Insertion / Updation Problem In SSIS
May 30, 2006
€œI have a scenario where i am trying to insert 200,000 lac records & update 200,000 lac record in destination table using SISS Package (SQL SERVER 2005) but I am not able to neither update nor insert the records . while executing the package its not showing any error also . what could be the problem ? €œ
We have business logic in Package creation 1) Insert New records and 2) Update Existing Records using the follow Data flow diagram
For update we are using OLEDB command, for insert we are using OLEDB Destination.
We are using merge join for spliting record into insert and update.
View 7 Replies
ADVERTISEMENT
May 25, 2006
HI,
How to create package in SSIS by applying the business Logic like if the record already exist it should be and update else it should be an insert in the destination table. how to achive this funcality in SQL SERVER 2005 (Business Intelligence studion).
Thanks & Regards
Nagaraj.S
View 4 Replies
View Related
Oct 12, 2007
Hi,
I ran my package and it was successfu. I tried running it again, but this time it throws me this error:
Dim_T_Account [56575]: Unable to prepare the SSIS bulk insert for data insertion.
Error: 0xC004701A at CallerType, CallerChannel, Dealer, DODealer, HotlineType, Model, Reg'l Signal Code, Account, Contact, DTS.Pipeline: component "Dim_T_Account" (56575) failed the pre-execute phase and returned error code 0xC0202071.
Information: 0x40043008 at CallerType, CallerChannel, Dealer, DODealer, HotlineType, Model, Reg'l Signal Code, Account, Contact, DTS.Pipeline: Post Execute phase is beginning.
Why suddenly without changing anything, i encountered this error? What does it mean it cannot prepare the SSIS bulk insert. My connection to server is working ok.
cherriesh
View 9 Replies
View Related
Oct 24, 2007
Hi,
I am using SQL Server Destinations in my data flow tasks. I'm running this package in the server until i encountered this error:
OnError,,,LOAD AND UPDATE Dimension Tables,,,10/24/2007 1:22:23 PM,10/24/2007 1:22:23 PM,-1071636367,0x,Unable to prepare the SSIS bulk insert for data insertion.
OnError,,,Load Dimensions,,,10/24/2007 1:22:23 PM,10/24/2007 1:22:23 PM,-1071636367,0x,Unable to prepare the SSIS bulk insert for data insertion.
OnError,,,Discount Reason, ISIS Condition, ISIS Defect, ISIS Repair, ISIS Section, ISIS Symptom, Job Status, Parts, Purchase SubOrder Type, Service Contract, Service Reason, Service Type, TechServiceGrp, WarrantyType, Branch, Wastage Reason,,,10/24/2007 1:22:23 PM,10/24/2007 1:22:23 PM,-1073450974,0x,SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Dim_T_ISISDefect" (56280) failed with error code 0xC0202071. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
What could be the reason for this? I don't usually have an error.
cherriesh
View 6 Replies
View Related
Jan 15, 2008
Having searched the forum, this one clearly has form... However beyond assisting those who have fallen at the first hurdle (i.e. forgetting/not knowing that they cannot execute the package remotely to the instance of SQL Server into which they are inserting), the issues raised by others have not been addressed. Thus I am bringing nothing new to the table here - just providing an executive summary of problems which others have run into, written about, but not received answers for.
First the complete error:
Description: Unable to prepare the SSIS bulk insert for data insertion. End Error Error: 2008-01-15 04:55:27.58 Code: 0xC004701A Source: <xxx> DTS.Pipeline Description: component "<xxx> failed the pre-execute phase and returned error code 0xC0202071. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 4:53:34 AM Finished: 5:00:00 AM Elapsed: 385.384 seconds. The package execution failed. The step failed.
Important points
It mostly works - It produces no error more than 9 times out of 10.
It fails on random dataflows - My package has several dataflows, (mostly) executing concurrently. Where the error occurs it does not do so on the same dataflow each time: on one run it'll fail on dataflow A whilst B,C,D and E succeed, then A-E will all succeed (and continue doing so for the next ten runs thereafter), and then the error recurs for dataflow D, with A,B,C and E all succeeding.
Hope someone has something interesting to say,
Tamim.
