Hello, in my scenerio i am pulling a table from msde to my ppc and then i want to insert a new record to my local table but when i try to do that i faced with an index paradox forexample:
if i pulled a table with record index 1 then i am triying to insert a new record at local but at local it tries to insert index 1 again so i can't finish my operation. My primariy index is seed 1 also. How can i achieve my goal?
I'd *like* to execute a sProc within another sProc, because this other one (let's call it dataProc) will provide me with results I need that are calculated based off execing other procs within that proc itself.
I'd like to use this data in a new sProc (we'll call it newProc), but I don't need NEARly all of the columns. The dataProc returns 1 row with 42 columns. I need about 4-5 of those for my newProc.
The dataProc does not have any output variables, and I do not want to change the signature, because several pages/apps use this existing dataProc.
My question:
Is there a way to INSERT INTO table EXEC dataProc
*Without* making a temp table that takes in every single column the dataProc puts out?
Any help is much appreciated.. thanks!
I have my database: "RequestTrack"
My table (with its columns): "Request"RequestKey (automatically generated)..and the Primary KeyEntryDate (datetime)Summary (nvarchar)RequestStatusCodeKey (bigint)EntryUserID (nvarchar)EntryUserEmail (nvarchar)I am wanting to create a basic web form where my user interface has 3 text boxes and a Submit button:
txtUserID.TexttxtEmailAddress.TexttxtRequestSummary.Text
**After I hit the submit button the information will then be inserted into the database. Also the RequestStatusCodeKey will be MANUALLY typed in so that will not require the user to add that. Please please please help ! I've been searching online for days and looking at various websites and still havent found anything. I've found somethings but they went into too much depth with too much information. I am just wanting to stay basic but w/o using SQLDataSource Controls. I would like to be able to store a lot of data. Thanks for your help!!!
Hi all,
I have following problem:
I'm developing a Windows Mobile application, which is using RDA Pull for retrieving data from SQL Server 2005 database to PDA. Please, see the example:
Code Snippet
using (SqlCeEngine engine = new SqlCeEngine(connStr))
{
engine.CreateDatabase();
}
serverConnStr="Provider=SQLOLEDB;Data Source=.;User ID=sa;Initial Catalog=Demo;Password=xxx";
using (SqlCeRemoteDataAccess rda = new SqlCeRemoteDataAccess(
Configuration.Default.SyncServerAddress, "", "", connStr))
{
rda.Pull("MyTable", "SELECT * FROM mytable", serverConnStr, RdaTrackOption.TrackingOffWithIndexes, "ErrorTable");
}
Everythink works fine, when I use 'sa' user account in serverConnStr.
But, when I change conn string to:
"Provider=SQLOLEDB;Data Source=.;User ID=test;Initial Catalog=Demo;Password=test"
the sqlcesa30.dll cannot connect to SQL Server database.
In the sqlcesa30.log then I found following line:
Code Snippet
2007/04/17 10:43:31 Thread=1EE30 RSCB=16 Command=PULL Hr=80040E4D Login failed for user 'test'. 18456
The user 'test' is member of db_owner, db_datareader and public roles for the Demo database and in SQL Server Management Studio I'm able to login to the Demo database with using the 'test' users credentials and I'm able to run the select command on 'mytable'.
So, what's wrong? Why the sqlcesa30.dll process cannot login to the Demo database, and from another application with using the SAME connection string it works?
Please help.
Thank you.
Fipil.
All,I did it in ASP 1.0 with the datareader but in 2.0 the data reader appears to be gone, so how do i retrive a pdf out of the sql db and show it in a blank web page, tiajtr
View 4 Replies View RelatedHello everyone,
For the sake of simplicity let's imagin we have two tables simple tables: Categories(Id, Name) and Products(Id, CategoryId, Name). My question is how can I make a product list, filtered by category, using a Stored Producedure (SP). My objective is to have the SP receiving the list of categories we want to display, as an input parameter, using it in the SQL Statement. Something like:
Procedure:ListProductsFilteredByCategory@Categories AS NVarCharSELECT [C.Name] AS CategoryName ,[P.Name] AS ProductNameFROM Products PJOIN Categories C ON C.Id = P.CategoryIdWHERE IN (@Categories);
How could I make this SP work in a way that @Categories can contain an undefined number of category IDs?
Best regards,DBA
Hi,
I am trying to write a stored proc which returns a value to me. with the parameters I'm supplying to the stored proc, it results in a set of rows and what I need is to get the a filed value of the last selected row of this query. Do I need to write two queries for this? It is something opposite to the TOP keyword functionality. I need the one of the field values in the last row. Cud anyone help me with this??
