I am new to integration services. I am trying to a build a data warehouse and need to be able to insert new data as well as update data that has changed. I am getting the data in a flat file and need to import it into SQL 2005. I saw some post on www.sqlis.com/default.aspx?311 but I did the example is for OLE DB component. I am not sure how to achieve this using a text file as source. Any help would be greatly appreicated.
View 3 RepliesGreetings. I have been trying to develop an SSIS package that updates external data (Visual FoxPro tables) from SQL Server 2005. I have tried this various ways: using various Data Flow task components that flow to an OLEB Destination; using an Execute T-SQL Task; and even trying Management Studio interactively with the OpenDataSource('vfpoledb', etc.) statement. For each of these techniques, I have no problem performing a SELECT from the VFP data. Also, I have no problems performing an INSERT of new records using any of these techniques. However, both UPDATE and DELETE of existing records fail.
Is it possible the the OLE DB driver doesn't support UPDATE and DELETE operations? It appears that I'm not allowed to change or delete existing records, only add new ones. Or, are there other techniques I can be trying?
I am aware that updating FoxPro data can be performed by pulling the data from SQL Server into FoxPro. For our purposes, it would be more convenient if the processes could be initiated and managed from the SQL Server side of things instead.
Thanks much,
Randy Witt
I am using SSIS integration between two database. Both databases are sql server 2008. using many integration but getting problem in two only only two integration giving problem, both are executing perfectly and out put also not showing any error.
but destination table not inserted/updated anything.
first issue integration is using data flow task with oledb source and destination.
second one is using execute task with for-eachloop container.
Dear all -
iam facing a problem to insert data to paradox table by using OLE DB Destination ,
Briefly i built a simple data flow the has OLE DB Source from paradox Table1 and it linked to OLE DB Destination for another Paradox Table2 (i use query to get the table2 data in OLE DB Destination because it refuse to get data Directly) .
The problem that when i start debugging an error raise as the following:
Error: 0xC0202009 at Data Flow Task 1, OLE DB Destination [554]: An OLE DB error has occurred. Error code: 0x80040E09.
Error: 0xC0047022 at Data Flow Task 1, DTS.Pipeline: The ProcessInput method on component "OLE DB Destination" (554) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task 1, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0202009.
i hope someone help soon because i need to handle this problem as soon as possible
thanks ,
Maylo
Hello All
Firstly thanks a lot Phil and Jamie on such a helpful article on "Checking to see if a record exists and if so update else insert"
Here is my question
I have about 10 tables and there respective working tables
For examples: A, B, C, D, E.... and WorkA, WorkB, WorkC....
Notes:
1) When I execute a package these work table (Work A, WorkB ...) get populated with certain rows say about 5
2) Its not that all the work table are populated on every execution.
3) Tables A, B, C... have thousands of records in it.
4) Work table is of same structure as there parent table..Like WorkA same structure as A.....
5) The table A and WorkA and as on... are linked with a KeyID
Now I want to build a SSIS package that can
1) Get the the data from these multiple tables(WorkA, WorkB...)
2) Process each row of these tables WorkA, WorkB..
3) Depending upon the KEYID of WorkA., WorkB.. etc Update a Flag colunm of table A, B...where the KeyID is equal to KeyID of Work Table
4) After updating insert that processed row of Work A, WorkB ...into Table A, B..
I can do this if I have one source table and one destination table. Here i have some say 10 randomly source tables to respective random destination .
All I could think of creating 10 different packages as adviced in Jamie's article. But I am sure there might some other alternative.
Can somebody advice me the best practice of doing this. Thanks a lot in advance
I am working on SSIS wehre I need to work on a flat file as a source and needed to import it to database. If the destination table have the record already, I need to update it and if not exist, I just need to import the whole data.
View 9 Replies View RelatedHello,
In a Data Flow Task, I have an insert that occurs into a SQL Server 2000 table from a fixed width flat file. The SQL Server table that the data goes into is accessed through an OLE DB connection manager that uses the Native OLE DBMicrosoft OLE DB Provider for SQL Server.
In the OLE DB Destination, I changed the access mode from Table or View - fast load to Table or View because I needed to implement OLE DB Destination Error Output. The Error output goes to a SQL Server 2000 table that uses the same connection manager.
The OLE DB Destination Editor Error Output 'Error' option is configured to 'Redirect' the row. 'Set this value to selected cells' is set to 'Fail component'.
Was changing the access mode the simple reason why the insert from the flat file takes so much longer, or could there be other problems?
Thank you for your help!
cdun2
I want to insert data calling a stored procedure and call this from a Data Flow destination object. Is it possible?
I understand that Ole Db Command transformation object can call stored procedure, but that will not rollback in the event of error in the middle.
