I've been trying to install SQL Server express edition all day and it errors out every time. I've tried it on two different servers and I get the same errors. Here's what the error log says:
2007-04-20 16:37:52.77 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 5.2 (Build 3790: Service Pack 2, v.2825)
2007-04-20 16:37:52.77 Server (c) 2005 Microsoft Corporation.
2007-04-20 16:37:52.77 Server All rights reserved.
2007-04-20 16:37:52.77 Server Server process ID is 1356.
2007-04-20 16:37:52.77 Server Authentication mode is MIXED.
2007-04-20 16:37:52.77 Server Logging SQL Server messages in file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-04-20 16:37:52.77 Server This instance of SQL Server last reported using a process ID of 1964 at 4/20/2007 4:37:47 PM (local) 4/20/2007 8:37:47 PM (UTC). This is an informational message only; no user action is required.
2007-04-20 16:37:52.77 Server Registry startup parameters:
2007-04-20 16:37:52.77 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-04-20 16:37:52.77 Server -e c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-04-20 16:37:52.77 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-04-20 16:37:52.77 Server Command Line Startup Parameters:
2007-04-20 16:37:52.77 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf
2007-04-20 16:37:52.77 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf
2007-04-20 16:37:52.77 Server -m SqlSetup
2007-04-20 16:37:52.77 Server SqlSetup
2007-04-20 16:37:52.77 Server -Q
2007-04-20 16:37:52.77 Server -q SQL_Latin1_General_CP1_CI_AS
2007-04-20 16:37:52.77 Server -T 4022
2007-04-20 16:37:52.77 Server -T 3659
2007-04-20 16:37:52.77 Server -T 3610
2007-04-20 16:37:52.77 Server -T 4010
2007-04-20 16:37:52.79 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-04-20 16:37:52.79 Server Detected 1 CPUs. This is an informational message; no user action is required.
2007-04-20 16:37:52.88 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-04-20 16:37:52.92 Server Database Mirroring Transport is disabled in the endpoint configuration.
2007-04-20 16:37:52.93 spid5s FCB:pen: Operating system error 5(Access is denied.) occurred while creating or opening file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf'. Diagnose and correct the operating system error, and retry the operation.
2007-04-20 16:37:52.97 spid5s FCB:pen failed: Could not open file c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf for file number 1. OS error: 5(Access is denied.).
2007-04-20 16:37:52.98 spid5s Unable to open the physical file "c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf". Operating system error 5: "5(Access is denied.)".
2007-04-20 16:37:53.05 spid5s FCB:pen: Operating system error 5(Access is denied.) occurred while creating or opening file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2007-04-20 16:37:53.05 spid5s FCB:pen failed: Could not open file c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf for file number 2. OS error: 5(Access is denied.).
2007-04-20 16:37:53.05 spid5s Unable to open the physical file "c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf". Operating system error 5: "5(Access is denied.)".
I can't get the download to work...i've tried regular sql server express 2005, the express for sp2 and the express with advanced services. I keep getting this message after the native client and support files are installed.."This application has failed to start because XOLEHLP.dll was not found. Re-installing the application may fix this problem."Then right after that message is says... "Failed to load SQLSpars.dll"
I have attempted a full install of 2005 Ent on our W2k3 Enterprise server. When attempting to install all services (SQL Svr database, analysis, reporting, notification, integration, client services/components) I get the message: "The features specified are not valid for this edition of SQL Server". I got the same thing when attempting to install with various subsets of services. Then I tried just database services and client components and got the message: " There was an unexpected failure during the setup wizard. "
Perusing the core.log, I see:
Fatal Exception caught while installing package: "10"
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
I can't get the download to work...i've tried regular sql server express 2005, the express for sp2 and the express with advanced services. I keep getting this message after the native client and support files are installed.."This application has failed to start because XOLEHLP.dll was not found. Re-installing the application may fix this problem."Then right after that message is says... "Failed to load SQLSpars.dll"
Trying to install SQL Server 2005 x64 Enterprise Edition during the "Workstation components, etc." part of the install, the install stops and gives me this error.
---------------------- Microsoft SQL Server 2005 Setup Failed to install and configure assemblies C:Program Files (x86)Microsoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024893 Error message: The system cannot find the path specified. Error description: Could not load file or assembly 'System.EnterpriseServices.Wrapper.dll' or one of its dependencies. The system cannot find the path specified. [Abort] [Ignore] [Retry]
----------------------
This install is being attempted on 3 seperate servers all running Windows Server 2003 R2 Enterprise x64 Edition (Service Pack 2).
