we are running SQL7.0. I execute a store procedure on Server A that insert a data into the table on Server B. I use a Link Server to connect from Server A to Server B. When I execute the SP, I got the messege 'The command(s) completed successfully'. When I select from the table was inserted, I don't see the data that was inserted. Can we update or insert tabel using Link Server.
Thanks.
Msg 7314, Level 16, State 1, Line 42
The OLE DB provider "SQLNCLI10" for linked server "192.168.0.40" does not contain the table ""CP_DW"."dbo"."StgDimSalesTargetSetup"". The table either does not exist or the current user does not have
permissions on that table.
Insert into [192.168.0.40].CP_DW.dbo.StgDimSalesTargetSetup
Select t.SalesTargetCode,t.SalesTargetId,t.TargetDefination,
--LEFT(DATENAME(MM, t.PeriodFrom), 3) + '-' + CONVERT(VARCHAR(4),DATEPART(YY, t.PeriodFrom)) AS MonthYear
--CONVERT (char(8),PeriodFrom,112) [Datkey],
Left(CONVERT (char(8),PeriodFrom,112),6) [Monthkey],t.PeriodFrom,t.PeriodTo,t.TargetAmount
FROM [SO_SalesTargetSetup] t
If I have a table with 1 or more Nullable fields and I want to make sure that when an INSERT or UPDATE occurs and one or more of these fields are left to NULL either explicitly or implicitly is there I can set these to non-null values without interfering with the INSERT or UPDATE in as far as the other fields in the table?
EXAMPLE:
CREATE TABLE dbo.MYTABLE(
ID NUMERIC(18,0) IDENTITY(1,1) NOT NULL,
FirstName VARCHAR(50) NULL,
LastName VARCHAR(50) NULL,
[Code] ....
If an INSERT looks like any of the following what can I do to change the NULL being assigned to DateAdded to a real date, preferable the value of GetDate() at the time of the insert? I've heard of INSTEAD of Triggers but I'm not trying tto over rise the entire INSERT or update just the on (maybe 2) fields that are being left as null or explicitly set to null. The same would apply for any UPDATE where DateModified is not specified or explicitly set to NULL. I would want to change it so that DateModified is not null on any UPDATE.
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
VALUES('John','Smith',NULL)
INSERT INTO dbo.MYTABLE( FirstName, LastName)
VALUES('John','Smith')
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
SELECT FirstName, LastName, NULL
FROM MYOTHERTABLE
I need to append data to the existing Table1 from a .txt file stored in a link e.g. "http://xx00xx0123.abcdef.net/ABC_REPORTS/DATA/Table1.csv"
(Columns in both tables are identical)
This .csv contains a rolling 7 days of stats. which means if it is added every Morning 6 of those Days will have been added before and must be Deleted.
I would like to schedule an automatic procedure to create a temp table in the server every day and a script removing duplicates.
I have a few questions:
*) Can I shedule from the Enterprise Console to read/create table from the above link to do this?
**) I heard I need an SQL agent. If so why and what is it?
***) Is it better to append data and then script removing Duplicates, or is it better to import into a temp table run comparison between the 2, Delete from Temp what is Common and then append whats left of the Temp to the Table1?
****) Please could someone paste a sample of CREATE TABLE from a http link like the one above?
Thanks for your help,
Gezza
Hi Folks,
Somehow i am stuck at a very basic step. I have two pages -
1. DomainList.aspx which just displays all the records from the Domains table.2. DomainAddEdit.aspx which displays the selected record in FormView(Edit Mode) with two link for Update and Cancel.
The Update link in the FormView does nothing on the first click. It just reloads the page with the new data I entered. If I click again on the Update link, it throws me an error:
"Cannot insert the value NULL into column 'DNS', table 'MSInteractive.dbo.Domains'; column does not allow nulls. UPDATE fails.The statement has been terminated. "
I have no clue why all this is happening. I have spent more than two days on this and this is very very frustrating.
Just to mention, I haven't written any code for this. Its developed all using the VWD tools available. I have posted this message earlier but haven't got any response. I am sure most of you guys must have been doing these steps everyday. So, please post your thoughts.
