Insert Row Into Db A From Db B If Not Exist In Db A ...?
Jul 7, 2004
Hi,
I'm completely stuck in here.
I have two tables, for simplicity i'll call them tbl_X and tbl_Y and i'll call the unique key Ukey
I need to create a stored procedure that must be run daily on a scheduled time. When executed, it must compare these two tables and insert rows from tbl_X into tbl_Y when a row exists in tbl_Y but not in tbl_X.
The following code returns the rows that are in tbl_Y, but not in tbl_X:
----------
SELECT Ukey
FROM tbl_X
WHERE NOT EXISTS
(SELECT Ukey
FROM tbl_Y
WHERE tbl_Y.Ukey = tbl_X.Ukey)
----------
But....how do i insert these rows into tbl_X ?
I've tried to declare the tbl_Y.Ukey and use that to do an INSERT statement, but that didn't work out.
Basically, I need to insert the wbs2 and wbs3 where it does not exist in each wbs1.
What I have now will find the values that need to be inserted for a particular project but I don't know how to go through each project and perform the insert:
Select * from PR_template Where Not Exists (Select Wbs1, Wbs2, Wbs3 from PR where PR.WBS2 = PR_Template.WBS2 And PR.WBS3 = PR_Template.Wbs3 and pr.wbs1 = '123-456') Order by wbs2, wbs3 asc
How do I Use the insert code below only if a record does not exist in the cisect table? Then if it exists I just want to
update cisect set ml_desc_0 = cus_type_desc from artypfil_sql A join cisect c on a.cus_type_cd = c.sct_code INSERT INTO [002].[dbo].[cisect] ([sct_code] ,[ml_desc_0] ,[syscreated] ,[syscreator]
I've got an access table with about 2 million rows. I'm using this to update a table in SQL that holds pretty much the exact same data, only with an added Identity column.
From week to week, the access table grows. For example, next week it may have 2.1 millions rows, the week after 2.2 million, etc.
The goal of the DTS is to keep the SQL table up to date w/ the access one. In the past, this has been done by deleting everything from the SQL Table and then importing the ENTIRE access table. This not only takes more time then need be, since the majority of the records *already* existed, but it also threw referential integrity out the door - other tables should be referencing the Identity in the SQL Table. IDEALLY, the only rows that would be transferred from the access file are ones that don't already exist in the SQL table.
I don't want to re-invent the wheel, and have to confess being a little under-schooled on all that SSIS has to offer. Is there a Data Flow Transformation that would solve this?? Any other advice? If all else fails, I'd probably just dump the entire access table to a temp table and then insert vals into the production table that don't exist, but even this would require more temp hard drive space then I'd like.
i need to write a query that insert in A table if and only if the row does not exist already in the table (the source is a select statement). i tried the following:
insert into [A] select * from [B] where Not EXISTS (select * from [A])
table [A] is still empty, but it does not insert any thing! .. what i know is that the EXIST checks if the selected row exists in the subquery, ain't ?
Someone help me out .How to solve the problem.I built a stored procedure in MS SQL 2005 to bulk insert into a table by reading the .txt file. But my stored procedure throws an error. "Could not bulk insert. File ' @PathFileName ' does not exist." My stored given below :- CREATE PROCEDURE [dbo].[ps_CSV_Import] AS DECLARE @PathFileName varchar(2000) ----Step 1: Build Valid BULK INSERT Statement DECLARE @SQL varchar(2000) SELECT @PathFileName="D:Areazone.txt" BEGIN SET @SQL = "BULK INSERT Temp FROM '"+" @PathFileName "+"' WITH (FIELDTERMINATOR = '"",""') " END --Step 2: Execute BULK INSERT statement EXEC (@SQL) --Step 3: INSERT data into final table INSERT mstArea(Description,Refid) SELECT SUBSTRING(Description,2,DATALENGTH(Description)-1), SUBSTRING(RefId,1,DATALENGTH(RefId)-0) FROM Temp --Step 4: Empty temporary table TRUNCATE TABLE Temp Please help me ,if someone have any solution