Futher notes: Distributed Transaction Coordinator services is setup and running (started). I checked to make sure there are no MSMQ components in the COM+ Application struture in Component Services.
I am using installshield to distribute SQL Server 2005 Express. I have the SQLEXPR.EXE file and I want to run it in /qb mode so the user can see the pretty dialogs pop up but not have to click anything.
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG I reveived the following error. how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507). . . . . . . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736). CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . . . . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875). Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
I am currently running Windows XP Professional Service Pack2. It already has MSDE & SQL Server 2000 installed (although I just uninstalled MSDE in the vain hope that it might present the installer with a more straightforward upgrade).
I have tried installing with the default instance & a new instance (I don't really care - I just need to install the darn thing). I just want the basic database & Books On-line, nothing fancy.
Here is the Summary log, for what it's worth:
Microsoft SQL Server 2005 9.00.1399.06 ============================== OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600) Time : Tue Feb 06 16:45:14 2007
Machine : ANTHONYY1 Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLSupport_1.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft SQL Server Native Client Product Version : 9.00.2047.00 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLNCLI_1.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft Office 2003 Web Components Product Version : 11.0.6558.0 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_OWC11_1.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft SQL Server VSS Writer Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SqlWriter_1.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft SQL Server 2005 Backward compatibility Product Version : 8.05.1054 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BackwardsCompat_1.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : MSXML 6.0 Parser (KB927977) Product Version : 6.00.3890.0 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_MSXML6_1.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLSupport_2.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft SQL Server Native Client Product Version : 9.00.2047.00 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLNCLI_2.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft Office 2003 Web Components Product Version : 11.0.6558.0 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_OWC11_2.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft SQL Server 2005 Books Online (English) Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BOL_1.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft SQL Server 2005 Backward compatibility Product Version : 8.05.1054 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BackwardsCompat_2.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : MSXML 6.0 Parser (KB927977) Product Version : 6.00.3890.0 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_MSXML6_2.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : SQLXML4 Error : Setup is preparing to continue with the installation. --------------------------------------------------------------------------------
Here is the SQLSetup0011_ANTHONYY1_Core(Local).log
Microsoft SQL Server 2005 Setup beginning at Tue Feb 06 16:45:14 2007 Process ID : 2560 C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0 Running: LoadResourcesAction at: 2007/1/6 16:45:14 Complete: LoadResourcesAction at: 2007/1/6 16:45:14, returned true Running: ParseBootstrapOptionsAction at: 2007/1/6 16:45:14 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0 Complete: ParseBootstrapOptionsAction at: 2007/1/6 16:45:14, returned true Running: ValidateWinNTAction at: 2007/1/6 16:45:14 Complete: ValidateWinNTAction at: 2007/1/6 16:45:14, returned true Running: ValidateMinOSAction at: 2007/1/6 16:45:14 Complete: ValidateMinOSAction at: 2007/1/6 16:45:14, returned true Running: PerformSCCAction at: 2007/1/6 16:45:14 Complete: PerformSCCAction at: 2007/1/6 16:45:14, returned true Running: ActivateLoggingAction at: 2007/1/6 16:45:14 Complete: ActivateLoggingAction at: 2007/1/6 16:45:14, returned true Running: DetectPatchedBootstrapAction at: 2007/1/6 16:45:14 Complete: DetectPatchedBootstrapAction at: 2007/1/6 16:45:14, returned true Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions: Condition "EventCondition: __STP_LaunchPatchedBootstrap__2560" returned false. Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions: Condition "Setup is running locally." returned true. Running: PerformDotNetCheck2 at: 2007/1/6 16:45:14 Complete: PerformDotNetCheck2 at: 2007/1/6 16:45:14, returned true Running: InvokeSqlSetupDllAction at: 2007/1/6 16:45:14 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0 <Func Name='DwLaunchMsiExec'> Examining 'sqlspars' globals to initialize 'SetupStateScope' Opening 'MachineConfigScope' for [ANTHONYY1] Trying to find Product Code from command line or passed transform If possible, determine install id and type Trying to find Instance Name from command line. No Instance Name provided on the command line If possible, determine action Machine = ANTHONYY1, Article = WMIServiceWin32OSWorking, Result = 0 (0x0) Machine = ANTHONYY1, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0) Machine = ANTHONYY1, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0) Machine = ANTHONYY1, Article = WMIServiceReadRegWorking, Result = 0 (0x0) Machine = ANTHONYY1, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0) Machine = ANTHONYY1, Article = WMIServiceCIMDataWorking, Result = 0 (0x0) Machine = ANTHONYY1, Article = XMLDomDocument, Result = 0 (0x0) Machine = ANTHONYY1, Article = Processor, Result = 0 (0x0) Machine = ANTHONYY1, Article = PhysicalMemory, Result = 0 (0x0) Machine = ANTHONYY1, Article = DiskFreeSpace, Result = 0 (0x0) Machine = ANTHONYY1, Article = OSVersion, Result = 0 (0x0) Machine = ANTHONYY1, Article = OSServicePack, Result = 0 (0x0) Machine = ANTHONYY1, Article = OSType, Result = 0 (0x0) Machine = ANTHONYY1, Article = iisDep, Result = 0 (0x0) Machine = ANTHONYY1, Article = AdminShare, Result = 0 (0x0) Machine = ANTHONYY1, Article = PendingReboot, Result = 70011 (0x1117b) Machine = ANTHONYY1, Article = PerfMon, Result = 0 (0x0) Machine = ANTHONYY1, Article = IEVersion, Result = 0 (0x0) Machine = ANTHONYY1, Article = DriveWriteAccess, Result = 0 (0x0) Machine = ANTHONYY1, Article = COMPlus, Result = 0 (0x0) Machine = ANTHONYY1, Article = ASPNETVersionRegistration, Result = 0 (0x0) Machine = ANTHONYY1, Article = MDAC25Version, Result = 0 (0x0) ******************************************* Setup Consistency Check Report for Machine: ANTHONYY1 ******************************************* Article: WMI Service Requirement, Result: CheckPassed Article: MSXML Requirement, Result: CheckPassed Article: Operating System Minimum Level Requirement, Result: CheckPassed Article: Operating System Service Pack Level Requirement, Result: CheckPassed Article: SQL Compatibility With Operating System, Result: CheckPassed Article: Minimum Hardware Requirement, Result: CheckPassed Article: IIS Feature Requirement, Result: CheckPassed Article: Pending Reboot Requirement, Result: CheckPassed Article: Performance Monitor Counter Requirement, Result: CheckPassed Article: Default Installation Path Permission Requirement, Result: CheckPassed Article: Internet Explorer Requirement, Result: CheckPassed Article: Check COM+ Catalogue, Result: CheckPassed Article: ASP.Net Registration Requirement, Result: CheckPassed Article: Minimum MDAC Version Requirement, Result: CheckPassed <Func Name='PerformDetections'> 0 <EndFunc Name='PerformDetections' Return='0' GetLastError='0'> <Func Name='DisplaySCCWizard'> CSetupBootstrapWizard returned 1 <EndFunc Name='DisplaySCCWizard' Return='0' GetLastError='183'> Failed to find help file for LCID :2057 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0 <EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'> Complete: InvokeSqlSetupDllAction at: 2007/1/6 16:49:35, returned true Running: SetPackageInstallStateAction at: 2007/1/6 16:49:35 Complete: SetPackageInstallStateAction at: 2007/1/6 16:49:36, returned true Running: DeterminePackageTransformsAction at: 2007/1/6 16:49:36 Complete: DeterminePackageTransformsAction at: 2007/1/6 16:49:47, returned true Running: ValidateSetupPropertiesAction at: 2007/1/6 16:49:47 Complete: ValidateSetupPropertiesAction at: 2007/1/6 16:49:47, returned true Running: OpenPipeAction at: 2007/1/6 16:49:47 Complete: OpenPipeAction at: 2007/1/6 