Hi all,
I have a table with 4869068 rows and when some one tries to insert the records into this table the database times out....Does any one know what could be the reason and from where do I start debugging.
I have no problem with the disk space?
Thanks,
Venu
I scheduled a Bulk copy operation, and have been getting some inconsistent failures.
Last night the job was set to run every 3 hours, I expect it to take about 1 hour to finish.
The second itteration of the job failed, the first and third ran fine.
Here is the error from DTS
Any suggestions? Is there a better/stable Data Provider for SQL?
... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: DTSStep_DTSBulkInsertTask_1 DTSRun OnError: DTSStep_DTSBulkInsertTask_1, Error = -2147217900 (80040E14) Error string: The statement has been terminated. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147217900 (80040E14); Provider Error: 3621 (E25) Error string: The statement has been terminated. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error: -2147217900 (80040E14); Provider Error: 7399 (1CE7) Error string: OLE DB provider 'STREAM' reported an error. The provider did not give any information about the error. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error: -2147217900 (80040... Process Exit Code 1. The step failed.
Hi,
I'm in an unfortunate situation. We are posting information using a stored procedure to an outside SQL server connected to through a System DSN on our server (win 2003 server) using php's ODBC functions (we never had any luck connecting directly to the SQL server using php's mssql functions).
Everything is working fine, we can connect, send querys, etc ... but between 1am and 10am we recieve errors when trying to execute queries (though we can connect fine).
Whoops ... forgot to get the error returned before it turned 10am ... I can post it tomorrow
I think the database is being locked, but unfortunately I know very little about MS SQL server
The people who's database we are connecting to are not being helpful ... I was hoping I could get some suggestions on what would be the cause.
Anything you can suggest would be a huge help! Thanks!
- Joe
Dear Friends,
I have created a Report (type Tabular) and deployed it on a report server. I am accessing the report via Report Viewer. Now when the report is exported in to pdf format, It gets exported and the pdf also gets created. But at times user is not seeing any data in the PDF even if the Report had data in it.
I am guessing the following may be the reason:
1. Network issues and bytes not received properly
2. Huge load on the Report Server and something have gone wrong.
But I am not able to get the reason why this happens. Anyone who has encountered the problem, please help me.
Thanks,
S Suresh
Log shows this:
Product : OWC11
Error : Error 1311. Source file not found: C:DOCUME~1TOMCUR~1LOCALS~1TempIXP000.TMPSKU0A4.CAB. Verify that the file exists and that you can access it.
--------------------------------------------------------------------------------
Machine : D7NSJK71
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.8003.0
Install : Failed
Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_D7NSJK71_OWC11_1.log
Last Action : InstallExecute
Error String : Source file not found(cabinet): C:DOCUME~1TOMCUR~1LOCALS~1TempIXP000.TMPSKU0A4.CAB. Verify that the file exists and that you can access it.
Error Number : 1311
When the dialog box appeared indicating file couldn't found, there was no option to look elsewhere for it the only option was retry or cancel which after 5 or 6 retries I cancelled. Everything else appears to have installed correctly for this instance.
Also earlier attempts to install have left services for named instances that I cannot install to such as SQLEXPRESS , SQLEXPRESS1 and CURRIEREXPRESS, I long ago had a beta version installed and have attempted numerous methods to completely wipe these out using the uninstallbetas tool from Microsoft as well as a number of suggestions from some posts.
Please help - The most significant reason I'm installing this is to practice creating SQL Reporting Service reports
create proc dbo.usp_CatchAddressException @tableName varchar(500) as
-- alter proc dbo.usp_CatchAddressException @tableName varchar(500) as
begin
set nocount on
declare @sql varchar(700)
-- truncate table tempException
set @sql = 'insert hava_dcde.dbo.STREET_EXCEPTION (id_town, id_voter, pre_value, nbr_exception, date_stamp)
select a.id_town, a.id_voter, substring(a.ad_str1, 1, len(a.ad_str1) - charindex('' '', reverse(a.ad_str1))), ''20'', getdate()
from HAVA_DCDE.dbo.' + quoteName(@tableName)+ ' a
where substring(a.ad_str1, 1, len(a.ad_str1) - charindex('' '', reverse(a.ad_str1))+1) not in
(select nm_street from HAVA_DCDE.dbo.state_streets ss)'
-- and a.id_town = + @tableName
-- print(@sql)
exec(@sql)
set nocount off
end
---------------------------------------------------
when i run this SP 2 times, it will insert the values 2 times.
what should i do if i don't want to insert the same values 2 times?
