I am working on a project where I have a page that will have a parent record (Product) and then 1 or more children (options available for the product, user enters text to define) displayed in a table/gridview. There is a relationship defined in the database between the product and options table).
My question is how can I allow the user to add the product info and then within the same page also add the options and only then save it all? The options will added to a table.
Thanks for any help
I have made an SSRS report using the recursive parent functionality to show a hierarchical tree of values. The problem I have is that some children have more than one parent, but because (in order to use the recursive parent nicely) I need to group the results by Id, I only see distinct entries. This means that I only see each child once, even if it "should" appear in multiple locations in the report (under each of its parents).
Include children and exclude children in a single hierarchy in parent child dimension in mdx
*12-parent **20-parent - 9-parent --250-child1 --210-child2 --240-child3 aggregation of 12-parent only aggregation of 20-parent only aggregation of 9 with children
I have the below query which in turn goes in the where clause
Code:
SELECT CASE WHEN EXISTS (SELECT child.id FROM InspectionType parent, InspectionType child WHERE parent.id = child.parentId AND parent.code = 'INSPECTION_TYPE_SAFETY_LIFE' AND parent.zoneId = 10129) THEN (SELECT child.id FROM InspectionType parent, InspectionType child WHERE parent.id = child.parentId AND parent.code ='INSPECTION_TYPE_SAFETY_LIFE' AND parent.zoneId = 10129) ELSE (SELECT id FROM InspectionType WHERE code = 'INSPECTION_TYPE_SAFETY_LIFE' AND zoneId = 10129) END
I am getting below error
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
I tried to solve this problem with If and else but it is not going well with in-clause
Code: select * from InspectionType where id in (select IF EXISTS (SELECT child.id FROM InspectionType parent, InspectionType child WHERE parent.id = child.parentId AND parent.code = 'INSPECTION_TYPE_SAFETY_LIFE' AND parent.zoneId = 10129) BEGIN (SELECT child.id FROM InspectionType parent, InspectionType child WHERE parent.id = child.parentId AND parent.code ='INSPECTION_TYPE_SAFETY_LIFE' AND parent.zoneId = 10129) END ELSE (SELECT id FROM InspectionType WHERE code = 'INSPECTION_TYPE_SAFETY_LIFE' AND zoneId = 10129) )
I am using select * from InspectionType where id in() for illustation only. The sub-query results will go another query
Code: SELECT child.id FROM InspectionType parent, InspectionType child WHERE parent.id = child.parentId AND parent.code ='INSPECTION_TYPE_SAFETY_LIFE' AND parent.zoneId = 10129
This returns more than one row.I know why is the error message but need to achieve this functionality.
I am creating a SSRS report connecting to a cube , Which has geography as Dimension as Hirerarchy ( the Hirerachy consists of Region, Subregion) and a measure , Now this geography dimension is taken as Parameter
when i apply filters i am getting the filter based on Parameter selection , But how can i get the all children under the same parent
As i need to create a graph based on report parameter (ie i should get all the children under the Select parameter parent)
to be more specfic consider this
Region SubRegion
Asia India
Asia Pakistan
Asia Japan
Australia Melborne
Suppose my report parameter is India , I should get all the values under Asia(Parent of india)
I've 2 tables QuestionAnswers and ConditionalQuestions and fetching data from them using CTE join and I'm seeing repetitive rows (not duplicate) like, If you have multiple answers for 1 question, the output is like
where london where paris where toronto
why us why japan why indonesia
I want to eliminate the repetitive question and group them as parent child items.
with cte as ( select cq.ConditionalQuestionID from ConditionalQuestions cq inner join QuestionAnswers qa on cq.QuestionID=qa.QuestionID where cq.QuestionID=5 and qa.IsConditional='Y') select distinct q.Question, a.Answer from QuestionAnswers qa inner join Answers a on a.AnswerID = qa.AnswerID inner join Questions q on q.QuestionID = qa.QuestionID inner join cte c on c.ConditionalQuestionID = qa.QuestionID;
I want to work upon the concept for the first time. The situation is that I have a hotel table, fields are Hotel_ID, Hotel_Name, Hotel_Pic.
