I have need to insert records when not in the target table.
sample ddl for source and target tables. Notice the target table is missing the 'Upstairs' Rows:
CREATE TABLE source (
property_id INT,
unit_type VARCHAR(30),
care_type_id VARCHAR(1),
propert_room_type_id INT,
rate MONEY)
[code]....
I am trying to multiple update records in Table B from a single record in Table A. To identify the records that need to be updated I used this:
Select
Table1.cfirstnameas'Table
1 First',Table1.clastnameas'Table
1 Last',Table1.ifamilyid,CR.icontactid,CR.lLiveswithStudent,
Table2.cfirstnameas'Table
2 First',Table2.cLastNameas'Table
2 Last',Table2.ilocationidas'Table
2 Location',Table1.iLocationIDas'Table
1 Location'
fromTable1
JoinTable3
CRonTable1.istudentid=CR.istudentid
JoinTable2
onCR.icontactid=Table2.iContactID
whereCR.lLivesWithStudent=1
andTable1.ifamilyid>0
andTable1.ilocationid<>Table2.iLocationIDandTable1.lCurrent=1
I need to update the ilocationid from Table 1 to all Table 2 records related to Table 1but there is no direct relation from Table 1 to Table 2. I needed Table 3 to make the connection from Table 1 to 2.
Hi... I was hoping if someone could share me some thoughts with the issue that I am having at the moment.
Problem: When I run the package in my local machine and update local SS DB/table - new records writes OK in the table. BUT when I changed my destination meaning write record into another physical SS DB/table there is no INSERT data occurs. AND SO when I move/copy over that same package into another server (e.g. server that do not write record earlier) and run it locally IT WORKS fine too.
What I am trying to do is very simple - Add new records in a SS table using SSIS . I only care for new rows and not even changed rows.
Here is my logic -
1. Create Ole DB source to RemoteSERVER - using SELECT stmt
2. I have LoopUp component that will look for NEW records - Directs all rows that don't find match and redirect rows (error output).
3. Since I don't care for any rows that is matched in my lookup - I do nothing or I trash the rows
4. I send the error rows (NEW rows) into OleDB destination
RESULTS when I run the package locally and destination table is also local - WORKS FINE;
But when I run the package locally and destination table is in another Sserver (remote) - now rows is written.
The package is run thru BIDS manually so there is no sucurity restrictions attached to it.
I am not sure what I am missing. And I do not see error in my package either. It is not failing.
Thanks in advance!
I am trying to insert new records into the target table, if no records exist in the source table. I am passing user specific values for insert, but it does not insert any values, nor does it throw any errors. The insert needs to occur in the LOAN_GROUP_INFO table, i.e. the target table.
MERGE INTO LOAN_GROUP_INFO AS TARGET
USING (SELECT LGI_GROUPID FROM LOAN_GROUPING
WHERE LG_LOANID = 22720
AND LG_ISACTIVE = 1)
AS SOURCE
[Code] .....
On my site users can register using ASP Membership Create user Wizard control.
I am also using the wizard control to design a simple question and answer form that logged in users have access to.
it has 2 questions including a text box for Q1 and dropdown list for Q2.
I have a table in my database called "Players" which has 3 Columns
UserId Primary Key of type Unique Identifyer
PlayerName Type String
PlayerGenre Type Sting
On completing the wizard and clicking the finish button, I want the data to be inserted into the SQl express Players table.
I am having problems getting this to work and keep getting exceptions.
Be very helpful if somebody could check the code and advise where the problem is??
