Inserting Into Table With One Column 1,2,3,4...
Jan 14, 2005
Hi,
I have a temporary table into which I insert bulk data from a stored procedure output. It will be easy for me if the temptable can have a column with sequential numbers 1,2,3,4,. I could not figure out a way to do it. This is the stripped down sql what I have in the stored procedure.
insert into temptable select name, email, date from usertable where condition = xyz.
I tried auto increment column with seed 1, increment 1. But if I delete and insert again it does not start from 1. Is there any way to accompolish this? It will make the front-end code very simple.
Thank you
View 3 Replies
ADVERTISEMENT
Mar 5, 2004
I have an existing table (see below).
-----------
[FormCode] [varchar] (4) NULL ,
[FiscalYear] [char] (4) NULL
-----------
I want to add the column below after the [FormCode] when my SPROC runs.
-----------
[FiscalMonth] [char] (2) NULL
-----------
Any ideas would be a big help?
TIF
View 7 Replies
View Related
May 5, 2004
Hi, I have a question regarding how to insert one column values into a table by selecting from different table..Here is the syntax..
------------
insert into propertytable values (select lastvalue+incrementby from agilesequences where name='SEQPROPERTYTABLE', 13926, 0, 4, 1, 451, 1, 8, 1)
the first column in the propertytable will be... select lastvalue+incrementby from agilesequences where name='SEQPROPERTYTABLE'
How do I do that..Help PLZ..
View 3 Replies
View Related
Sep 26, 2013
I'm inserting data from a c# webservice into a table via a stored procedure, but I get a Column does not allow nulls on the @alert_id column/field. It is set as int and allow nulls is not ticked.
Here's the sql:
USE [aren]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [aren1002].[ArenAlertInsert]
[Code] ....
View 7 Replies
View Related
Feb 16, 2006
Godwin writes "Hello,
Heres my question..
I have 2 tables.2 paticular columns exist in both the tables.
I want to be able to select those 2 columns on the 1st table and insert them on to the same 2 columns on the 2nd table.
Now,this 2nd table has another 3 columns that exist in another table.I would like to take those 3 column values from that 3rd table and insert it into the 2nd table by modifying those existing records in the 2nd table.In the 3rd table,there will be around 5 records...I want to copy the existing records 5 times in the 2nd table and insert the 3rd tables rows inside the 2nd table in that respective column for 5 rows.
I hope you understand what I mean...Im sorry for really confusing..
Please help me
Thanks
Godwin"
View 1 Replies
View Related
Jul 20, 2005
/*Code below raises following errors:Server: Msg 245, Level 16, State 1, Line 6Syntax error converting the varchar value 'a' to a column of data typeint.*/create table #x (i integer, c char(1))create table #y (c char(1), i integer)insert into #x VALUES (1, 'a')insert into #y SELECT * from #xdrop table #xdrop table #y--CODE COMPLETEIs there a way to use the column names as the basis for the insert asopposed to column position? The key here is that I DO NOT want toSPECIFY COLUMN NAMES (i.e. 'insert into #y (i,c) SELECT * from #x')Regards,Ty
View 3 Replies
View Related
May 2, 2007
Hi All
Is it possible to insert the identity cloumn in a table via SSIS. I've an ID (Identity) column is a table and I am importing data in the table using Excel sheet. I want to insert the value of ID column as Identity(1,1).
View 10 Replies
View Related
Dec 11, 2004
Hi all,
I want to produce some output for Mainframe application. For that I want to insert values from multiple table as source to a single column (huge in size)of a different table (Destination table). There may be same related records in all of the source tables with the primary key. When I export values from the source tables , each related records should be insterted to the destination table's field (multiple entries for each table). Please advise.
Thanks
View 5 Replies
View Related
Aug 14, 2012
I have a table with a string value, where all values are seperated by a space/blank. I now want to use SQL to split all the values and insert them into a different table, which then later will result in deleting the old table, as soon as I got all values out from it.
Old Table:
Code:
ID, StringValue
New Table:
Code:
ID, Value1, Value2
Do note: Value1 is INT, Value2 is of nvarchar, hence Value2 can contain spaces... I just need to split on the FIRST space, then convert index[0] to int, and store index[1] as it is.