What i want is that when user click on the image of the hotel so a separate form or page is open where all the related images of that hotel are displayed in a table format.
I want to know that how to implement this concept? How many tables i would be needing for this.
Hi,I have an application running on a wireless device and being wireless Iwant it to use bandwidth as efficiently as possible. Therefore, I wantthe SQL statement that it uploads to the SQL Server to be as efficientas possible. In one instance, I give it four records to upload, whichcurrently I have as four seperate SQL statements seperated by a ";".However, all the INSERT INTO... information is the same each time, theonly that changes is the VALUES portion of each command. Also, I haveto have the name of each column to receive the data (believe it or not,these columns are only a small subset of the columns in the table).Here is my current SQL statement:INSERT INTO tblInvTransLog ( intType, strScreen, strMachine, strUser,dteDate, intSteelRecID, intReleaseReceiptID, strReleaseNo, intQty,dblDiameter, strGrade, HeatID, strHeatNum, strHeatCode, lngfkCompanyID)VALUES (1, 'Raw Material Receiving', '[MachineNo]', '[CurrentUser]','3/21/2005', 888, 779, '2', 5, 0.016, '1018', 18, '610T142', 'K8',520);INSERT INTO tblInvTransLog ( intType, strScreen, strMachine, strUser,dteDate, intSteelRecID, intReleaseReceiptID, strReleaseNo, intQty,dblDiameter, strGrade, HeatID, strHeatNum, strHeatCode, lngfkCompanyID)VALUES (1, 'Raw Material Receiving', '[MachineNo]', '[CurrentUser]','3/21/2005', 888, 779, '2', 9, 0.016, '1018', 30, '14841', 'B9', 344);Since the SQL statement INSERT INTO portion remains the same everytime, it would be good if I could have the INSERT INTO portion onlyonce and then any number of VALUES sections, something like this:INSERT INTO tblInvTransLog (intType, strScreen, strMachine, strUser,dteDate, intSteelRecID, intReleaseReceiptID, strReleaseNo, intQty,dblDiameter, strGrade, HeatID, strHeatNum, strHeatCode, lngfkCompanyID)VALUES (1, 'Raw Material Receiving', '[MachineNo]','[CurrentUser]', '3/21/2005', 888, 779, '2', 5, 0.016, '1018', 18,'610T142', 'K8', 520)VALUES (1, 'Raw Material Receiving', '[MachineNo]','[CurrentUser]', '3/21/2005', 888, 779, '2', 9, 0.016, '1018', 30,'14841', 'B9', 344);But this is not a valid SQL statement. But perhaps someone with a morecomprehensive knowledge of SQL knows of way. Maybe there is a way tostore a string at the header of the command then use the string name ineach seperate command(??)
I have a package in which, when a Cost Center has X as a value, I must insert not X but many different Y value, which are associated with X. How can I gather and treat those Y values? Only using a Script Component?
Hello, I have problem for insert multiple query for insert in differenr tabels for a single record. I have mail record for candidate and now i wants to insert candiate labour info, candidate passport detail in diff tabel like candidatLabour and candidatePassport, i used two store procedure for it and i write code for it.and it works fine,but i think that if one SP executed and one record inserted but then some problem occure and 2nd SP not executed then........... so plz help me Thanks
I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).
Each row will have the same item, but with a different task type.ie.
i have 2 Tables. i am saying emails in table1 and also if there is any attachments there i saved them also in the same table but with differet ID, and in another table i am saving the relationship of both documents.
Now i have defined another table in which i want to store a single New ID generated by the new Table to email document and it's attachment document..
what i am now doing i just create a SP, and it's take the first record from the main table and check if there is attachments , if no then it's just assign a new ID and save the document id into newly created table, but if there is attachement then it's go to relationship table and returen me the child id on behalf of parent ID and then in the newly created table it save the child docment id with the same id as the parent id has already been saved.
i m doing like this
SELECT all the emails those has attachments..