<asp:Wizard ID="Wizard1" runat="server" BackColor="#F7F6F3"
BorderColor="#CCCCCC" BorderStyle="Solid" BorderWidth="1px"
DisplaySideBar="False" Font-Names="Verdana" Font-Size="0.8em" Height="354px"
onfinishbuttonclick="Wizard1_FinishButtonClick" Width="631px">
<SideBarTemplate>
<asp:DataList ID="SideBarList" runat="server">
<ItemTemplate>
<asp:LinkButton ID="SideBarButton" runat="server" BorderWidth="0px"
Font-Names="Verdana" ForeColor="White"></asp:LinkButton>
</ItemTemplate>
<SelectedItemStyle Font-Bold="True" />
</asp:DataList>
</SideBarTemplate>
<StepStyle BackColor="#669999" BorderWidth="0px" ForeColor="#5D7B9D" />
<NavigationStyle VerticalAlign="Top" />
<WizardSteps>
<asp:WizardStep runat="server">
<table class="style1">
<tr>
<td class="style4">
A<span class="style6">Player Name</span></td>
<td class="style3">
<asp:TextBox ID="PlayerName" runat="server"></asp:TextBox>
</td>
<td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"
ControlToValidate="PlayerName" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
<tr>
<td class="style5">
<td class="style3">
<asp:DropDownList ID="PlayerGenre" runat="server" Width="128px">
<asp:ListItem Value="-1">Select Genre</asp:ListItem>
<asp:ListItem>Male</asp:ListItem>
<asp:ListItem>Female</asp:ListItem>
</asp:DropDownList>
</td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server"
ControlToValidate="PlayerGenre" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
</table>
Sql Data Source
<asp:SqlDataSource ID="InsertArtist1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" InsertCommand="INSERT INTO [Playerst] ([UserId], [PlayerName], [PlayerGenre]) VALUES (@UserId, @PlayerName, @PlayerGenre)"
ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName %>">
<InsertParameters>
<asp:Parameter Name="UserId" Type="Object" />
<asp:Parameter Name="PlayerName" Type="String" />
<asp:Parameter Name="PlayerGenre" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
</asp:WizardStep>
Event Handler
To match the answers to the user I get the UserId and insert this into the database to.protected void Wizard1_FinishButtonClick(object sender, WizardNavigationEventArgs e)
{
SqlDataSource DataSource = (SqlDataSource)Wizard1.FindControl("InsertArtist1");
MembershipUser myUser = Membership.GetUser(this.User.Identity.Name);
Guid UserId = (Guid)myUser.ProviderUserKey;String Gender = ((DropDownList)Wizard1.FindControl("PlayerGenre")).SelectedValue;
DataSource.InsertParameters.Add("UserId", UserId.ToString());DataSource.InsertParameters.Add("PlayerGenre", Gender.ToString());
DataSource.Insert();
}
Hi, I am copying records in a table. The source table and the target table are the same. I need the value from the id-field from both the source and target row. Is there a way to do this with one query?
I tried the following, but it doesn't seem to work:
INSERT tableOne (value1, value2, value3)
OUTPUT source.id, inserted.id
SELECT value1, value2, value3 FROM tableOne AS source
WHERE ID = @number
I have a table that holds Customer Part numbers.
Cus_no item_no
100 ABC
100 XYZ
200 ABC
300 XYZ
Looking at the data above. I want look at customer 100 and insert all of customer 100's records where other customers do not match.