View 10 Replies
View Related
Jan 3, 2008
Hi All SSIS experts,
Happy 2008!!!!
I am inserting data into a tab delimted text file using SSIS package.
After data insetion some extra tabs get added between columns in some rows in the text file.
Can we programmatically delete the extra tabs from the text file, if so how to use/implement the code inside the SSIS package?
Any pointer/suggestions are welcome.
Thanks & Regards,
View 9 Replies
View Related
Jun 18, 2007
Hello,
I want to update a field value with its default constraint value defined. how can i do that?
Suppose if it is a Date field, my default date value is 1/1/2000 and currently it contains 6/18/2007, i would like to know how can we update this field with default value.
Thanks for all your help,
General Problem
View 2 Replies
View Related
Apr 22, 2008
I have table in that created column is there
it has the data like
23
24
45
45
43
67
by mistake if i updated that column as 77
can we roolback to old date
View 1 Replies
View Related
Jul 14, 2000
Hi all,
I am using the odbc connector to get a local table. I want that table to get populated every night automatically. How can i do that? Also i want to check if any existing record is updated/changed in the dsn database. Any help is highly appreciated.
Thanks,
Jeff.
View 1 Replies
View Related
Nov 20, 2000
Hi Guys,
When iam trying to update the table with the field called "openstatus" is smallint . Iam trying to do following like this
update table1
set openstatus=2 where openstatus=NULL
But
iam getting error like this:
"Syntax error converting the varchar value 'NULL' to a column of data type smallint."
Could you please let me how to solve this proble. i really appreciate it.
Thanks in advance
Garir
View 2 Replies
View Related
Jan 18, 2005
In SQL SERVER if there is failure during updation of certain rows, what will be the state?
View 3 Replies
View Related
Sep 11, 2007
Dear all,
i've one database in my server namely mydb1, and another database mydb2. same type of tables are there. in those tables, when ever developers are entering data, that should be automatically updated here also.
i think replication suits this.
daily maximum 200 transactions may occur in the mydb1.
if replication suits this, which replication can i use..and please guide me for the process....
and one more doubt...actually only 22 tables out 0f 1300 tabls will modify regularly... rest of those are not changed frequently...
Vinod
Even you learn 1%, Learn it with 100% confidence.
View 7 Replies
View Related
Mar 12, 2008
hi i cant update the values in the table from data base if i do so an error message will show as below
No row was updated .
The data in row 37 was not committed.
Error Source: Microsoft.VisualStudio.DataTool.
Error Message: The row values updated or deleated either do not make the row unique or they alter multiple rows(2 rows)
View 2 Replies
View Related
Jan 19, 2004
Hello all
i am trying to update the database with the DataSet (Updated from the DataGrid) but it is giving the error as
"Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information."
the code is as follows
public DataSet bindControlToGrid(DataSet dataSet)
{
SqlConnection objConn= null;
SqlCommand objComm = null;
try
{
objConn = new SqlConnection(@"User ID=sa;Password=sa;database=ExtraNet;server=EAGLESEAGLES");
SqlDataAdapter objAdapter=new SqlDataAdapter();
objAdapter.SelectCommand= new SqlCommand("SELECT sUserID,sUserName FROM tblUser WHERE dUserDeActivated IS NULL ORDER BY sUserName,nUsrSerialNo",objConn);
SqlCommandBuilder sqlCommandBuilder = new SqlCommandBuilder(objAdapter);
objConn.Open();
DataSet objdataSet= new DataSet("ko");
string d = (dataSet.Tables[0].Rows[0].ItemArray.GetValue(0).ToString());
objAdapter.Fill(objdataSet);
objAdapter.Update(dataSet);
objAdapter.Dispose();
}
catch(Exception ex)
{
string s= ex.Message;
}
finally
{
//objComm.Dispose();
objConn.Close();
}
return dataSet;
}
kindly help
View 1 Replies
View Related
Jul 20, 2004
i have a table which have 64 columns.
Problem:
When i update a column through stored procedure like
Column1=400
then after update when i see that value which is 100 but that will 400
So how this problem occured.
View 1 Replies
View Related
Nov 23, 2006
I am updating a table in store procedure. I want to check whether the statement has successfully updated the table or not. i know in mySql i can handle it using ROW_COUNT() function. but how can i do it in MS-SQL?