I'm confussed, Should i use update? any input will be appreciated.
I'm using the following code to add some data to a table:
Dim rand As Random = New Random
Dim num As Int32 = rand.Next(10000000)
Dim strConn as string = "......."
Dim sql as string = "INSERT INTO tblitemid (itemid, userid, datetime, supplier, comment, commenttype, uniqueid) VALUES ('" & label1.Text & "', '" & user.identity.name & "', '"& System.DateTime.Now & "','3763' ,'" & textbox1.text & "' , 'C' ,'" & num & "')"
Dim conn as New SQLConnection(strConn)
Dim Cmd as New SQLCommand(sql, conn)
Try
conn.Open()
Catch SQLExp as SQLException
Response.Write ("An SQL Server Error Occurred: " & e.toString())
Finally
cmd.ExecuteNonQuery
conn.Close()
End Try
As far as I can tell the code works fine. But for some odd reason I click the button, the code execute and the page closes as it should, but the data is never inserted into the database. I cant really seem to pick up on any paterns for why this would be happening. As a rough guess I'd say it doesnt insert the data 1 out of every 5 times or so it seems. Anyone every have any experience with this? Any comments would be helpful, cuz I'm at a loss.
If youd like to see more code let me know....
Thanks,
Scott
Ok, so I have a primary table that contains the count of a linked table. Since I can let the identity update itself, I should be able to insert the same values into the linked child table.
I need to put the same record in the child table 1000 (that's an arbitrary number, this will be programatically determined by the user) times.
I understand that I can do this:
INSERT INTO SomeTable (Cols) VALUES (vals)
GO 1000
However, I can't make this work when doing an ADO.NET ExecuteCmd. It doesn't like the Go 1000 part of it.
Does anyone have an idea how I can do this VERY QUICKLY without having to execute a separate insert for every item (or batch them)?
The number could be as high as 250,000 in the child table.
Thanks!
Hello:
I am supporting a financial application on mssql 6.5,sp4.
Other than at month-end when activiy is high, we have at some unexpected heavy insert activlty as well as deletes at unexpected times. Other than periodically watching 'current activity' or running sp_who2, we aren't sure when this happens and by whom if we don't see it.
Does any one know how I can monitor this unexpected activity?
IS there I can run periodically to trap which spid and/or user who is running such activity?
THanks.
DAvid Spaisman
Hi All,
I have two tables in my database.
I want to insert date and no.of hours worked on that day for a particular project.
So in a week if end user enters 7 dates and hrs for each day......
i have to insert those values into the table against one project only.
Can any one please help me out how to run insert query for 7 times (in a week) with different parameters
Thanks,
Praveen
On my site users can register using ASP Membership Create user Wizard control.
I am also using the wizard control to design a simple question and answer form that logged in users have access to.
it has 2 questions including a text box for Q1 and dropdown list for Q2.
I have a table in my database called "Players" which has 3 Columns
UserId Primary Key of type Unique Identifyer
PlayerName Type String
PlayerGenre Type Sting
On completing the wizard and clicking the finish button, I want the data to be inserted into the SQl express Players table.
I am having problems getting this to work and keep getting exceptions.
Be very helpful if somebody could check the code and advise where the problem is??