Table name ItemCust
After running my script I would expect my data to look like:
Cus_no item_no
100 ABC
100 XYZ
200 ABC
200 XYZ
300 ABC
300 XYZ
Lets say we have two tables
tblPayments (Contains the records of Payments we made)
ID Â Â Â Â DATE Â Â Â Â Â Â Â Â Â AMOUNT Â Â Â Â BANK
----------------------------------------------------------
1 Â Â Â Â Â 05/05/2015 Â Â Â Â 5000 Â Â Â Â Â Â Â Natwest
2 Â Â Â Â Â 05/05/2015 Â Â Â Â 2000 Â Â Â Â Â Â Â Lloyds
3 Â Â Â Â Â 05/06/2015 Â Â Â Â 3500 Â Â Â Â Â Â Â Natwest
4 Â Â Â Â Â 05/07/2015 Â Â Â Â 4000 Â Â Â Â Â Â Â Natwest
5 Â Â Â Â Â 05/08/2015 Â Â Â Â 1500 Â Â Â Â Â Â Â Lloyds
tblReceipts (Contains the records of Receipts we received)
ID Â Â Â Â DATE Â Â Â Â Â Â Â Â Â AMOUNT Â Â Â Â BANK Â
----------------------------------------------------------
1 Â Â Â Â Â 05/06/2015 Â Â Â Â 5000 Â Â Â Â Â Â Â Natwest
2 Â Â Â Â Â 05/06/2015 Â Â Â Â 2000 Â Â Â Â Â Â Â Lloyds
3 Â Â Â Â Â 05/07/2015 Â Â Â Â 3500 Â Â Â Â Â Â Â Natwest
4 Â Â Â Â Â 05/07/2015 Â Â Â Â 4000 Â Â Â Â Â Â Â Natwest
5 Â Â Â Â Â 05/08/2015 Â Â Â Â 1500 Â Â Â Â Â Â Â Lloyds
Now, I also have a blank table (tblBankStatement) which contain the following columns
ID Â Â Â DATE Â Â Â Â Â Â Â Â RECEIPT Â Â Â Â Â Â Â Â PAYMENT Â Â Â Â Â Â Â BANK
-----------------------------------------------------------------------------
I want that when I execute the query, the query should INSERT the records to the New Table (tblBankStatement) from
tblPayments and tblReceipts by Date Ordered in ascending way WHEREBank should be 'Natwest'.
Also the Amount Column Data in tblPayments should be Inserted into the Payment Column in tblBankStatement and the Amount Column Data in tblReceipts should be Inserted into the Receipt Column in tblBankStatement.
So I could get the data just like below
tblBankStatement
ID Â Â Â DATE Â Â Â Â Â Â Â Â RECEIPT Â Â Â Â Â Â Â PAYMENT Â Â Â Â Â Â Â BANK
--------------------------------------------------------------
1 Â Â Â Â 05/05/2015 Â Â Â Â Â Â 0.00 Â Â Â Â Â Â Â Â Â Â Â Â Â 5000 Â Â Â Â Â Â Â Natwest
2 Â Â Â Â 05/06/2015 Â Â Â Â Â Â 0.00 Â Â Â Â Â Â Â Â Â Â Â Â Â 3500 Â Â Â Â Â Â Â Natwest
3 Â Â Â Â 05/06/2015 Â Â Â Â Â Â 5000 Â Â Â Â Â Â Â Â Â Â Â Â Â 0.00 Â Â Â Â Â Â Â Natwest
4 Â Â Â Â 05/07/2015 Â Â Â Â Â Â 0.00 Â Â Â Â Â Â Â Â Â Â Â Â 4000 Â Â Â Â Â Â Â Natwest
5 Â Â Â Â 05/07/2015 Â Â Â Â Â Â 4000 Â Â Â Â Â Â Â Â Â Â Â Â Â 0.00 Â Â Â Â Â Â Â Natwest
What query should I write to perform the task above.         Â
insert into table1 (colname) values (value1)
can only insert one record into the table. How to insert multiple records as value1, value2, value3... into a table?
We can of course use the above repeatedly, but if I don't know how many records (which is a variable), and I want to write a code which just take
value1, value2, value3 ....
from the clipboard, to paste as a input. How to insert those multiple records into table without split it. Thanks
Hi:
I need to create a trigger to save every record which has been updated in a table (e.g. "Contacts") into another (e.g. "Shadow_contacts). So basically something like a versioning on database level.
I have no experience with it and any precise hints/solutions would be very appreciated
selmahan
we have various user defined fields, so when the user insert new value to this field , i want new records (other user field to get populated) be inserted relevant to the inserted value FROM another table (lookup)
This field is a drop down list , after insert committed , i want other user defined field to populate.
Scenario. Drop down is a list of users, after selecting and updating then i want contact details of the above selected user be populated.
