1, @shipto_line2,@shipto_name, @shipto_postalcode, @shipto_stateorprovince, @shipto_telephone,@StateCode, @submitdate, @totalamount, @totallineitemamount, @totaltax)',N'@billto_city nvarchar(8),@billto_country nvarchar(13),@billto_line1 nvarchar(3),@billto_line2 nvarchar(4),@billto_name nvarchar(15),@billto_postalcode nvarchar(5),@billto_stateorprovince nvarchar(8),@billto_telephone nvarchar(3),@contactid uniqueidentifier,@CreatedOn datetime,@customerid uniqueidentifier,@customeridtype int,@DeletionStateCode int,@discountamount decimal(1,0),@discountpercentage decimal(1,0),@ModifiedOn datetime,@name nvarchar(33),@ordernumber nvarchar(18),@pricelevelid uniqueidentifier,@salesorderId uniqueidentifier,@shipto_city nvarchar(8),@shipto_country nvarchar(13),@shipto_line1 nvarchar(3),@shipto_line2 nvarchar(4),@shipto_name nvarchar(15),@shipto_postalcode nvarchar(5),@shipto_stateorprovince nvarchar(8),@shipto_telephone nvarchar(3),@StateCode int,@submitdate datetime,@totalamount decimal(6,2),@totallineitemamount decimal(6,2),@totaltax decimal(5,2)',@billto_city=N'New York',@billto_country=N'United States',@billto_line1=N'454',@billto_line2=N'Road',@billto_name=N'Hillary Clinton',@billto_postalcode=N'10001',@billto_stateorprovince=N'New York',@billto_telephone=N'124',@contactid='8DAFE298-3A25-42EE-B208-0B79DE653B61',@CreatedOn=''2008-04-18 13:37:12:013'',@customerid='8DAFE298-3A25-42EE-B208-0B79DE653B61',@customeridtype=2,@DeletionStateCode=0,@discountamount=0,@discountpercentage=0,@ModifiedOn=''2008-04-18 13:37:12:013'',@name=N'E-Commerce Order (Before billing)',@ordernumber=N'BRKV-CC-OKRW5764YS',@pricelevelid='B74DB28B-AA8F-DC11-B289-000423B63B71',@salesorderId='9CD0E11A-5A6D-4584-BC3E-4292EBA6ED24',@shipto_city=N'New York',@shipto_country=N'United States',@shipto_line1=N'454',@shipto_line2=N'Road',@shipto_name=N'Hillary Clinton',@shipto_postalcode=N'10001',@shipto_stateorprovince=N'New York',@shipto_telephone=N'124',@StateCode=0,@submitdate=''2008-04-18 14:37:10:140'',@totalamount=1625.62,@totallineitemamount=1500.00,@totaltax=125.62
thanks
View 7 Replies
View Related
Apr 9, 2007
Hello
I have a problem with setting relations properly when inserting data using adonet. Already have searched for a solutions, still not finding a mistake...
