I am looping through all the databases for a table and trying to insert data into two columns in that table. So evrything seems right. but when i run the program it says
Msg 515, Level 16, State 2, Line 4
Cannot insert the value NULL into column 'OrganizationID', table 'DesMoines_DEV.dbo.Organization'; column does not allow nulls. INSERT fails.
I think writing a dynamic query that produces a series of insert statements is wrong... Instead a dynamic query that execute insert statements one by one may work... But I couldn't figure how to approach..
Below is the code
SET @dbLoop = CURSOR FOR
SELECT name
FROM sys.Databases
WHERE name NOT IN ('master','model','msdb','tempdb')
AND State_desc = 'ONLINE'
I have a bulk insert situation that would be nice to be able to pull off. I have a flat file with 46 columns that are to go into a table. The table, I want to have a 47th column to be updated later on by means of a stored proc saying if the import into the system was sucessful or not. I have the rowterminator set as '"' thinking that would tell SQL to begin on the next row, leaving the importstatus column null but i still receive an error.
First of all, is this idea possible within this insert statement. Secondly, if so, what would be the syntax to tell the insert statement to skip that particular column. It is the last column listed in the table so it just needs to start on the next row after it inserts the last bit of data in the flatfile.
If this is not possible, is it possible to bulk insert into a temp table?
So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:
In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID
I am trying to create a table such as shown below:
This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.
For e.g
Select Test_Name AS 'Test_Name', Table_Bird.Animal AS 'Birds', Table_Mammal.Animal AS 'Mammal', Table_Reptile.Animal AS 'Reptile, Table_Fish.Animal AS 'Fish' From Table_One
[Code] .....
The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.
I just created a new table with over 100 Columns and I need to populated just the first 2 columns.
The first columns to populate is an identify column that is the primary key. The second column is a foreign_key to an other column and I am trying to populate this columns with all the values from the foreign_key value. This is what I am trying to do.
column1 = ID column2= P_CLIENT_D
SET IDENTITY_INSERT PIM1 ON
INSERT INTO PIM1 (P_CLIENT_ID) SELECT Client.ID FROMP_Client
So I am trying to insert both an identity values and a value from an other table while leaving the other columns blank. How do I go about doing this.
I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:
I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.
1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.* FROM PRODUCT A CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B
If updated my query (see below) and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.
2. My second question: How to i get around this error?
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.* FROM PRODUCT A CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B, fnSplitJson2(A.ITEM6,NULL) C
I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.
I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)
I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !
Below is the code i have at the moment
declare @startdate as datetime declare @enddate as datetime declare @Line as Integer DECLARE @count INT
set @startdate = '2015-01-01' set @enddate = '2015-01-31'
My requirement is below.enhancing the T- sql query as I was told not to use SSIS.
Insert data from Table A to Table B with conditions:
1. Truncate gender to one character if necessary.
2. Convert character fields to uppercase as necessary.
3. For systems that supply both residential and mailing addresses, use the residential address if available (both street_address and zip fields have value), mailing address otherwise.
In SSIS I took conditional split with 'ISNULL(res_street_address) == TRUE || ISNULL(res_zip) == TRUE '
default outputname :Consider Res Address; Outputname:Consider mail address.
and mapped as:
(Table A) mail_street_address---street address(Table B)
(Table A) mail_city----------------City(Table B)
(Table A) mail_Zip----------------Zip(Table B)
(Table A) mail_state-------------state(Table B)
(Table A) res_street_address--street address(Table B)
(Table A) res_city---------------City(Table B)
(Table A) res_Zip----------------Zip(Table B)
(Table A) res_state--------------state(Table B)
I want to do the same with T-sql code too:
I came up with below T-SQl but unable to pick(street,city,state,zip columns as I have take combination of street and zip from Table A not individual columns as I wrote in below query) based on above condition(3):
Insert into TABLE B SELECT Stats_ID ,UPPER(first_name) first_name ,UPPER(middle_name )middle_name ,UPPER(last_name) last_name ,UPPER(name_suffix) name_suffix
Hi, I´m trying to bulk insert files that looks like this:
aaaa,bbb,dddd, ccc,dfd,tghj,
each file can have up to 10 data fileds per line, and each file will have same number of data fileds in particular file, let´s say 3 like above. Second file could have let´s say 10 and that is maximum.
I read the file and insert data with fieldterminator in temp table from witch I insert data to other tables regarding some parameters inside.
Now problem is: Msg 4832, Level 16, State 1, Line 1 Bulk load: An unexpected end of file was encountered in the data file. Msg 7399, Level 16, State 1, Line 1 The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error. Msg 7330, Level 16, State 2, Line 1 Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
That is because I´m trying to insert 3 fields of data in temporary table which is made of 10 columns (It have to be 10 because next file could have 10 fileds of data). If the temp table has same number of columns like text file has data fields than it works.