Im using a store proc in SQL server.I use one table to store my hockey statistics data of each player in the league.When i submit my form i would like to check if there is any sheet of that player that allready exist .. If so then i do update.. if it does not exist i do the insert statement.Here the way i figured it out ! One store proc to do the work of the insert or update. And one to check if the player exist in the statistics table. But i just cant find a way to return a good value from my second store proc. Does my logic make sence ? any ideas ?thank you<code>create procedure Hockey_Player_UpdateForwardStatistics @LeagueID int, @GamePlayerID int, @Games int as declare @PlayerID int @PlayerID = Hockey_CheckPlayerStatistics(@LeagueID, @GamePlayerID) if @PlayerID = 0begininsert into Hockey_PlayerStatistics( Games)values( @Games)end ELSE beginupdate Hockey_PlayerStatistics set Games = @Gameswhere LeagueID = @LeagueID and PlayerID = @PlayerIDend</code>
Hi guys,i have a little problem here.im attempting to write a stored procedure that compares two tables ofthe same data structure and adds (inserts) extra records that exist intable1 to table2.My problem is that i dont have a unique identifier between the tables.i think someone said that i needed to build up a keyany ideas greatly appreciated ??C
Someone help me out .How to solve the problem.I built a stored procedure in MS SQL 2005 to bulk insert into a table by reading the .txt file. But my stored procedure throws an error."Could not bulk insert. File ' @PathFileName ' does not exist."My stored given below :-CREATE PROCEDURE [dbo].[ps_CSV_Import]AS DECLARE @PathFileName varchar(2000) ----Step 1: Build Valid BULK INSERT Statement DECLARE @SQL varchar(2000) SELECT @PathFileName="D:Areazone.txt" BEGIN SET @SQL = "BULK INSERT Temp FROM '"+" @PathFileName "+"' WITH (FIELDTERMINATOR = '"",""') " END--Step 2: Execute BULK INSERT statementEXEC (@SQL)--Step 3: INSERT data into final tableINSERT mstArea(Description,Refid)SELECT SUBSTRING(Description,2,DATALENGTH(Description)-1), SUBSTRING(RefId,1,DATALENGTH(RefId)-0) FROM Temp--Step 4: Empty temporary tableTRUNCATE TABLE TempPlease help me ,if someone have any solution
help on CREATE stored procedure delete and after insert where not exist in one stored procedure in table_B
Code Snippet CREATE PROCEDURE [dbo].[delete_from_table_B] @empID varchar(500) as DELETE FROM table_B WHERE charindex(','+CONVERT(varchar,[empID])+',',','+@empID+',') > 0
---HELP from this ponit how to insert ? after where not exist
IF @@ROWCOUNT > 0
BEGIN
insert into table_B set (empID,ShiftDate,shiftType) where not exist
I am trying to bulk insert a text file into SQL 2005 table. When I execute the bulk insert I get the error
"Msg 4860, Level 16, State 1, Line 1. Cannot bulk load. The file "\ENDUSER-SQLEnduserTextB1020063.txt" does not exist."
The text file that it is saying does not exist I recently created thru my code. I can open the file but only when I rename the file will the Bulk Insert work. After creating the text file I am moving it to the server that SQL server is running on. Also if I run sp_FileExists it also says the file does not exist unless again I rename the file then this stored procedure recognizes the file. I dont' know if I have a permission issue or what is the problem. Any help would be appreiated.
I am using INSERT into Vendors (.....) VALUES (....) form of insert statement. How can I make sure that the insert fails if thie new vendor's vendorname exists? I cannot create a unique index on 'VendorName' column since it is more than 900 bytes and SQL Server will not allow to create index on a column bigger than 900 bytes.
Can I delete the record if it exist before we do an insert at the DataFlow level base on a key of the record we are working on? Basically we want to keep history records and delete and reinsert any records that exist in the table.
My colleague is working on bulk insert task from SSIS and since the data file does not contain any valid delimeter one of the suggestion he got is to use a file format to address the issue. Thus a bcp command is used to generate the format file, as per below.
The file file format was generated, from the data flow we added the BULK INSERT task and set the properties accordingly including the File Format and location of the file. Upon running the task itself we encountered the error as per below.
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load. The file "C:HFISTAT.fmt" does not exist.".
Progress: The Bulk Insert task is completed. - 100 percent complete
Task Bulk Insert Task failed
Have checked the file and it is in C: drive and it is not protected or read-only. Validated the output file and it is as per expected. Any help would be appreciated very much.