I'm trying to replicate two very big databases with about 10 million
of 4000 characters each. The publisher is SQL 2000, subscriber
is SQL 7.0
The subscriber will also perform full text searches.
I'm trying to decide wheter I should use PULL or PUSH.
The publisher is operating on a very low quality/speed internet
connection, where the subscriber is enjoying a T1.
Help, anyone?
Thanks,
-Michael.
I seem to be missing something.
I'm trying to pull a subscription from SQL Server 2000.
(To a desktop SQL 2000 install <msde i guess>)
The general error I keep running into is
When creating the subscription...
"Error 15004: Name cannot be NULL"
I cannot figure out where this problem originates.
I'm running the SQL Service account and Executive under a domain account.
(same one on both machines)
Does anyone know where I'm missing the Permissions for the subscription?
Please impart any Replication suggestions you have. Don't hold back....
Thanks in Advance,
Dano
My name is Tech guy,
I want to use window script program to execute a pull subscription installed on SQL 2005 express edition. Because it free for downloand.
is there a script that can call an existing pull subscription execution.
I am trying to pull the last three entries from a table in my database but I am having trouble writing the correct query. The database has multiple entries for each item in my database but I want to pull just the last three for each item. I have tried the TOP function with the items ordered in descending order but that only works when I define each item seperatley. I need to know how to pull the last three entries for every item I have in the table.
Thanks,
Tim
Hi to all.
How can we identify that a transactional replication is configured in pull or push subscription..
where we have to check it out.
How can i pull data by datetime on same day? can't manually put the datetime as i would like to schedule it
daily 2014-09-05 00:00:00.000 to 2014-09-05 03:59:59.999
select ... from ..
where goingOffdatetime >= GETDATE()
and goingOffdatetime <= ...
Are there any procedural differences between Express and MSDE considering pull subscription?
Thanks
abdul
Hi,
I am new to SQL Mobile programming. I am using SQL Server 2005 Mobile and SQL Express. I have a mobile windows application + .sdf file in the PDA. When i try to pull the table the first time, the table is successfully retrieved to PDA. When i try to pull the table again, i get the following error:
"An unexpected error has occured in TestDb.exe. Select quit and then restart this program, or sleect details for more information.
A duplicate value cannot be inserted into aunique index. [table Name=_sysRDASubscriptions, constraint name=c_LocalTableName] "
The above message indicates, that the table is existing in "_sysRDASubscriptions" table.
I tried dropping the table using SQL Explorer in PDA, but it didn't work out.
I am not sure of how to drop the existing table from the database programatically, and if I drop the table from the database, will this be cleared.
Please help me in resolving this issue. I am in desperate need of an urgent solution for this.
Thanks
Prasanna
Dear All,
I created a sample test application to implement RDA, after I made all required configuration, I got the following exception after call rda.pull() :
{
Error # 1 of 1
Error Code: -2147024809
Message : An error has occurred on the computer running IIS. Try restarting the IIS server.
Minor sqlError.: 28022
Source : Microsoft SQL Server 2005 Mobile Edition}
Note: rda.submitQuery is executed successfully ..
any ideas
Thanks and regards
Hi,
I have followed the technical artical "Remote Data Access Synchronization with SQL Server 2005 Compact Edition and Visual Basic.NET" to create a sample application.
But when I run debug mode and get an exception unexpected as following as doing rad.pull :
Immediate Window:
A first chance exception of type 'System.Data.SqlServerCe.SqlCeException' occurred in System.Data.SqlServerCe.dll
Message Box
[Contacts]
Code:
Private Sub RADPullButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RADPullButton.Click
Try
VerifyDatabaseExists()
Dim rda As SqlCeRemoteDataAccess
rda = GetRDAObject()
rda.Pull("Contacts", _
"SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers", _
My.Settings.ServerOleDBNorthwindConnectionString, _
RdaTrackOption.TrackingOnWithIndexes, _
"Contacts_Errors")
Catch ex As Exception
MessageBox.Show(ex.ToString())
Finally
Windows.Forms.Cursor.Current = Cursors.Default
End Try
End Sub
Thanks in advance,
JD
Dears,
I'm trying to set up a rda connection through the pocket pc emulator (standalone version 1.0) and my laptop which runs Windows Vista Home Premium. To start up the rda I first need to connect from my emulated device to my laptop which runs IIS 7.0 (complete installation with compatibility toward IIE 6.0). Connection to http://localhost from my laptop is working fine.