I can split on all spaces and just Select them all and add them like so: SELECT t.val1 + ' ' + t.val2... If I cant find the first space that is... I mean, first 2-10 characters in the string can be integer, but does not have to be.Shall probably do it in code instead of SQL?Now I want to run a query that selects the StringValue from OldTable, splits the string by ' ' (a blank) and then inserts them into New Table.
Code:
SELECT CASE CHARINDEX(' ', OldTable.stringvalue, 1)
WHEN 0 THEN OldTable.stringvalue
ELSE SUBSTRING(OldTable.stringvalue, 1, CHARINDEX(' ', OldTable.stringvalue, 1) - 1)
END
AS FirstWord
FROM OldTable
Found an example using strange things like CHARINDEX..But issue still remains, because the first word is of integer, or it does not have to be...If it isn't, there is not "first value", and the whole string shall be passed into "value2".How to detect if the very first character is of integer type?
Code:
@declare firstDigit int
IF ISNUMERIC(SUBSTRING(@postal,2,1) AS int) = 1
set @firstDigit = CAST(SUBSTRING(@postal,2,1) AS int)
ELSE
set @firstDigit = -1
[code]....
View 2 Replies
View Related
Aug 15, 2007
I created very simple table with 3 columns and one is varchar(max) datatype
When i insert records thru VC++ ADO code i am getting this error
Exception Description Multiple-step OLE DB operation generated errors. Check e
ach OLE DB status value, if available. No work was done. and Error Number:: -2147217887
ODBC Driver: SQL Native Client
SQL server 2005
Table
CREATE TABLE [dbo].[RAVI_TEMP](
[ID] [int] NULL,
[Name] [varchar](max) NULL,
[CITY] [varchar](50) NULL
)
VC++ code
#include "stdafx.h"
#include <string>
#include <strstream>
#include <iomanip>
int main(int argc, char* argv[])
{
try
{
HRESULT hr = CoInitialize(NULL);
_RecordsetPtr pExtRst = NULL;
_bstr_t bstrtDSN, bstrtSQL;
bstrtDSN = L"DSN=espinfo;UID=opsuser;PWD=opsuser;";
bstrtSQL = L"SELECT * FROM RAVI_TEMP";
_variant_t vartValueID,vartValueNAME,vartValueCITY;
_bstr_t bstrtValueID,bstrtValueNAME,bstrtValueCITY;
pExtRst.CreateInstance(__uuidof(Recordset));
hr = pExtRst->Open(bstrtSQL, bstrtDSN, adOpenDynamic, adLockOptimistic, adCmdText);
hr = pExtRst->AddNew();
bstrtValueID = L"1";
vartValueID = bstrtValueID.copy();
bstrtValueNAME = L"RAVIBABUBANDARU";
vartValueNAME = bstrtValueNAME.copy();
bstrtValueCITY = L"Santa Clara";
vartValueCITY = bstrtValueCITY.copy();
pExtRst->GetFields()->GetItem(L"ID")->Value = vartValueID;
pExtRst->GetFields()->GetItem(L"NAME")->Value = vartValueNAME;
pExtRst->GetFields()->GetItem(L"CITY")->Value = vartValueCITY;
pExtRst->Update();
pExtRst->Close();
}
catch(_com_error e)
{
printf("Exception Description %s and Error Number:: %d",(LPTSTR)e.Description(),e.Error());
return e.Error();
}
return 0;
CoUninitialize();
}
if i use regular SQL ODBC driver, no error but its truncating the data
Adv Thanks for your help
View 1 Replies
View Related
Oct 10, 2007
I am trying to insert data into two different tables. I will insert into Table 2 based on an id I get from the Select Statement from Table1.
Insert Table1(Title,Description,Link,Whatever)Values(@title,@description,@link,@Whatever)Select WhateverID from Table1 Where Description = @DescriptionInsert into Table2(CategoryID,WhateverID)Values(@CategoryID,@WhateverID)
This statement is not working. What should I do? Should I use a stored procedure?? I am writing in C#. Can someone please help!!
View 3 Replies
View Related
Jan 31, 2008
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
View 3 Replies
View Related
May 30, 2006
I am trying to write a script to insert more than one column but the script I am making only inserts the column in the second line and I dont know why.
