Insert Into Temp Table
Feb 22, 2004
Hi,
I am trying to insert into temp table multiple times and then pull everything out. How would I do that? I get records back, but everything is 0. Why? Here is my stored procedure.
CREATE PROCEDURE sp_SummaryReport
(
@startdate datetime,
@enddate datetime
)
AS
BEGIN
SET NOCOUNT ON
CREATE TABLE #CalcTemp (DataID bigint IDENTITY(1,1) NOT FOR REPLICATION, ReportType varchar(2), Volume int, NetEffect decimal(10,1), GrossEffect decimal(10,1), WeekEndDate datetime)
DECLARE @OnTime decimal(10,1)
DECLARE @UnControlled decimal(10,1)
DECLARE @Volume int
DECLARE @GrossEffect decimal(10,1)
DECLARE @NetEffect decimal(10,1)
DECLARE @WeekEndDate datetime
--ARS AA
SET @OnTime = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ARSScanType = 'D' AND ARSType='AA')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ARSScanType = 'D' AND ARSType='AA')
SET @Volume = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ARSScanType = 'D' AND ARSType='AA')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblARSData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('AA',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--ARS AN
SET @OnTime = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ARSScanType = 'D' AND ARSType='AN')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ARSScanType = 'D' AND ARSType='AN')
SET @Volume = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ARSScanType = 'D' AND ARSType='AN')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblARSData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('AN',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--ARS AC
SET @OnTime = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ARSScanType = 'D' AND ARSType='AC')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ARSScanType = 'D' AND ARSType='AC')
SET @Volume = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ARSScanType = 'D' AND ARSType='AC')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblARSData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('AC',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--General
SET @OnTime = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ReportType = 'GN' AND ScanType='D')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ReportType = 'GN' AND ScanType='D')
SET @Volume = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ReportType = 'GN' AND ScanType='D')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblShipData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('GN',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--Odessey
SET @OnTime = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ReportType = 'OD' AND ScanType='D')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ReportType = 'OD' AND ScanType='D')
SET @Volume = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ReportType = 'OD' AND ScanType='D')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblShipData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('OD',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--General
SET @OnTime = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ReportType = 'HU' AND ScanType='D')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ReportType = 'HU' AND ScanType='D')
SET @Volume = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ReportType = 'HU' AND ScanType='D')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblShipData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('HU',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
SELECTtblListReportType.ReportType AS 'Report Type',
tblListReportType.ReportID AS ReportID,
SUM(#CalcTemp.Volume) AS Volume,
CAST(SUM(#CalcTemp.NetEffect)/COUNT(#CalcTemp.DataID) as decimal(10,1)) AS 'Net % Effective',
CAST(SUM(#CalcTemp.GrossEffect)/COUNT(#CalcTemp.DataID) as decimal(10,1)) AS 'Gross % Effective'
FROM#CalcTemp
INNER JOIN tblListReportType ON LTRIM(RTRIM(LOWER(#CalcTemp.ReportType))) = LTRIM(RTRIM(LOWER(tblListReportType.ReportAbv)))
GROUP BYtblListReportType.ReportType,
tblListReportType.ReportID
END
GO
View 1 Replies
ADVERTISEMENT
Jul 20, 2005
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies
View Related
Nov 3, 2006
i have temp table name "#TempResult" with column names Memberid,Month,Year. Consider this temp table alredy has some rows from previuos query. I have one more table name "Rebate" which also has columns MemberID,Month, Year and some more columns. Now i wanted to insert rows from "Rebate" Table into Temp Table where MemberID.Month and Year DOES NOT exist in Temp table.
MemberID + Month + Year should ne unique in Temp table
View 8 Replies
View Related
Oct 5, 2015
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary  (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Actual Data
Expected Result
1000
1-Aug
1000
1-Feb
1000
1-Jul
1000
[code]....
View 3 Replies
View Related
May 2, 2006
Hi,
How do I insert data into an existing temporary table? Note: I’m primarily a .NET programmer who has to do T-SQL to grab data from time to time.
What I am trying to do is this:
1) Put the scores for all the people who have completed a questionnaire into a temporary table called #GroupConfidence.
2) Add on a row at the end that gives an average for each score (ie the last row is an average of the column above).
I need my SP to give me a DataSet that I can throw straight to my .NET reporting engine (I don’t want to do any number crunching inside .NET) - that's why I want to add on the 'average' row at the end.
If I do this (below) the temporary table (#GroupConfidence) gets created and the values inserted.