<asp:Wizard ID="Wizard1" runat="server" BackColor="#F7F6F3"
BorderColor="#CCCCCC" BorderStyle="Solid" BorderWidth="1px"
DisplaySideBar="False" Font-Names="Verdana" Font-Size="0.8em" Height="354px"
onfinishbuttonclick="Wizard1_FinishButtonClick" Width="631px">
<SideBarTemplate>
<asp:DataList ID="SideBarList" runat="server">
<ItemTemplate>
<asp:LinkButton ID="SideBarButton" runat="server" BorderWidth="0px"
Font-Names="Verdana" ForeColor="White"></asp:LinkButton>
</ItemTemplate>
<SelectedItemStyle Font-Bold="True" />
</asp:DataList>
</SideBarTemplate>
<StepStyle BackColor="#669999" BorderWidth="0px" ForeColor="#5D7B9D" />
<NavigationStyle VerticalAlign="Top" />
<WizardSteps>
<asp:WizardStep runat="server">
<table class="style1">
<tr>
<td class="style4">
A<span class="style6">Player Name</span></td>
<td class="style3">
<asp:TextBox ID="PlayerName" runat="server"></asp:TextBox>
</td>
<td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"
ControlToValidate="PlayerName" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
<tr>
<td class="style5">
<td class="style3">
<asp:DropDownList ID="PlayerGenre" runat="server" Width="128px">
<asp:ListItem Value="-1">Select Genre</asp:ListItem>
<asp:ListItem>Male</asp:ListItem>
<asp:ListItem>Female</asp:ListItem>
</asp:DropDownList>
</td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server"
ControlToValidate="PlayerGenre" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
</table>
Sql Data Source
<asp:SqlDataSource ID="InsertArtist1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" InsertCommand="INSERT INTO [Playerst] ([UserId], [PlayerName], [PlayerGenre]) VALUES (@UserId, @PlayerName, @PlayerGenre)"
ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName %>">
<InsertParameters>
<asp:Parameter Name="UserId" Type="Object" />
<asp:Parameter Name="PlayerName" Type="String" />
<asp:Parameter Name="PlayerGenre" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
</asp:WizardStep>
Event Handler
To match the answers to the user I get the UserId and insert this into the database to.protected void Wizard1_FinishButtonClick(object sender, WizardNavigationEventArgs e)
{
SqlDataSource DataSource = (SqlDataSource)Wizard1.FindControl("InsertArtist1");
MembershipUser myUser = Membership.GetUser(this.User.Identity.Name);
Guid UserId = (Guid)myUser.ProviderUserKey;String Gender = ((DropDownList)Wizard1.FindControl("PlayerGenre")).SelectedValue;
DataSource.InsertParameters.Add("UserId", UserId.ToString());DataSource.InsertParameters.Add("PlayerGenre", Gender.ToString());
DataSource.Insert();
}
I am working with parent child tables and want to populate the primary key on insert so that the user does not have to enter this for each record. Here is my codeInsertCommand="INSERT INTO [Awards] ([UFID], [DateAwarded], [Amount], [AwardingAgency]) Select UFID, @DateAwarded, @Amount, @AwardingAgency from master where GatorlinkName = @LoginName" <InsertParameters><asp:Parameter Name="LoginName" Type="String" /> <asp:Parameter Name="strusername" Type="String" /> <asp:Parameter Name="UFID" Type="String" /> <asp:Parameter Name="DateAwarded" Type="DateTime" /> <asp:Parameter Name="Amount" Type="Decimal" /> <asp:Parameter Name="AwardingAgency" Type="String" /> </InsertParameters> The UFID field is the only field that should be populated from SQL data the others are coming from a form view insert form. When I run an insert I get no error but the insert does not happen. I know that the @LoginName works since I am using this same logic in my select statement. Thanks in advance for your help,Ken
View 3 Replies View RelatedHi all,
Currently we take full database backups nightly for our SQL Server 2000 data warehouse systems. The backups take a very long time over 20 hours and we would like to find a good way to reduce these backup times. How can I change our backup plan to reduce the long backup run times. Data size is 1 TB for our data warehouse database server.
Thanks
If I execute the command ALTER DATASE SET MULTI_USER WITH ROLLBACK IMMEDIATE and there are any connections to the database, the command fails with a "Lock request time out period exceeded." message. If I use SET RESTRICTED_USER, the command succeeds with the following message: "Nonqualified transactions are being rolled back. Estimated rollback completion: 100%." This seems to be a bug.
