Inserting Varchar To Decimal/Numeric
Aug 29, 2007
Hi,
Can we insert varchar values to Decimal(9,2)/numeric(9,2) fields?
I've a temp table with varchar values. I checked using isnumeric and all the values are numeric. But when I do the insert, it fails.
I was able to insert the following values:
000290165
000501075
000290165
000326314
But NOT the following:
010773474
All the values are 9 digits only.......
How can I convert this kind of numbers?
I need to convert all the 9 digit numbers to XXXXXXX.xx format.
(7digits.2 digits)
Thanks,
Siva.
View 3 Replies
ADVERTISEMENT
Aug 31, 2015
So my data is delivered as numeric(9,2)...like 100.00. I have to extract that data and store it as a varchar 0 filled without the decimal place...like 0000010000///I tried the following and it did not work...
RIGHT('000000000'+CONVERT(VARCHAR,[EODPosting].[Amount]),10),
View 8 Replies
View Related
Apr 3, 2014
I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.
Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.
case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine.
CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green
ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red
ELSE '3' --White
END
END
else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.
[code]....
I checked the NRESULT field, and there are not any NULL values in there, either.
View 1 Replies
View Related
Dec 13, 2007
Hi guys, how do i convert a decimal to numeric data type?
View 3 Replies
View Related
Apr 12, 2008
Hi, I need to know the difference between Numeric and Decimal datatypes. In which we case we use numeric and in which case we use decimal? I searched in some sql related websites and came to know that both are same. Then what is the need of these two datatypes? Either Numeric or Decimal is alone enough? Please explain me in detail ....
Awaiting your replies...
Thanks,
Rakesh.
View 4 Replies
View Related
Sep 19, 2007
Hi,
Database: MS SQL
Backend: Visual FoxPro ver 9
I have a table on SQL with numeric field (18,3), when create a cursoradaptor the become the a numeric field accept only int Value not allow to accept decimal. How to enable the field to accept decimal.
I am already:-
set fixed on
set decimal to 3
Best regards
View 3 Replies
View Related
Jun 20, 2007
Hi ,
I have a column in my extract table as nchar(3) and in the destination (the same column with diff name ) it is decimal(3,0) .....i tried to use dataconversion transformation.....i even tried to use cast/convert fn's in the SQL Command (which i use in the "Source Transformation" to get the columns from the extract table).
I tried all the ways i can and still i get the same error..:
[OLE DB Source [1]] Error: SSIS Error Code DTS_E_OLEDBERROR.
An OLE DB error has occurred. Error code: 0x80040E07. An OLE
DB record is available. Source: "Microsoft OLE DB Provider
for SQL Server" Hresult: 0x80040E07 Description: "Error
converting data type nvarchar to numeric.".
Can we actually do it...?? any help would be appreciated.
thanks
ravi
View 12 Replies
View Related
Oct 2, 2007
I'm getting some data from a flat file with a SSIS Package, it comes a integer but I would like to converted to a decimal with a 3 scale.
Example:
Flat File: 2070015000950011800
In the data conversion I had it with a 3 scale, but what I got was this:20700.00015000.0009500.00011800.000But what I want is something like this:20.70015.0009.50011.800
I dont know if you guys get the idea. But I will apreciate if anyone can help me.
Thanks,
Erick
View 2 Replies
View Related
Jul 26, 2013
On the Microsoft website, I am trying to understand the how the decimal and numeric data types work. It says that valid values for precision are:
- 10^38 +1 through 10^38 - 1
I don't understand the purpose of the negative sign before the first 10.I understand that decimal (p,s) refers to haing a total of p digits (before and after the decimal) and only s number of digits to the right of the decimal. How does the equation above relate to the 's' portion of the syntax?
View 2 Replies
View Related
Jul 23, 2005
I've a SQL view performing a number of very precise calculations ie.495/(1.112 - (.00043499*((Col1 + Col2 + Col3))) + ( .00000055 * ((Col1+ Col2 + Col3)) * ((Col1 + Col2 + Col3))) - (.00028826 * Col4))) -450)/100Obviously this sometimes causes a precision issues because the floatand real datatypes don't hold precise values... My problem is thatconverting to the numeric or decimal datatype easily produces an errorif the precision is not big enough to hold the resulting output... Sohere's my questions:Does anyone see a problem with me maxing out the precision of thedecimal datatype (ie. use DECIMAL(38,8) across a couple dozeninter-related formulas?So the above code would now exec like this:495/(CONVERT(DECIMAL(38,8),1.112) -(CONVERT(DECIMAL(38,8),.00043499)*((Col1 + Col2 + Col3))) +(CONVERT(DECIMAL(38,8),.00000055) * ((Col1 + Col2 + Col3)) * ((Col1 +Col2 + Col3))) - (CONVERT(DECIMAL(38,8),.00028826) * Col4))) - 450)/100If anyone does see a problem with this approach, could you suggestanother alternative?
View 1 Replies
View Related
May 15, 2008
I have a column that is set to VARCHAR 1 and want to change it to NUMERIC 5,2
Is this possible or am I barking up the wrong tree?