In my code below, columnB is added to the table, but not columnA. I am stumped
My sql is:
<CODE>
Alter table [dbName].[dbo].[tableName] Add columnA bit Default 0 Not NullAlter table [dbName].[dbo].[tableName] Add columnB bit Default 0 Not Null
</CODE>
thanks for your help.
View 1 Replies
View Related
May 20, 2007
I'm trying to INSERT into an Sql db column the User Name (Login Name) from a login to my website. So the insertparameters statement would be?
<insertparameters>
<asp:???????
</insertparameters>
Thank you for any help you can offer.
View 3 Replies
View Related
Jan 2, 2001
Hi Friends
Happy new year 20001.
Is it requires DBO Permission for do 'SET IDENTITY_INSERT FARRentalUnit ON'
or Write permission is enough.
I don't want give dbo perivilage to user.
Please reply soon.
Thanks for reply in advance.
Murali
View 3 Replies
View Related
Mar 15, 2000
I would like to insert several columns into one column.
eg. Coloumn1, Column2 & Coloum3 insert into Column00
thanks, Vic
View 1 Replies
View Related
Oct 8, 2007
hi,
In the below code, i am trying to insert the identity value into the 2nd column of the Symp_Quote table. Schema of the table Symp_Quote is as follows.
CRAETE TABLE Symp_Quote
(
QuoteRevision_ID INT PK,
DocumentSeq TINYINT PK,
DocumentDisplayName VARCHAR (255)
)
1st column data is coming from the select statement. but for 2nd column i have to insert identity or some unique value. to do that i was trying withe the following code, but it failed.
INSERT INTO Symp_Quote
(
QuoteRevision_ID,
DocumentSeq,
DocumentDisplayName
)
SELECT
S.QuoteRevision_ID,
IDENTITY (INT,1,1) AS DocumentSeq,
T.Name,
FROM Symp S
INNER JOIN Trilogy T
ON
SQR.tril_gid = FQR.tril_gid
kindly correct me whr I am wrong.........
Thanks,
Rahul Jha
View 5 Replies
View Related
Jun 17, 2008
Hello,
I am fairly new to SQL I have started to administer a system which handles carrier information for a mail order system. The logic behind the system is quite simple there are 5 or so columns in a table the first column is the first part of the postcode i.e EX15, the other columns contain which delivery services and depot numbers are associated with that postcode. It works fine at the moment.
However now the main carrier has decided that they are now going to split these postcodes so for example EX15 1* goes to a different depot than EX15 2*
I cant seem to insert EX15 1 into the first column, I get the following error:
Attempt to store duplicate value in unique column. (-155)
Is this because of the space in 'EX15 1'? Because 'EX15' already exists in that column? In which case do I need to somehow tell SQL that there is a space there?
I hope this makes sense
Below is a snap of the table with the existing EX15 postcode data
postcode|carrier_code|available|depot_code|hub_code|county_code
----------------------------------------------------------------
EX15.....|NF/S93......|........1|34........|C.......|DEVO
EX15.....|NF/SAT......|........1|34........|C.......|DEVO
EX15.....|NF/930......|........1|34........|C.......|DEVO
EX15.....|NF/AM.......|........1|34........|C.......|DEVO
EX15.....|NF/ON.......|........1|34........|C.......|DEVO
EX15.....|NF/48.......|........1|34........|C.......|DEVO
EX15.....|NF/3D.......|........1|34........|C.......|DEVO
Here is a snap of how I would like to set up another entry:
postcode|carrier_code|available|depot_code|hub_code|county_code
----------------------------------------------------------------
EX15 1...|NF/S93......|........1|34........|C.......|DEVO
EX15 1...|NF/SAT......|........1|34........|C.......|DEVO
EX15 1...|NF/930......|........1|34........|C.......|DEVO
EX15 1...|NF/AM.......|........1|34........|C.......|DEVO
EX15 1...|NF/ON.......|........1|34........|C.......|DEVO
EX15 1...|NF/48.......|........1|34........|C.......|DEVO
EX15 1...|NF/3D.......|........1|34........|C.......|DEVO
Thanks
View 3 Replies
View Related
Feb 15, 2006
I'm trying to perform an insert on a table from another table, but
the fieldnames are different. The data is similar, but there are
less fields as well. Does anyone know how to accomplish this? All
the material I've read on the Internet so far pertaining to Insert
statements, has all the column names matching up.