Thanks a million.
Here is the relevant code for my DomainADDEdit.aspx:
<asp:FormView ID="FormView1" runat="server" DataSourceID="SqlDataSource1" DefaultMode="Edit"> <EditItemTemplate> Id: <asp:TextBox ID="IdTextBox" runat="server" Text='<%# Bind("Id") %>'></asp:TextBox><br /> RegistrarAccountId: <asp:TextBox ID="RegistrarAccountIdTextBox" runat="server" Text='<%# Bind("RegistrarAccountId") %>'></asp:TextBox><br /> Registrar: <asp:TextBox ID="RegistrarTextBox" runat="server" Text='<%# Bind("Registrar") %>'></asp:TextBox><br /> DNS: <asp:TextBox ID="DNSTextBox" runat="server" AutoPostBack="True" OnTextChanged="DNSTextBox_TextChanged" Text='<%# Bind("DNS") %>'></asp:TextBox><br /> EmailHost: <asp:TextBox ID="EmailHostTextBox" runat="server" Text='<%# Bind("EmailHost") %>'></asp:TextBox><br /> Registered: <asp:TextBox ID="RegisteredTextBox" runat="server" Text='<%# Bind("Registered") %>'></asp:TextBox><br /> Expires: <asp:TextBox ID="ExpiresTextBox" runat="server" Text='<%# Bind("Expires") %>'></asp:TextBox><br /> MsiResponsible: <asp:CheckBox ID="MsiResponsibleCheckBox" runat="server" Checked='<%# Bind("MsiResponsible") %>' /> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:MSInteractiveConnectionString %>" SelectCommand="SELECT [Id], [RegistrarAccountId], [Registrar], [DNS], [EmailHost], [Registered], [Expires], [MsiResponsible] FROM [Domains] WHERE ([Id] = @Id)" UpdateCommand="UPDATE Domains SET DNS = @txtDNS WHERE (Id = @Id)"> <UpdateParameters> <asp:FormParameter FormField="DNSTextBox" Name="txtDNS" /> <asp:QueryStringParameter Name="Id" QueryStringField="Id" /> </UpdateParameters> <SelectParameters> <asp:QueryStringParameter Name="Id" QueryStringField="Id" Type="String" /> </SelectParameters> </asp:SqlDataSource><br /> <asp:LinkButton ID="UpdateButton" runat="server" CommandName="Update" Text="Update" OnClick="UpdateButton_Click"></asp:LinkButton> <asp:LinkButton ID="UpdateCancelButton" runat="server" CausesValidation="False" CommandName="Cancel" Text="Cancel"></asp:LinkButton> </EditItemTemplate>
I am trying to do the following:
Insert n rows into A Table called EAItems. For each row that is inserted into EAItems I need to take that ItemID(PK) and insert a row into EAPackageItems.
I'm inserting rows from a Table called EATemplateItems.
So far I have something like this: (I have the PackageID already at the start of the query).
INSERT INTO EAItems(Description, Recommendation, HeadingID)SELECT Description, Recommendation, HeadingIDFROM EATemplateItems WHERE EATemplateItems.TemplateID = @TemplateID INSERT INTO EAPackageItems(ItemID, PackageID) ....
I have no idea how to grab each ITemID as it's created, and then put it into the EAPackageItems right away.
Any Advice / help would rock! Thanks
HelloI used to work in a Sybase database environment. When I had to insert/update records in the database, I always used "insert on existingupdate", in this way, you didn't have to check whether a recordalready existed (avoid errors) and you were always sure that afterrunning the scripts, the last version was in the database.Now I'm looking for the same functionality in MS SQL Server, asked afew people, but nobody knows about such an option.Does anybody here knows the SQL Server counterpart of "insert onexisting skip/update"? If this doesn't exist, this is a minus forMS ;).Greetz,Bart
View 4 Replies View RelatedHi,
How can i store the record insert/update timestamp in a SQL server 2000 db programacally. ? what are the date/time functions in ASP.NET 2.0 ? I know that this can be done by setting the default valut to getdate() function in SQL, but any other way on ASP page or code-behind page ???