View 5 Replies View RelatedFor security reasons customer wants to put a SQL database on an encrypted thumb drive (IronKey). Here's the rub though. He wants to be able to work with the data on a workstation. Then, if he takes his laptop out of the office he wants to be able to simply plug that thumb drive into the laptop and fire up SQL on the laptop and use that same database. Procedurally this would work in that the database can be created so that the location is the same from both machine viewpoints, however will the two different SQL instances allow moving the database back and forth like this?
View 9 Replies View RelatedThis is a proc that was working on production 7.0 server but is being tested on a 2000, what's changed?
TIA
JeffP....
Hi
I have C++ Client application writes data using sp in SQL Server.
After inserting more than 150000 records, i am unable to insert data , simply it hangs and no more connection are not allowing.If I close the application, it is working fine. What could be the reason?
Thank in advance
This is a proc that was working on production 7.0 server but is being tested on a 2000, what's changed?
TIA
JeffP....
INSERT INTO ticket_dump_datawarehouse
SELECT Ticket_ID,
ID_Entry_Type,
Region,
Related_Case,
Create_Date,
ID_Service_Center,
ID_Type,
ID_Priority
FROM dump_view
will fill fail >
cannot insert the value NULL into column 'Ticket_ID', table 'capacity_base_tracking.dbo.ticket_dump_datawareho use'; column does not allow nulls. INSERT fails.
The statement has been terminated.
But dump_view does not contain any Ticket_ID columns that have NULL value..
where is the problem
Hi
I have a page that bulkinsert data to my sql server, I build up the bulk insert part like this....
1 sb.Append("Exec p_BulkInsertPDI '<ROOT><PROT>")
2
3 sb.Append("<PDI NID=""" & HiddenField1.Value & """ AID=""" & HiddenField1a.Value & """ MID="" GID="" UID=""" & UserID & """/>")
4
5 sb.Append("</PROT></ROOT>'")The problem I have here is that sometimes the AID value doesn't have any value beacuse on the previous page haven't sent any value to that hiddenfield. So when I try to run this, I get a error message like this... "Conversion failed when converting the nvarchar value 'AID=' to data type int".It would be the best if I could insert Null values if no value have been provided. Is this possible to do? Regards
All,
Trying to format some data before I drop it into a grid. I have this in a stored proc but it fails
CREATE TABLE dbo.tmpSummary ( AE NVARCHAR(50), PRODUCT_LINE NVARCHAR(20), ANNUAL_REV NUMERIC (9), [GRWTH/ACQ] NUMERIC (9), RETENTION NUMERIC (9), CATEGORY NVARCHAR(20)
)
INSERT INTO dbo.tmpSummary ( [AE], [PRODUCT_LINE], [ANNUAL_REV], [GRWTH/ACQ] , RETENTION, CATEGORY)SELECT A.AE, A.PRODUCT_LINE, A.ANNUAL_REV, A.[GRWTH/ACQ], A.RETENTION, B.PRODUCT_CATEGORY AS CATEGORY
FROM tmpSummary A RIGHT OUTER JOIN PRODUCT B On A.PRODUCT_LINE=B.PRODUCT_CATEGORY
I keep getting an error "Invalid Column name CATEGORY" Anyone know why? Thanks
I'm setting up a new 2005 server and bulk insert from a client workstation (using windows authentication) is failing with:
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "\FILESERVERNAMEsharedfolderfilename.txt" could not be opened. Operating system error code 5(Access is denied.).
Here's my BULK INSERT statement (though I'm pretty sure there's nothing wrong with it):
BULK INSERT #FIRSTROW FROM '\FILESERVERNAMEsharedfolderfilename.txt'
WITH (
DATAFILETYPE = 'char',
ROWTERMINATOR = '',
LASTROW = 1
)
If I run the same transact SQL when remote desktopped into the new server (under the same login as that used in the client workstation), it imports the file without errors.
If I use the sa client login from the client workstation (sql server authentication) the bulk insert succeeds.
My old SQL 2000 server lets me bulk insert the file without errors even from my client workstations using windows authentication.
I have followed the instructions on this site: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=928173&SiteID=1
, but still no luck and same error.
I'm pretty sure it is being caused by the increased constraints on bulk insert in 2005. Hoping someone can help. The more specific the better. If you need more info, let me know.