CREATE TRIGGER User_Defined_field_KAE
ON [dbo].[AMGR_User_Fields_Tbl]
AFTER
INSERT
AS
INSERT INTO [dbo].[AMGR_User_Fields_Tbl]
(Client_Id,
Type_Id,
name
SELECT
Client_Id,
'1089',
A.USER_PHONE_1
FROM inserted , [dbo].[ADMN_User_Details] as A
WHERE name = a.user_id;
i'm using sql express, management studio express and a visual web developer starter kit.
i have 4 tables: items; categories; categorization; old_items
the old_items table has both the item id and category fields in it, the new db has them separated: items.id; categories.id; categorization.itemId, categorizaton.parentCategoryId, both of which are foreign keys.
i need to get the old_item.id and old_item.category values into the new categorization table but it keeps choking on the foreign keys and i can't get past it. as far as i've been able to figure out so far, i need to turn off the foreign keys to do the insert but i'm not sure and i haven't been able to find any sql query examples that demonstrate it or explain it well enough for my n00b self.
i've read http://msdn.microsoft.com/en-us/library/10cetyt6.aspx, "How to: Disable Foreign Key Constraints with INSERT and UPDATE Statements" but i don't get how that affects it, it seems like one of the other options would actually disable them.
can anyone help? i've been trying all the permutations of queries i can think of and not getting it.
thanks.
hello,
I am new to Slq 2000 Database,Now I create an asp.net application with sql 2000,
in my database I have two 2 table lets' say "OrderHead" and "OrderDetail",they look like this:
OrderHead orderdetail
---order no ----orderno
---issuedate ----itemname
---supplier ----desccription
---amount -----price
----Qty
Now I created a user-defined Collection class to storage order detail data in memory
and bind to a datagrid control.
I can transfer Collection data to xml file ,my problem as below :
There have multiple records data in my xml file,and I want to send the xml file as argument to a store procedure in sql 2000
anyone can give me some advise or some sample code ?
thanks in advanced!
I use code below to insert data into a temp table.
How many records can insert into a temp table?
Select * into #temp from ORDER
Hi
i need to inser the .dbf file records into sql table.
How should i go about it?
regards,
Kiran
Lets say we are executing this query below to retrieve each customer and the amount associated to a tableÂ
"INSERT INTO tblReceiptDue (Dealer, Amount) SELECT CustomerName, SUM(CASE WHEN VoucherType = 'Sales' then Outbound ELSE Â - Inbound END) AS AMOUNT from
tblSaleStatementCustomer  WHERE CustomerType = 'Dealer' GROUP BY CustomerName"
Which display the data like below
DEALER Â Â Â Â Â Â Â Â AMOUNT
------------------------------------------------
ABC Â Â Â Â Â Â Â Â Â Â Â Â Â 2000
XYZ Â Â Â Â Â Â Â Â Â Â Â Â Â 1000 Â Â
However I have one more table TABLE2 which contains two columns
DEALER Â Â Â Â Â Â Â Â OPENING
-------------------------------------------------------
ABC Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 5000
XYZ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 7000
I want to modify my query in such a way that AMOUNT column should also add
OPENING from TABLE2 So that I must get the result like below
DEALER Â Â Â Â Â Â Â Â AMOUNT
------------------------------------------------
ABC Â Â Â Â Â Â Â Â Â Â Â Â Â Â 7000
XYZ Â Â Â Â Â Â Â Â Â Â Â Â Â Â 8000 Â Â
I have a long complicated storeed procedure that ends by returning the results of a select statement or dataset.
I use the logic in other sprocs too.
Can I Isert the returned dataset into a table variable or user table. sp_AddNamesList returns a list of names. For example something like....
INSERT INTO Insurance (Name)
Exec sp_AddNamesList
Thanks,
Mike
I have a table JOBCODE which contains a list of codes.
I want to insert these values into table VIEWS as a list separated by spaces.
E.G.
Table Jobcodes looks like this
code
1
2
3
4
5
6
And I want table Views to look like this:
field1
1 2 3 4 5 6
How do I go about this?
I have a query to insert records into a table based on a request but the query can only read one record at a time. How do i change the query such that it is able to read multiple records. In the below query i was able to input only 1 request which is 149906.
Query
declare @num_of_times int
declare @Count INT
DECLARE @newrequestid varchar(50)
DECLARE @Frequency VARCHAR(25), @RequestId INT, @x INT, @Max INT, @RptDesc INT
SET @RequestId = 149906
SET @x = 1
[Code] ....
