Insert Statement With Multiple Select Statements
Aug 29, 2006
hi
first of all is it possible? if so, what am i doing wrong with this
INSERT into TB2
(
ClientCode,
EngagementCode,
EngagementDescription
)
SELECT
(SELECT dbo.tarCustomer.CustID
FROM dbo.tPA00175 INNER JOIN
dbo.tarCustomer ON dbo.tPA00175.CustKey = dbo.tarCustomer.CustKey INNER JOIN
dbo.tPA00007 ON dbo.tPA00175.intJobKey = dbo.tPA00007.intJobKey),
NULL,
SELECT
(SELECT dbo.tPA00175.chrJobNumber
FROM dbo.tPA00175 INNER JOIN
dbo.tarCustomer ON dbo.tPA00175.CustKey = dbo.tarCustomer.CustKey INNER JOIN
dbo.tPA00007 ON dbo.tPA00175.intJobKey = dbo.tPA00007.intJobKey)
the first select statement for works fine, but the second one and all after i get a syntax error near 'select'.
this is just a shortened version of the statement. how would i run select statements for a table to be inserted into with different column names. also with items that are hard coded like the 'null'. thanks
tibor
View 5 Replies
ADVERTISEMENT
Feb 12, 2014
I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).
Each row will have the same item, but with a different task type.ie.
TableA.item, 'Planning'
TableA.item, 'Design'
TableA.item, 'Program'
TableA.item, 'Production'
How can I do this with tSQL using a single select statement?
View 6 Replies
View Related
Apr 23, 2008
how can take codes below and put them into one store procedure to supplie a gridview. also i will like to define the row name on the left like i did to the column on the top using the 'AS'
Code1....
SELECT
SUM(CASE WHEN Month = 'January' THEN 1 ELSE 0 END) AS January, SUM(CASE WHEN Month = 'February' THEN 1 ELSE 0 END) AS February,
SUM(CASE WHEN Month = 'March' THEN 1 ELSE 0 END) AS March, SUM(CASE WHEN Month = 'April' THEN 1 ELSE 0 END) AS April,
SUM(CASE WHEN Month = 'May' THEN 1 ELSE 0 END) AS May, SUM(CASE WHEN Month = 'June' THEN 1 ELSE 0 END) AS June,
SUM(CASE WHEN Month = 'July' THEN 1 ELSE 0 END) AS July, SUM(CASE WHEN Month = 'August' THEN 1 ELSE 0 END) AS August,
SUM(CASE WHEN Month = 'September' THEN 1 ELSE 0 END) AS September, SUM(CASE WHEN Month = 'October' THEN 1 ELSE 0 END) AS October,
SUM(CASE WHEN Month = 'November' THEN 1 ELSE 0 END) AS November, SUM(CASE WHEN Month = 'December' THEN 1 ELSE 0 END) AS December,
SUM(CASE WHEN site_descr = 'SITE1' THEN 1 ELSE 0 END) AS AllTotal
FROM dbo.V_results
WHERE (site_descr = 'SITE1')
Code2.....
SELECT
SUM(CASE WHEN Month = 'January' THEN 1 ELSE 0 END) AS January, SUM(CASE WHEN Month = 'February' THEN 1 ELSE 0 END) AS February,
SUM(CASE WHEN Month = 'March' THEN 1 ELSE 0 END) AS March, SUM(CASE WHEN Month = 'April' THEN 1 ELSE 0 END) AS April,
SUM(CASE WHEN Month = 'May' THEN 1 ELSE 0 END) AS May, SUM(CASE WHEN Month = 'June' THEN 1 ELSE 0 END) AS June,
SUM(CASE WHEN Month = 'July' THEN 1 ELSE 0 END) AS July, SUM(CASE WHEN Month = 'August' THEN 1 ELSE 0 END) AS August,
SUM(CASE WHEN Month = 'September' THEN 1 ELSE 0 END) AS September, SUM(CASE WHEN Month = 'October' THEN 1 ELSE 0 END) AS October,
SUM(CASE WHEN Month = 'November' THEN 1 ELSE 0 END) AS November, SUM(CASE WHEN Month = 'December' THEN 1 ELSE 0 END) AS December,
SUM(CASE WHEN site_descr = 'SITE2' THEN 1 ELSE 0 END) AS AllTotal
FROM dbo.V_results
WHERE (site_descr = 'SITE2')
thanks in advance
View 10 Replies
View Related
Dec 22, 2005
Hi guys and gals,
I am trying to create a select statement that will return an INT that I will later have to use in another select statement. I have the following code, however, I keep getting an error that says:
'Error116: Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.'