Any help would be greatly appreciated.
View 3 Replies
View Related
May 1, 2001
Is there a way to insert multiple values into a single column based on various "tests".
For example, I want to check a sales_order table and flag all new orders coming in against previous orders placed that were determined to be fraudulent. If I were to set up i.e. five different tests(i.e. check email, credit_card number etc. against previous fraud orders), then there would be the possibility that any given order can be flagged 1 to 5 times. I want to record all of these tests within the same column if possible. Therefore the output may look something like the following:
order_number fraud_score
1234567890 a,b,d
5432109876 e
2345678901 null
3455607983 a,b,c,d,e
I was considering adding five additional columns to the table and running five different update steps, but this doesn't appear very scalable. Any suggestions would be greatly appreciated!
thanks in advance-
trevorb
View 3 Replies
View Related
Jan 15, 2007
Hi
In MySQL it's simple to insert new columns in specific locations in a table like this
sql Code:
Original
- sql Code
alter table foo add column bar integer not null default 0 after baz
ALTER TABLE foo ADD COLUMN bar integer NOT NULL DEFAULT 0 AFTER baz
But attempting to do the same thing in MSSQL fails with a syntax error on the word "after." I can insert columns in MSSQL but only if they are added to the end. I looked at the Microsoft insert documentation here but don't see any way to replicate the above MySQL command.
Is there any way to do this in MSSQL? Or do I have to completely recreate all my tables from scratch?
Thanks for any help
View 6 Replies
View Related
Aug 10, 2004
Hello, I was wondering, how do I insert a file in an Image type column from the SQL server 2000 corporative administrator? I have a table that contains information about all the programs we run here, and I have a column that I set to image type, I want to put the icon of my programs there..
View 5 Replies
View Related
Dec 20, 2013
I am having Test table with (id int , DataDescription xml) . I need to read the values from DataDescription column and insert into one table.
View 2 Replies
View Related
Oct 17, 2007
I have a column name "DESC" in SQL Server table and I am getting an error when trying to insert data into this column. I cannot rename this column as it's not in my hand.
Please anybody reply me with good solution I am new to SQL.
Thanks
View 4 Replies
View Related
Oct 10, 2007
Hi at all,I'm trying to bulk insert a uniqueidentifier column from unicode file.In my file I have guid generated from c# application and they areformatted in this way (separated by "|") :guid | field1 | field2fc0c0c42-438e-4897-96db-8b0489e873ef|field1|field2In my destination table I have three column:id (uniqueidentifier)field1 (nvarchar)field2 (nvarchar)I use in bulk insert a format file like this :9.031SQLNCHAR00"| "1IDLatin1_General_CI_AS2SQLNCHAR00"| "2Field1Latin1_General_CI_AS3SQLNCHAR00"| "3Field2Latin1_General_CI_ASand I use this scriptBULK INSERT [dbo].[KWTA2] FROM 'd:WTA2.txt'WITH (FORMATFILE = 'd:wta2Format.FMT')It doesn't work, it prints outMsg 8152, Level 16, State 13, Line 2String or binary data would be truncated.I've also tried to specify in FMT file SQLUNIQUEID instead of SQLNCHARand it works perfectly but it imports another data. For example theguid fc0c0c42-438e-4897-96db-8b0489e873ef became00350031-0039-0033-3100-300030003000Please can you help me?Why sql converts alphanumerical GUID into only numbers ID?How can I bulk insert GUID? (I didn't find anything googling around : )Thanks!Bob
View 2 Replies
View Related
Feb 19, 2007
Hi,
I am trying to insert some arabic characters into one of the tables but after I insert it, it get stored as ?????. What should I do? I have SQL Sever Managment Studio Express running on Windows XP. I appreciate any suggestions!!
Thanks
View 5 Replies
View Related
Aug 18, 2007
I need to put .doc data into a varbinary column for full text searching. I have created the db and columns but am unsure as to how to insert the varbinary data. I have found some discussions about inserting images but nothing explicitly on .doc files. Can anyone suggest resources or sample code?