Oh and I've also made sure that the SQL service uses a domain logon account rather than the local system account (this would work on the 2000 server, but not 2005).
Note that the file server (source file resides there) is a DIFFERENT machine than the 2005 SQL server. If I move the source file to the sql server machine the error goes away (not a preferred solution though).
I'm almost positive that what I need to do is make sure that the SQL server is setup for delegation when a windows authenticated user attempts to bulk load a file from a second server.
Can someone provide instructions?
Thanks!
Here is my problem. There is a form where some information has to be filled out while the other does not. Information that is left blank is not inserted into the database so that I don't have millions of empty rows. This works perfectly, keeps the database accurate. When someone goes to update, if they add something new it would need to be inserted, since there is nothing to update. I was going to write a procedure, but that seems like such a waste since this will happen often. Is there an sql command in MS SQL to do this. I tried all of the sql commands from other databases I had used. (I am new to MS SQL). If there isn't one does someone have a procedure that won't create a huge amount of overhead.
A.
Hi,
I am cleaning database backup history as "Delete history if 4 months old" for backup file, and "Delete history if 1 week old" for Log file back.
lets say, I have disaster after 3 months, and I recover database with data and log backup files. Will I be able to recover with 3 month old backup file with just 1 week Log file backup. As I am keeing my Log backups only for 1 week.
Thanks,
I need a trigger (well, I don't *need* one, but it would be optimal!)but I can't get it to work because it references ntext fields.Is there any alternative? I could write it in laborious code in theapplication, but I'd rather not!DDL for table and trigger below.TIAEdwardif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblMyTable]') and OBJECTPROPERTY(id, N'IsUserTable')= 1)drop table [dbo].[tblMyTable]GOCREATE TABLE [dbo].[tblMyTable] ([fldCSID] uniqueidentifier ROWGUIDCOL NOT NULL ,[fldSubject][ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[fldDescription] [ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[fldKBSubject] [ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[fldKBDescription] [ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]GOCREATE TRIGGER PrepopulateKBFieldsFromQuery ON dbo.tblMyTableFOR INSERTASBEGINIF UPDATE(fldKBSubject)BEGINUPDATEtblMyTableSETfldSubject = i.fldKBSubjectFROMinserted i INNER JOINtblMyTable ON i.fldCSID = tblMyTable.fldCSIDENDIF UPDATE (fldKBDescription)BEGINUPDATEtblMyTableSETfldDescription = i.fldKBDescriptionFROMinserted i INNER JOINtblMyTable ON i.fldCSID = tblMyTable.fldCSIDENDEND
View 3 Replies View Related
Hi Folks,
I have been trying to setup distributed views. On two machines I was successful. These machines do not have any domain configured. I was running SQL 2000 Enterprise on both machines with Win2K.
The steps I followed were:
1) Add linked servers
EXEC master.dbo.sp_addlinkedserver @server = 'FED2', @srvproduct = 'SQLServer OLEDB Provider',@provider='SQLOLEDB', @datasrc='WEBSERVER1', @catalog='Federated_Bridge'
2) Add linked servers login
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname='FED2',@useself='False',@locallogin=NULL,@rmtuser='sa',@rmtpassword='mysapwd'
3) Create table
create table Entity_2(id int not null ,EntityID int not null)
go
4) Add Table constraints
ALTER TABLE [dbo].Entity_2 ADD
CONSTRAINT [CK_11] CHECK ([EntityID] <= 10),
CONSTRAINT [PK_Entity_2] PRIMARY KEY CLUSTERED (id,EntityID )
GO
5) Set Xact Abort on
SET XACT_ABORT ON
GO
..The above steps were repeated on two machines. Step 4 was changed so the check constraint did not overlap.
The steps worked. But now I am trying to do the same thing on two different machines. Both are running Win2K and SQL 2000. The only difference that I can see in the setup is that these new machines are setup under a single domain - ie there is a domain controller - whereas in the first case there is no domain controller.
The error message I get is:
Server: Msg 7391, Level 16, State 1, Line 1
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
Please help.