-- Insert the results into the #GroupConfidence table
SELECTRTRIM(UC.FirstName + ' ' + UC.LastName) AS 'FullName',
RP.SubmitID,
RP.GL_Score,
RP.GP_Score,
RP.GPH_Score,
RP.DL_Score,
RP.MP_Score,
RP.Role_MI_Score,
RP.Role_ASXRE_Score,
RP.Role_APRA_Score,
RP.Overall_Score AS 'AllCategories'
INTO#GroupConfidence
FROMRodResultPercentages RP
JOIN#UsersCompleted UC ON UC.SubmitID = RP.SubmitID
My problem is that #GroupConfidence already exists so in fact I have this code below:
CREATE TABLE #GroupConfidence
([FullName] [varchar] (200) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[SubmitID] [int] NOT NULL,
[GL_Score] [decimal](19, 10) NOT NULL,
[GP_Score] [decimal](19, 10) NOT NULL,
[GPH_Score] [decimal](19, 10) NOT NULL,
[DL_Score] [decimal](19, 10) NOT NULL,
[MP_Score] [decimal](19, 10) NOT NULL,
[Role_MI_Score] [decimal](19, 10) NOT NULL,
[Role_ASXRE_Score] [decimal](19, 10) NOT NULL,
[Role_APRA_Score] [decimal](19, 10) NOT NULL,
[AllCategories] [decimal](19, 10) NOT NULL
)
-- Insert the results into the #GroupConfidence table
SELECTRTRIM(UC.FirstName + ' ' + UC.LastName) AS 'FullName',
RP.SubmitID,
RP.GL_Score,
RP.GP_Score,
RP.GPH_Score,
RP.DL_Score,
RP.MP_Score,
RP.Role_MI_Score,
RP.Role_ASXRE_Score,
RP.Role_APRA_Score,
RP.Overall_Score AS 'AllCategories'
INTO#GroupConfidence
FROMRodResultPercentages RP
JOIN#UsersCompleted UC ON UC.SubmitID = RP.SubmitID
So I get this error: Server: Msg 2714, Level 16, State 1, Line 109
There is already an object named '#GroupConfidence' in the database.
Thanks in advance,
Ian.
View 2 Replies
View Related
Apr 11, 2008
Hi Everyone,
I insert data to #temp table by using 'select into'. Then I insert one extra row. when I select data, why it does not follow the order?
(the last insert should be in the last row but it becomes the first row)
Here is the simple script
Select name,code,dates into #temp From member Order By Dates
Insert #temp (name,code,dates)
select 'dave', '0', getdate()
select * from #temp
View 6 Replies
View Related
Nov 3, 2006
i have temp table name "#TempResult" with column names Memberid,Month,Year. Consider this temp table alredy has some rows from previuos query. I have one more table name "Rebate" which also has columns MemberID,Month, Year and some more columns. Now i wanted to insert rows from "Rebate" Table into Temp Table where MemberID.Month and Year DOES NOT exist in Temp table.
MemberID + Month + Year should ne unique in Temp table
View 1 Replies
View Related
Dec 2, 1999
Hi I have the following Stored Proc which works in SQL Server 6.5 but not in SQL Server 7.0. All this Stored Proc does is Create a temp table, execute the DBCC ShowContig on a table and insert the results of the DBCC into a temp table. What am I missing. Thanks.
The code of the Stored Proc is:
/* This Stored Procedure Creates a temp table. (Step 1) */
/* Initializes a local variable @StirngToBeExecuted with */
/* a DBCC command. (Step 2) */
/* Step 3. The Command is Executed and the results of the */
/* DBCC command is inserted into Temp Table. */
/* Step 4. The results of the Temp table are shown on the */
/* Screen. */
/* This SQL Works Fine in SQL Server Version 6.5 */
/* In SQL Server 7.0 the results of the DBCC command is */
/* NOT getting inserted into the Temp table. WHY??? */
IF EXISTS (SELECT * from sysobjects where id = object_id('dbo.Test_sp') and sysstat & 0xf = 4)
drop procedure dbo.Test_sp
GO
CREATE PROCEDURE Test_sp
AS
DECLARE
@StirngToBeExecuted Varchar(100)
CREATE TABLE #temp( -- Step 1
OutputOfExecute Varchar(255)
)
-- Step 2
SELECT @StirngToBeExecuted = 'DBCC SHOWCONTIG (123456789)'
INSERT
INTO #temp exec (@StirngToBeExecuted) -- Step 3
SELECT * FROM #temp -- Step 4
DROP TABLE #temp --Drop the Temp Table
View 2 Replies
View Related
Mar 25, 2014
I use code below to insert data into a temp table.