View 3 Replies
View Related
Feb 23, 2015
I am trying to insert bulk data into main table from staging table in sql server 2012. If any error comes, this total activity is rollbacked. I don't want that to happen. I want to know the records where ever the problem persists, and the rest has to be inserted.
View 2 Replies
View Related
Apr 24, 2008
My Pocket PC application exports signature as an image. Everything is fine when choose Use SQL statements in TableAdapter Configuration Wizard.
main.ds.MailsSignature.Clear();
main.ds.MailsSignature.AcceptChanges();
string[] signFiles = Directory.GetFiles(Settings.signDirectory);
foreach (string signFile in signFiles)
{
mailsSignatureRow = main.ds.MailsSignature.NewMailsSignatureRow();
mailsSignatureRow.Singnature = GetImageBytes(signFile); //return byte[] array of the image.
main.ds.MailsSignature.Rows.Add(mailsSignatureRow);
}
mailsSignatureTableAdapter.Update(main.ds.MailsSignature);
But now I am getting error "General Network Error. Check your network documentation" after specifying Use existing stored procedure in TableAdpater Configuration Wizard.
ALTER PROCEDURE dbo.Insert_MailSignature( @Singnature image )
AS
SET NOCOUNT OFF;
INSERT INTO MailsSignature (Singnature) VALUES (@Singnature);
SELECT Id, Singnature FROM MailsSignature WHERE (Id = SCOPE_IDENTITY())
For testing I created a desktop application and found that the same Code, same(Use existing stored procedure in TableAdpater Configuration Wizard) and same stored procedure is working fine in inserting image into the table.
Is there any limitation in CF?
Regards,
Professor Corrie.
View 3 Replies
View Related
May 24, 2007
Hi, I have a table in which I will insert several redundant data. Don't ask why, is Integration services, it only reads data and inserts it in a SQL table. THis way, I have a SQL table with several lines repeating them selves. What I want to do is create a procedure that reads the distinct data and inserts it in another table, but my problem is that I am not able to select data line by line on the original table to save it in local variables and insert it on the another table, I just can select the last line. I've tried a while cycle but no succeed. Here is my code: create proc insertLocalizationASdeclare @idAp int, @macAp varchar(20), @floorAp varchar(2), @building varchar(30), @department varchar(30)select @idAp = idAp from OLTPLocalization where idAp not in (select idAp from dimLocalization)select @macAp=macAp,@floorAp=floorAp,@building=building,@department=department from OLTPLocalizationif (@idAp <> null)beginInsert into dimLocalization VALUES(@idAp,@macAp,@floorAp,@building,@department)endGO This only inserts the last line in the "oltpLocalization" table. O the other hand, like this:create proc aaaaasdeclare @idAp as int, @macAp as varchar(50), @floorAp as int, @building as varchar(50), @department as varchar(50)while exists (select distinct(idAp) from OLTPLocalization)begin select @idAp =idAp from OLTPLocalization where idAp not in (select idAp from dimLocalization) select @macAp = macAp from OLTPLocalization where idAp = @idAp select @building = building from OLTPLocalization where idAp = @idAp select @department = department from OLTPLocalization where idAP = @idApif (@idAp <> null)begin insert into dimLocalization values(@idAp,@macAp,@floorAp,@building,@department)endendgo this retrieves every distinct idAp in each increment on the while statement. The interess of the while is really selecting each different line in the OLTPLocalization table. I did not find any foreach or for each statement, is there any way to select distinct line by line in a sql table and save each column result in variables, to then insert them in another table? I've also thought about web service, that reads the distinct data from the oltpLocalization into a dataset, and then inserts this data into the dimLocalization table. Is there anything I can do?Any guess?Really needing a hand here!Thanks a lot!
View 1 Replies
View Related
Oct 22, 2012
I write a insert trigger on my table LeaveRegister(1000 rows) and inserting rows in audit table, but when i inserting a row in LeaveRegister table. In audit table 1000 + 1 rows are inserting every time.
View 6 Replies
View Related
Aug 14, 2015
Below is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
View 5 Replies
View Related
Nov 2, 2015
INSERT
INTO [Table2Distinct]
([CLAIM_NUMBER]
,[ACCIDENT_DATE]
[code]....
I used the above query and it still inserts all the duplicate records. What is wrong with my statement?
View 5 Replies
View Related