I always got this error when i change the identity key of the table A to yes or no
when i performing an insert into table B and b,accountid is in table A .
seems that when i save, the foreign keys reflect a change of schema...and when i do an insert operation, it fails.
how can i avoid such thinsg to happen? i m using a cursor to load the data and comparing them to see if they are already loaded in the table before inserting them,
ERROR -------------------------------------------------------------------------------------------------------------------------------------------------------------
Msg 16943, Level 16, State 4, Procedure LOADDEPOSIT, Line 167
Could not complete cursor operation because the table schema changed after the cursor was declared.
Hi,
How can avoid SQL to rollback the transaction after an insert fails?. I would like to keep the sucessfully inserted rows and continue with next ones after a single one has failed, and then report the ones that failed.
NOT ATOMIC CONTINUE ON SQLEXCEPTION??
Sorry for such a lame question
Regards,
Hello,
I seem to have a strange problem in that my code runs fine, but I am trying to INSERT rows into a database, and the rows affected by the INSERT command is alwsy zero, even though no error is thrown. Hence no data gets inserted.
Here is the code:
void recordTick(string pair, DateTime time, decimal sell, decimal buy)
{
SqlConnection thisConnection = new SqlConnection("Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\FOREX.mdf;Integrated Security=True;User Instance=True");
insert = "INSERT INTO " + pair + " VALUES(" +
"'" + time.ToString("yyyy-MM-dd HH:mms") + "'," +
"'" + sell.ToString() + "'," +
"'" + buy.ToString() + "'" + ")";
thisConnection.Open();
SqlCommand command = new SqlCommand(insert, thisConnection);
Int32 success = command.ExecuteNonQuery(); // success always = 0!
thisConnection.Close();
}
The database is type .MDF that I created with the Project/Add Component/SQL Database menu. I can inspect it easily in Server Exporer and add data manually with no problem.
Can any one suggest how to get the INSERT to actually add the data?
Any help much appreciated!
Anding
Hi,
I am new to MS DTS and i am using MS SQL 2000 as my database. I am trying to do a Bulk insert using MS DTS package. The package is trying to load data from Text file to a SQL 2000 table. When runninh the package i am getting an error saying that 1 task failed during execution and the task is shown in red colour indicating that the task has failed. Now when i get the details of the error it shows the follows:
Could not bulk insert because the file D:DtsFile.txt could not be opened. Operation system error code: 21 (The device is not ready).
Please help me in solving this problem, if any one has got this error and resolved or have any idea of the error please help. :)
Regards,
Rajeev Prabhu
who still uses the old dblib can help me?
thanks in advance:
1.create table & procedure in db:
test_table(uniqueidentifier a,varbinary50 b)
CREATE PROCEDURE insert_table
@b_in varbinary
AS
insert into test_table(b) values (@b_in)
GO
2.write program use dblib:
wchar_t str[120]=L"ABC";
dbrpcparam(dbproc[i], "@b_in", (BYTE)NULL, SQLVARBINARY,
-1, 6, &str)
3.I can find the program executed successfully,but only 1 Byte is inserted:
a b
-----------------------------------------------
199D71BE-327A-4BC1-AEC8-ACB0C96076CA 0x41
how to insert the whole string into the database?
I ve a simple table with a column of type datetime. I ve successfully inserted the following values in it,
2006-09-13 18:00:10
2006-09-14 18:00:10
2006-09-15 18:00:10
however, it fails when i try to insert the value 0000-00-00 00:00:00. ie., the following insert statement fails
INSERT INTO TEST VALUES('0000-00-00 00:00:00')
The error thrown is,
Server Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value. The statement has been terminated.
I need to import a CSV file to a table and the CSV has an Address field that has a carriage return in it.
Example:
123 Main St.
Anywhere, CO, 99999
I'm working in Windows with SQL Server 2008. What can I do to the CSV file or from within SQL Managment Studio to get the BULK INSERT to work?
Here's my query:
BULK INSERT Contact
From 'C:UsersBrianDownloadsImport-FilteredContact9c.csv'
WITH
(
FIELDTERMINATOR = '|',
ROWTERMINATOR = '
'
)