I'm inserting from TempAccrual to VacationAccrual . It works nicely, however if I run this script again it will insert the same values again in VacationAccrual. How do I block that? IF there is a small change in one of the column in TempAccrual then allow insert. Here is my query
INSERT INTO vacationaccrual (empno, accrued_vacation, accrued_sick_effective_date, accrued_sick, import_date)
hello friends my one insert code lines is below :) what does int32 mean ? AND WHAT IS DIFFERENT BETWEEN ONE CODE LINES AND SECOND CODE LINES :)Dim conn As New SqlConnection(ConfigurationManager.ConnectionStrings("ConnectionString").ConnectionString) Dim cmd As New SqlCommand("Insert into table1 (UserId) VALUES (@UserId)", conn) 'you should use sproc instead cmd.Parameters.AddWithValue("@UserId", textbox1.text) 'your value Try conn.Open()Dim rows As Int32 = cmd.ExecuteNonQuery() conn.Close()Trace.Write(String.Format("You have {0} rows inserted successfully!", rows.ToString())) Catch sex As SqlExceptionThrow sex Finally If conn.State <> Data.ConnectionState.Closed Then conn.Close() End If End Try MY SECOND INSERT CODE LINES IS BELOWDim SglDataSource2, yeni As New SqlDataSource() SglDataSource2.ConnectionString = ConfigurationManager.ConnectionStrings("ConnectionString").ToString SglDataSource2.InsertCommandType = SqlDataSourceCommandType.Text SglDataSource2.InsertCommand = "INSERT INTO urunlistesi2 (kategori1) VALUES (@kategori1)" SglDataSource2.InsertParameters.Add("kategori1", kategoril1.Text)Dim rowsaffected As Integer = 0 Try rowsaffected = SglDataSource2.Insert()Catch ex As Exception Server.Transfer("yardim.aspx") Finally SglDataSource2 = Nothing End Try If rowsaffected <> 1 ThenServer.Transfer("yardim.aspx") ElseServer.Transfer("urunsat.aspx") End If
I creating disaster recovery plans along with my Y2K testing. As I upgraded from 6.5 to 7.0 on my test server I noticed this sql switch that seems to toggle between the 2 versions. Is this true? Can you run both versions on the same server with a different application running on each?
i need to transfer multiple rows from table1 to table2 but not the duplicated one, anyone help some one told me to use statment where not exists, but i don't know how, i need an example and if there is another solution kindly assist.
I decided to start a new thread for this issue because it is so frustrating. I am hoping someone knows the answer to this specific question.
Why would sql server insist that a database does not exist even though it obviously does exist?
I get the error message: Database 'tf_1' does not exist.
Why would it say it does not exist when it is clearly viewable in SMSS. It attached without problem. I can view the tables in the database. I know it's there; SMSS knows it's there; the VB app I wrote knows it's there. But, when I try to run a query, sql server says it doesn't exist! What gives?
I am receiving an error that the server does not exist, due to this command on my webconfig page. I am using VS 2003. The name of the database I am using does not show up anywhere in this command. Should it? How will it know which server to access my database from? The database is called epscor (see data source). Any clues? Thanks, Steve <sessionState mode="SQLServer" sqlConnectionString="data source=epscor;user id=xxxx;password=xxxxx" cookieless="false" timeout="60"/>
I have created windows userid and i am running my web application using "windows" authentication i have created login id for the windows user id in sql enterprise manager and given access to database. my web.config file has the following connection <appSettings> <add key="connectionstring" value ="Server=APTGsh;Truested-Connection="true"Database="aspnetstore" /> </appSettings> But after this also i am getting the error message" sql server does not exist". It is very difficult to find where the problem is help would be more appericated. i am able to connect to the server using the following syntax <add key="connectionstring" value="server=apt;uid=sa;pwd=ganesh;database=aspnetstore" /> but i am trying is using windows authentication and not forms authentication.
hi, i am posting again because i have not find solution so far... i am using dot net version 1.1. and i am able to make connection throught server explorer.the connection is comming successful on test connection. but when i am putting this object in code behind like SqlConnection1.Open() then it is giving error sql server does not exists. i am not able to connect with following string also con = New SqlConnection(" server=***;database=***;uid=***;pwd=***") con.open while this string is working fine means in my web site this is working live . but when i want to connect to a server which is located in my office then it is not making connection office server - microsoft windows server 2003 while making connection with the same string when i am using dot net version 2.0
We formatted and prepared a new server for production running Win 2003 server. The database is set up for the SQL Server 2000 sp4 I have all permissions set exactly as the staging server and can access that with no problem. I keep getting this error for the prod server: SQL Server does not exist or access denied. Now, I played around with the conn string for the stage server and reproduced the error ONLY when I changed the name to the server to one that did not exist. We are on a local network and can access the new prod server - the sql database via SQL Server Enterprise Manager. The database I created is there and running. I have narrowed it down to it must be something with the server itself. Does IIS need to also be running on the server? The .Net Framework? All permissions are set but is there something else I might check? Thanks, Zath