Cheers,
Gary
View 1 Replies
View Related
Jul 20, 2005
I have imported data from excel file. When data came to SQL table, the typeof AMOUNT column was varchar. I tried to convert and cast amount type ofamount column to number type but it does not allow me to convert.What is the best way of importing data into SQL and type stays the same asit was in excel file ?Or anyone has any better solution, please let me.Thanks.
View 4 Replies
View Related
Nov 22, 2007
Hello All,
I am querying from a table which has all varchar values. I want to display the result in graph and hence would need the varchar to be converted to Decimal. But I am getting the error : Error converting data type varchar to Numeric. Here is the SELECT code: Can you please help me do this? I'll post the script in the next post in 10 minutes....
View 3 Replies
View Related
Nov 18, 2003
i have a huge stored procedure abt 500 lines..and i am calling this sp from an asp.net page...thn i got this error - error converting varchar to numeric - and am trying to debug...is there any way we can find out where the error is coming from...like aproxly which line number..etcor do i have to go through each line manually and see where i am doing the conversion....
thanks
View 2 Replies
View Related
Oct 24, 2001
I have a field with State and Zip (ie; CA94526) which is a varchar field. I have lots of data that is invalid and need SELECT all records that the right(myfield,5) IS NOT Numeric. Can this be done?
Thanks!
View 2 Replies
View Related
Oct 31, 2005
Not sure how I can convert varchar to numeric values in SQL Server? Trying to do so in Design and get error:
Unable to modify table.
ODBC error: [Microsoft][ODBC Server Driver][SQL Server] Error converting data type varchar to numeric.
Any suggestions?
View 5 Replies
View Related
Dec 11, 2007
Im running a DTS package that converts data in a fixed width text file to SQL table. The package runs successfully, but when I go to dump 60,000+ records in the table I get this error:
"Error Converting data type varchar to numeric."
Is there a way that I can isolate where the offending values are located so I can manually correct them?
View 4 Replies
View Related
Jul 20, 2005
Hi again all,I have a small issue. Here's an example dataset :F1 F2 F31 0.58 Hi2 0.70 Hello3 Fail Bye4 <Null> HiWhen I write this statement :SELECT SUM(CONVERT(DECIMAL(16,8),F2)) MySumFROM T1WHERE IsNumeric(IsNull(F2,'X'))=1I get "Cannot convert a Varchar value to Numeric" error. From what Iunderstand, it somehow tries to convert to a decimal(16,8) BEFORE filteringthe nulls and the non-numeric out. (Keep in mind that the actual table hasover 1.5Million records).Any idea on how to get around that ?Thanks,Michel
View 1 Replies
View Related
Jan 28, 2008
I am trying to change a value in a table. For instance the value is now 3. If I try to change the value to say 2 or 4 I get and error converting data type varchar to numeric. So wazzagoingon?
View 6 Replies
View Related
Apr 12, 2008
Hi i have a insert stored procedure, which i need to insert a label.text which is 12.99
the problem i have is that it is inserting as 13.00 any ideas what i need to do??Dim Price As Decimal = CostLabel.Text then i am inserting with this param....
command113.Parameters.Add("@Cost", SqlDbType.Decimal).Value = Price
View 4 Replies
View Related
Dec 23, 2003
Im trying to insert a decimal into SQL 2000 using a stored procedure. I can successfully insert it using a direct T-SQL statement inside the code, but I cant insert it correctly when calling for a stored procedure.
For instance 12.5 will insert as 12.
Here is my SQL Parameter code:
[code]
MyCommand.Parameters.Add(New SqlParameter("@Num", SqlDbType.Decimal))
MyCommand.Parameters("@Num").Precision = 5
MyCommand.Parameters("@Num").Scale = 2
MyCommand.Parameters("@Num").Value = Convert.ToDecimal(TextBox1.Text)
[/code]
I also declared @Num to be a decimal in my Stored Procedure.
As you can see I give the Parameter more than enough detail about the data type as well as convert the textbox value to a decimal, but it still rounds the value to an integer like data.
Again using a direct T-SQL statement inside the code works OK, but the stored procedure will not.
ANyone got any ideas why this is happening.
View 1 Replies
View Related
Feb 1, 2006
how i convert varchar sal field to numeric in query
select sum(sal) from emp1
error:the sum or average aggregate operation cannot take a varchar data type as an argument.
View 1 Replies
View Related
Jan 4, 2000
I am not sure if this is the right place, but here's my question:
with a field being varchar, can only the rows that are numeric be selected? For example-
ID Data1
1 don
2 jerry
3 3030
4 1234
5 susan
6 4321
Does SQL have an IsNumeric type function that can be used in the where clause?
Don
View 2 Replies
View Related
Feb 11, 2003
Hi all,
I have a field defined as varchar(8) but this field should not contain any letters, needs to be only numbers. How can I validate the data if it contains only numbers? Any ideas?
Thanks,
Jannat.
View 5 Replies
View Related
Feb 2, 2013
when i execute my store procedure it give this error.