My Code is below:
//Start of sql
CREATE PROCEDURE ADMIN_GetSingleUsers( @userID int) AS
DECLARE @userSQL intSET @userSQL = (SELECT User_ID, TITLE.TITLE AS TITLE, Cast(Users.Active as varchar(50)) as Active, Cast(Users.Approved as varchar(50)) as Approved, Users.Unit_ID As usersUnitID, * From TITLE, Users WHERE User_ID = @userID AND TITLE.TITLE_ID = Users.Title_ID )
Select Unit_ID, Parent_ID, Unit_Name from UNITS WHERE Unit_ID = @userSQL
//End of sql
Can you point to what I am doing wrong? Thanks in advance!
View 4 Replies
View Related
Jul 27, 2007
I was wondering if it's possible to have a stored procedure that has two select statements which you can combine as a single result set. For instance:select name, age, titlefrom tableaselect name, age, titlefrom tablebCould you combine these queries into a single result set?
View 2 Replies
View Related
Dec 16, 2014
I know I should know the answer to this, but I just can't quite get the syntax down
Code:
Select case when zipCode = '10185' Then 'Deliver'
Else when zipCode = '2309' And paid = 'Yes' Then 'Deliver'
Else When zipCode = '1291' And paid = 'Yes' Then 'Deliver'
Else When zipCode = '88221' And paid = 'No' Then 'Hold'
Else when zipCode = '34123' Then 'Deliver'
End
From postalDeliveryDatabase
View 7 Replies
View Related
Sep 11, 2007
Hi,We are discussing possible implementation for sql2005 database(s). This database will serve one web portal. Part of data will get into it by hand, and part will be replicated from internal system.Some of us are for creating two separate databases, since there are two separate datasources. One, automatic, will change very little over time and requires almost no maintenance. Other datasource will be manual input. Tables and procedures related to this part will change over time.Some of us are for creating single database, since it will serve one web site. More important this group is concerned about performance issues since almost every select will require join between tables that would be stored in two separate databases. Do these issues exist? Can you share some insights, comments, links about this?
View 2 Replies
View Related
Apr 29, 2008
Hi,
OK, trying to return the results from two SQL statements into a DataSet using SqlDataAdapter. The SELECT statements query the same table but are looking for different records based on the date that the records were inserted - the 1st query looks for records fro the current month and the 2nd one looks at the same records but for the previous month. The goal is to be able to do some math within a repeater and get the difference between the two records.
Sounds easy enough and it has worked for me in different variations of the same idea but not this time - here's the code:
Protected Sub buildPartsReport(ByVal varHC) objConn.Open() sSQL = "SELECT ap.id,item_model,item_sn,aircraft_id,item_loc=item_type+ ' on ' +(SELECT tnum FROM T_Aircraft WHERE id=aircraft_id),apt.tot_time As endTimes,apt.tot_cycles as endCycles FROM T_Aircraft_Parts ap, T_Aircraft_Parts_Totals apt WHERE ap.id=apt.part_id AND report_date= '" & rD & "' AND item_type LIKE 'engine%';SELECT ap.id,apt.part_id,apt.tot_time as startTimes,apt.tot_cycles as startCycles FROM T_Aircraft_Parts ap, T_Aircraft_Parts_Totals apt WHERE ap.id=apt.part_id AND report_date= '" & oldRD & "' AND item_type LIKE 'engine%'" Dim objCommand As New SqlDataAdapter(sSQL, objConn) DS = New DataSet() objCommand.Fill(DS) Repeater1.DataSource = DS Repeater1.DataBind() DS.Dispose() objCommand.Dispose() objConn.Close() End Sub
Sorry if it wrapped a bit. The "rD" and "oldRD" are the variables for the date ranges (currently set to static numbers for testing). I'm getting the following error when I run this on an ASP.Net page:
System.Web.HttpException: DataBinding: 'System.Data.DataRowView' does not contain a property with the name 'startTimes'.