16:49:47, returned false Error: Action "OpenPipeAction" failed during execution. Running: CreatePipeAction at: 2007/1/6 16:49:47 Complete: CreatePipeAction at: 2007/1/6 16:49:47, returned false Error: Action "CreatePipeAction" failed during execution. Action "RunRemoteSetupAction" will be skipped due to the following restrictions: Condition "Action: CreatePipeAction has finished and passed." returned false. Running: PopulateMutatorDbAction at: 2007/1/6 16:49:47 Complete: PopulateMutatorDbAction at: 2007/1/6 16:49:47, returned true Running: GenerateRequestsAction at: 2007/1/6 16:49:47 SQL_Engine = 3 SQL_Data_Files = 3 SQL_Replication = 3 SQL_FullText = 3 SQL_SharedTools = 3 SQL_BC_DEP = 3 Analysis_Server = -1 AnalysisDataFiles = -1 AnalysisSharedTools = -1 RS_Server = -1 RS_Web_Interface = -1 RS_SharedTools = -1 Notification_Services = -1 NS_Engine = -1 NS_Client = -1 SQL_DTS = -1 Client_Components = 3 Connectivity = 3 SQL_Tools90 = 3 SQL_WarehouseDevWorkbench = 3 SDK = 3 SQLXML = 3 Tools_Legacy = 3 TOOLS_BC_DEP = 3 SQL_Documentation = 3 SQL_BooksOnline = 3 SQL_DatabaseSamples = -1 SQL_AdventureWorksSamples = -1 SQL_AdventureWorksDWSamples = -1 SQL_AdventureWorksASSamples = -1 SQL_Samples = -1 Complete: GenerateRequestsAction at: 2007/1/6 16:49:48, returned true Running: CreateProgressWindowAction at: 2007/1/6 16:49:48 Complete: CreateProgressWindowAction at: 2007/1/6 16:49:48, returned true Running: ScheduleActionAction at: 2007/1/6 16:49:48 Complete: ScheduleActionAction at: 2007/1/6 16:49:48, returned true Skipped: InstallASAction.11 Skipped: Action "InstallASAction.11" was not run. Information reported during analysis: No install request found for package: "sqlsupport", referred by package: "as", install will be skipped as a result. Skipped: InstallASAction.18 Skipped: Action "InstallASAction.18" was not run. Information reported during analysis: No install request found for package: "owc11", referred by package: "as", install will be skipped as a result. Skipped: InstallASAction.22 Skipped: Action "InstallASAction.22" was not run. Information reported during analysis: No install request found for package: "bcRedist", referred by package: "as", install will be skipped as a result. Skipped: InstallASAction.9 Skipped: Action "InstallASAction.9" was not run. Information reported during analysis: No install request found for package: "msxml6", referred by package: "as", install will be skipped as a result. Skipped: InstallDTSAction Skipped: Action "InstallDTSAction" was not run. Information reported during analysis: No install request found for package: "dts", install will be skipped as a result. Skipped: InstallDTSAction.11 Skipped: Action "InstallDTSAction.11" was not run. Information reported during analysis: No install request found for package: "sqlsupport", referred by package: "dts", install will be skipped as a result. Skipped: InstallDTSAction.12 Skipped: Action "InstallDTSAction.12" was not run. Information reported during analysis: No install request found for package: "sqlncli", referred by package: "dts", install will be skipped as a result. Skipped: InstallDTSAction.18 Skipped: Action "InstallDTSAction.18" was not run. Information reported during analysis: No install request found for package: "owc11", referred by package: "dts", install will be skipped as a result. Skipped: InstallDTSAction.22 Skipped: Action "InstallDTSAction.22" was not run. Information reported during analysis: No install request found for package: "bcRedist", referred by package: "dts", install will be skipped as a result. Skipped: InstallDTSAction.9 Skipped: Action "InstallDTSAction.9" was not run. Information reported during analysis: No install request found for package: "msxml6", referred by package: "dts", install will be skipped as a result. Skipped: InstallNSAction Skipped: Action "InstallNSAction" was not run. Information reported during analysis: No install request found for package: "ns", install will be skipped as a result. Skipped: InstallNSAction.11 Skipped: Action "InstallNSAction.11" was not run. Information reported during analysis: No install request found for package: "sqlsupport", referred by package: "ns", install will be skipped as a result. Skipped: InstallNSAction.12 Skipped: Action "InstallNSAction.12" was not run. Information reported during analysis: No install request found for package: "sqlncli", referred by package: "ns", install will be skipped as a