I understand that Ole Db Destination object will rollback in middle of import, but I don't see how to do the insert by calling stored procedure. "Sql Command" option in Ole Db Destination object does not seem to present solution to the problem.
Am I missing something here or is Ssis / Microsoft demanding that Insert stored procedure not be used when using Data Flow destination object to insert data into target table?
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
Hi, I was wondering how I can complete a column (which doesnt have an input one) with data.
For example:
I have a sql query which bring data of 3 columns
ID | FISRT NAME | LAST NAME
1 MIKE MORGAN
2 SARA JOHANES
So, I will insert that data in a FLAT FILE CONNECTION MANAGER, which I configured with 3 columns and I did the corresponding mapping in the FLAT FILE DESTINTATION.
Now, If I add one more column in the FLAT FILE CONNECTION MANAGER, I will not have it mapped to a input one, obviously. So, what I need is to add one more column to the flat file destination and complete it with zeros values in it.
Probably I can solve this part by introducing a DERIVED COLUMN and there I can configure the zeros that I want to add to the column. But I'm not sure if I can do that without having a input column.
So, the question will be, how can I add one column to a flat file which doesnt have a input and introduce any value that I want to it?
Hope I was clear
Thanks for your help.
Beli
Hi guys,
I have a situation that i have to insert or update
the data from sql server 7.0 to Oracle 8+Database.
the requirement is that
if the data is not in Oracle
then Insert the data
else if the data exists
then Update the data.
I dont know how to use in DTS. DTS Documentation says
that u can use DataQuery but they had not given the example.
Second thing is how to connect to the Oracle
using ACtive X Script - DTS.
Please, Can anyone help me.
Thx in Adv.
Sreedhar Vankayala
I have a table called drugs with a cost, date, and drugname field. I have a history table that I want to insert into anytime the fields are changed in the drugs table. I want to capture the old data along with the new cost. is that possible in a update trigger? What I have below doesn't like when it comes to setting the new cost
create trigger Updt_drugs on drugs for update as
-- updates record with sql user and timestamp
--created 1-12-02 tim cronin
declare @newcost money
begin
set @newcost = select cost from inserted
insert into drugsold ([oldcost],[cost],[cdate],[drug])
select [cost],@newcost,[cdate],[drug]
from deleted dt
end
I'd like to do the following thing with a data flow task
Get all the records from a source (for example customers from a textfile, flat file source)
Then check for each record if the customer already exists in a table, for example with a customerID. If not, insert the record in the table (ole db destination), else copy the customer thats already in the table to another table (history table) and update the record with the customer from the textfile.
Is this possible?, and what kind of data flow transformation do I need?
Hi everyone..i m new to this field.. can anyone explain me with simple example onhow to insert,update,select data from the sqldatabase? i m using vwd 2005 express edition along with sql express edition. plz explain the simple example with code (C#) including how to pass connection strings etc.thank you.jack.
View 6 Replies View RelatedIm using a store proc in SQL server.I use one table to store my hockey statistics data of each player in the league.When i submit my form i would like to check if there is any sheet of that player that allready exist .. If so then i do update.. if it does not exist i do the insert statement.Here the way i figured it out ! One store proc to do the work of the insert or update. And one to check if the player exist in the statistics table. But i just cant find a way to return a good value from my second store proc. Does my logic make sence ? any ideas ?thank you<code>create procedure Hockey_Player_UpdateForwardStatistics
@LeagueID int, @GamePlayerID int, @Games int
as
declare @PlayerID int
@PlayerID = Hockey_CheckPlayerStatistics(@LeagueID, @GamePlayerID)
if @PlayerID = 0begininsert into Hockey_PlayerStatistics( Games)values( @Games)end
ELSE
beginupdate Hockey_PlayerStatistics set Games = @Gameswhere LeagueID = @LeagueID and PlayerID = @PlayerIDend</code>
How do i update the stats of tables when we insert data into it. I believe Auto stats update happens only when 500+ 20% of the rows are changed for a table. Once we insert say some 1000 records in to a particular table the query time takes too long (more than 1 min). The same query executes faster once i manually update the stats.
View 3 Replies View RelatedFrom: JAGADISH KUMAR GEDELA [jgedela@miraclesoft.com]
Sent: 10/10/2007 4:13:43 PM
To: jgedela@miraclesoft.com [jgedela@miraclesoft.com]
Subject: forum
Hi all,
I need to Insert the XML File data into SQL SERVER 2005 db(table).
For that I created the table with XML Native column (using typed xml)
*********************************create table command************
CREATE TABLE XmlCatalog (
ID INT PRIMARY KEY,
Document XML(CONTENT xyz))
***********************************
In order to Create the table with typed xml ,before that we have to create the xml schema which i
mentioned below
************************************create schema command********
CREATE XML SCHEMA COLLECTION xyz AS
'Place xml schema file ’
************************************
I created the xml schema file by using the xmlspy software.