Here's the sql management studio diagram :
and here goes the code1 DataSet ds = new DataSet();
2
3 SqlDataAdapter myCommand1 = new SqlDataAdapter("select * from SurveyTemplate", myConnection);
4 SqlCommandBuilder cb = new SqlCommandBuilder(myCommand1);
5 myCommand1.FillSchema(ds, SchemaType.Source);
6 DataTable pTable = ds.Tables["Table"];
7 pTable.TableName = "SurveyTemplate";
8 myCommand1.InsertCommand = cb.GetInsertCommand();
9 myCommand1.InsertCommand.Connection = myConnection;
10
11 SqlDataAdapter myCommand2 = new SqlDataAdapter("select * from Question", myConnection);
12 cb = new SqlCommandBuilder(myCommand2);
13 myCommand2.FillSchema(ds, SchemaType.Source);
14 pTable = ds.Tables["Table"];
15 pTable.TableName = "Question";
16 myCommand2.InsertCommand = cb.GetInsertCommand();
17 myCommand2.InsertCommand.Connection = myConnection;
18
19 SqlDataAdapter myCommand3 = new SqlDataAdapter("select * from Possible_Answer", myConnection);
20 cb = new SqlCommandBuilder(myCommand3);
21 myCommand3.FillSchema(ds, SchemaType.Source);
22 pTable = ds.Tables["Table"];
23 pTable.TableName = "Possible_Answer";
24 myCommand3.InsertCommand = cb.GetInsertCommand();
25 myCommand3.InsertCommand.Connection = myConnection;
26
27 ds.Relations.Add(new DataRelation("FK_Question_SurveyTemplate", ds.Tables["SurveyTemplate"].Columns["id"], ds.Tables["Question"].Columns["surveyTemplateID"]));
28 ds.Relations.Add(new DataRelation("FK_Possible_Answer_Question", ds.Tables["Question"].Columns["id"], ds.Tables["Possible_Answer"].Columns["questionID"]));
29
30 DataRow dr = ds.Tables["SurveyTemplate"].NewRow();
31 dr["name"] = o[0];
32 dr["description"] = o[1];
33 dr["active"] = 1;
34 ds.Tables["SurveyTemplate"].Rows.Add(dr);
35
36 DataRow dr1 = ds.Tables["Question"].NewRow();
37 dr1["questionIndex"] = 1;
38 dr1["questionContent"] = "q1";
39 dr1.SetParentRow(dr);
40 ds.Tables["Question"].Rows.Add(dr1);
41
42 DataRow dr2 = ds.Tables["Possible_Answer"].NewRow();
43 dr2["answerIndex"] = 1;
44 dr2["answerContent"] = "a11";
45 dr2.SetParentRow(dr1);
46 ds.Tables["Possible_Answer"].Rows.Add(dr2);
47
48 dr1 = ds.Tables["Question"].NewRow();
49 dr1["questionIndex"] = 2;
50 dr1["questionContent"] = "q2";
51 dr1.SetParentRow(dr);
52 ds.Tables["Question"].Rows.Add(dr1);
53
54 dr2 = ds.Tables["Possible_Answer"].NewRow();
55 dr2["answerIndex"] = 1;
56 dr2["answerContent"] = "a21";
57 dr2.SetParentRow(dr1);
58 ds.Tables["Possible_Answer"].Rows.Add(dr2);
59
60 dr2 = ds.Tables["Possible_Answer"].NewRow();
61 dr2["answerIndex"] = 2;
62 dr2["answerContent"] = "a22";
63 dr2.SetParentRow(dr1);
64 ds.Tables["Possible_Answer"].Rows.Add(dr2);
65
66 myCommand1.Update(ds,"SurveyTemplate");
67 myCommand2.Update(ds, "Question");
68 myCommand3.Update(ds, "Possible_Answer");
69 ds.AcceptChanges();
70
and that causes (at line 67):"The INSERT statement conflicted with the FOREIGN KEY constraint
"FK_Question_SurveyTemplate". The conflict occurred in database
"ankietyzacja", table "dbo.SurveyTemplate", column
'id'.
The statement has been terminated.
at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.Update(DataSet dataSet, String srcTable)
at AnkietyzacjaWebService.Service1.createSurveyTemplate(Object[] o) in J:\PL\PAI\AnkietyzacjaWebService\AnkietyzacjaWebServicece\Service1.asmx.cs:line 397"
Could You please tell me what am I missing here ?
Thanks a lot.
View 5 Replies
View Related
Jan 14, 2008
This problem is being seen on SQL 2005 SP2 + cumulative update 4
I am currently successfully using the output clause of an insert statement to return the identity values for inserted rows into a table variable
I now need to add an "instead of insert" trigger to the table that is the subject of the insert.
As soon as I add the "instead of insert" trigger, the output clause on the insert statement does not return any data - although the insert completes successfully. As a result I am not able to obtain the identities of the inserted rows
Note that @@identity would return the correct value in the test repro below - but this is not a viable option as the table in question will be merge replicated and @@identity will return the identity value of a replication metadata table rather than the identity of the row inserted into my_table
Note also that in the test repro, the "instead of insert" trigger actually does nothing apart from the default insert, but the real world trigger has additional code.