result. Skipped: InstallNSAction.18 Skipped: Action "InstallNSAction.18" was not run. Information reported during analysis: No install request found for package: "owc11", referred by package: "ns", install will be skipped as a result. Skipped: InstallNSAction.22 Skipped: Action "InstallNSAction.22" was not run. Information reported during analysis: No install request found for package: "bcRedist", referred by package: "ns", install will be skipped as a result. Skipped: InstallNSAction.9 Skipped: Action "InstallNSAction.9" was not run. Information reported during analysis: No install request found for package: "msxml6", referred by package: "ns", install will be skipped as a result. Skipped: InstallRSAction.11 Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis: No install request found for package: "sqlsupport", referred by package: "rs", install will be skipped as a result. Skipped: InstallRSAction.18 Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis: No install request found for package: "owc11", referred by package: "rs", install will be skipped as a result. Skipped: InstallRSAction.22 Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis: No install request found for package: "bcRedist", referred by package: "rs", install will be skipped as a result. Running: InstallSqlAction.11 at: 2007/1/6 16:49:48 Installing: sqlsupport on target: ANTHONYY1 Complete: InstallSqlAction.11 at: 2007/1/6 16:49:51, returned true Running: InstallSqlAction.12 at: 2007/1/6 16:49:51 Installing: sqlncli on target: ANTHONYY1 Complete: InstallSqlAction.12 at: 2007/1/6 16:49:55, returned true Running: InstallSqlAction.18 at: 2007/1/6 16:49:55 Installing: owc11 on target: ANTHONYY1 Complete: InstallSqlAction.18 at: 2007/1/6 16:49:56, returned true Running: InstallSqlAction.21 at: 2007/1/6 16:49:56 Installing: sqlwriter on target: ANTHONYY1 Complete: InstallSqlAction.21 at: 2007/1/6 16:49:58, returned true Running: InstallSqlAction.22 at: 2007/1/6 16:49:58 Installing: bcRedist on target: ANTHONYY1 Complete: InstallSqlAction.22 at: 2007/1/6 16:50:0, returned true Running: InstallSqlAction.9 at: 2007/1/6 16:50:0 Installing: msxml6 on target: ANTHONYY1 Complete: InstallSqlAction.9 at: 2007/1/6 16:50:2, returned true Running: InstallToolsAction.11 at: 2007/1/6 16:50:2 Installing: sqlsupport on target: ANTHONYY1 Complete: InstallToolsAction.11 at: 2007/1/6 16:50:5, returned true Running: InstallToolsAction.12 at: 2007/1/6 16:50:5 Installing: sqlncli on target: ANTHONYY1 Complete: InstallToolsAction.12 at: 2007/1/6 16:50:8, returned true Skipped: InstallToolsAction.13 Skipped: Action "InstallToolsAction.13" was not run. Information reported during analysis: No install request found for package: "PPESku", referred by package: "tools", install will be skipped as a result. Running: InstallToolsAction.18 at: 2007/1/6 16:50:8 Installing: owc11 on target: ANTHONYY1 Complete: InstallToolsAction.18 at: 2007/1/6 16:50:10, returned true Running: InstallToolsAction.20 at: 2007/1/6 16:50:10 Installing: BOL on target: ANTHONYY1 Complete: InstallToolsAction.20 at: 2007/1/6 16:52:2, returned true Running: InstallToolsAction.22 at: 2007/1/6 16:52:2 Installing: bcRedist on target: ANTHONYY1 Complete: InstallToolsAction.22 at: 2007/1/6 16:52:4, returned true Running: InstallToolsAction.9 at: 2007/1/6 16:52:4 Installing: msxml6 on target: ANTHONYY1 Complete: InstallToolsAction.9 at: 2007/1/6 16:52:6, returned true Skipped: InstallNSAction.10 Skipped: Action "InstallNSAction.10" was not run. Information reported during analysis: No install request found for package: "sqlxml4", referred by package: "ns", install will be skipped as a result. Running: InstallSqlAction at: 2007/1/6 16:52:7 Installing: sql on target: ANTHONYY1 Error: MsiOpenDatabase failed with 110 Failed to install package This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package. Error: MsiOpenDatabase failed with 110 for MSI D:ServersSetupSqlRun_SQL.msi Setting package return code to: 1620 Complete: InstallSqlAction at: 2007/1/6 16:52:27, returned false Error: Action "InstallSqlAction" failed during execution. Error information reported during run: Target collection includes the local machine. Invoking installPackage() on local machine. Running: InstallToolsAction.10 at: 2007/1/6 16:52:27 Installing: sqlxml4 on target: ANTHONYY1 Error Code: 0x8007006e (110) Windows Error Text: The system cannot open the device or file specified.