--------------------------Insert command---------
INSERT into XmlCatalog VALUES
(1,'copy xml file ‘)
-------------------------------
I need to retrieve the xml data from the table
------------select query----------
SELECT Document.query (‘data (/X12//UserId)') AS USERID,
Document.query (‘data (/X12/X12_Q1/header/ISA//ISA_Authorization_Information_Qualifier)')
AS
ISA_Authorization_Information from XmlCatalog.
-----------------
I Need to update/insert/delete the xml data in the table
Can you please suggest the procedure to implement the above requirement(insert/update/delete)
Hi all,
How to update a particular value in xml file which was loaded into sql server 2005 database
which is of xml-type
How to DELETE a particular value in xml file which was loaded into sql server 2005 database
which is of xml-type
how to INSERT a particular value in xml file which was loaded into sql server 2005 database
which is of xml-type
update XmlCatalog1 set Document1.modify('delete /X12_U1_837/X12_Q1_837/header/ISA//ISA_Authorization_Information_Qualifier') where id=2
----------
The error which i am getting is
XML Validation: Invalid content. Expected element(s):ISA_Authorization_Information_Qualifier where element 'ISA_Authorization_Information' was specified. Location: /*:X12_U1_837[1]/*:X12_Q1_837[1]/*:header[1]/*:ISA[1]/*:ISA_Authorization_Information[1]
hi. i'm trying to create a c# application which would insert, update and delete data from a database. could anyone pls point me to the right direction in which i should take? thanks in advance.
View 1 Replies View RelatedHello,
I have some data coming up from an SQL Server source, I have to add it to another SQL Table on the basis of what destination table already have.
For instance, if there is already an entry there for particular record (based on matching primary key value), then I just need to updated 3 columns, otherwise need to insert.
The problem is, I know how to do it by using script component, but I am wondering if there is a better tool that saves me writing code
Any idea?
Thanks,
Fahad
I have created two table with same data structure. I need realtime effects (i.e. data) on both tables - Table1 & Table2.
Following Points to Consider.
1. Both tables are in the same database.
2. Table1 is using for data entry & I wants the same data in the Table2.
3. If any row insert, update & delete occers on Table1, the same effect should be done on Table2.
4. I need real time data insert, update & delete on Table2.
I knew that using triggers it could be possible, I have successfully created a trigger for inserting new rows (using logical table "Inserted") in Table2 but not succeed for update & delete yet.
I want to understand how can I impletement this successfully without any ambiguity.
I have attached data structure for tables. Thanx...
Is it possible to allow a user to insert and update data in a table but prevent them from performing deletes against that same table? For auditing purposes I need to prevent the end users from being able to delete data.
View 1 Replies View RelatedDear All,
Im using VS2008, visual basic and SQL Server express.
General questions please: Is it necessary, to issue some sort of command, to 'commit' data to a SQL express database after a INSERT or UPDATE sql command?
I'm getting strange behavior where the data is not refreshed unless i exit my app and re-enter. In other words, i can run a sql command , the data is apparantly saved (because i get no errors) then if i refresh a data set or do a sql select query the data that i expect to return is not there.
Im fairly new to SQL express (and SQL server generally) so i dont know if its my coding or i need to switch some 'feature'
on/off or not.
I hope thats clear
Also, could someone point me to documentation that explains each parameter in the connection string
Many Thanks
Chris Anderson
My code is:
ConnectionString = "Data Source=.SQLEXPRESS;AttachDbFilename=C:myfile.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True"
Connection = New SqlConnection
Connection.ConnectionString = ConnectionString
Connection.Open()
'''''''''''''''''the above code is done at the start of my application
'''''''this code below called during application many times
dim sql as string = "my sql string here"
Dim cmd As SqlCommand = Nothing
cmd = New SqlCommand(sql, Connection)
Try
cmd.ExecuteNonQuery()
Catch err As SqlException
MessageBox.Show(err.Message.ToString())
MessageBox.Show(sql, "SQL ERROR: ", MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
cmd.Dispose()
Hola!I'm currently building a site that uses an external database to store all the product details, and an internal database that will act as a cache so that we don't have to keep hitting the external database to retrieve the products every time a customer requests a list.What I need to do is retrieve all these products from External and insert them into Internal if they don't exist - if they do already exist then I have to update Internal with new prices, number in stock etc.I was wondering if there was a way to insert / update these products en-mass without looping through and building a new insert / update query for every product - there could be thousands at a time!Does anyone have any ideas or could you point me in the right direction?I'm thinking that because I need to check if the products exist in a different data store than the original source, I don't have a choice but to loop through them all.Cheers,G.