To run the repro below - select each of the sections below in turn and execute them
1) Create the table
2) Create the trigger
3) Do the insert - note that table variable contains a row with column value zero - it should contain the @@identity value
4) Drop the trigger
5) Re-run the insert from 3) - note that table variable is now correctly populated with the @@identity value in the row
I need the behaviour to be correct when the trigger is present
Any thoughts would be much appreciated
aero1
/************************************************
1) - Create the table
************************************************/
CREATE TABLE [dbo].[my_table](
[my_table_id] [bigint] IDENTITY(1,1) NOT NULL,
[forename] [varchar](100) NULL,
[surname] [varchar](50) NULL,
CONSTRAINT [pk_my_table] PRIMARY KEY NONCLUSTERED
(
[my_table_id] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF, FILLFACTOR = 70) ON [PRIMARY]
)
GO
/************************************************
2) - Create the trigger
************************************************/
CREATE TRIGGER [dbo].[trig_my_table__instead_insert] ON [dbo].[my_table]
INSTEAD OF INSERT
AS
BEGIN
INSERT INTO my_table
(
forename,
surname)
SELECT
forename,
surname
FROM inserted
END
/************************************************
3) - Do the insert
************************************************/
DECLARE @my_insert TABLE( my_table_id bigint )
declare @forename VARCHAR(100)
declare @surname VARCHAR(50)
set @forename = N'john'
set @surname = N'smith'
INSERT INTO my_table (
forename
, surname
)
OUTPUT inserted.my_table_id INTO @my_insert
VALUES( @forename
, @surname
)
select @@identity -- expect this value in @my_insert table
select * from @my_insert -- OK value without trigger - zero with trigger
/************************************************
4) - Drop the trigger
************************************************/
drop trigger [dbo].[trig_my_table__instead_insert]
go
/************************************************
5) - Re-run insert from 3)
************************************************/
-- @my_insert now contains row expected with identity of inserted row
-- i.e. OK
View 5 Replies
View Related
Sep 25, 2006
Good Day to all,
Hope you could help me w/ my project.
Im creating a DTS Package. The source data will be coming from an excel file going to my SQL table. The DTS package is scheduled to execute daily, but the source data will be coming from different excel filename.
Example, today the DTS will get data from Data092506.xls. Then tomorrow, the data will be coming from Data092606.xls.
How can I do this? The DTS I've already done has a fixed source data file.
Please help.
Thank you so much.
God Bless.
View 9 Replies
View Related
May 26, 2006
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
View 10 Replies
View Related
Oct 20, 2014
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
View 1 Replies
View Related
Aug 26, 2015
I have a ssis package where I need to have excel destination. In the Excel file, I need to have few rows with some text and then populate data below the text. One the text is like this:
Data as of: 08/25/2015
if the report ran today, then Data as of will have Yesterday. So, if the user opens that excel file after a week, then user should see same Data as of: 08/25/2015. not today()-day(1).
I was planing to handle on excel side with today()-day(1). but it only works the day it was run. Then the excel file is open after few days later, then it might as Data as of: 08/30/2015 which is not true. It should still stay Data as of:
08/25/2015 on what ever date the excel file is open. The SSIS package runs only once.
How do I handle this so that whenever user open the file, they will see Data as of: 08/25/2015. This is not a column in excel. It is like a description of data in excel.
View 3 Replies
View Related
Dec 28, 2007
hi all;
1. Excel file Source--> monthly Revenue details
2. Derived Colum Transoformations
3. Oledb Destination
its my flow in one of my packates (ETL job)
Excel file contains monthly revenue details, i wanna import the excel data to my database staging table, so i've created the package.
its working fine...