Source File Name: sqlchainingminorbuildactionbehavior.cpp Compiler Timestamp: Mon Jun 13 14:30:04 2005 Function Name: sqls::MinorBuildActionBehavior::modifyRequest Source Line Number: 65
Complete: InstallToolsAction.10 at: 2007/1/6 16:55:59, returned false Error: Action "InstallToolsAction.10" failed during execution. Error information reported during run: Target collection includes the local machine. Invoking installPackage() on local machine. Action "InstallToolsAction" will return false due to the following preconditions: Condition "Action: InstallToolsAction.10 has finished and failed." returned true. Installation of package: "tools" failed due to a precondition. Step "InstallToolsAction" was not able to run. Skipped: InstallASAction Skipped: Action "InstallASAction" was not run. Information reported during analysis: No install request found for package: "as", install will be skipped as a result. Skipped: InstallRSAction Skipped: Action "InstallRSAction" was not run. Information reported during analysis: No install request found for package: "rs", install will be skipped as a result. Skipped: RepairForBackwardsCompatRedistAction Skipped: Action "RepairForBackwardsCompatRedistAction" was not run. Information reported during analysis: Action: "RepairForBackwardsCompatRedistAction" will be skipped due to the following condition: Condition "sql was successfully upgraded." returned false. Condition context: sql failed to upgrade and so the uninstall of the upgraded product will not occur. Error: Action "UninstallForMSDE2000Action" failed during execution. Error information reported during run: Action: "UninstallForMSDE2000Action" will be marked as failed due to the following condition: Condition "sql was successfully upgraded." returned false. Condition context: sql failed to upgrade and so the uninstall of the upgraded product will not occur. Installation of package: "patchMSDE2000" failed due to a precondition. Error: Action "UninstallForSQLAction" failed during execution. Error information reported during run: Action: "UninstallForSQLAction" will be marked as failed due to the following condition: Condition "sql was successfully upgraded." returned false. Condition context: sql failed to upgrade and so the uninstall of the upgraded product will not occur. Installation of package: "patchLibertySql" failed due to a precondition. Skipped: UninstallForRS2000Action Skipped: Action "UninstallForRS2000Action" was not run. Information reported during analysis: Action: "UninstallForRS2000Action" will be skipped due to the following condition: Condition "Action: InstallRSAction was skipped." returned true. Running: ReportChainingResults at: 2007/1/6 16:55:59 Error: Action "ReportChainingResults" threw an exception during execution. One or more packages failed to install. Refer to logs for error details. : 1620 Error Code: 0x80070654 (1620) Windows Error Text: This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
Source File Name: sqlchainingsqlchainingactions.cpp Compiler Timestamp: Thu Sep 1 22:23:05 2005 Function Name: sqls::ReportChainingResults::perform Source Line Number: 3097
---- Context ----------------------------------------------- sqls::HostSetupPackageInstallerSynch::postCommit sqls::HighlyAvailablePackage::preInstall led due to cancel code received from cancel source: 29539
...and here is the SQLSetup0011_ANTHONYY1_SQL.log:
=== Verbose logging started: 06/02/2007 16:52:14 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe === MSI (c) (00:54) [16:52:14:284]: Resetting cached policy values MSI (c) (00:54) [16:52:14:284]: Machine policy value 'Debug' is 0 MSI (c) (00:54) [16:52:14:284]: ******* RunEngine: ******* Product: D:ServersSetupSqlRun_SQL.msi ******* Action: ******* CommandLine: ********** MSI (c) (00:54) [16:52:14:284]: Client-side and UI is none or basic: Running entire install on the server. MSI (c) (00:54) [16:52:14:284]: Grabbed execution mutex. MSI (c) (00:54) [16:52:14:299]: Cloaking enabled. MSI (c) (00:54) [16:52:14:299]: Attempting to enable all disabled priveleges before calling Install on Server MSI (c) (00:54) [16:52:14:299]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (A4:98) [16:52:14:299]: Grabbed execution mutex. MSI (s) (A4:00) [16:52:14:299]: Resetting cached policy values MSI (s) (A4:00) [16:52:14:299]: Machine policy value 'Debug' is 0 MSI (s) (A4:00) [16:52:14:299]: ******* RunEngine: ******* Product: D:ServersSetupSqlRun_SQL.msi ******* Action: ******* CommandLine: ********** MSI (s) (A4:00) [16:52:21:080]: Note: 1: 2203 2: D:ServersSetupSqlRun_SQL.msi 3: -2147024873 MSI (s) (A4:00) [16:52:21:080]: MainEngineThread is returning 1620 MSI (c) (00:54) [16:52:21:080]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (00:54) [16:52:21:080]: MainEngineThread is returning 1620 === Verbose logging stopped: 06/02/2007 16:52:21 ===
I suppose an error dialog (or log message) that actually told you what is wrong and then what to do is too much to ask for. (Or an installer than just copied all the files into place). :(
Log Location: C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log MSP Error: 29537 SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]Cannot find the object 'dm_exec_query_resource_semaphores', because it does not exist or you do not have permission.. To continue, correct the problem, and then run SQL Server Setup again.
I tried to search internet, however, I couldn't get solution.
My SQL server 2005 is standard version, OS Windows server 2003 sp2, I am using Administrator account to install it.
I have compile my application into a Smart Device CAB and also including SQLCE CAB file for SQL.
I have users who choose to install SQLCE into Storage Cards instead and causes the application not to function, when asked which destination to install.
I've done some search and found out about "wceload.exe /noaskdest" but I'm using NSIS to compile into a single .exe file, and its calling "CEAppMgr.exe"
How can I force SQLCE to install into its default directory without asking user?