How many records can insert into a temp table?
Select * into #temp from ORDER
View 3 Replies
View Related
Apr 12, 2006
hello all,this might be simple:I populate a temp table based on a condition from another table:select @condition = condition from table1 where id=1 [this will giveme either 0 or 1]in my stored procedure I want to do this:if @condition = 0beginselect * into #tmp_tablefrom products pinner joinsales s on p.p_data = s.p_dataendelsebeginselect * into #tmp_tablefrom products pleft joinsales s on p.p_data = s.p_dataendTha above query would not work since SQL thinks I am trying to use thesame temp table twice.As you can see the major thing that gets effected with the condictionbeing 0/1 is the join (inner or outer). The actual SQL is much biggerwith other joins but the only thing changing in the 2 sql's is the joinbetween products and sales tables.any ideas gurus on how to use different sql's into temp table based onthe condition?thanksadi
View 5 Replies
View Related
Feb 18, 2004
What's the best way to go about inserting data from several tables that all contain the same type of data I want to store (employeeID, employerID, date.. etc) into a temp table based on a select query that filters each table's data?
Any ideas?
Thanks in advance.
View 6 Replies
View Related
Dec 4, 2015
I'm trying to fill a temp table whose columns are the same as another table plus it has one more column. The temp table's contents are those rows in the other table that meet a particular condition plus another column that is the name of the table that is the source for the rows being added.
Example: 'permTable' has col1 and col2. The data in these two rows plus the name of the table from which it came ('permTable' in this example) are to be added to #temp.
Data in permTable
col1Â Â Â col2
11,   12
21,    22
Data in #temp after permTable's filtered contents have been added
TableName, col1Â Â Â col2
permTable, 11,    12
permTable, 21,    22
What is the syntax for an insert like this?
View 2 Replies
View Related
Sep 15, 2015
How do I do a bulk insert into a temp table from a text file. Text file looks like that:
Â
ver_id TYPE
E57AB326-803C-436E-B491-398A255C919A 58
34D2A601-6BBA-46B1-84E1-3A805FDA3812 58
986E140C-62F1-48F1-B428-3571EBF00DA0 58
My statement looks like this:
CREATE TABLE [dbo].[tblTemp]([ver_id] Â [nvarchar](255), [TYPE] [smallint])Â
GO
BULK INSERT [dbo].[tblTemp]
FROM 'C:v2.txt'
I keep receiving errors.
The error I receive is: Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (TYPE).
View 2 Replies
View Related
Jul 20, 2007
Here is the scenario that I cannot resolve
CREATE TABLE [dbo].[tEvents](
[EventID] [int] IDENTITY(1,1) NOT NULL,
[EventName] [varchar](1000) NOT NULL,
CONSTRAINT [PK_tEvent] PRIMARY KEY CLUSTERED
(
[EventID] ASC
)WITH FILLFACTOR = 90 ON [PRIMARY]
) ON [PRIMARY]
CREATE TABLE [dbo].[tEventSelections](
[EventSelectionID] [int] IDENTITY(1,1) NOT NULL,
[EventID] [int] NOT NULL,
[StatusPID] [int] NOT NULL,
CONSTRAINT [PK_tEventSelections] PRIMARY KEY CLUSTERED
(
[EventSelectionID] ASC
)WITH FILLFACTOR = 90 ON [PRIMARY]
) ON [PRIMARY]
then try this
SELECT e.eventName, es.statuspid
INTO #tmpTable
FROM tEventSelections ES
INNER JOIN tEvents E
ON E.EVentID = ES.EventID
INSERT INTO #tmpTable (eventName) values ('Another One')
DROP TABLE #tmpTable
this causes a null insert issue
(0 row(s) affected)
Msg 515, Level 16, State 2, Line 7
Cannot insert the value NULL into column 'statuspid', table 'tempdb.dbo.#tmpTable___________________________________________________________________________________________________________000000000130'; column does not allow nulls. INSERT fails.
The statement has been terminated.
So how do I allow the null, as the not null is coming from the ES table. But I want to allow the insert to happen without having to create the table first, this code works in SQL 2000 but fails in 2005, inserting all fileds into the insert also has it's own issues as some of the fields are delibertly left blank so in some circumstances the data returned to a grid displays correctly.
This method has been used in quite a lot of stored procedures and will be a nightmare to correct if each has to be edited.
One example of the use of is to return a dataset and then add a row at the bottom which is a sum of all the rows.