Problem
if we change the new data for the next month and running the package its not running;
the same file, same format, only we delete the contents, of the file except first row of the excel sheet,
and pasting the new data;
new data is coming from Oracle DataBase in the form of excel sheet ( manually they will copy the data and sending to us)
i open that package in design mode and while double clicking the excel file source it says <column name>'s Meta Data needs to be synchronized
Do you want to Fix this issue automatically with the available external column's meta data
Clearly noted that its a data type issue; i have changed the corresponding data types as it is in the previous Excel sheet which is equivalant to the Table its copying to.
now the package is running with validation warnings, External Column "Invoice Amount" needs to be updated...etc. some 2 or three warning messages i can able to see in the package Execution wizard,
ok, i'm ready to accept these warnings, and i want my package running from my server;( packages had been deployed in to the Centeralized server; every time if we want to run the package, we have the asp.net webpage, that is executing the package in an On_click event)
The package is not running from the server, its due to the meta data change in the Excel file( i guess)
please suggest me some guide lines to resolve this meta data issue, i want my excel sheet meta data should not change when we have new updates in it;
otherwise suggest me some solutions that i can validate the excel sheet before running the package and testing whether the data is in correct format or not? its a kind of Data Profiling activity;
i know its some what crazy, but i need to maintain the system with permanent solution, instead of facing this meta data mismatch issue!!!
some what lenthy explanation--> its needed for my dear powerful microsoft responders. i think i 've explained my problem clearly, if i don't let me know your queries, i'll try my level best.
View 3 Replies
View Related
Jan 3, 2007
Dear all,
I am deploying programatically an Excel 2007 file to a SQL Server 2005 Reporting Server. The problem is that if a file with the same name already exists, that file isn't replaced. I would like the opposite to happen. I'm using the following code:
--Executable
set svr=http://w3sdwsqld1/reportserver
set src_fld="\w3sdwsqld1\deploy\SAD\ECRANS\UPDATES_20061127_190000\Ecrans\AM\Associados\"
set dest_fld="Associados"
set script="\w3sdwsqld1\deploy\SADECRANS\UPDATES_20061127_190000\Ecrans\AM\Associados\PublishReports.rss"
REM Sample: deploy.bat http://w3sdwsqld1/reportserver "\w3sdwsqld1\deploy\SAD\ECRANS\UPDATES_20061127_190000\Ecrans\AM\Associados\" "Associados" "\w3sdwsqld1\deploy\SADECRANS\UPDATES_20061127_190000\Ecrans\AM\Associados\PublishReports.rss"
for /R %src_fld% %%f in (*.xlsx) do rs -i %script% -s %svr% -v ParentFolder=%dest_fld% -v reportP="%%~nf" -v path=%src_fld%
PAUSE
--rss Code
'
' Script Variables
'
' Variables that are passed on the command line with the -v switch:
'
' (a) parentFolder - corresponds to the folder that the script creates and uses
' to contain your published reports
' (b) reportP - corresponds to the report to publish
Dim ROOT As String = "/SAD/Ecrans/Ecrans/AM"
Dim definition As [Byte]() = Nothing
Dim warnings As Warning() = Nothing
Dim parentPath As String = ROOT + "/"+ parentFolder
Dim filePath As String = path
Dim report As String = reportP
Public Sub Main()
rs.Credentials = System.Net.CredentialCache.DefaultCredentials
'Create the parent folder
Try
rs.CreateFolder(parentFolder, ROOT,Nothing)
Console.WriteLine("Parent folder {0} created successfully", parentFolder)
Catch e As Exception
Console.WriteLine(e.Message)
End Try
'Create shared data source
'CreateSampleDataSource("Solucao_Integrada", "OLEDB-MD", "Data Source=dwareas1;Initial Catalog=SAD_Solucao_Integrada")
'Publish the sample reports
PublishReport(report)
End Sub
Public Sub CreateSampleDataSource(name As String, extension As String, connectionString As String)
'Define the data source definition.
Dim definition As New DataSourceDefinition()
definition.CredentialRetrieval = CredentialRetrievalEnum.Integrated
definition.ConnectString = connectionString
definition.Enabled = True
definition.EnabledSpecified = True
definition.Extension = extension
definition.ImpersonateUser = False
definition.ImpersonateUserSpecified = True
'Use the default prompt string.