View 2 Replies View RelatedWe are experiencing problems inserting or updating image fields fromone table to another in SQL Server.When we do this what ever size of file we insert is doubled in sizewhen it is inserted into the destination table.This happens in insert and update queries, and if we use DTS.Any help would be greatly appreciated
View 3 Replies View RelatedHowdy,
Am trying to find a way to insert/update/delete data in a SQL mobile database on a Windows CE 5.0 device FROM a desktop PC.
This situation is completely stand alone, no network (apart form device/desktop), no GPRS etc etc etc.
I've looked at RDA but i dont believe it fits my app. (pulling data from a 2005 server that doesnt exist doesnt really help me much, push can't be used without a pull which kills the idea.)
The goal is a UI on the desktop that can manipulate data in the SQL mobile Database.
I've tried all i can find/think off in relation to this but to no avail.
My latest attempt has been using the simplest method possible (using a VS wizard datasource to the devices DB and tryign to whack that on a form) but this just creates a "Path not found. Check the directory for the database [Path = Mobile Device/ce_swipe/TestDB.sdf".
Am using SSIS to integrate between two database. First one is insert data from SQL to Sybase. its working fine and insert simulatenously. Now need to update table from sybase to SQL with condition(where). How to do this task. Is there any possiblities to execute SSIS without using SQL agent, update simultaneously whenever insert new data in both database.
View 8 Replies View RelatedI have an SQL data source on my page and I select "Table". On the next screen I pick the fields I want to show. Then I click the "Advanced" button because I want to allow Inserts, updates and deletes. But its all greyed out abd I can't check this option. The UID in the connection string I am connecting under has the correct permissions in SQL server to do inserts, update and deletes too. Anyone know why it would be greyed out? The connectionstring property in the aspx code is dynamic but this shouldn't be the reason because I have used this before with success
View 2 Replies View RelatedI have an API which uses the MDS WCF methods to update and insert entity members into MDS. Its working as expected. But whenever a entity member is inserted or updated, the validation flag is set to "requires re-validation" (With "?" symbol). Is there a setting which has to be set to validate the record once inserted or updated by API? Or should it be validated explicitly once the insert or update happens?
View 4 Replies View RelatedHi,
I'm reasonably new to ASP.NET 2.0
I'm in my wizard_FinishButtonClick event, and from here, I want to take data from the form and some session variables and put it into my database via a stored procedure. I also want the stored procedure to return an output value. I do not need to perform a select or a delete.
For the life of me, I can't find a single example online or in my reference books that tells me how to accomplish this task using a SqlDataSource control. I can find lots of examples on sqldatasources that have a select statements (I don't need one) and use insert and update sql statements instead of stored procedures (I use stored procedures).
I desperately need the syntax to:
a) create the SqlDataSource with the appropriate syntax for calling a stored procedure to update and/or insert (again, this design side of VS2005 won't let me configure this datasource without including a select statement...which I don't need).
b) syntax on how to create the parameters that will be sent to the stored procedure for this sqldatasource (including output parameters).
c) syntax on how to set the values for these parameters (again...coming from form controls and session variables)
d) syntax on how to execute, in the code-behind, the stored procedure via the sqldatasource.
If anybody has sample code or a link or two, I would be most appreciative.
Thank you in advance for any help!
I am currently working with C and SQL Server 2012. My requirement is to Bulk fetch the records and Insert/Update the same in the other table with some business logic? How do i do this?
View 14 Replies View RelatedGreetings from a SSIS newbie still on the learning curve...
I have a SQL query OLE DB Source that yields a result set that I'd like to put into a SQL Server Destination, but only those records that don't already exist in the destination.
Is there a recommended (read: easy) way to accomplish this? Perhaps a handy transformation?
I have tried to incorporate a subquery in my source query along the lines of:
SELECT fields FROM table1 WHERE keyfield NOT IN (SELECT keyfield from table2)
which works in design time but fails at the server with a cryptic:
"Error: Unable to prepare the SSIS bulk insert for data insertion."
and
"Error: component "<component>" (16) failed the pre-execute phase and returned error code 0xC0202071."
Don't mean for that to cloud the issue, though. I would appreciate any help given.
Thanks!
Paul
All,
I am having a brain-fart or something. I need help!!!
I'm developing a transform that selects data from a SQL script, then transforms that data, and then needs to update the data back into the same source table. The transform is working great, but I can't figure out the update table part. I've got it adding the transformed records to the table, but that's not what I need to do. I need to update the table with the changed data.
Any sample code or blog links would be greatly appreciated!
Thanks for the help!
-Scott