I start the emulator (Pocket Pc with Windows Professional) and cradle the emulated device.
Connection starts and I'm able to browse from my pc the content of the emulated device or to synchronize it.
Then I run Internet Explorer on the emulator and try to connect to http://mycomputername (correct) but I receive a message which says that it cannot connect to the page I was looking for because connection was lost.
Any suggestion on how to solve this issue?
Kind regards and many thanks in advance
Cristian
It seems that now I can connect to http://mycomputername and I'm able to browse the net with my pocket pc emulator.
Anyway when I'm attempting to connect to htpp://mycomputername/subfolder/sqlcesa30.dll (the path is correct, I receive the following error message: "The page cannot be displayed or downloaded because the connection was lost. Check the connection and try later"..which is the same message I've been receiving before)
What shall I do?
When calling the method below, if I use the SQL in red, the Pull method populates my data correctly. But, If I use the sql in Green, I get an errror message. I have set breakpoints and un the SQL that is returned from the sql statement is green, and it returns records. What gives? Are Joins not allowed?
public void GetDiagnosisList()
{
// Connection string to SQL Server 2000
string rdaOleDbConnectString = "Provider=sqloledb; Data Source=WORKPC;Initial" +
" Catalog=database;User Id=username;Password=password";
// string SQLGet = "SELECT tblLUDiagnosis.strDiagnosisCode, tblLUDiagnosis.strDiagnosisDesc FROM tblLUDiagnosis" +// " INNER JOIN tblPatientEpisode ON tblLUDiagnosis.strDiagnosisCode = tblPatientEpisode.strPrimaryDiagnosis" +// " WHERE tblPatientEpisode.intHospitalID =" + intHospitalID;
string SQLGet = "SELECT TOP 15 tblLUDiagnosis.strDiagnosisCode, tblLUDiagnosis.strDiagnosisDesc FROM tblLUDiagnosis";
SqlCeRemoteDataAccess rda = new SqlCeRemoteDataAccess();
try
{
rda.InternetUrl = "http://WORKPC/SQLCE/sscesa20.dll";
rda.LocalConnectionString = "Provider=Microsoft.SQLSERVER.OLEDB.CE.2.0;" + CONN_STRING;
rda.Pull("tblLUDiagnosis",SQLGet,rdaOleDbConnectString, RdaTrackOption.TrackingOnWithIndexes, "ErrorTable");
MessageBox.Show("Diagnosis Synchronized");
}
catch(Exception ex)
{
MessageBox.Show(ex.Message);
}
}
Hello,
i have one publisher with one pull subscription. when i make any change in publisher, that change is propegated to subscriber, but when i make any change in subscription, the change is not reflected. i have tried a lot of options but no one worked. please help me.
Regards,
[SQL Everywhere CTP],[VS2005]
RDA.Pull method is not doing anything for me from a VSTO 2005 Outlook addin project. I have IIS & SQL Server 2005 running on my develpoment pc. I am using Integrated Windows Auth for vdir. It just stops execution at the line of code that calls RDA.Pull & doesnt return any tables nor throws an error. I have no idea where I am going wrong. I have tried using table names that dont exist in the .sdf too.
SqlCeRemoteDataAccess rda = new SqlCeRemoteDataAccess();
rda.InternetUrl = @"http://localhost/WsRDA/sqlcesa30.dll";
rda.LocalConnectionString = @"Data Source=D:\_fullPahtHereDBEverywhere.sdf;Password=sdfPwdHere";
rda.InternetLogin = "myLocalUserName";
rda.InternetPassword = "myLocalPassword";
rda.Pull("Class2", "select * from dbo.Class", @"Data Source=MyDesktopSQL2K5;Initial Catalog=ServerDB;Integrated Security=SSPI");
Without an error msg, I dont know what the problem is. Any ideas?
Can someone please help me with this?
I need a query that will pull clients that made payments last year but not this year.
I need the query to use date parameters so I can select any date range for the past year and the current year.
I have listed the tables and fields that might be needed: I'm hoping to do this without temp tables.
