I'm inserting data from a c# webservice into a table via a stored procedure, but I get a Column does not allow nulls on the @alert_id column/field. It is set as int and allow nulls is not ticked.
Here's the sql:
USE [aren]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [aren1002].[ArenAlertInsert]
[Code] ....
I'm trying to insert any null values into a temp table. I'm storing the ixo_rlt_code as OldRole, and 'Other' as NewRole. I need both the ixo_rlt_code as OldRole and 'Other' as NewRole in the temp talbe in order to run an update I'm writing.
I know a case statement isn't necessary here, but this section is only one small part of a larger script, so I just used it to be consistent, and it will be easier to make any future changes this way. Below is my code and the error message I'm getting...
select
ixo_key,
ixo_title as Title,
ixo_rlt_code as OldRole,
CASEWHEN ixo_title is null
or ixo_title = ''
or ixo_title = ' '
or ixo_title = ' ' THEN 'Other'
END as NewRole
from
co_customer (nolock)
join co_individual_x_organization (nolock) on ixo_key = cst_ixo_key --and ixo_delete_flag = 0
where
cst_delete_flag = 0
and cst_type = 'Individual'
and ixo_rlt_code is null
This is the Error Message I get:
Server: Msg 515, Level 16, State 2, Line 1095
Cannot insert the value NULL into column 'NewRole', table 'tempdb.dbo.#temp_______________________________________________________________________________________________________________00000001698C'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Thanks ahead of time for any help/suggestions
Hi,I basically have two tables with the same structure. One is an archiveof the other (backup). I want to essentially insert the data in to theother.I use:INSERT INTO table ( column, column .... )SELECT * FROM table2Now, table2 has a rule on various columns:@CHARACTER IN ('Y','N')but the column allows nulls, in the design view is says so anyway.When I run this query I get:A column insert or update conflicts with a rule imposed by a previousCREATE RULE statement. The statement was terminated. The conflictoccurred in database 'database', table 'table', column 'column'.The statement has been terminated.Obviously, I've changed the names of everything.The only data in those columns which could possibly conflict with therule is the NULL value. Any ideas why this doesn't work?Thanks.
View 8 Replies View RelatedWhen i do a select on my emplee table for rows with null idCompany i dont get any records
I then try to modify the table to not allow a null idCompany and i get this error message:
'Employee (aMgmt)' table
- Unable to modify table.
Cannot insert the value NULL into column 'idCompany', table 'D2.aMgmt.Tmp_Employee'; column does not allow nulls. INSERT fails.
The statement has been terminated.
This sux
I'll preface this by saying I'm pretty new to SSIS; I'm coming over from Coldfusion and don't have much DTS experience to draw from either. That said....
I've got a package that I run to migrate data from a bunch of older databases into a "flat" new schema. The new schema is not identical to the old, in other words, so it's not a simple mapping of existing columns. All the data flow tasks have finally gotten to a working state, with much trial-and-error. Now, suddenly one of the tasks is throwing this error:
"...Cannot insert the value NULL into column 'the_id', table 'the_table'; column does not allow nulls. INSERT fails."
The column is an identity column in the new table; it is NOT NULL as it is the primary key. I've triple-checked that identity is on. Basically it's generated anew each time this package is run. In the data flow task, mappings are set to ignore for this column; also, Keep identity and Keep nulls are on (although since this column is not in the source I can't see how this affects anything.)
(***For anyone wondering why in the heck I'd need this column at all, offhand I can't recall if later tasks use it or not...I'm actually wondering if it's even needed in this read-only table if it's not used as a foreign key somewhere else...however, I'd like to figure out this issue regardless... )
I've had a hard time finding anyone with the same problem out there...usually people with NULL issues simply are trying to insert into a NOT NULL column. The big difference here is that the column is identity.
Thanks,
Rick
Hi,
I've forgotten how to put a null value in a column of a table where a previous value existed before.
What I mean is if through EM, you look at the data (Open Table -> Return all Rows) and you see a value in a column that is nullable (for example, I want to change a column that has a 'ABC Company' to a NULL value).
How do you that - i've done it in the past ,but cannot remember
Thanks in advance
I'm using ADO.NET and have noticed that it is somewhat more difficult to send/receive nulls to/from the database. What are the benefits (if any exist) with storing a null value in the db as opposed to a default value?
In particular, do you save any space by storing a null opposed to a zero or 01/01/1900? Are the nulls faster for searching/comparing when querying the db?