The code works fine when run via the Query Tool on the SQL server (SQL 2005 Std) though it produces two distinct "tables" which I'm guessing is the problem. I've tried variations on the code including creating a 2nd dataset and then attempting a merge (no joy) and I've tried the ".TableName" route but it complains about trying to add the tablename twice.
Thoughts? I need to get this to work - it is part of a reporting component for an application that I'm developing and I'm stuck. Thanks as always...
View 5 Replies
View Related
Jan 20, 2005
I'm new to SQL stored procedures, but I'm looking to be able to select order by statement.
declare @OrderBy
@OrderBy = 'first_name'
Select first_name,last_name from table1
Union
Select first_name,last_name from table2
if @OrderBy = 'first_name' begin
Order By first_name
else
Order By last_name
end
You'll have to excuse my if statement if the syntax is incorrect (used to only writing asp ifs :P). Thanks for any help
View 6 Replies
View Related
Aug 9, 2007
Hi all,
I have 2 select statements in my Stored Proc.
I want to display the results of each query in my DataGridView.
However, only the data of the last select query is returned.
Why is this?
Thanks.
View 7 Replies
View Related
Jul 17, 2015
We are using MS SQL Server 2008. I am running a batch job which deletes 21 days older records(6-7 million records). But daily we have transaction is going on in the database. When the delete occurs, all the insert statements got blocked and waits till the delete statement to complete. May I know why the blocking occurs?Â
View 3 Replies
View Related
May 24, 2007
I have created a stored procedure with multiple select statements using MSSQL 2000. When I connect to this using a SQLDataSource it only seems to get the first SELECT. I need to access the multiple tables returned by the stoped procedure. Can anyone point me in the dirrection of how to do this.ThanksClearz
View 3 Replies
View Related
May 19, 2008
Hi,
I have used several sql queris to generate a report. This queries pull out data from different tables. But sometimes at the same table too.
Basically those are SELECT statements.
I have created stored proc for each SELECT statement. now I'm wondering can I include all SELECT statements in one stored proc and run the report.
If possible, can anyone show me the format?
Thanks
View 4 Replies
View Related
Dec 3, 2006
Hey Guys. I’m having a little trouble and was wondering if you could help me out. I’m trying to create a custom paging control, so I create a stored procedure that returns the appropriate records as well as the total amount of records. And that works fine. What I’m having problems with is reading the data from the second select statement within the code. Anyone have any idea on how to do this? Also.. how can I check how many tables were returned?
Here's my code. I'm trying to keep it very generic so I can send it any sql statement:public DataTable connect(string sql)
{
DataTable dt = new DataTable();
SqlConnection SqlCon = new System.Data.SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings["MyDB"].ToString());
SqlDataAdapter SqlCmd = new SqlDataAdapter(sql, SqlCon);
System.Data.DataSet ds = new System.Data.DataSet();
SqlCmd.Fill(ds);
dt = ds.Tables[0];
//Here's where I don't know how to access the second select statement
return dt;
} Here's my stored procedure:
ALTER PROCEDURE dbo.MyStoredProcedure
(
@Page int,
@AmountPerPage int,
@TotalRecords int output
)
AS
WITH MyTable AS
(
Select *, ROW_NUMBER() OVER(ORDER BY ID Desc) as RowNum
From Table
where Deleted <> 1
)
select * from MyTable
WHERE RowNum > (((@Page-1)*@AmountPerPage)) and RowNum < ((@Page*@AmountPerPage)+1);
Select @TotalRecords = COUNT(*)
from Table
where Deleted <> 1
RETURN
Thanks
View 3 Replies
View Related
Nov 5, 2007
My goal is to run a bunch of select statements from different tables in one database and have them all insert to the same columns/table in the new database. Do I need a new data source for each statement, or is there a way to run all the statements in one set seeing as they all have the same destination. I keep receiving the SQL statement improperly ended error when trying.
View 5 Replies
View Related
Oct 22, 2015
I had to enable identity_insert on a bunch of tables and I have already done that. Now I need to modify my insert into select * from statements to include column list names along with identity columns for select as well as insert statements. The DDL is same but they are both different databases.There are almost 100 tables that it needs to be modified. Is there a way we can generate scripts for insert and select for each individual table along with their column lists including the identity column?
View 7 Replies
View Related
Nov 24, 2014
I ran the below 2 select statements and ended up seeing multiple cached instances of the same stored procedure. The majority have only one cached instance but more than a handful have multiple cached instances. When there are multiple cached instances of the same sproc, which one will sql server reuse when the sproc is called?