Thanks,
Alex
I have current current sql server 2000 database containing some columns in big5. To display these cols correctly, my asp.net nust have directive with CodePage="1252" ContentType="text/html;charset=BIG5". I can not update, or insert big5 character into these columns via .aspx page. I'm using .net framework 2.0. Please help me, thanks a lot for any help.
View 7 Replies View RelatedI have an application that calculates a bunch of numbers and then inserts them into a table (or updates a record in the table if it exists). In my test environment it is issuing 100 insert or update requests to the server per second and it could run for several hours.After a the first several hundred requests, the SQL server is bogging down (processor at 90-100%) and the application slows down while it waits on SQL to update the database.What would be the best way to optimize this app? Would it help to loop through all my insert/update requests and then send them as one big batch of statements to the server (per 1000 requests or something)? Is there a better way of doing this?Thanks!
View 1 Replies View RelatedAll:
I have created a stored procedure on SQL server that does an Insert else Update to a table. The SP starts be doing "IF NOT EXISTS" check at the top to determine if it should be an insert or an update.
When i run the stored procedure directly on SQL server (Query Analyzer) it works fine. It updates when I pass in an existing ID#, and does an insert when I pass in a NULL to the ID#.
When i run the exact same logic from my aspx.vb code it keeps inserting the data everytime! I have debugged the code several times and all the parameters are getting passed in as they should be? Can anyone help, or have any ideas what could be happening?
Here is the basic shell of my SP:
CREATE PROCEDURE [dbo].[spHeader_InsertUpdate]
@FID int = null OUTPUT,@FLD1 varchar(50),@FLD2 smalldatetime,@FLD3 smalldatetime,@FLD4 smalldatetime
AS
Declare @rtncode int
IF NOT EXISTS(select * from HeaderTable where FormID=@FID)
Begin begin transaction
--Insert record Insert into HeaderTable (FLD1, FLD2, FLD3, FLD4) Values (@FLD1, @FLD2, @FLD3,@FLD4) SET @FID = SCOPE_IDENTITY(); --Check for error if @@error <> 0 begin rollback transaction select @rtncode = 0 return @rtncode end else begin commit transaction select @rtncode = 1 return @rtncode end endELSE
Begin begin transaction
--Update record Update HeaderTable SET FLD2=@FLD2, FLD3=@FLD3, FLD4=@FLD4 where FormID=@FID;
--Check for error if @@error <> 0 begin rollback transaction select @rtncode = 0 return @rtncode end else begin commit transaction select @rtncode = 2 return @rtncode end
End---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Thanks,
Blue.
I am experimenting with using CDC to track user changes in our application database. So far I've done the following:
-- ENABLE CDC ON DV_WRP_TEST
USE dv_wrp_test
GO
EXEC sys.sp_cdc_enable_db
GO
-- ENABLE CDC TRACKING ON THE AVA TABLE IN DV_WRP_TEST
USE dv_wrp_test
[Code] ....
The results shown above are what I expect to see. My problem occurs when I use our application to update the same column in the same table. The vb.net application passes a Table Valued Parameter to a stored procedure which updates the table. Below is the creation script for the stored proc:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
if exists (select * from sysobjects where id = object_id('dbo.spdv_AVAUpdate') and sysstat & 0xf = 4)
drop procedure dbo.spdv_AVAUpdate
[Code] ....
When I look at the results of CDC, instead of operations 3 and 4, I see 1 (DELETE) and 2 (INSERT) for the change that was initiated from the stored procedure:
-- GET CDC RESULTS FOR CHANGES TO AVA TABLE
USE dv_wrp_test
GO
SELECT *
FROM cdc.dbo_AVA_CT
GO
--RESULTS SHOW OPERATION 1 (DELETE) AND 2 (INSERT) INSTEAD OF 3 AND 4
--__$start_lsn__$end_lsn__$seqval__$operation__$update_maskAvaKeyAvaDescAvaArrKeyAvaSAPAppellationID
--0x0031E84F000000740008NULL0x0031E84F00000074000230x02119Test26NULL
--0x0031E84F000000740008NULL0x0031E84F00000074000240x02119Test36NULL
--0x0031E84F00000098000ANULL0x0031E84F00000098000310x0F119Test36NULL
--0x0031E84F00000098000ANULL0x0031E84F00000098000420x0F119Test46NULL
Why this might be happening, and if so, what can be done to correct it? Also, is there any way to get the user id associated with the CDC?