definition.Prompt = Nothing
definition.WindowsCredentials = False
Try
rs.CreateDataSource(name, parentPath, False, definition, Nothing)
Console.WriteLine("Data source {0} created successfully", name)
Catch e As Exception
Console.WriteLine(e.Message)
End Try
End Sub
Public Sub PublishReport(ByVal reportName As String)
Try
Dim stream As FileStream = File.OpenRead(filePath + reportName + ".xlsx")
Console.WriteLine(reportName)
definition = New [Byte](stream.Length) {}
stream.Read(definition, 0, CInt(stream.Length))
stream.Close()
Catch e As IOException
Console.WriteLine(e.Message)
End Try
Try
rs.CreateResource(reportName + ".xlsx", parentPath, True, definition, "application/x-excel", Nothing)
Catch e As Exception
Console.WriteLine(e.Message)
Console.WriteLine("Failed to publish report")
End Try
End Sub
--------------------------------------------------------------------------------------------------------------------
Any thoughts? Many thanks,
Pedro Martins
Portugal
View 3 Replies
View Related
Aug 2, 2007
I hope someone can help me with this - I started receiving this error message in the past month or so when I open a csv report and save it as an Excel file in a folder I use on my VPN and in My Documents. It does not show up when I save it to my Desk Top.
I have Microsoft Office Student and Teacher and Office XP Professional installed on my notebook. I tried to uninstall Office XP and it would not let me. Something about a "patch could not be opened......"
The error message is as follows:
Header: .NET-BroadcastEventWindow.2.0.0.0.33c0d.0.EXCEL.EXE-Application Error
Excel error message The instruction at 0x0beab865 referenced memory at "0x00000008"
The memory could not be "read".
Click ok to terminate the program.
I hope someone could please help me with this I received 60 - 80 csv files a week and everythime I save on I get this pop up message!
Thank you!
Leslie
View 1 Replies
View Related
Jul 20, 2005
I'm quite stuck with this:I have an import table called ReferenceMatchingImport which containsdata that has been sucked from a data submission. The contents ofthis table have to be imported into another table ExternalReferencewhich has various foreign keys.This is simple but one of these keys says that the value inExternalReference.CompanyRef must be in the CompanyReference table.Of course if this is an initial import then it will not be so as partof my script I must insert a new row into CompanyReference andpopulate ExternalReference.CompanyRef with the identity column of thistable.I thought a good idea would be to use an SP which inserts a new rowand returns @@Identity as the value to insert. However this doesn'twork as far as I can tell. Is there a approved way to perform thissort of opperation? My code is below.Thanks.ALTER PROCEDURE SP00ReferenceMatchingImportAS/*Just some integrity checking going on here*/INSERT ExternalReference(ExternalSourceRef,AssetGroupRef,CompanyUnitRef,EntityTypeCode,CompanyRef, --this is the unknown ref which is returned by the spExternalReferenceTypeCode,ExternalReferenceCompanyReferenceMapTypeCode,StartDate,EndDate,LastUpdateBy,LastUpdateDate)SELECT rmi.ExternalDataSourcePropertyRef,rmi.AssetGroup,rmi.CompanyUnit,rmi.EntityType,SP01InsertIPDReference rmi.EntityType, --here I'm trying to run thesp so that I can use the return value as the insert value1,1,GETDATE(),GETDATE(),'RefMatch',GETDATE()FROM ReferenceMatchingImport rmiWHERE rmi.ExternalDataSourcePropertyRef NOT IN (SELECT ExternalSourceRefFROM ExternalReference)
View 3 Replies
View Related
Oct 12, 2007
Hi,
i have a file which consists data as below,
3
123||
456||
789||
Iam reading file using bulk insert and iam inserting these phone numbers into table having one column as below.
BULK INSERT TABLE_NAME FROM 'FILE_PATH'
WITH (KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '||')
but i want to insert the data into table having two columns. if iam trying to insert the data into table having two columns its not inserting.
can anyone help me how to do this?
Thanks,
-Badri
View 5 Replies
View Related
Jul 21, 2015
I'm importing a multi tab spreadsheet using Import wizard, which I understand to use the same internals as SSIS. The total number of columns in the spread sheet will be over 500. The import wizard defaults everything to varchar 255. I understand there is an XML file I can manipulate to change this and they are located
C:Program FilesMicrosoft SQL Server100DTSMappingFiles
Assuming one of these will control Excel defaults, which one is it? None of the names lend themselves to the Excel as a source. SqlClientToMSSql10?
View 6 Replies
View Related
Dec 29, 2003
I am trying to help an individual with a MS Query.