Win XP Pro SP2IIS 5.1SQL 2005 SP1 (Developer edition)VS 2005 SP1.Net 2.0IE7 (didn't work on IE 6 either)Latest updates from Windows updateI have set up SSRS successfully on several machines. But on a new machine with standard install I have the out of the box SSRS report manager running with issues and would like to resolve them. Report Manager will serve image files from my project. But it won't render deployed reports, not even one which has no data sources. From within VS 2005 the same reports render, no problems. The same reports published to another SSRS machine render fine.The browser erorr message is "Value does no fall within the expected range".Any ideas? Thanks in advance.
Hi,Is it possible to install Enterprise Manager without to install theserver ?Thanks !--J-L M. (Alphomega)ICQ: 149635116Pour m'écrire, cliquer le lien ci-dessoushttp://cerbermail.com/?G5iYdBb2Ce
I've tried looking for a solution in other threads but I couldn't find anything that was completely the same as my situation. I got a new pc at work and I've tried installing SQL Server 2005 on it but everytime I try to install it, regardless of services included or excluded with the install, I cannot get through the install without this error. Below is the excerpt from the Summary.txt log file.
Error Code: -2147024894 MSI (s) (74!98) [17:10:55:858]: Product: Microsoft SQL Server 2005 Tools -- Error 29549. Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894 Error message: The system cannot find the file specified. Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
Error 29549. Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894 Error message: The system cannot find the file specified. Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified. <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='203'> Doing Action: Do_sqlAssemblyRegSvcs PerfTime Start: Do_sqlAssemblyRegSvcs : Mon Nov 12 17:10:55 2007 <Func Name='Do_sqlAssemblyRegSvcs'> Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: 2147942402 Error message: The system cannot find the file specified. Error descrition: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified. Error Code: -2147024894 Windows Error Text: The system cannot find the file specified. Source File Name: sqlcasqlassembly.cpp Compiler Timestamp: Thu Aug 11 01:12:01 2005 Function Name: Do_sqlAssemblyRegSvcs Source Line Number: 155
I've searched for and found similar problems that deal with the microsoft.sqlserver.notificationservices.dll not being found but I haven't found a fix that worked for me. These are the fixes I've refered to thus far.
The answer that seems to fix this problem for everyone is to set the MSDTC service login as the NT AUTHORITYNetworkService account. The problem for me is that this is already set to this profile and I've tried resetting the services and rebooting the machine. I did not have a problem with my old machine, which as far as I can tell, is the same configuration, so I know this install should work.
I'm running Windows XP SP2. This is not the upgrade to SQL Server 2005 SP2, this is the original disk that came with Visual Studio 2005.
Has anyone else faced this issue where changing the MSDTC login wasn't the solution? Also, this is my first post, so I apologize if I've left anything out. Just let me know if you want any other information.
I never installed previous beta versions on my computer before. But now I have some serious problem after an incomplete de-install and a re-install of SQL server 2005 express advanced. I hope anybody can help me to solve this. Because the first installation eas not succesfull I had to do an de-install. I have tried to unstall through start/control panel/ add-remove programms and even there not all programs were removed. And that caused the problem. After that I wanted to re-install again but an msi file was missing. So I did a de-install agian. Tried to re-install again but with a lot of errors. After looking at the library I found a program: Windows Install CleanUp. I installed it and that even gives an error for all programs installed with SQL 2005. After that I ran a program called MsiInv to clean but without any succes because this program reported a run-tim error. I have all reports on my computer but don't know how to attach them. If you think you can help me I could send you all the reports. Regards,
I have never installed sql server before and I didnt know if I just take the sql server 2005 standard edition media and boot off it and do a fresh install that way or do I have to install Windows server
I have been receiving 644 errors on an index for one of my tables. We have dropped and rebuilt the index. Even BCP out, drop the table, create the table and BCP in everything and still have problems.
Has anyone else experienced problems with 644 errors? Did you ever determine the cause and are they any preventative ideas?
Ok, whenever I try to connect, I get the following Error messages:
"SQL Server Registration failed because of the connection failure displayed below. SQL Server does not exist or access denied. ConnectionOpen (Connect())"
"An Error 1069 occured while performing this service operation on the MSSQLServer Service"
I even went as far as uninstalling and reinstalling, but to no avail. Does anyone have an idea what's causing this? It was working fine and then all the sudden one day I start getting these messages and it won't work.