I have Table Staffsubjects
with columns and Values
Guid AcademyId StaffId ClassId SegmentId SubjectId Status
1 500 101 007 101 555 1
2 500 101 007 101 201 0
3 500 22 008 105 555 1
I need to do 3 scenarios in this table.
1.First i need to update the row if the status column is 0 to 1
2.Need to insert the row IF SegmentId=@SegmentId and SubjectId<>@SubjectId and StaffId=@StaffId
3.Need to insert the row IF StaffId<>@StaffId And ClassId=@ClassId and SegmentId<>@SegmentId and SubjectId<>@SubjectId
I have wrote the stored procedure to do this. But the problem is If do the update. It is reflecting in the database by changing 0 to 1. But it shows error like cannot insert the duplicate
Here is the stored Procedure what i have wrote
ALTER PROCEDURE [dbo].[InsertAssignTeacherToSubjects]
@AcademyId uniqueidentifier,
@StaffId uniqueidentifier,
@ClassId uniqueidentifier,
@SegmentId uniqueidentifier,
@SubjectId uniqueidentifier
[Code] ....
If a column is set to allow nulls I know that a constraint can be used to supply a default (i.e. GetDate() ) when no value is provided but what about when an explicit NULL is provided in an INSERT or UPDATE statement?Is there any way other then an AFTER trigger to substitute a value for an explicitly provided NULL? In other words, assuming that dtAsof is a NULL enabled column, is there any way to over ride what the following will do to MYTABLE:
INSERT MYTABLE(sCol1, sCol2, sCol3, dtAsOf)
SELECT 'a', 'b', 'c', NULL
If there's no way to do this in SQL Server 2008R2 then what about later versions of SQL Server? Do any more recent versions have a way to deal with this? We have a third party app that uses a SQL Server back end and many of the tables have columns for storing audit like data such as date/time but many are left to NULL values and I'd really like to fix that in as passive a way as possible so as to not break the app that uses the database. I know a constraint with a default can be sued to over ride a null but not when a null is explicitly provided.
I have created an Access2003 project (existing data) that links to external data. First I connected to a SQL Server 2000 database. Success. Then I tried to set up a Transact SQL data connection to a legacy MDW-secured Access97 database. (A third-party VB6 application goes against it, and we don't have the source code, so we cannot upgrade it.)
The Transact SQL link tests OK but I cannot select any of the tables or queries from the list presented. However, with the same credentials, I can use these same objects in Excel 2003.
When setting up the link in Access2003, I specify JET 4.0 OLE DB Provider, I enter the MDW file on the All tab, a username and a password on the Connection tab where I browse to the MDB file, and specify Shared Deny None on the Advanced tab. When I test the connection, it tests OK ("Test connection succeeded"). Yet on the "Select the Database and Table/Cube which contains the data you want" dialog, "(Default)" appears in the grayed-out dropdown. Then, beneath that dropdown, there is a grid with Name and Description columns. The grid contains query names but the grid is not enabled. The list of queries is this table is grayed out. Neither of the scrollbars works.
BUT... if I use the SAME username and password in Excel2003, and specify the same MDW, there is no problem working with these same database objects in the legacy Access97 database. WHAT IS DIFFERENT ABOUT THE WIZARD IN EXCEL THAT ALLOWS IT TO SUCCEED AND THE WIZARD IN ACCESS THAT CAUSES IT TO FAIL HERE? In Excel, the list of available providers says Microsoft Access Driver, not JET 4.0 OLE DB Provider.
Thanks
TR
When trying to link to an SQL table in Access 2003, the software appears to be malfunctioning.
The sequence of events is File - Get External Data - Link Tables - Files of Type: ODBC Databases().
The Problem: On two of my computers, the select data source window does not pop up, preventing me from linking to any ODBC data source.
Observations: This function has worked normally in the recent past and works on other computers running Access 2003. One difference between the computers working and non-working computers is Norton Antivirus 2006 (recent upgrade).