SELECT o.name, o.object_id,
ps.last_execution_time ,
ps.last_elapsed_time * 0.000001 as last_elapsed_timeINSeconds,
ps.min_elapsed_time * 0.000001 as min_elapsed_timeINSeconds,
ps.max_elapsed_time * 0.000001 as max_elapsed_timeINSeconds
[code]...
View 4 Replies
View Related
Aug 29, 2006
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies
View Related
Oct 20, 2014
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
View 1 Replies
View Related
Apr 21, 2008
I have the following insert how can i execute to multiple databases on same server:
insert into Tablerecords(labelkey,moduletype,english,spanish,updatedby)
values('hypUnderConstruction','MENU','Under Construction','Under Construction','admin')
databases: db1,db2,db3,db4,db5 etc
Thanks.
View 5 Replies
View Related
Jun 16, 2008
Hello everyone
I am using MS SQL Server Management Studio Express. When I apply multiple insert statement, it doesn't allow me to do so. I have to do it one by one, which is time consuming.
Sample
INSERT INTO table (col_a,col_b) VALUES (1,1)
INSERT INTO table (col_a,col_b) VALUES (2,2)
INSERT INTO table (col_a,col_b) VALUES (3,3)
Any ideas? I want to do it in one go. Thank you very much.
View 1 Replies
View Related
May 8, 2014
I am trying to apply the logic from the following resource: URL....but cannot get it to work with my logic for some reason.For example, the following query:
;WITH CTE1 AS (SELECT CONVERT(VARCHAR, GETDATE(), 120) AS Col1),
CTE2 AS (SELECT CONVERT(VARCHAR, GETDATE(), 111) AS Col2)
SELECT CTE1.Col1,CTE2.Col2
FROM CTE1
CROSS JOIN CTE2
GO
Produces the following output:
Col1 | Col2
2014-05-08 10:55:54 | 2014/05/08
But, as soon as I try to do something else like:
;WITH CTE1 AS (SELECT COUNT(login) FROM userinfo AS Col1),
CTE2 AS (SELECT COUNT(login) FROM userinfo AS Col2)
SELECT CTE1.Col1,CTE2.Col2
FROM CTE1
CROSS JOIN CTE2
GO
I receive the following errors:
Msg 8155, Level 16, State 2, Line 1
No column name was specified for column 1 of 'CTE1'.
Msg 8155, Level 16, State 2, Line 2
No column name was specified for column 1 of 'CTE2'.
Are there limitations when trying to use multiple CTE in a single query?
View 5 Replies
View Related
Apr 29, 2015
SELECT FirstSet.Country,FirstSet.[Month]
,ABC.ABC1
,DEF.DEF1
FROM (
SELECT [Answer Text]'Country',interview_start 'Month',[ID respondent],
[Code] ....
I didn't find whats problem with this code. Actually I try to create a select statement with with cte select statement. In cte clause my output ok but when I try to receive that output from write another select statement then its show error.
Msg 102, Level 15, State 1, Line 276
Incorrect syntax near ';'.
Msg 102, Level 15, State 1, Line 315
Incorrect syntax near ')'.
Msg 156, Level 15, State 1, Line 351
Incorrect syntax near the keyword 'as'.
View 8 Replies
View Related
Mar 13, 2003
I have following codes :
insert into table1 (lastname,firstname)
select ##Newrows.LAST, #Newrows.FIRST, from ##newrows
if @@error > 0
begin
select @ReturnError = 91001
end
Will this return @@error = 0 if insert fails but select is successful?
Thanks in advance.
-jfk
View 1 Replies
View Related
May 27, 2008
I have a select statemnet that I want to insert new rows if the data is not found from table 1 into table 2. How can I add onto this statement? What is the sql code neede?