I am trying to add multiple records to my table (insert/select).
INSERT INTO Users
( User_id ,
Name
)
SELECT ( SELECT MAX(User_id) + 1
FROM Users
) ,
Name
But I get the error:
Violation of PRIMARY KEY constraint 'PK_Users'. Cannot insert duplicate key in object 'dbo.Users'.
But I am using the max User_id + 1, so it can't be duplicate
This would insert about 20 records.
Why the error?
I am developing an application in vb.net 2005 using SQL Server 2000.
In this I have two tables SessionMaster and SessionChild.
Fields of session master - SessionMastId, Start_Date, End_Date, Session_Type,
Fields of session child - SessionChildId, SessionMastId, UserName, Comment.
SessionMastId and SessionChildId are primary keys of respective tables and also they are auto increment fields.
Please how to write trigger to insert record into both tables at a time.
We are facing a weird scenario in which the snapshot is getting corrupted after insertupdate few million records in to a table .
SQL Server 2012
windows server 2008 R2
service pack 1
64-bit OS
Our system runs a SQL Server 2012 DB, it has a table (table_a) which has over 10M records. Our system have to receive data file from previous system daily which contains approximate 3M updated or new records for table_a. My job is to update table_a with the new data.
The initial solution is:
1 Create a table (table_b) which structur is as the same as table_a
2 Use BCP to import updated records into table_b
3 Remove outdated data in table_a:
delete from table_a inner join table_b on table_a.key_fileds = table_b.key_fields
4 Append updated or new data into table_a:
insert into table_a select * from table_b
As the test result, this solution is very inefficient. Step 3 costs several hours, e.g. How can I improve it?
I’ve got a situation where the columns in a table we’re grabbing from a source database keep changing as we need more information from that database. As new columns are added to the source table, I would like to dynamically look for those new columns and add them to our local database’s schema if new ones exist. We’re dropping and creating our target db table each time right now based on a pre-defined known schema, but what we really want is to drop and recreate it based on a dynamic schema, and then import all of the records from the source table to ours.It looks like a starting point might be EXEC sp_columns_rowset 'tablename' and then creating some kind of dynamic SQL statement based on that. However, I'm hoping someone might have a resource that already handles this that they might be able to steer me towards.Sincerely,
Bryan Ax
Hello I have a Source database and a Target database.
I want to join one table from the source to the other table in the target.
Please can some one write a sql query for this.
i gues its something like
select tablesource.col,tabledest.col
from database..tablesource,database..tabledestination
Ok One more question is where do I execute this Query in which database.. IF at all its possible to this.