What is solution for this problem? Can I bulk insert NULL in columns for which I don't have data?
I can also import each line of text file to one column (with delimiter inside) but than I don´t know how to insert that data to correct tables or even to one table but to seperate data fields to columns with fieldterminator which is , in this case.
I'm new to SQL and I would apriciate any help. Thank you
I would like to compare values in the same table and get the single record with different values in the multiple columns.For table tab1, ID is my key column. If type1 is active (A) then i need to update X else blank on Code1 column and if type2 is active (A) then i need to update X else blank on code2 column. Both type1 and type2 comes from same table for same ID..Below is the example to understand my scenario clearly....
declare @tab1 table (ID varchar(20), dt date, status varchar(1), type varchar(10)) insert into @tab1 values ('55A', '2015-07-30', 'A', 'type1') insert into @tab1 values ('55A', '2015-07-30', 'C', 'type2') insert into @tab1 values ('55B', '2015-07-30', 'C', 'type1') insert into @tab1 values ('55B', '2015-07-30', 'A', 'type2')
I am trying to insert values in a single table with four columns from 4 different sources. is it possible to run these 4 insertions in parallel. all these insertion are independent of each other
On my site users can register using ASP Membership Create user Wizard control. I am also using the wizard control to design a simple question and answer form that logged in users have access to. it has 2 questions including a text box for Q1 and dropdown list for Q2. I have a table in my database called "Players" which has 3 Columns UserId Primary Key of type Unique Identifyer PlayerName Type String PlayerGenre Type Sting
On completing the wizard and clicking the finish button, I want the data to be inserted into the SQl express Players table. I am having problems getting this to work and keep getting exceptions. Be very helpful if somebody could check the code and advise where the problem is??
To match the answers to the user I get the UserId and insert this into the database to.protected void Wizard1_FinishButtonClick(object sender, WizardNavigationEventArgs e) { SqlDataSource DataSource = (SqlDataSource)Wizard1.FindControl("InsertArtist1"); MembershipUser myUser = Membership.GetUser(this.User.Identity.Name); Guid UserId = (Guid)myUser.ProviderUserKey;String Gender = ((DropDownList)Wizard1.FindControl("PlayerGenre")).SelectedValue; DataSource.InsertParameters.Add("UserId", UserId.ToString());DataSource.InsertParameters.Add("PlayerGenre", Gender.ToString()); DataSource.Insert();
we can easily load a file into db tables. However, my main concern here is the number of columns in the file. A text file TEXT_1400.txt has 1400 columns. I am unable to load data to my db table using BCP or BULK INSERT commands, as maximum of 1024 columns are allowed per table in SQL Server 2008.
We can still go ahead and create ‘Wide Table’ (a special table that holds up to 30,000 columns. The maximum size of a wide table row is 8,019 bytes.). But when operating on wide table, BCP/BULK INSERT commands still fail. After few hours of scratching my head over BCP and BULK INSERT, I observed that while inserting BCP/BULK INSERT commands are unable to identify SPARSE columns and skip these columns, which disturbs column mapping and results in data conversion and trancation errors.
Is there any proper way to load this kind of files into the db table?
I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.
Thanks in advance,
Scott Chang
///////////--SQLQueryCroomLabData.sql--/////////////////////////// USE MyDatabase GO CREATE TABLE dbo.LabResults (SampleID int PRIMARY KEY NOT NULL, SampleName varchar(25) NOT NULL, AnalyteName varchar(25) NOT NULL, Concentration decimal(6.2) NULL) GO --Inserting data into a table INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration) VALUES (1, 'MW2', 'Acetone', 1.00) VALUES (2, 'MW2', 'Dichloroethene', 1.00) VALUES (3, 'MW2', 'Trichloroethene', 20.00) VALUES (4, 'MW2', 'Chloroform', 1.00) VALUES (5, 'MW2', 'Methylene Chloride', 1.00) VALUES (6, 'MW6S', 'Acetone', 1.00) VALUES (7, 'MW6S', 'Dichloroethene', 1.00) VALUES (8, 'MW6S', 'Trichloroethene', 1.00) VALUES (9, 'MW6S', 'Chloroform', 1.00) VALUES (10, 'MW6S', 'Methylene Chloride', 1.00 VALUES (11, 'MW7', 'Acetone', 1.00) VALUES (12, 'MW7', 'Dichloroethene', 1.00) VALUES (13, 'MW7', 'Trichloroethene', 1.00) VALUES (14, 'MW7', 'Chloroform', 1.00) VALUES (15, 'MW7', 'Methylene Chloride', 1.00 VALUES (16, 'TripBlank', 'Acetone', 1.00) VALUES (17, 'TripBlank', 'Dichloroethene', 1.00) VALUES (18, 'TripBlank', 'Trichloroethene', 1.00) VALUES (19, 'TripBlank', 'Chloroform', 0.76) VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51) GO //////////Parse/////////// Msg 102, Level 15, State 1, Line 5 Incorrect syntax near '6.2'. Msg 156, Level 15, State 1, Line 4 Incorrect syntax near the keyword 'VALUES'. ////////////////Execute//////////////////// Msg 102, Level 15, State 1, Line 5 Incorrect syntax near '6.2'. Msg 156, Level 15, State 1, Line 4 Incorrect syntax near the keyword 'VALUES'.