Insert Into newlyCreated Table (ID,doc)values(1,1)
then SELECT doc from Relationship table where Maintable doc=@doc
Insert into newlycreated tAble(ID,doc)values(1,2)
and so on .. and if i have more then one attachement then i have to use the loop..
what i m looking , is there any short way to do this all, bcoz it's taks ages to do.. is there any single line query that i can use to get the child doc id rather then going into loops ..
I am in the process of creating a Report, and in this, i need ONLY the row groups (Parents and Child).I have a Parent group field called "Dept", and its corresponding field is MacID.I cannot create a child group or Column group (because that's not what i want).I am then inserting rows below MacID, and then i toggle the other rows to MacID and MacID to Dept.
I have an Parent table (Parentid, LastName, FirstName) and Kids table (Parentid, KidName, Age, Grade, Gender, KidTypeID) , each parent will have multiple kids, I need the result as below:
I have a table called "College". In a table, I have to create a structure for multilevel parent-child relationship
For Example,
1) State has number of colleges, Number of colleges has Number of dept. , Number of dept. has no. of subjects, no. of subject has number of chapters and the hierarchy goes on.
Expected Output is, College 1 Dept 1 subject 1 subject 2 subject 3 Dept 2 Dept 3
[Code] ....
I tried in so many ways, I do not know how to query in single table.
I want to retrive the output in a single SQL query.
I had two columns in a table; I used some values of column1 in column2. I want to identify all the column1 vlaues in Left Hand side and column2 values in Right Hand side, with a single query.
example:
MasterTable
ParentRow ChildRow --------- -------- A B C D E F G C H E M G
Output required:
ParentRow ChildRow --------- -------- A B C D E F G D (C mapped tfrom D) H F M D (G mapped from C, and C mapped from D)
To get the above output, I written query using WHILE...[BREAK|CONTINUE] concept until I get @@rowcount become zero.
I am looking for better performace and to get the output in a single query, instead of multiple passes.
Can any one suggest good tools and articles on performance tuning techniques?
I have created a single FULLTEXT on col2 & col3. suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3 FROM
TBL INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1 ON
TBL.col1=TBL1.[key] INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2 ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information. for e.g.; i was thinking to concatinate both fields like col4= ABengineBA + ABBToyotaBBA and in search i use SELECT
TBL.col4 FROM
TBL INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1 ON
TBL.col1=TBL1.[key] Result = 1 row
But it don't work in following scenario col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4 FROM
TBL INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1 ON
TBL.col1=TBL1.[key]
Result=0 Row Any idea how i can write second query to get result?
I've a question about how to implement a scenario, and would appreciate any suggestions anyone cares to offer.
I'm creating the following tables
FutureContract Equity
These (and others), may have an option placed on them, I was planning to create seperate option tables for each i.e. FutureContractOption EquityOption
With a FK pointing at the PK of the tables above.
However the data held in the option table looks the same for both, and I'm considering trying to use the same Option table for both the FutureContract & Equity tables.
There is a problem here with the Foreign key referencing the Primary key of the parent table.
I could add two foreign key columns and allow them to be null, so that only one is entered, however we can have an option on a lot of different things, so I might end up with a great list of these columns. Table - Option FK - FutureContractPK FK - EquityPK I'm using an unique number (identifier) column for the primary key of all tables.