Regards
View 20 Replies
View Related
Jul 9, 2015
I have an Excel file with .csv extension . it has on sheet with name Sheet1.
Now, I'm trying to insert this Excel data into one #temp table. I tried with syntax:
----------------
Exec sp_configure 'show advanced options', 1;
RECONFIGURE;
GO
Exec sp_configure 'Ad Hoc Distributed Queries', 1;
RECONFIGURE;
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'AllowInProcess' , 1;Â
[Code] ...
But, I'm getting error:
The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "(null)" reported an error. The provider did not give any information about the error.
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "(null)".
If I'm executing for .xls file this statement is working finr and rows are inserted into #temp table. How to take excel file of .csv extension??
View 3 Replies
View Related
Jul 21, 2015
I have the following UNION ALL query with SELECT INTO @tblData temp table. I would like to confirm if my query is correct.
In my first SELECT statement, I have INSERT INTO @tblData.
Do I need another INSERT INTO @tblData again in my second SELECT statement after UNION ALL?
DECLARE @BeginDate as Datetime
DECLARE @EndDate as Datetime
SET @BeginDate = '7/1/2015'
SET @EndDate = '7/13/2015'
DECLARE @tblData table
[Code] ....
View 3 Replies
View Related
Apr 9, 2014
Below are my temp tables
--DROP TABLE #Base_Resource, #Resource, #Resource_Trans;
SELECT data.*
INTO #Base_Resource
FROM (
SELECT '11A','Samsung' UNION ALL
[Code] ....
I want to loop through the data from #Base_Resource and do the follwing logic.
1. get the Resourcekey from #Base_Resource and insert into #Resource table
2. Get the SCOPE_IDENTITY(),value and insert into to
#Resource_Trans table's column(StringId,value)
I am able to do this using while loop. Is there any way to avoid the while loop to make this work?
View 2 Replies
View Related
Jun 24, 1999
I think this is a very simple question, however, I don't know the
answer. What is the difference between a regular Temp table
and a Global Temp table? I need to create a temp table within
an sp that all users will use. I want the table recreated each
time someone accesses the sp, though, because some of the
same info may need to be inserted and I don't want any PK errors.
thanks!!
Toni Eibner
View 2 Replies
View Related
Mar 15, 2007
In my stored procedure I need to select some data columns and insert them into a #temp tbl and then select the same data columns again using a different from and put them into the same #temp tbl. It sounds like a union, can I union into a #temp tbl?
Any help here is appreciated.
View 4 Replies
View Related
Feb 21, 2001
Does anyone know what permissions are required to run bulk insert to a temp table?
I've got a procedure that creates a temp table and runs bulk insert on it. Only problem is that it seems that only the dbo can run it. Anyone else gets the following error:
"The current user is not the database or object owner of table '#bulk'. Cannot perform SET operation."
Alternatively, does anyone know how to submit a scheduled job as a different user?
I've got my import system set up to create a scheduled job that kicks off right away. The job runs the 1st step which includes a bulk insert. The second step checks if the first step completely failed or not. Works great except that when the user runs the submission procedure, it comes back with that error.
Microsoft's brain-dead bulk insert command....aaargh. Every method around it's design flaws is blocked by another design flaw.
View 1 Replies
View Related
Nov 20, 2007
Hi,
I have follwing union query. I want to put this all in a temp table.
select Store_Id,batchnumber
From
Adjustments where updatedDt between '10/30/2007' and '11/20/2007' and Store_id in(8637 ,8641)
group by Store_Id, batchnumber
Union
select DestinationId,b.batchNumber
from
batch b
inner join Carton C on C.Carton_Id = b.General_ID
inner join Document d on d.Document_Id = c.Document_Id
where b.BatchType = 'Warehouse' and b.TranTable = 'Carton'
and (d.DestinationId in (8637 ,8641) ) and c.UpdatedDt Between '10/30/2007' and '11/20/2007'
Union
select d.DestinationId,b.Batchnumber
From
batch b
inner join Document d
on d.Document_Id = b.General_Id
where b.BatchType = 'TransferIn' and b.TranTable = 'Document'
and (d.DestinationId in (8637,8641) ) and d.UpdatedDt Between'10/30/2007' and '11/20/2007'
Union
select d.SourceId,b.batchNumber
From
batch b
inner join Document d
on d.Document_Id = b.General_Id
where b.BatchType = 'TransferOut' and b.TranTable = 'Document'
and (d.SourceId in (8637,8641) ) and d.UpdatedDt Between'10/30/2007' and '11/20/2007'
order by batchnumber
Kindly advice.