Select *
From tbl_Data_OpenOrders
WHERE EXISTS (Select *
From tbl_TestData
WHERE tbl_Data_OpenOrders.oabl = tbl_TestData.oabl AND
tbl_Data_OpenOrders.ODLOTSEQ = tbl_TestData.ODLOTSEQ AND
tbl_Data_OpenOrders.OACUSTPO = tbl_TestData.OACUSTPO AND
tbl_Data_OpenOrders.OABLDATE = tbl_TestData.OABLDATE)
Lisa Jefferson
View 7 Replies
View Related
Feb 22, 2007
Hi,I have a very simple issue: for simplicity lets say I have 2 tables, A andB.- Table A contains 5 fields. Amongst these there is a 'id'-field whichis but a reference to table B.- Table B contains 2 fields: 'id' and 'text'In order to post data to table A I thus (from a known text value that shouldmatch 1 value in B.text) have to get the value of B.text before performingthe UPDATE/INSERT statement.How is this possible?I would have thought something likeINSERT INTO A (val1, val2, val3, ID, val4)VALUES ('x1','x2','x3', SELECT id FROM B WHERE [SOME TEXT VALUE] = B.text,'x4')however this is not possible, so I'm lost - not experienced in the arts ofSQL:-)Hope someone can help.Best Regards,Daniel
View 6 Replies
View Related
Feb 24, 2007
Hello All,
INSERT INTO [SPIResConv5].[dbo].[Batch]
([BATCH_NO],
[OPENDT]
,[USERID]
,[MODULE]
,[USERBATCH]
,[RESORT_ID]
)
Select [BATCH_NO],
[OPENDT] = getdate(),
'Hwells' as [USER_ID],
'1 CASH RECEIPT' as [MODULE],
[USERBATCH],
Resort_ID = Case Resort_ID
when 2 then 'Ell'
when 3 then 'CSI'
when 12 then 'Ell2'
when 13 then 'ATR'
end
from TransactionTempToTransaction
where Resort_ID = 3 or Resort_ID = 2 or Resort_ID = 12 or Resort_ID = 13
needing help in modifing the statement above
The first would be to grap from the batch table the last [BATCH_NO] and add one number to it-and insert --just that number €“for all records imported to Batch Table. Example: last record was 50 then 51 is the batch for all recordes imported.
Second: [USERBATCH] is a varchar, but need to insert based on current date: Say for example -today 2/23/2007 but need to insert in format = '2/23 LBX'
Last and again thanks for the help-
Resort_ID-For the Batch table only need to import how many rows,
Based on how many different resorts or in the table TransactionTempToTransaction
For example-- if there are two diffrent resorts €“ only import two rows
With the last field Resort_id being the only difrrent field showing the resort_id. If six different resorts or in tabe TransactionTempToTransaction then six rows.
Thanks for your
JK
View 1 Replies
View Related
Mar 1, 2005
I am using SQL sever 2k and C#.
There is a stored-procedure that it has multiple select statements as returned result set. How can I use SqlCommand.ExecuteReader to get all result set?
What if the multiple select statements is " FOR XML", how can I set all xml using ExecuteXmlReader?
I tried to use ExecuteReader or ExecuteXmlReader, but seems that I can only get back the result set of the first select statement, all others are messed up.
stored procedure example: NorthWind database:
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
Create PROCEDURE dbo.getShippersAndEmployeesXML
AS
select * from Shippers for xml auto, elements
select * from Employees for xml auto, elements
RETURN @@ERROR
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
C# code example:
//set connect, build sqlcommand etc
XmlTextReader reader = (XmlTextReader)command.ExecuteXmlReader();
StringBuilder sb = new StringBuilder();
while(reader.Read()) sb.Append(reader.ReadOuterXml());
Thanks for your help.
View 2 Replies
View Related
Nov 14, 2013
i have a table named masterlist wherein the columns are :
name-----age------sex
andrew---19-------male
trisha---23------female
and i have also another table which is namelist that is linked to the masterlist table.. after i search for the record andrew in the table namelist..i updated andrew as 25 and sex is female..now i want reset andrew's record, same to the records that andrew has in the table masterlist..
View 3 Replies
View Related
Aug 9, 2006
This is more of a basic SQL question rather than anything specific for T-SQL, but I assume someone here can help me...
I have a problem with properly combining a lot of AND and ORs in a SELECT statement in a stored procedure in order to get the desired results. The problem is that I want to have all results that fullfill all of the supplied conditions: InstitutionCode, CollectionCode, ScientificName, Locality (unless they are null, hence 'coalesce') and the Parentid, that can be in one of eight columns.