I'm sure this is a relatively common problem, and would be grateful for any suggestions about how I might approach this.
hi, i have two tables i want the identity value of the parent table to be inserted into the chile table here is my code,but i don't know why it isn't working ! protected void Button1_Click(object sender, EventArgs e) { string connectionString = ConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString; string pcontent = TextBox1.Text; string data = TextBox2.Text; addtopic(pcontent,connectionString); addfile(data, connectionString); } public void addtopic(string subject,string connstring) { using (SqlConnection connection = new SqlConnection(connstring)) { SqlCommand command = new SqlCommand("INSERT INTO parent" + "(content)" + "Values(@content)", connection); command.Parameters.Add("@content", SqlDbType.Text).Value = subject; connection.Open(); command.ExecuteNonQuery(); } } public void addchild(string name, string connstring) { using (SqlConnection connection = new SqlConnection(connstring)) {Guid id = Guid.NewGuid(); SqlCommand commandd = new SqlCommand("INSERT INTO child" + "(parentid,data,uniqueid)" + "Values(@@IDENTITY,@data,@uid)", connection); commandd.Parameters.Add("@data", SqlDbType.NVarChar, 50).Value = name; commandd.Parameters.Add("@uid", SqlDbType.UniqueIdentifier).Value = id;
I have a parent package "A", I also have 4 child packages "B","B1","B2",B3" In BIDS, I created a file connection in the package "A" to connect to the child packages. So whenever I want to run B1 or B2, I change the path in the file connection to point to B1 or B2 and so on. Since the developement environment is File system this works perfectly fine.
But in the Test / Production environment all packages are stored in the Sql server. How can I paramaterize the child package connection so that I can use configuration / variables to select which child package to execute.
I am having problems creating a trigger in SQL Server? I have 2 tables (parent and child) with one to many relationship. When I save a record, one row gets inserted in the parent and one to many gets inserted in the child. The trigger is on the parent table and it is trying to select the number of new records just inserted in the child table that meets a certain criteria. Since the transaction hasn't been committed I can not select the number of records from the child. Does anyone know how to handle this? My manager insists this be done in a trigger. Thanks, James
I am wondering if there is a way to insert one parent record with multi child records in one transaction? I am using dataset to update my database. I want to use transaction so if one record insert fails all the transctions rollback.
We have a complex functionality of migrating data from a single record into multiple parent child tables.
To give you an example, lets us assume that we have a single table src_orders in the source database. We have a parent Order table and a child OrderDetails table in the target database. We need to pick one row from src_orders and insert this row in the Order table, pick up its PK (which is an identity column) and then use this to insert rows (say 5) in the OrderDetails table.
Again, we go back to the source, take a row, insert it into Orders, pick up the Orders PK and insert n rows in OrderDetails.
As of now, we are using the following approach for achieving this functionality.
1. Get the identity generated from the target table and store both the source table id and the target table id in a recordset.
2. Use the recordset as the source to a foreachloop , using foreachADO enumerator
3. Use data flow tasks to get the fields from the parent table for the source id, that needs to be inserted into the target child table
In case I have not ended up confusing everyone, can anyone validate this or suggest a better approach? :)
Starting with "How to: Use Values of Parent Variables in Child Packages" in the SQL Server 2005 Books Online (http://msdn2.microsoft.com/en-us/library/ms345179.aspx), it seems I need to create a separate package configuration in the child package (of type parent package variable) for each variable I want to pass from the parent to the child. Is that really so? The XML configuration file type allows me to specify any number of variables; how do I do that with the parent package variable?
For that matther, why doesn't the Execute Package Task simply allow me to specify the values of child variables (or other properties) directly? It seems SSIS has made something as trivial as a series of function calls completely opaque:
Hello, I have a Stored Procedure which insterts into Orders table. Orders table is the parent table, with primary key OrdersID. I also have a child table, Client, with foreign key OrdersID. I want it to insert the data into the orders table, and at the same time insert the OrdersID into the FK of the child table. Any info would be appreciated. I have no idea how to do it. My SP is as follows:ALTER PROCEDURE dbo.jobInsert @ClientFileNumber varchar(50),@Identity int OUT
ASINSERT Orders(ClientFileNumber, DateTimeReceived) VALUES(@ClientFileNumber, GetDate()) SET @Identity = SCOPE_IDENTITY()