I'm trying to insert data into a table from two tables into a single table along with a hard coded value.
insert into TABLE1 (THING,PERSONORGROUP,ACCESSRIGHTS) VALUES ((select SYSTEM_ID from TABLE2 where AUTHOR IN (select SYSTEM_ID from TABLE2 where USER_ID =('USER1'))),(select SYSTEM_ID from TABLE2 where USER_ID =('USER2')),255)
I get the following-
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
TableName: EmployeeCloumns: EmployeeID EmployeeName If I do "Select * From Employee", is there a way to do something like this... Loop through each result IterateThroughControls.ID &= dbTable & dbColumnName & "<br />"EndSo that the end result would assign ID values...EmployeeEmployeeIDEmployeeEmployeeName
Is it possible to insert data into a table from a temporary table that is inner join? Can anyone share an example of a stored procedure that can do this? Thanks, xyz789
Hi, I am having 2 tables. One is main table and another is history table. Whenever I update the main table, I need to insert the all the main table data to History table, before updating the main table. Overall it is like storing the history of the table updation. How do i write a stored procedure for this? Anybody has done this before? Pls help me.
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
I am looking solutions to import csv data into my SQL database table. BUT we want to collect the data from specific columns in the csv file, (NOT the whole csv file) into SQL Database Table.
I had a function like below :Public Sub Getdata2(ByVal query, ByVal db, ByVal name) Dim selectSQL As StringDim con As SqlConnection Dim cmd As SqlCommand Dim reader As SqlDataReader Trycon = New SqlConnection("User ID=xxx;password=xxx;persist security info=True;Initial Catalog=database1;Data Source=xxx.xxx.xxx.xxx.xxx,xxxxx;") Dim username As String username = Request.QueryString("username") selectSQL = "SET DATEFORMAT DMY;Insert into table1(hse_num, st_name, proj_name, unit_num, postal, n_postal, flr_area, flr_sf, flr_rate, flr_ra_sf, land_area, land_sf, land_rate, lnd_ra_sf, prop_code, cont_date, title, sisv_ref, r_date, rec_num, source, username, DGP, Remarks, Sub_Code, caveat, consider, age) select hse_num, st_name, proj_name, unit_num, postal, n_postal, flr_area, flr_sf, flr_rate, flr_ra_sf, land_area, land_sf, land_rate, lnd_ra_sf, prop_code, cont_date, title, sisv_ref, r_date, rec_num, source, '" & username & "', DGP, Remarks, Sub_Code, caveat, consider, age from [yyy.yyy.yyy.yyy,yyyy].database2.dbo.table2 where " & querycmd = New SqlCommand(selectSQL, con) con.Open() reader = cmd.ExecuteReader() lbl.Text = selectSQLCatch ex As Exception lbl.Text = ex.Message Finally If (Not con Is Nothing) Then con.Close() con.Dispose() End If End Try End Sub '------------------------------------------------------------------------------------------------------------------------------------------------------------------------- May i know that how do i retrieve data from [yyy.yyy.yyy.yyy,yyyy].database2.dbo.table2 due to diffrent server, diffrent UID and Password
IF (SELECT OBJECT_ID('t1')) IS NOT NULLDROP TABLE t1GOCREATE TABLE t1 (c1 INT, c2 INT)DECLARE @n INTSET @n = 1WHILE @n <= 454BEGININSERT INTO t1 VALUES (@n, @n)SET @n = @n + 1ENDSELECT name, indid, CASE indidWHEN 0 THEN 'Table'WHEN 1 THEN 'Clustered Index'ELSE 'Nonclustered Index'END AS Type,dpages, rowcntFROM sysindexesWHERE id = OBJECT_ID('T1')name indid Type dpages rowcnt---- ----- ---- ------ ------NULL 0 Table 2 454I have a table containing 454 rows of two columnsof type INT with each being 4 bytesc1 int = 4 bytes+c2 int = 4 bytes=8 bytes per rowIf I entered 454 rows : 454 * 8 = 3,632 byteseach SQL Page is 8KB = 8 * 1024 bytes= 8,192 bytesa data page header takes the first 96 bytesleaving 8096 bytes for data and row offsets.Each record uses a row offset at the end of the pageconsisting of 2 bytes. 