In Excel 97 MS Query the script was written:
TO_CHAR(LABTRANS.STARTDATE, 'YYYY') AS YEAR
In Excel XP I can run an existing Query and it returns the data as expected, but when I view the query it is:
TO_CHAR(LABTRANS.STARTDATE, 'YYYY') AS 'YEAR'
However if I try to create a new query using XP MS Query then the AS YEAR or AS 'YEAR' will be removed by MS Query and my column header will now be:
TO_CHAR(LABTRANS.STARTDATE, 'YYYY')
Here are my examples:
MS Excel 97 Query
SELECT LABTRANS.LABORCODE, LABTRANS.REGULARHRS, LABTRANS.OTHRS, LABTRANS.OTSCALE, LABTRANS.STARTDATE, LABTRANS.TRANSTYPE, VALUELIST.VALDESC,
TO_CHAR(LABTRANS.STARTDATE, 'YYYY') AS 'YEAR'
FROM MAXIMO.LABTRANS LABTRANS, MAXIMO.VALUELIST VALUELIST
WHERE LABTRANS.TRANSTYPE = VALUELIST.VALUE
AND (LABTRANS.TRANSTYPE IN (SELECT VALUE FROM VALUELIST WHERE LISTNAME = 'LTTYPE' AND MAXVALUE = 'NON-WORK'))
AND LABTRANS.LABORCODE IN (SELECT LABORCODE FROM LABOR WHERE LABOR.TYPE = 'CUPE' AND LABOR.CREWID IS NOT NULL AND LABOR.LA9 = 'N' AND LABOR.LA16 = 'WW' OR LABORCODE = '210308') AND VALUELIST.MAXVALUE = 'NON-WORK' ORDER BY LABTRANS.STARTDATE
MS Excel XP Query
SELECT LABTRANS.LABORCODE, LABTRANS.REGULARHRS, LABTRANS.OTHRS, LABTRANS.OTSCALE, LABTRANS.STARTDATE, LABTRANS.TRANSTYPE, VALUELIST.VALDESC,
TO_CHAR(LABTRANS.STARTDATE, 'YYYY')
FROM MAXIMO.LABTRANS LABTRANS, MAXIMO.VALUELIST VALUELIST
WHERE LABTRANS.TRANSTYPE = VALUELIST.VALUE
AND (LABTRANS.TRANSTYPE IN (SELECT VALUE FROM VALUELIST WHERE LISTNAME = 'LTTYPE' AND MAXVALUE = 'NON-WORK'))
AND LABTRANS.LABORCODE IN (SELECT LABORCODE FROM LABOR WHERE LABOR.TYPE = 'CUPE' AND LABOR.CREWID IS NOT NULL AND LABOR.LA9 = 'N' AND LABOR.LA16 = 'WW' OR LABORCODE = '210308') AND VALUELIST.MAXVALUE = 'NON-WORK' ORDER BY LABTRANS.STARTDATE
In Excel XP, no matter what I put in the AS part of the statement when I execute the script it runs and removes the AS part from the statement. This only happens when I run the script from MS Query, if I stay in Excel and just refresh the data, then it works fine.
I did not have this problem in Excel 97.
Any suggestions?
View 2 Replies
View Related
Aug 12, 2015
I managed to run a single DMX query from Excel using Data Mining Extension Add-in, however, I need to run DMX statements in a loop teaching my models from different data sets. Therefore I need to run multiple custom DMX statements (I thought Excel + VBA would be the easiest way to do that). How do I use Data Mining Extension Add-in from VBA level? I cannot find relevant documentation for that purpose anywhere.I use SQL Server 2012, MS Excel 2013 and I can easily run MDX and SQL queries from Excel, but somehow DMX won't work.
View 5 Replies
View Related
Jan 2, 2008
Hey All,
Similar to a previous post (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=244646&SiteID=1), I am trying to import data into a SQL Table.