Date range is based on the tblPaymentReceipts.PaymentDate
tblClients, ClientID
tblPayment, PmtID, ClientID, Paystartdate, Paygroup
tblPaymentReceipts, PmtRcptID, PmtID,CleintID,PaymentDate,PaymentAmount
Hi,
Writing a report that displays total hours, etc for each day in a given month and I'm having trouble comking up w/ an elegant solution. Tables are set up like this:
table1 (id, start_date,end_date,submitter)
table2( id,table1_id,start_time,end_time, etc)
Each record in table2 is a child to a parent record in table1 and there may be multiple children for each parent. The "start_time" and "end_time" fields are datatype "datetime" and are stored with actual times (not 12:00:00 AM"). I need the report to display the values for each day in a gridview, etc so I can act upon them from the "RowDataBound" sub (more math, etc). The problem that I am running into is that for records that have multiple children for a given day, I need to sum those results and display the summed data as a single row within the GV - can't seem to work that out - I keep getting every child record displaying as its own row in the GV.
Any thoughts? I'm sure it's probably fairly simple but I am still a beginner...thanks as always
I want to pull ALL users from Table1 and include information that person may have in Table2. As of now, it is only including users that have something in Table2. How do I include everyone?
Thanks
hi,
I want to setup transactional replication(PULL) between 2 servers .
can anyone guide me with the steps involved while performaing a Pull replication from server1 to server2.
Any help appreciated.
When doing a pull subscription where the schema is also replicated, the snapshot fails with the message " The process could not create the file
[machine name]D$MSSQL7ReplDataunc[Publisher Name]DateTable Name.sch
There is an OS Error Code of 5 saying Acces is denied.
The file mentioned above is created, so perhaps it fails trying to create a file for the next table.
Thanks for any light that you can shed!
Bill
Could someone please help me? I am trying to pull in a partial string (the last six characters of the field, to be exact).
This is an example of my code:
select *
into #temp_2
from #temp_1 a, Server2.DBa.dbo.table2 r
where r.field1r = a.field1a and
r.field3r = a.field3a (field3a is where I need just the last 6 characters)
To be more specific:
r.field3r looks like 000884
a.field3a looks like 17445000884
So- I just want to pull in the 000884 off of a.field3a
Hi there all
I have a problem creating a pull merge subscription on a server that's outside of our firewall. All standard ports are blocked so MS UNC connections are not possible which SQL 2000 uses by default when creating a subscription. Equally FTP is out = insecure.
I found a procedure to that said create the snapshot of the publication, create a backup of the published database, restore that backup to the remote server as a subscription db and then sync using merge. Didn't work, failed (several times).
Can anyone enlighten me as to what I'm doing wrong or indeed if I'm doing anything correctly!
I can create a remote desktop (Term Server) connection to the remote and another back to the publisher (from the subscriber's desktop) and both connections are using SSH tunnels. SQL Server uses a non standard port to communicate over the firewall. The remote server sits behind another firewall/router with port redirection to it's private address. Each server has the other registered and there are no comms problems and indeed there are other replicated dbs between them.
Both servers are win 2003 and the remote (subscriber) is R2 version, both with SQL 2000 Server Std patched up to SP3. (if this has any bearing on the solution which I presume there is)
Many thanks for listening and I hope a few of you can answer as well
Craig
Hi All,
I have a problem,
I need to copy a large amount of data from one table and insert it into another table.
The design of the destination table is exactly the same as the source table except for the fact that it has one extra field.
Can I copy; in a single SQL statement; all rows in one table (that match given criteria) into another table allowing for the extra field?
Hello,
How can I create a query that pulls all records for a given ID (road) where the distances (based on start & end fields) overlap?
Eg. RoadNm Start End
Road 1 0 500
Road 1 300 800
Road 2 0 500
Road 2 500 800
I need to write SQL that flags Road 1 as a road with overlapping sections (whereas Road 2 is fine).
Thanks!
Amber
I have a report that shows all the jobs for a given resource. i.e. there are three jobs waiting to be run through the CNC Machine resource. Each job has more than one resource so I use a filter to get information for just that resource. i.e. just 3 lines for the CNC Machine. However on the report I need to put the resource_id that the job just came from and resource_id for where the job is going next. I still just want 1 line per job.
View 7 Replies View RelatedCan anyone help with how to recreate a pull subscription replication job after I had to recreate the msdb database when it was marked as suspect. I still have the subscription but cannot seem to recreate a pull replication job
View 1 Replies View RelatedI am new to SQL, as old as it is. I am not new to programming Inormally just use Access.I have two tables for a little project manager I made. After updates Isent an email to the user. I need to populate the user based on the"Assigned To" field I use, but I only log the username and not theemail address. Is there a way to associate the "Assigned To" to theUser's account in the "User" table so that I can pull thier emailaddress through code?ThanksChuck
View 5 Replies View Related