Basically I'm just wondering if storing nulls is really the best practice and why, so that I know whether it's worth the effort in .NET to transform my variables into a null-happy form.
Any facts/opinions are appreciated,
Inge
The Question is ...Is there a way or work around to inserting a blank values into a primary field PLZ HELP.
View 7 Replies View RelatedHow can I do this in SSIS. Any suggestion please
Insert Into Table1(T1_Col1, T1_Col2)
Select T2_Col1,Isnull( T2_Col2,' ') From Table2
I want to insert from Table 2 into Table1. If the data in T2_Col2 is NULL than I want to replace it with a blank/ Space as Table1 doesnot allow NULLS
I tried to see if Derived Column task is of any help but in vain.
Any suggestion
I am trying to insert data into two different tables. I will insert into Table 2 based on an id I get from the Select Statement from Table1.
Insert Table1(Title,Description,Link,Whatever)Values(@title,@description,@link,@Whatever)Select WhateverID from Table1 Where Description = @DescriptionInsert into Table2(CategoryID,WhateverID)Values(@CategoryID,@WhateverID)
This statement is not working. What should I do? Should I use a stored procedure?? I am writing in C#. Can someone please help!!
Our database stores vehicle data in one table, but 3 different types of data are stored in the one table. The table contains all the columns for all 3 types so when you query the table you get at least 3 rows back with null values for all the columns that don't apply to that record. The data is imported to the table when it's updates so there's a possibility that they're updated at different times so they have a different BATCH like:
BATCH TYPE ID RATING INSURANCE SAFETY
300 SAFE 123 NULL NULL A
300 INS 123 NULL YES NULL
250 RATE 123 A NULL NULL
What I'd like returned is:
ID, RATING, INSURANCE, SAFETY
123 A YES A
I'm trying to do a case statement to pull the data down, but I keep ending up with multiple rows because of all the nulls. I tried doing a SUM of the case statement with an ISNULL(SAFETY,0) but I can't SUM char values. I can probably do this with 3 temp tables to load the data that I want for each TYPE into them and then select and join them together, but is there a better way to do this?
I have a derived column transformation that inspects two columns for spaces and creates a third column, initialised with either '1' or 'X'.
However the transformation is failing with the error"
Cannot insert the value NULL into column 'TNV-INSERT1'
"
Here's the expression I'm using:
SUBSTRING(rt_tran_inv_text,1,255) != " " ? " X" : SUBSTRING(rt_tnv_narr_cr,1,30) != " " ? " X" : "1"
Neither of the source columns contain nulls. Any idea why it's trying to insert nulls into the new column?
Hi,
I have fields in my table which allow nulls. Is it efficient to not insert anything (the field automatically shows up as null in this case) and leave or store some value into it. The field is a smallint field?
Thanks
Hi,
I have a temporary table into which I insert bulk data from a stored procedure output. It will be easy for me if the temptable can have a column with sequential numbers 1,2,3,4,. I could not figure out a way to do it. This is the stripped down sql what I have in the stored procedure.
insert into temptable select name, email, date from usertable where condition = xyz.
I tried auto increment column with seed 1, increment 1. But if I delete and insert again it does not start from 1. Is there any way to accompolish this? It will make the front-end code very simple.
Thank you
I have an existing table (see below).
-----------
[FormCode] [varchar] (4) NULL ,
[FiscalYear] [char] (4) NULL
-----------
I want to add the column below after the [FormCode] when my SPROC runs.
-----------
[FiscalMonth] [char] (2) NULL
-----------
Any ideas would be a big help?
TIF
I have a column name "DESC" in SQL Server table and I am getting an error when trying to insert data into this column. I cannot rename this column as it's not in my hand.
Please anybody reply me with good solution I am new to SQL.
Thanks
I need to put .doc data into a varbinary column for full text searching. I have created the db and columns but am unsure as to how to insert the varbinary data. I have found some discussions about inserting images but nothing explicitly on .doc files. Can anyone suggest resources or sample code?
View 3 Replies View RelatedHi, I have a question regarding how to insert one column values into a table by selecting from different table..Here is the syntax..
------------
insert into propertytable values (select lastvalue+incrementby from agilesequences where name='SEQPROPERTYTABLE', 13926, 0, 4, 1, 451, 1, 8, 1)
the first column in the propertytable will be... select lastvalue+incrementby from agilesequences where name='SEQPROPERTYTABLE'
How do I do that..Help PLZ..
Godwin writes "Hello,
Heres my question..
I have 2 tables.2 paticular columns exist in both the tables.