Could you tell what's wrong when I split table to the target partition table?USE TEST--ADD FILEGROUP---------------------------------------------------------------------ALTER DATABASE TEST ADD FILEGROUP FG_01ALTER DATABASE TEST ADD FILEGROUP FG_02ALTER DATABASE TEST ADD FILEGROUP FG_03--ADD FILE--------------------------------------------------------------------------ALTER DATABASE TEST ADD FILE (NAME = DF_01,FILENAME = 'D:TESTDF_01.ndf',SIZE = 10MB,MAXSIZE = UNLIMITED,FILEGROWTH = 10MB)TO FILEGROUP FG_01ALTER DATABASE TEST ADD FILE (NAME = DF_02,FILENAME = 'D:TESTDF_02.ndf',SIZE = 10MB,MAXSIZE = UNLIMITED,FILEGROWTH = 10MB)TO FILEGROUP FG_02ALTER DATABASE TEST ADD FILE (NAME = DF_03,FILENAME = 'D:TESTDF_03.ndf',SIZE = 10MB,MAXSIZE = UNLIMITED,FILEGROWTH = 10MB)TO FILEGROUP FG_03--CREATE PARTITION FUNCTION---------------------------------------------------------CREATE PARTITION FUNCTION PF_HIS_HTTP_LOG(datetime)AS RANGE LEFT FOR VALUES ('20070101 23:59:59.997','20070102 23:59:59.997')--CREATE PARTITION SCHEME-----------------------------------------------------------CREATE PARTITION SCHEME PS_HIS_HTTP_LOGAS PARTITION PF_HIS_HTTP_LOG TO ( FG_01, FG_02, [PRIMARY])--CREATE PARTITION TABLE -----------------------------------------------------------CREATE TABLE HIS_HTTP_LOG ( USERID varchar(32) , USERIP varchar(15) ,USERPORT numeric(5,0) , OBJECTIP varchar(15) , OBJECTPORT numeric(5,0) , URL varchar(256) , HOST varchar(64) , DN varchar(64) , VISITIME numeric(5,0) , STARTIME datetime , ENDTIME datetime ) ON PS_HIS_HTTP_LOG(STARTIME)--INSERT DATA，PARTITION 1 20070101-------------------------------------------------DECLARE @i intSET @i = 1WHILE @i <= 100BEGININSERT INTO HIS_HTTP_LOG VALUES(CAST(@i AS varchar(32)),'192.168.1.1',5,'202.103.1.57',6,'www.sohu.com',11,CONVERT" target="_blank">http://sina.com.cn','','www.sohu.com',11,CONVERT(datetime,'20070101 13:25:26.100',121),GETDATE())SET @i = @i +1END--INSERT DATA ,PARTITION 2 20070102-------------------------------------------------SET @i = 1WHILE @i <= 200BEGININSERT INTO HIS_HTTP_LOG VALUES(CAST(@i AS varchar(32)),'192.168.1.1',5,'202.103.1.57',6,'www.sohu.com',11,CONVERT" target="_blank">http://sina.com.cn','','www.sohu.com',11,CONVERT(datetime,'20070102 11:25:26.100',121),GETDATE())SET @i = @i +1END--CREATE A TABLE -------------------------------------------------------------------CREATE TABLE TMP_HTTP_LOG( USERID varchar(32) , USERIP varchar(15) ,USERPORT numeric(5,0) , OBJECTIP varchar(15) , OBJECTPORT numeric(5,0) , URL varchar(256) , HOST varchar(64) , DN varchar(64) , VISITIME numeric(5,0) , STARTIME datetime , ENDTIME datetime ) ON FG_03--INSERT DATA TO TMP_HTTP_LOG 20070103-----------------------------------------------DECLARE @i intSET @i = 1WHILE @i <= 400BEGININSERT INTO TMP_HTTP_LOG VALUES(CAST(@i AS varchar(32)),'192.168.1.1',5,'202.103.1.57', 6,'www.sohu.com',11,CONVERT" target="_blank">http://sina.com.cn','','www.sohu.com',11,CONVERT(datetime,'20070103 09:25:26.100',121),GETDATE())SET @i = @i +1END--ADD CONSTRAINT--------------------------------------------------------------------ALTER TABLE TMP_HTTP_LOGWITH CHECKADD CONSTRAINT CK001CHECK (STARTIME >= '20070103 00:00:00.000' AND STARTIME <= '20070103 23:59:59.997')--SPLIT RANGE ,SWITCH DATA----------------------------------------------------------ALTER PARTITION SCHEME PS_HIS_HTTP_LOG NEXT USED FG_03ALTER PARTITION FUNCTION PF_HIS_HTTP_LOG() SPLIT RANGE ('20070103 23:59:59.997')ALTER TABLE TMP_HTTP_LOG SWITCH TO HIS_HTTP_LOG PARTITION 3--==========================================�======================================Why is the error in step of“ALTER TABLE TMP_HTTP_LOG SWITCH TO HIS_HTTP_LOG PARTITION 3�error infomation：message_id 4972，level 16，severity 1ALTER TABLE SWITCH statement failed. Check constraints or partition function of source table 'TEST.dbo.TMP_HTTP_LOG' allows values that are not allowed by check constraints or partition function on target table 'TEST.dbo.HIS_HTTP_LOG'.Please tell me why ? check constraints ?Thank you very much !