Has anyone experienced anything like this? What's going on?
I have a web form with a text field that needs to take in as much as the user decides to type and insert it into an nvarchar(max) field in the database behind. I've tried using the new .write() method in my update statement, but it cuts off the text after a while. Is there a way to insert/update in SQL 2005 this without resorting to Bulk Insert? It bloats the transaction log and turning the logging off requires a call to sp_dboptions (or a straight-up ALTER DATABASE), which I'd like to avoid if I can.
View 6 Replies View RelatedOur system runs a SQL Server 2012 DB, it has a table (table_a) which has over 10M records. Our system have to receive data file from previous system daily which contains approximate 3M updated or new records for table_a. My job is to update table_a with the new data.
The initial solution is:
1 Create a table (table_b) which structur is as the same as table_a
2 Use BCP to import updated records into table_b
3 Remove outdated data in table_a:
delete from table_a inner join table_b on table_a.key_fileds = table_b.key_fields
4 Append updated or new data into table_a:
insert into table_a select * from table_b
As the test result, this solution is very inefficient. Step 3 costs several hours, e.g. How can I improve it?
i would like to know it's possible to find all transaction(insert, delete,update) on a database for a day. if yes what can i do.
View 2 Replies View RelatedI am inserting updating few tables from snapshot and reading same bunch of tables from reporting using readcommitted . It is showing some deadlocks i think it is write in this situation as " x" is not compitable with "s" ,"is".
View 4 Replies View RelatedI'm working on inserting data into a table in a database. The table has two separate triggers, one for insert and one for update (I don't like it this way, but that's how it's been for years). When there is a normal insert, done via a program, it looks like the triggers work fine. When I run an insert manually via a script, the first insert trigger will run, but the update trigger will fail. I narrowed down the issue to a root cause.
This root issue is due to both triggers using the same temporary table name. When the second trigger runs, there's an error stating that a few columns don't exist. I went to my test server and test db and changed the update trigger so that the temporary table is different than the insert trigger temporary table, the triggers work fine. The weird thing is that if the temporary table already exists, when the second trigger tries to create the temporary table, I would expect it to fail and say that it already exists.I'm probably just going to update the trigger tonight and change the temporary table name.
I have a situation where I have Table A, Table B.
View C is created by joining table A and table B.
I have written a instead of trigger D on view C.
I do not insert/update/delete on the view directly.
For every insert/update in table A /B the values should get insert/update in the view respectively. This insert/update on view should invoke the trigger.
And I am unable to see this trigger work on the view if any insert/update occurs on base table level.
Trigger is working only if any operation is done directly on the view.
Hello
I've to write an trigger for the following action
When a entry is done in the table Adoscat79 having in the index field Statut_tiers the valeur 1 and a date in data_cloture for a customer xyz
all the entries in the same table where the no_tiers is the same as the one entered (many entriers) should have those both field updated
statut_tiers to 1
and date_cloture to the same date as entered
the same action has to be done when an update is done and the valeur is set to 1 for the statut_tiers and a date entered in the field date_clture
thank you for your help
I've never done a trigger before
Hello,I am writing a stored procedure that will take data from severaldifferent tables and will combine the data into a single table for ourdata warehouse. It is mostly pretty straightforward stuff, but there isone issue that I am not sure how to handle.The resulting table has a column that is an ugly concatenation fromseveral columns in the source. I didn't design this and I can't huntdown and kill the person who did, so that option is out. Here is asimplified version of what I'm trying to do:CREATE TABLE Source (grp_id INT NOT NULL,mbr_id DECIMAL(18, 0) NOT NULL,birth_date DATETIME NULL,gender_code CHAR(1) NOT NULL,ssn CHAR(9) NOT NULL )GOALTER TABLE SourceADD CONSTRAINT PK_SourcePRIMARY KEY CLUSTERED (grp_id, mbr_id)GOCREATE TABLE Destination (grp_id INT NOT NULL,mbr_id DECIMAL(18, 0) NOT NULL,birth_date DATETIME NULL,gender_code CHAR(1) NOT NULL,member_ssn CHAR(9) NOT NULL,subscriber_ssn CHAR(9) NOT NULL )GOALTER TABLE DestinationADD CONSTRAINT PK_DestinationPRIMARY KEY CLUSTERED (grp_id, mbr_id)GOThe member_ssn is the ssn for the row being imported. Each member alsohas a subscriber (think of it as a parent-child kind of relationship)where the first 9 characters of the mbr_id (as a zero-padded string)match and the last two are "00". For example, given the followingmbr_id values:1234567890012345678901123456789021111111110022222222200They would have the following subscribers:mbr_id subscriber mbr_id12345678900 1234567890012345678901 1234567890012345678902 1234567890011111111100 1111111110022222222200 22222222200So, for the subscriber_ssn I need to find the subscriber using theabove rule and fill in that ssn.I have a couple of ideas on how I might do this, but I'm wondering ifanyone has tackled a similar situation and how you solved it.The current system does an insert with an additional column for thesubscriber mbr_id then it updates the table using that column to joinback to the source. I could also join the source to itself in the firstplace to fill it in without the extra update, but I'm not sure if theextra complexity of the insert statement would offset any gains fromputting it all into one statement. I plan to test that on Monday.Thanks for any ideas that you might have.-Tom.