I want to be able to select those 2 columns on the 1st table and insert them on to the same 2 columns on the 2nd table.
Now,this 2nd table has another 3 columns that exist in another table.I would like to take those 3 column values from that 3rd table and insert it into the 2nd table by modifying those existing records in the 2nd table.In the 3rd table,there will be around 5 records...I want to copy the existing records 5 times in the 2nd table and insert the 3rd tables rows inside the 2nd table in that respective column for 5 rows.
I hope you understand what I mean...Im sorry for really confusing..
Please help me
Thanks
Godwin"
/*Code below raises following errors:Server: Msg 245, Level 16, State 1, Line 6Syntax error converting the varchar value 'a' to a column of data typeint.*/create table #x (i integer, c char(1))create table #y (c char(1), i integer)insert into #x VALUES (1, 'a')insert into #y SELECT * from #xdrop table #xdrop table #y--CODE COMPLETEIs there a way to use the column names as the basis for the insert asopposed to column position? The key here is that I DO NOT want toSPECIFY COLUMN NAMES (i.e. 'insert into #y (i,c) SELECT * from #x')Regards,Ty
View 3 Replies View Related
Hi All
Is it possible to insert the identity cloumn in a table via SSIS. I've an ID (Identity) column is a table and I am importing data in the table using Excel sheet. I want to insert the value of ID column as Identity(1,1).
Hi,
I am using SQL Server 2005 Mobile Edition & Merge Replication
in this I want to insert a record into table,
in that table I have taken UserID coloumn as auto incrementing Identity type.
In a book I read that,
If you are using an Identity column, you must find the next available number and reseed before an insert can be successful. You will also have to set up ranged identity columns on the published database to prevent errors when the new data is merged.
Now I want to ask here that, how should I ressed that value before inserting?????
any help in a form of CODe will be appriciated.....
thanks in advance...
Hi,
I have a data file in the folloing format
SubjectId1|class1
SubjectId2|class2
SubjectId3|class3
I just wanted to insert only SubjectIds into my table 'Subjects' which has the follwing schama ignoring the classes
The row delimeter is "
" and the column delimeter is ' | '
Table Subjects
{
ID (Autoincrement)
SubjectId varchar(20)
}
Can any one provide the format file for doing this or suggest anyway to do this?
Please do note that the file may contain millions of records
Thank u
~mohan
Hi all,
I want to produce some output for Mainframe application. For that I want to insert values from multiple table as source to a single column (huge in size)of a different table (Destination table). There may be same related records in all of the source tables with the primary key. When I export values from the source tables , each related records should be insterted to the destination table's field (multiple entries for each table). Please advise.
Thanks
I have a table with a string value, where all values are seperated by a space/blank. I now want to use SQL to split all the values and insert them into a different table, which then later will result in deleting the old table, as soon as I got all values out from it.
Old Table:
Code:
ID, StringValue
New Table:
Code:
ID, Value1, Value2
Do note: Value1 is INT, Value2 is of nvarchar, hence Value2 can contain spaces... I just need to split on the FIRST space, then convert index[0] to int, and store index[1] as it is.
I can split on all spaces and just Select them all and add them like so: SELECT t.val1 + ' ' + t.val2... If I cant find the first space that is... I mean, first 2-10 characters in the string can be integer, but does not have to be.Shall probably do it in code instead of SQL?Now I want to run a query that selects the StringValue from OldTable, splits the string by ' ' (a blank) and then inserts them into New Table.
Code:
SELECT CASE CHARINDEX(' ', OldTable.stringvalue, 1)
WHEN 0 THEN OldTable.stringvalue
ELSE SUBSTRING(OldTable.stringvalue, 1, CHARINDEX(' ', OldTable.stringvalue, 1) - 1)
END
AS FirstWord
FROM OldTable
Found an example using strange things like CHARINDEX..But issue still remains, because the first word is of integer, or it does not have to be...If it isn't, there is not "first value", and the whole string shall be passed into "value2".How to detect if the very first character is of integer type?
Code:
@declare firstDigit int
IF ISNUMERIC(SUBSTRING(@postal,2,1) AS int) = 1
set @firstDigit = CAST(SUBSTRING(@postal,2,1) AS int)
ELSE
set @firstDigit = -1
[code]....
I am trying to insert bulk data into main table from staging table in sql server 2012. If any error comes, this total activity is rollbacked. I don't want that to happen. I want to know the records where ever the problem persists, and the rest has to be inserted.