View 1 Replies View RelatedI'd like to figure out how to use the @FieldDescription table below as an intermediate table between the @SourceData and @Stops data.
declare @Stop table (StopId int, UserField varchar(20))
declare @FieldDescription table (Label varchar(10), ColumnName varchar(10))
declare @UpdateSource table (HasPathway varchar(10))
insert into @Stop (StopId, UserField)
values (1, 'Yes')
[code]...
I want to update @Stop.UserField with thevalue from @UpdateSource where @UpdateSource.HasPathway=@Stop.UserField...but I need to use the @FieldDescription table to determine how to map the columns.
I have table A (EmployeeNumber, Grouping, Stages)
and
Table B (Grouping, Stages)
Table A could look like the following where the multiple employees could have multiple types and multiple stages.
EmployeeNumber, Type, Stages
100, 1, Stage1
100, 1, Stage2
100, 2, Stage1
100, 2, Stage2
200, 1, Stage1
200, 2, Stage2
Table B is a list of requirements that each employee must have. So every employee must have a type 1 and 2 and the associated stages listed below.
Type, Stage
1, Stage1
1, Stage2
2, Stage1
2, Stage2
2, Stage3
2, Stage4
So I know that each employee should have 2 Type 1's and 4 Type 2's. I hope that makes sense, I'm trying to change my data because ours is very proprietary.
I need to identify employees who do not have all their stages and list the stages they are missing. The final report should only have employees and the associated missing types and stages.
I do a count by employee to see how many types they have to identify the ones that don't have all the types and stages.
My count would look something like this:
EmployeeNumber Type Total
100, 1, 2
100, 2, 2
200, 1, 1
200 1, 2
So I know that employee 100 should have 2 more Type 2's and employee 200 should have 1 more Type 1 and 2 more Type 2's based on the required list.
The problem I'm having is taking that required list and joining to my list of employees with missing data and pulling from it the types and stages that are missing by employee. I thought I could get a list of the employees that are missing information and right join it to the required list where the missing records would be nulls. But, that doesn't work because some employees do have the required information and so I'm not getting any nulls returned.
I am currently working with C and SQL Server 2012. My requirement is to Bulk fetch the records and Insert/Update the same in the other table with some business logic? How do i do this?
View 14 Replies View RelatedHi,
My scenario:
I have a master securities table which has 7 fields. As a part of the daily process I am uploading flat files into database tables. The flat files contains the master(static) security data as well as the analytics(transaction) data. I need to
1) separate the master (static) data from the flat files,
2) check whether that data is present in the master table, if not then insert that data into the master table
3) If data present then move that existing record to an history table and then update the main master table.
All the 7 fields need to be checked to uniquely identify a single record in the master table.
How can this be done? Whether we can us a combination of data flow items or write a sql procedure to do all this.
Thanks in advance for your help.
Regards,
$wapnil
Having an identity column in target table, how do I use SQL 7 DTS ?
In Import wizard, I chose 'ignore' in source, checked Enable Indenity Insert - DTS failed with a msg like - a column cannot have NULL...
In DTS package, had Fast load and Enable Indenity checked - no luck !
What would be the standard procs for this since this sounds like a very common
senario.
Appreciate your help very much !
-Ivan
I want to replicate a database to a subscriber that will be used as a readonly copy. The data has to be replicated as close to instantly as possible.To do this I set up a database export of objects and data to populate thesubscriber, then I set up transactional replication. To verify thatreplication is working successfully, I count the rows in each table, thereare 3 tables in total. For one of the tables, the replication completes butalmost immediately afterward, the table starts to shrink, and after severalhours the record count is zero. This isn't happening to the other twotables, and I can't figure out why.If you have no idea what might be causing this, perhaps you can suggestsome places to start looking. This is Win2k SP4 with SQL 2000 SP3.Thanks much.
View 1 Replies View RelatedWe need to pull from a table that is named tablename_mmddyy and populate a table with the same format tablename_mmddyy. The date will be different every month so I want to be able to build the tablenames every month. Is there a way to do this in SSIS? Thank you.
View 13 Replies View Related