View 2 Replies
View Related
May 1, 2007
Dear Folks,
Is it possible to update sys.databases table?
i need to update one column in this table.........
but it is showing some error
Msg 259, Level 16, State 1, Line 2
Ad hoc updates to system catalogs are not allowed.
how can i update this table?
Vinod
View 4 Replies
View Related
Jul 11, 2011
I have a table having 1 column whose value have to update,the column is encrypted using symmetric encryption. Value in column is 0 in char form, I have to increment it, when retrieving it return 0 to increment i have to convert it to int,it becomes 48 after increment it is 49 after conversion to char it becomes 1. It is going right upto 9 after 10 it jumps to very large number on increment.
View 5 Replies
View Related
Mar 13, 2006
Hi,
I am trying to set up Transactional replication with immediate
updation.
The configuration is as follows:
1. Publisher is SQL server 2000 Enterprise Edition, and Distributor is
on the same server.
2. Publisher SQL server Standard Edition is installed on Windows 2003 with sp1.
3. Subscriber is an SQLServer 2000 Evaluation version on Windows
Professional 2000 with sp2.
When I set up the Publisher with transactional replication with
immediate updation only, the set up was successful.
I subscribed 2 instances of SQL server from Windows 2000 professional
on the local LAN in the same domain. The set up went fine.
When I update from the publisher end the updation is successfully
replicating to all the subscribers. But when I try to insert any
records in any one of the subscribers, I am getting the following
error:
[Microsoft] [ODBC SQL Server Driver ][SQL Server
][DBNETLIB][ConnectionOpen(Connect()).] SQL Server does not exists or
access denied.
I am beginner to this replication technology, but I have to set up in
my organisation. Please anybody help me in figuring out the actual
problem and resolving it.
Thanks in advance.
Prashant N M
View 4 Replies
View Related
Apr 28, 2008
Please someone help to get out this situation
How to perform bulk insertion in a table for different records
View 4 Replies
View Related
Jun 10, 2008
How to bold a value while inserting into the table in SQL 2005?
View 1 Replies
View Related
Apr 3, 2006
How to get information , if there is no insertion of a row in a table within particular span of time.
View 2 Replies
View Related
Jun 10, 2008
Hi guys,
Here's something that I need to do. Might be pretty simple for you guys. :)
I have a table of Employees. All the employees work in some departments. So, I have a table of Department too. Employee table consists of details like EmpID, FirstName, LastName, SAP etc.
Dept table consists of TeamID, TeamNo.
Now, I have another table called as Emp-Team. This table basically maps the employees to the department by taking EmpID and TeamID. There's one more column in this table which is date. This date is required because when some person resigns (say today) then he won't feature in the headcount for July 08 but till June 08 he was there and this is how I maintain my history. e.g All the employees in the Emp_Team table have date as 01/06/2008 for this month. So, in future if I query for the employees who worked in June I will get this list.
Now, I want to copy all this data in the same table again and want to remove any people who have resigned. Their resignation status is in the Employee table, where you have their last working date as well. So, when I add all this data with date 01/07/2008 I want to remove any employees whose last working date is before that.
Can this be done or I have to change my design? In case it can be - How?
Thanks a lot! :)
View 18 Replies
View Related
Mar 23, 2007
I am using vs2005 and sqlserver2000
My problem is i have 5 checkboxes and some textboxes.In this user selects the checkbox and textboxes dynamically .In this user selects one or two or three or when user selects header checkbox then all checkboxes are selected.And in my database i mentioned a single column for group of checkboes.So how should i insert the data into database
dim con as new sqlconnection("userid=sa;pwd=; initial catalog=test")
dim cmd as sql command
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
cmd.CommandText = "insert into check values(" what should i write here ....'" & text.text &"','" @ text2.text "'... ")
con.open()
cmd.executenonquery()
con.close()
End Sub
View 2 Replies
View Related
Nov 26, 2007
Hi,
I am working on an application that is to read a large number of XML files, take out specific values from each file, and store these in a SQL server so that reports can be generated from these values. There are some 15-20,000 files for each month of the year. I am OK with parsing the files and getting the fields that I need but I don't want to insert one record at a time as I parse the files. I was told that I can create a .exe file that parses the xml files and stores the required values in a csv file and use these csv files to initiate a bulk insert, using Business Intelligence Studio. I have not been able to find any info or article on how to do this. Any help on how I can accomplish this, or alternate solutions is greatly appreciated.