454 * 2 = 908 bytes.8096 - 3632 - 908 = 3,556 bytes. Should this befree data bytes?For a heap table, does SQL add an internal uniqueidentifiercolumn also? or my question is when does SQL adda uniqueidentifier? I am reading Inside SQL 2000 andtrying to understand a few things.A uniqueidentifier of 4 bytes gets added when a clustered indexexists but it is NOT a UNIQUE clustered index. AND onlyif duplicate record is added those two records only geta uniqueidentifier value.But in my example it's a heap table with no indexes. Evenon a heap table with no indexes a ROWID or Uniqueidentifierget added? Based on the INSERT statement above allvalues are unique.So what am I missing to understand why 453 rowsmake one data page to be used whereas 454 rowsmake two data pages to be used?Thank you
My Input is a flat file source and it has spaces in few columns in the data . These columns are linked to another table as a foreign key and when i try loading them in a relational structure Foreigh key violation is occuring , is there a standard method to replace these spaces .
what approach should i take so that data gets loaded in a relational structure.
for example
Name Age Salary Address dsds 23 fghghgh
Salary description level 2345 nnncncn 4
here salary is used in this example , the datatype is char in real scenario
what approach should i take to load the data in with cleansing the spaces in ssis
Hello, I have a table called #table1 which is populated as in the example below. I would like to write a selectinsert statement based on #table1 that populates #table2 like in the #table2 example. Note #table2 is a fixed table that follows the structure below.
Can any of you T-SQL gurus help me with my problem? Any help will be most appreciated. Thanks
Insert into #table1 select '012345','2008-04-19 00:00:00.000' , '01', '06', '05', null, null UNION all select '012345','2008-04-20 00:00:00.000' , '01', '07', '05', '07', '03' UNION all select '012345','2008-04-21 00:00:00.000' , '01', '06', null, null, null UNION all select '012345','2008-04-22 00:00:00.000' , '01', '02', '05', '07', null UNION all select '012345','2008-04-23 00:00:00.000' , '03', '06', null, null, null UNION all select '987654','2008-04-21 00:00:00.000' , '19', '21', null, null, null UNION all select '987654','2008-04-22 00:00:00.000' , '01', '02', '05', '16', null UNION all select '987654','2008-04-23 00:00:00.000' , '03', '06', null, null, null
select * from #table1
--This is the table i would like to insert my data into CREATE TABLE #table2 --max of 5 orders in 1 day --it does not matter what date the date order was made the 1st date would appear in dateorder1 and so on... ( custID nvarchar(6), dateorder1 [datetime] NULL, order1_1 nvarchar(2), order1_2 nvarchar(2), order1_3 nvarchar(2), order1_4 nvarchar(2), order1_5 nvarchar(2), dateorder2 [datetime] NULL, order2_1 nvarchar(2), order2_2 nvarchar(2), order2_3 nvarchar(2), order2_4 nvarchar(2), order2_5 nvarchar(2), dateorder3 [datetime] NULL, order3_1 nvarchar(2), order3_2 nvarchar(2), order3_3 nvarchar(2), order3_4 nvarchar(2), order3_5 nvarchar(2), dateorder4 [datetime] NULL, order4_1 nvarchar(2), order4_2 nvarchar(2), order4_3 nvarchar(2), order4_4 nvarchar(2), order4_5 nvarchar(2), dateorder5 [datetime] NULL, order5_1 nvarchar(2), order5_2 nvarchar(2), order5_3 nvarchar(2), order5_4 nvarchar(2), order5_5 nvarchar(2) )
TABLE1 ID Roll Name Amount . . . . . . so on --------------------------------------- 1 2 Alex 500 2 5 Jones 600 3 2 Ales 400
and we have TABLE 2
ID Roll Name Amount . . . . . . . so on
In both the Tables ID Field is Identity Field and rest all the columns are identical in both the tables.I want to perform a query in such a way that SQL Should,
1) Remove all data from TABLE2 First 2) Select those records from TABLE1 where Roll = 2 3) Then, Insert the results to TABLE 2
So we should get the result similar to below:
ID Roll Name Amount . . . . . . . so on --------------------------------------- 1 2 Alex 500 3 2 Ales 400