Thanks
Renu
View 2 Replies
View Related
Aug 15, 2005
Hi,I have a sproc with 5 params that takes about 40 seconds to return.But when I Create a Temp table and do aInsert Into #tempExec sproc param1, param2, param3, param4, param5it never returns...any ideas?Thanks,Bill
View 1 Replies
View Related
Oct 24, 2007
Hi ,
I am a newbie and i need to provide access for developer for him to use bulk insert ... on temp tables.
what permission do i need to provide the developer i cannot provide bulkadmin permission to him what are the other ways to provide him the access.
Please help me with this.
View 4 Replies
View Related
May 16, 2015
I am running A View that INSERTS into #Temp Table - On Only Certain Days the INSERT Speed into #tempDB is so slow.
Â
Attached snapshot that shows after one minute so many few records are inserted - and it dosent happen every day somedays its very fast.Â
View 3 Replies
View Related
Feb 11, 2015
i am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it.
--no compilation error.
CREATE PROC testTemp
AS
BEGIN
INSERT INTO #tmp(dt)
SELECT GETDATE()
END
only on calling the proc does this give an execution error
View 3 Replies
View Related
Jul 19, 2012
I don't know if it's a local issue but I can't use temp table or table variable in a PP query (so not in a stored procedure).
Environment: W7 enterprise desktop 32 + Office 2012 32 + PowerPivot 2012 32
Simple example:
   declare @tTable(col1 int)
   insert into @tTable(col1) values (1)
   select * from @tTable
Works perfectly in SQL Server Management Studio and the database connection is OK to as I may generate PP table using complex (or simple) queries without difficulty.
But when trying to get this same result in a PP table I get an error, idem when replacing table variable by a temporary table.
Message: OLE DB or ODBC error. .... The current operation was cancelled because another operation the the transaction failed.
View 11 Replies
View Related
Sep 23, 2015
If on the source I have a new column, the script generated by SqlPackage.exe recreates the table on the background with moving the data into a temp storage. If the table is big, such approach can cause issues.
Example of the script is below: in the source project I added columns [MyColumn_LINE_1]  and [MyColumn_LINE_5].
Is there any way I can make it generating an alter statement instead?
BEGIN TRANSACTION;
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
SET XACT_ABORT ON;
CREATE TABLE [dbo].[tmp_ms_xx_MyTable] (
[MyColumn_TYPE_CODE] CHAR (3) NOT NULL,
[Code] ....
The same script is generated regardless the table having data or not, having a clustered or nonclustered PK.
View 7 Replies
View Related
Oct 25, 2015
I have a temp table like this
CREATE TABLE #Temp
 (
  ID int,
  Source varchar(50),
  Date datetime,
  CID varchar(50),
  Segments int,
  Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.
View 4 Replies
View Related
Jun 6, 2005
Hello,
I am receiving the following error:
Column name or number of supplied values does not match table definition
I am trying to insert values into a temp table, using values from the table I copied the structure from, like this:
SELECT TOP 1 * INTO #tbl_User_Temp FROM tbl_User
TRUNCATE TABLE #tbl_User_Temp
INSERT INTO #tbl_User_Temp EXECUTE UserPersist_GetUserByCriteria @Gender = 'Male', @Culture = 'en-GB'
The SP UserPersist_GetByCriteria does a
"SELECT * FROM tbl_User WHERE gender = @Gender AND culture = @Culture",
so why am I receiving this error when both tables have the same
structure?
The error is being reported as coming from UserPersist_GetByCriteria on the "SELECT * FROM tbl_User" line.
Thanks,
Greg.
View 2 Replies
View Related
Aug 14, 2015
Below is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
View 5 Replies
View Related
Sep 8, 2006
Hello
Is it possible to insert data into a temp table with data returned from a stored procedure joined with data from another table?
insert #MyTempTable
exec [dbo].[MyStoredProcedure] @Par1, @Par2, @Par3
JOIN dbo.OtherTable...
I'm missing something before the JOIN command. The temp table needs to know which fields need be updated.
I just can't figure it out
Many Thanks!
Worf
View 2 Replies
View Related
Sep 17, 2007
In a table-valued UDF, does the UDF use a table variable or a temp table to form the resultset returned?
View 1 Replies
View Related
Nov 23, 2007
Hello guys..
Can u plz help me by giving me an idea how i can copy the temp table data to permanent table
Thanks,
sohails
View 1 Replies
View Related