I have a dynamics db that is used for archival purposes and it is not used very often. Now that someone decided to get some info out of it it wont let them. when I run dbcc I get the following message:
Msg 5242, Level 16, State 1, Line 1 An inconsistency was detected during an internal operation in database 'PACIF'(ID:12) on page (1:19451). Please contact technical support. Reference number 6. Msg 8921, Level 16, State 1, Line 1 Check terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors.
I was just wondering if this meant anything to any of you? and since all of my backtapes have the same issue, is there any way to fix it?
Running SQL 05 Standard on a Vista box and I have about had it with Vista. Anytime I try to launch Config Manager I get Cannot connect to WMI provider. You do not have permission or the server is unreachable. So try I googled and tried everything I can fine from http://blogs.msdn.com/echarran/archive/2006/01/03/509061.aspx
C:Program FilesMicrosoft SQL Server90Shared>mofcomp "C:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof" and now I get ..
An error occurred while processing item 10 defined on lines 73 - 79 in file C:s
qlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041001
so I try every possible different permission setting for anything sql server - problem still happening... try procmonitor.. find the registry keys and grant full contorl to all of them.. problem still happending.. run the little fixwmi.cmd I found.. problem still happening..
try to uninstall SQL Server.. NOT - WMI error - try to reinstall over--- NOT WMI error.
What do I need to do to get this working. .this is becoming a serious hinderance to my productivity!!!
what a want to know is if there s a way to log sql server errors on a log file, table, these errors are not sql server logs which already exists, i want to log dead locks, sql server timeout errors vs on sql server or somewhere.
Hi Expert, I have a datagrid which is filtering by a dropdownlist and a search textbox.
The dropdownlist allows to select the column they want to search. The search textbox allows to enter the item they want based on the selection from dropdown. Now I use a StoreProcedure to select the data they need, so I pass-in @DropDownListValue int and some others parameters, such as @ID int, @OrderType varchar(50) ... When I search for ID = 163 Input string was not in a correct format. Then when I check with the SQL Server Profiler, I found out that: exec usp_SelectOrder@DropDownListValue=N'1',@ID=N'163',@OrderType=N'163',@OrderSeries=N'163' ... I already set every parameter's default value to NULL. How can I solve for this? Thanks!!
Why on earth is this not working, It WILL insert if there are NO apostheres (" ' "), but if I say like, "Cedric's Group" It will error out. I thought this approach was suppose to handle this character? Thanks for any insight, String sqlStr = "Insert into cardgroups (username,groupname,insertdt,groupid) values (@username,@groupname,@insertdt,@groupid)";
Imports System.Data.SqlClientImports System.DataImports Microsoft.SqlServerPartial Class _Default Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click End Sub Protected Sub TextBox3_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles TextBox3.TextChanged End Sub Protected Sub SqlDataSource1_Selecting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceSelectingEventArgs) Handles SqlDataSource1.Selecting End Sub Protected Sub Save_Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Save_Button1.Click Dim conn As New SqlConnection() conn.ConnectionString = Data Source=REDSTONE;Persist Security Info=True;User ID=******;Password=******;Unicode=True End SubEnd Class
End of statement expected. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb 'System.Data' is a namespace and cannot be used as an expression. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
Hello to all, On my webPage I have Used one SQLDataSource to access DataBase. Now whenever some error occures it shows error page by default. I am not able to catch Errors and tackle in my way... Furthermore in this new structure of accessing DataBase even I do not know where to write Try... Catch...
Well there's always a first for everything!! I have a SQL 7.0 server on sP1 and ran upgrade to sp3 and recieved error 'error in upgrade script' retry or cancel. When I retried the upgrade ended. I tried to run the upgrade again and it tries continue where it ended before, but the upgrade ends unsucessfully. I even tried extracted the sp3 exe to a diffrent folder and ran the sp3 upgrade with same results.
I started the MSSQL service ok but not able to use Query Analyzer, DTS, EM.
Get the following message:ISQL.EXE - Entry Point not found. The procedure entry point?DeleteRow@CDataCTLStorage@@UAEJJPAPAG@Z could not be located in the dynamic link library SQLGUI.dll
I get similar msgs when trying to open DTS, Enterprise manager from the server. The user databases and appear to be ok. I am able to get to Query Analyzer, etc. from my worksation fine.
Has anyone encountered this before? Is there a fix for it or do I need to rebuild the server from SP1 and restore the databases, etc.??
It gives following errors 1.time out 2.general network failure
* Are these due to large number of online connnections *If so what is the maximum number of connections possible *what is the hardware requirement to avoid this *what is the impact on stored procedures *How to tune the server to overcome the problems *I'm currently using the standard edition what is the impact on enterprise edition