View 2 Replies View RelatedHi, I have a table in which I will insert several redundant data. Don't ask why, is Integration services, it only reads data and inserts it in a SQL table. THis way, I have a SQL table with several lines repeating them selves. What I want to do is create a procedure that reads the distinct data and inserts it in another table, but my problem is that I am not able to select data line by line on the original table to save it in local variables and insert it on the another table, I just can select the last line. I've tried a while cycle but no succeed. Here is my code: create proc insertLocalizationASdeclare @idAp int, @macAp varchar(20), @floorAp varchar(2), @building varchar(30), @department varchar(30)select @idAp = idAp from OLTPLocalization where idAp not in (select idAp from dimLocalization)select @macAp=macAp,@floorAp=floorAp,@building=building,@department=department from OLTPLocalizationif (@idAp <> null)beginInsert into dimLocalization VALUES(@idAp,@macAp,@floorAp,@building,@department)endGO This only inserts the last line in the "oltpLocalization" table. O the other hand, like this:create proc aaaaasdeclare @idAp as int, @macAp as varchar(50), @floorAp as int, @building as varchar(50), @department as varchar(50)while exists (select distinct(idAp) from OLTPLocalization)begin select @idAp =idAp from OLTPLocalization where idAp not in (select idAp from dimLocalization) select @macAp = macAp from OLTPLocalization where idAp = @idAp select @building = building from OLTPLocalization where idAp = @idAp select @department = department from OLTPLocalization where idAP = @idApif (@idAp <> null)begin insert into dimLocalization values(@idAp,@macAp,@floorAp,@building,@department)endendgo this retrieves every distinct idAp in each increment on the while statement. The interess of the while is really selecting each different line in the OLTPLocalization table. I did not find any foreach or for each statement, is there any way to select distinct line by line in a sql table and save each column result in variables, to then insert them in another table? I've also thought about web service, that reads the distinct data from the oltpLocalization into a dataset, and then inserts this data into the dimLocalization table. Is there anything I can do?Any guess?Really needing a hand here!Thanks a lot!
View 1 Replies View RelatedBelow is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
Hi, I have two tables in a data base and i'm inserting the data from one into the other...no probs. What i was wondering is, in table1 i have an column of ID numbers. In the table2 i have a matching set of ID numbers. There are 5 PersonID numbers in table one and 10 in table two, the same 5 numbers as in table1 but each ID has a duplicate with different data in the two rows.
SAMPLE:
INSERT
INTO Table1 (PersonID, level1, Level2, Level3, Level4)
SELECT PersonID,level1, Level2, Level3, Level4
FROM Table2
When i insert the data into table1 it leaves the first 5 rows of data as null and then populates the table with all the data from table two. Is there anyway of preventing these first 5 columns from remaining empty....
I hope that makes sense
Hi, I'm fairly new to SQL Server 2005.
i have a table that creates customer id's along with other data (let's call it Customer)
I would like to take the same customer_id data and import it into a different table (HQ_Customer) the new table also has different column names.
Is there a script that can be used for this problem?
Well, I think this should be an easy question, but here goes:
I'm taking data from one table and inserting it into another. According to the SQL Server Mobile Book Online, the syntax goes like this:
INSERT INTO Table1 (col1, col2) SELECT (col1, col2) from Table2
So while I can do this with my tables:
INSERT INTO sensor_stream (sensor_stream_id) SELECT (sensor_stream_id) FROM sensor_stream_temp
If I add any more columns, I get an error. Like this:
INSERT INTO sensor_stream (sensor_stream_id, sensor_stream_type_id) SELECT (sensor_stream_id, sensor_stream_type_id) FROM sensor_stream_temp
The error is "There was an error parsing th equery. [ Token line number =1, Token line offset = 98, Token in error = ',' ]"
Anyone have any ideas about why I cannot do more than one column at a time?
TIA,
-Dana
Hi,
Anyone can help me?
How to create Table A by inserting all the data from Table B?
Cheers,
Daniel.
How do i insert data into multiple tables. Lets say i have 2 tables: Schedules and Event
Schedules data is entered into the Schedules Table first
then now i need to insert Event table's data by refrencing the (PK ID) from the schedules table.
How do i insert data into Event table referencing the (PK ID) from Schedules Table ?
Fields inside each of the tables can be found below:
Event Table
(PK,FK) ScheduleID
EventTitle
AccountManager
Presenter
EventStatus
Comment
Schedule Table
(PK) ID
AletrnateID
name
UserID
UserName
StartTime
EndTime
ReserveSource
Status
StatusRetry
NextStatusDateTime
StatusRemarks