USE [CWMNEW]
GO
DECLARE@return_value int
EXEC@return_value = [dbo].[BOQ]
SELECT'Return Value' = @return_value
GO
[code]....
View 1 Replies
View Related
Sep 1, 2013
I have a varchar(len=9) field that I want to cast as numeric(9,2). Some of the field values are null but some have valid values (ie 1.00 or .05).
I am selecting data from one table and then updating a different table.
I have a select statement within an insert statement and then an update statement. I've tried a cast statement but not successfully. I get the following error.
[Execute SQL Task] Error: Executing the query "Exec sp_ESTLoadPOData" failed with the following error: "Error converting data type varchar to numeric.". Possible failure reasons:
Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
View 3 Replies
View Related
Jan 21, 2008
Hi All,
I have 2 varchar fields on MS 2005 table
First field is date and format is 080118(YYMMDD)
and second is salary field like 00002000(positive) and 00002000- (negative)
how can I move them to date and numeric fields on another table....
thanks
View 1 Replies
View Related
Jun 21, 2007
Hi,
I have a flat file whose data looks like this:
"Opening Balance", Acct1234, 1001.01
"Closing Balance", Acct1234, 1001.01
In my script component for "Opening Balance", I set my output columns like this:
Row.AccountNumber = CDate(rowValues(1)
Row.OpeningBalance = CDec(rowValues(2))
Row.ClosingBalance = Nothing
Because I don't have a value for ClosingBalance in this row, I set ClosingBalance = Nothing.
And for "Closing Balance", I set my output columns like this, because there's no value for OpeningBalance.
Row.AccountNumber = CDate(rowValues(1)
Row.OpeningBalance = Nothing
Row.ClosingBalance = Nothing
Then, in my column mappings I map OpeningBalance = OpeningBalance and ClosingBalance = ClosingBalance.
The idea being that if there's no value, then it should be set to NULL. However, in my table, I see that instead of NULLs, there's 0.00000. Which is not what I want to see.
Any ideas why this is happening?
Thanks
View 5 Replies
View Related
Jul 9, 2007
hi all
I have a problem with SQL rounding my decimals up when I pull them from a temp table that has the column set as VARCHAR. What is happening is I am pulling the info from a flat file but each column has "" around each field so I must make the temp table columns all VARCHAR so I may pull the info from the file properly. So after the info has been extracted, I run an update statement on the temp table to remove all quotes. Once this is done, the revised info is inserted into a staging table and any field that is a represented as a decimal is labled as such in the staging table.
What I am running into is when the info is inserted into the staging table, the decimals are rounded up to whole values. The column has been checked to verify that it is indeed a decimal. I even have a CAST statement in the insert hoping to combat the rounding issue, but it is not helping.
So what reason(s) would my decimals be rounding up?
Thanks alot
View 3 Replies
View Related
Jan 10, 2012
I have a field in my database that is stored as varchar. The values are usually contain a decimal, and should have really been a float or decimal. In order for me to do analytics in my BI environment, I need to convert this to a float or decimal.
eg of values.
10.00
20.00
0.00
15.00
or could be missing when I use cast(value as float) or cast(value as decimal(9,2)) or convert(float, value) I get an error
Msg 8114, Level 16, State 5, Line 2
Error converting data type varchar to numeric.
View 2 Replies
View Related
Apr 25, 2008
Hi All,
I have a table Saleshistory with 89481412 records. I have a field Sales of nvarchar type, all the records in this field are numeric, and the records are with 2 decimal places. I expect all the records to be ending at .00 (for example 5.00,345.00,25.00), but I want to verify if something is for example 5.6 etc.
So in short I want to check if any Salesrecords have more than zero values in the decimal. How can I check this.
Please help.
Thanks,
Zee
View 8 Replies
View Related
Aug 12, 2002
DB is SQL 2000 and I'm trying to convert a field datatype from varchar to numeric where the data is hours:minutes:seconds (05:52:12), but I run into errors with EM and scripts that the db cannot convert those datatypes. I've tried the cast function with same results ... any solutions?? I need to run SUM(), AVG(), etc, against the data and can't with VARCHAR type.
Thanks all
-Greg
View 1 Replies
View Related
Dec 10, 2014
I have a sql code that I am having some difficulty with. All I'm trying to do is get each department and sum the amount by month based on the date in the table. I am getting "error converting data type varchar to numeric".
Code:
select DEPARTMENT,
CASE
WHEN ((DATE >= '06/01/2014') AND (DATE <= '06/30/2014')) THEN (cast(sum(Amount) as decimal(10,2)))
ELSE '' END AS 'JUNE',
CASE
WHEN ((DATE >= '07/01/2014') AND (DATE <= '07/30/2014')) THEN (cast(sum(Amount) as decimal(10,2)))
ELSE '' END AS 'JULY'
from L27_PHAROS_DETAIL_DATA
WHERE Department = 'TECHNOLOGY SERVICES'
GROUP BY DEPARTMENT, DATE
ORDER BY DEPARTMENT
View 5 Replies
View Related