SELECT * FROM QueryView WHERE InstitutionCode = COALESCE(@museum, InstitutionCode) AND CollectionCode = COALESCE(@collection, CollectionCode) AND ScientificName LIKE '%' + @binomen + '%' AND Locality LIKE '%' + @locality + '%' AND ParentID1 = COALESCE(@taxparent, ParentID3) OR ParentID2 = COALESCE(@taxparent, ParentID2) OR ParentID3 = COALESCE(@taxparent, ParentID3) OR ParentID4 = COALESCE(@taxparent, ParentID4) OR ParentID5 = COALESCE(@taxparent, ParentID5) OR ParentID6 = COALESCE(@taxparent, ParentID6) OR ParentID7 = COALESCE(@taxparent, ParentID7) OR ParentID8 = COALESCE(@taxparent, ParentID8)
The current construction, however, gives me all results that fullfill either on of the four conditions, or the parentid in one of the columns. putting parentheses around parentid part gives me zero query results. I understand that the ORs should be restricted to the parentids and not the rest, but putting parentheses around parentid part gives me zero query results.
Has anyone got a good tip to help me resolve this puzzle?
View 6 Replies
View Related
Apr 14, 2005
Hi,
I am trying to run the following insert statement, but am gettng an error. The table I want to insert to
(DimensionMonthTime_hold) has an
Identity column defined for its key.
The part I cannot figure out is that when I run this insert statement without the order by statement, the insert is successful. If I attempt to run this insert statement with the Order By statement, I get an error saying that I have to provide a value for the identity value in the insert statement (which i don't want to do.) I need to have the data sorted, hence the reason for the order by.
I've tried to specify the column names on the insert line, but haven't figure that out.
Any suggestions?
Thanks
Jim
----------------------------
Insert into DimensionMonthTime_hold
select distinct substring(period,1,4) + substring(period,6,2),
substring(period,1,4) ,
case substring(period,6,2)
when '01' then '1'
when '02' then '1'
when '03' then '1'
when '04' then '2'
when '05' then '2'
when '06' then '2'
when '07' then '3'
when '08' then '3'
when '09' then '3'
when '10' then '4'
when '11' then '4'
when '12' then '4'
else 1
end,
substring(period,6,2),
case substring(period,6,2)
when '01' then 'First Quarter'
when '02' then 'First Quarter'
when '03' then 'First Quarter'
when '04' then 'Second Quarter '
when '05' then 'Second Quarter'
when '06' then 'Second Quarter'
when '07' then 'Third Quarter '
when '08' then 'Third Quarter '
when '09' then 'Third Quarter '
when '10' then 'Fourth Quarter'
when '11' then 'Fourth Quarter'
when '12' then 'Fourth Quarter'
end,
case substring(period,6,2)
when '01' then 'January'
when '02' then 'February'
when '03' then 'March'
when '04' then 'April '
when '05' then 'May'
when '06' then 'June'
when '07' then 'July '
when '08' then 'August '
when '09' then 'September '
when '10' then 'October'
when '11' then 'November'
when '12' then 'December'
end,
1,
getdate()
from transaction
where Account_type ='A'
------------------------
View 6 Replies
View Related
Jan 14, 2005
Hey,
I am not sure how to really explain this, but I'll give it a try.
I am looking to use a select statement in a way that I can tell it which rows to insert in depending on when only one result is returned. For example, if I run this statement:
SELECT Column1, Column2, Column3
FROM #Temp1
The result set is:
Column1---Column2---Column3
99--------6756756---55555
44--------55---------NULL
Column3 as only the one returned value, so I do not want it associated with any of the other rows, so I need this:
Column1---Column2---Column3
NULL------NULL------55555
99--------6756756---NULL
44--------55---------NULL
Another example:
The returned result now is:
Column1---Column2---Column3---Column4
99---------6756756---55555-----NULL
42---------55---------NULL------12345
So I need:
Column1---Column2----Column3----Column4
NULL-------NULL-------55555------NULL
NULL-------NULL-------NULL-------12345
99---------6756756----NULL-------NULL
44---------55----------NULL-------NULL
Does this make sense, and/or is it even possible?
I know it could be more of a presentation thing, but I would like to know how to do it in the code behind.
Thanks
View 2 Replies
View Related
Jun 9, 2007
is there anyway i can merge select statement and insert statement together?
what i want to do is select few attributes from a table and then directly insert the values to another table without another trigger.
for example, select * from product and with the values from product, insert into new_product (name, type, date) values (the values from select statment)
View 3 Replies
View Related