View 4 Replies View RelatedCan I roll back certain query(insert/update) execution in one page if query (insert/update) in other page execution fails in asp.net.( I am using sqlserver 2000 as back end)
scenario
In a webpage1, I have insert query into master table and Page2 I have insert query to store data in sub table.
I need to rollback the insert command execution for sub table ,if insert command to master table in web page1 is failed. (Query in webpage2 executes first, then only the query in webpage1) Can I use System. Transaction to solve this? Thanks in advance
Can any one tell me what I did wrong? Tried to set up link server from SQL 7.0 to Oracle.I did it as it was instruct in BOL. When I tried to click on the table, I got this message "error 7399: OLE DB provider "MSDAORA" reported error. Thanks.
View 1 Replies View RelatedI have created a linked server using an userid that have access to 2 different databases. The linked
was created successfully but I am only able to see tables in 1 database but not both.
The tables of the databases that I can access is the default database of that userid. Is there a way to see all the
tables from more than 1 database that the user is authorized to? Thanks.
I need help on creating Link Servers. The error message that I get says the link server is been created but it fails to connect.
View 2 Replies View Related Error 7302: Could not create an instance of OLE DB provider 'SQLOLEDB'. OLE DB error trace [Non-interface error: CoCreate of DSO for SQLOLEDB returned x8007007f].
CASE:
I created a link server from SQL Server 2000 to FoxPro database using vfpoledb driver. SQL server and FoxPro database are NOT being run on the same machine.
Server1 - SQL Server 2000 (I created the link server which connects to Server2)
Server2 - FoxPro database
TROUBLESHOOT
When I test the link server on the machine which has FoxPro database , It is working with no problem.
PROBLEM STATEMENT:
When a user machine sends a query to Server1/Link Server, it is getting Error:7302
Please help me.
Sql Server 7 Standard EditionMy Server was renamed and the normal steps of reinstallingand running sp_dropserver and sp_addserver were followed.Everything seems to work fine but jobs from the master server.I did defect the server as a target server since it appeared as offlineanyway.On trying to re establish the status of the server as a target serverFailed to make "serverName" a target serverEnlist into Master Server "MasterServerName" Failed(Error 14262)Your insight is appreciatedVincento
View 3 Replies View Relatedhello. I have a windows 2003 server with sql server 2000 and a public IP address and domain name
when i am on the same network as the server I can link to the sql server with just the dowmain name www.omghelp.com
but when I take that same access adp file or mdb file home it says "database can not be found "
what do i need to get it to work...help please
Hi,
I have two database one on local system and another on web both are in MS SQL 2005 Now I want to link both of them by using Link server but the System procedure ask of oledb I am not understanding what to do.
I searched the web but .....
So plz tell me some link or code ........
thanks
Is it possible to link MSDE to another server through ODBC? I want to do this like you can in Access, where you get external data by linking tables. Any ideas? Thanks!
View 1 Replies View Related