View 2 Replies
View Related
Jun 19, 2005
Hi guys,i want to make a scheduled job that inserts 10 user defined row each minute continously in enterprise manager
View 1 Replies
View Related
Jun 10, 2008
Hi Experts ,
I want to insert datas randomly to all columns of a table.The columns have different datatypes like int,varchar,datetime. What to do??? It is urgent so please help.
TIA
RKNAIR
View 2 Replies
View Related
Jun 10, 2008
Hi Experts ,
I want to insert datas randomly to all columns of a table.The columns have different datatypes like int,varchar,datetime. How to create a procedure for the same??? please help.
TIA
RKNAIR
View 1 Replies
View Related
Jun 18, 2008
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[usp_World_Ins_data]
-- Add the parameters for the stored procedure here
@UserName nvarchar(50),
@Password nvarchar(15),
@Email nvarchar(100),
@IsChecked bit,
@ReceiveNews bit
AS
BEGIN
SET NOCOUNT ON;
IF EXISTS(SELECT UserName FROM World_Registration WHERE UserName=@UserName)
RAISERROR('Username exists',16,1)
ELSE IF EXISTS(SELECT Email FROM World_Registration WHERE Email=@Email)
RAISERROR('Email exists',16,1)
ELSE
INSERT INTO World_Registration(UserName,Password,Email,IsChecked,ReceiveNews)
VALUES(@UserName,@Password,@Email,@IsChecked,@ReceiveNews)
END
if executed once it works properly like
[usp_World_Ins_data] 'aa','aa','ravinderpal@netbiz.in','1','1'
while if i m trying to execute stored procedure like this three times
i mean more than one time
[usp_World_Ins_data] 'aa','aa','ravinderpal@netbiz.in','1','1'
[usp_World_Ins_data] 'aa','aa','ravinderpal@netbiz.in','1','1'
[usp_World_Ins_data] 'aa','aa','ravinderpal@netbiz.in','1','1'
it gives error:
Msg 170, Level 15, State 1, Line 2
Line 2: Incorrect syntax near 'usp_World_Ins_data'.
pls help me
View 3 Replies
View Related
Mar 1, 2006
i am new to sql server
i want to insert five rows continously in sql server database.
my problem is like this .
i am inserting user datails. i want to get the userid which is an identity column.with the userid i want to insert userid and roleid in another table.Roleid values 1 to 5. ie constant.
an sql procedure is required.
View 10 Replies
View Related
Jul 20, 2005
Hi everyone,I tried to upload my database to my web host. Nevertheless as they donot give me enough permission to perform some DTS thus I have togenerate script to do it myself. The problem is MSSQL scriptgeneration operation can only generate the definitions of the objects,no data insertion sql is created.So is there any method to create insertion script for all the tablesin my database (they have automated increment key as well)Hope for your response!Thank you
View 2 Replies
View Related
Oct 4, 2007
I have a table called ACCOUNTS which has 60,000 rows already in it. It has a columns called PolicyNo and PremiumBasisCode. PolicyNo has data inside it whereas Premiumbasiscode is NULL.
Now I have to insert the data inside the PremiumBasisCode Column from Table1 into ACCOUNTS table by joining them on Policy No (Inner Join).
One thing to remember, there are already 60,000 rows for which this insert needs to take place. What will be the best approach.
Chintan
View 4 Replies
View Related
Sep 13, 2006
I am working in ASP.Net2.0 and Sql server 2005.Using asp button(FormView) I am trying to insert the data from the form into the database and at the same time want to move on to another page indicating the succes of insertion.My code: <asp:Button ID="InsertButton" runat="server" CausesValidation="True" CommandName="Insert"Text="Submit" PostBackUrl="~/ClinicDownload.aspx"></asp:Button> It is moving on to another page, but no insertion is taking place. If I don't give the PostBackUrl then I can insert. I want to do both in one click....Hope someone can help me. Regardspreeshma
View 1 Replies
View Related