I am trying to program a small application that will import product data obtained through suppliers via CD-ROM. One supplier in particular uses Fixed width colums, and data looks like this:
Example of Data
0124015Apple Crate 32.12
0124016Bananna Box 12.56
0124017Mango Carton 15.98
0124018Seedless Watermelon 42.98
My Table would then have:
ProductID as int
Name as text
Cost as money
How would I go about extracting the data with an XML Format file? I am stumbling over how to tell it where to start picking up data for a specific column.
Is there any way that I could trim the Name column (i.e.: "Mango Carton " --> "Mango Carton")?
I don't know if it makes any difference, but I've been calling SQL from my code by doing this:
Code in C# Form
SqlConnection SqlConnection = new SqlConnection(global::SQLClients.Properties.Settings.Default.ClientPhonebookConnectionString);
SqlCommand cmd = new SqlCommand();
cmd.CommandType = CommandType.Text;
cmd.CommandText = "INSERT INTO PhonebookTable(Name, PhoneNumber) VALUES('" + txtName.Text.ToString() + "', '" + txtPhoneNumber.Text.ToString() + "')";
cmd.Connection = SqlConnection;
SqlConnection.Open();
cmd.ExecuteNonQuery();
SqlConnection.Close();
RefreshData();
I am running Visual Studio C# Express 2005 and SQL Server Express 2005.
Thanks for your time,
Hayden.
View 1 Replies
View Related
Oct 24, 2007
Hi all,
In a foreachloop, I am inserting records into a flat file which is working fine. But the thing is that as the file grows, it takes longer for it to locate the EOF(End of File) of the flat file so as to insert the records.
I have around 70-100 lines written to the file at each loop and there are more than 20k records to be looped. wihich means that at the end I should be having 1400k - 20000k line in the text file.
One solution would be to insert the records at the start of the file itself so that it does not has to lookup the EOF each time before writting.
Another would be to generate separate files and then merge it.
Any idea how can this can be done?
Beside this I have to zip the file and then SFTP to a given address.
Any suggestion or help would be welcome.
Rdgs
David
View 5 Replies
View Related
Sep 15, 2007
Hi there,
I have inherited a databse and am building a new website to go wiht it.
There is a file upload page which will upload images to a directory. I need to insert into the database retrieve the id just added then upload the image renaming it in the format locID(QueryString)_ImageID(retrieved from database).jpg
The page has a file upload control and a button.
I am trying to write my code behind so that when the button is clicked it inserts location id into the images table retrieves Image id. Renames the file and uploads it to the images folder.
II think i need to call the routine from another routine for the button click but the signatures are different, where am i going wrong? or for that matter have i been pissing into the wind for the last 4 hours?
CODE BEHIND
Imports System.Data
Imports System.Data.SqlClientPartial Class admin_Add_Images
Inherits System.Web.UI.PageProtected Sub UploadImage(ByVal Sender As Object, ByVal e As SqlDataSourceStatusEventArgs)
Dim LocationId As String = Request.QueryString(ID)
' create a new SqlConnectionDim NewConn As New SqlConnection
NewConn = New SqlConnection("server=desktopsqlexpress;uid=xxxxxx;pwd=xxxxxxx;database=MYLOCDEV") 'OleDbConnection i
' open the connection
NewConn.Open()Dim MyInsert = New SqlCommand("INSERT into image([LocationID]) VALUES (@LocationID); SET @NewId = Scope_Identity()")
NewConn.Close()
If Not File1.PostedFile Is Nothing And File1.PostedFile.ContentLength > 0 Then
'RENAME THE FILEDim newid As Integer = e.Command.Parameters("@NewId").Value
Dim fn As String = (LocationId & "_" & newid & ".jpg")Dim SaveLocation As String = Server.MapPath("oicImages") & "" & fn
Try
File1.PostedFile.SaveAs(SaveLocation)Response.Write("The file has been uploaded.")
Catch Exc As ExceptionResponse.Write("Error: " & Exc.Message)
End Try
ElseResponse.Write("Please select a file to upload.")
End If
End SubProtected Sub Submit1_Click(ByVal Sender As Object, ByVal e As System.EventArgs) Handles Submit1.Click
UploadImage()End Sub
End Class
View 2 Replies
View Related
Mar 29, 2006
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
View 6 Replies
View Related
Mar 29, 2006
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better wway to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
View 3 Replies
View Related
