Hello.
Has anyone attempted and successfully installed SQL Server 2000 SP4
via remote desktop on the cluster.
The reason I am asking is that SP4 readme file has this:
"...
4.3 Systems Management Server Distributed Installation
You cannot install Database Components SP4 from a remote location.
..."
Currently SQL Server has SP3a installed.
Thank you in advance.
My question is, is it possible to connect to an SQL database using the MSDE 2000 SP3a edition over the internet? And if so, how do I set it up? Thank you in advance.
View 1 Replies View RelatedI am trying to install SQL Server 2012 onto an already configured and validated windows failover cluster (server 2012) but the process is hanging after installing the setup files.
The last entry in the log is:
running discovery on remote machine
and I've left it hanging like this for 4 hours and nothing happens.
I have a Cluster environment that has SQL 2000 Enterprise installed. I would like to install SQL 2005 Enterprise as well. What should I watch out for. Do I need to specify a named instance for the 05 install, setup is giving me the option and does see the 2000 instance? Is there a document that walks through this installation?
Regards
I'm in the process of attempting to install Microsoft SQL Server Desktop Engine on my computer in support of an email program call Mailloop6. I've tried going through their tech support but they haven't been able to figure it out.
I'm running Windows XP with SP1 upgrade on a DSL connection.
When I installed the program the first time, I got the following error:
"Setup failed to configure the server. Refer to the server error logs and
setup error logs for more information."
The program obviously wouldn't install. I contacted the vendor and they sent a version with a batch file. Same result. I removed all the appropriate registry entries between installs and removed all the data files as well.
I've tried installing the program using the free MDSE download from the MS site with the following result:
"A Strong SA password is required for security reasons. Please use SAPWD switch to supply the same. Refer to readme for more details. Setup will now exit."
Here's the error log that I got after attempting to install:
2004-02-25 19:31:42.55 server Microsoft SQL Server 2000 - 8.00.760 (Intel X86)
Dec 17 2002 14:22:05
Copyright (c) 1988-2003 Microsoft Corporation
Desktop Engine on Windows NT 5.1 (Build 2600: Service Pack 1)
2004-02-25 19:31:42.55 server Copyright (C) 1988-2002 Microsoft Corporation.
2004-02-25 19:31:42.55 server All rights reserved.
2004-02-25 19:31:42.55 server Server Process ID is 3404.
2004-02-25 19:31:42.55 server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL$MAILLOOP6LOGERRORLOG'.
2004-02-25 19:31:42.56 server SQL Server is starting at priority class 'normal'(1 CPU detected).
2004-02-25 19:31:42.60 server SQL Server configured for thread mode processing.
2004-02-25 19:31:42.60 server Using dynamic lock allocation. [500] Lock Blocks, [1000] Lock Owner Blocks.
2004-02-25 19:31:42.63 spid3 Warning ******************
2004-02-25 19:31:42.63 spid3 SQL Server started in single user mode. Updates allowed to system catalogs.
2004-02-25 19:31:42.63 spid3 Starting up database 'master'.
2004-02-25 19:31:42.91 server Using 'SSNETLIB.DLL' version '8.0.766'.
2004-02-25 19:31:42.94 spid5 Starting up database 'model'.
2004-02-25 19:31:43.24 server SQL server listening on 152.163.0.0: 4113.
2004-02-25 19:31:43.24 server SQL server listening on 172.16.1.33: 4113.
2004-02-25 19:31:43.24 server SQL server listening on 127.0.0.1: 4113.
2004-02-25 19:31:43.25 spid3 Server name is 'MONSTERMAILLOOP6'.
2004-02-25 19:31:43.25 spid3 Skipping startup of clean database id 5
2004-02-25 19:31:43.25 spid3 Skipping startup of clean database id 6
2004-02-25 19:31:43.25 spid3 Starting up database 'msdb'.
2004-02-25 19:31:43.56 spid5 Clearing tempdb database.
2004-02-25 19:31:44.13 spid5 Starting up database 'tempdb'.
2004-02-25 19:31:44.17 spid3 Recovery complete.
2004-02-25 19:31:44.17 spid3 SQL global counter collection task is created.
2004-02-25 19:31:44.19 spid3 Warning: override, autoexec procedures skipped.
2004-02-25 19:31:47.75 server SQL server listening on TCP, Shared Memory, Named Pipes.
2004-02-25 19:31:47.75 server SQL Server is ready for client connections
2004-02-25 19:31:57.97 spid3 SQL Server is terminating due to 'stop' request from Service Control Manager.
Any thoughts on this would be very much appreciated!
Hi,
Does anyone know if it's at all possible to install SQL Server Express 2005 over a Remote Desktop on a Windows XP machine.
I know there are problems running SQL over Remote Desktop, in that it won't start up a User Instance, but I wasn't sure if we can install over Remote Desktop.
If it's not possible, can anyone point me to an official document stating this fact?
Thanks
Sam
ProblemWhen Remote Desktop to my main office machine, and when trying toconnect to SQL Express, I was becoming increasingly frustrated with thefollowing error:Error: 'Failed to generate a user instance of SQL Server due to afailure in starting the process for the user instance. The connectionwill be closed.'What is the solution?Solutions: ( pick any of the 3)1. Obtain and apply the patch http://support.microsoft.com/?id=8966132. Wait for the next Windows Service pack3.Of course if you can not get the patch, you can always do this (Note:You must have WinVnc server running in your remote computer)1. In the remote desktop session, reboot your computer.Click Start->Windows Security->Shutdown->Restart.Wait for some time to get machine up.2. Use your vncviewer to login to your remote computer. You can chooseto do all work via VNC or go to next step.3. Use remote desktop to login (this automatically closes the winvncsession).There you go, You did not create a remote session, but reused yourlocal session.
View 1 Replies View RelatedMy objective is to use Enterprise Manager to move (copy) my SQL db from the server to my windows desktop computer.
I downloaded MSDE and am having trouble installing it, no doubt because I do not understand the documentaion (ReadMeMSDE2000A.htm).
When I try to run setup, I get that message that says:
"A strong SA password is required for security reasons. Please use SAPWD switch to supply the same."
Considering my purpose, do I need a "strong" SA password? If not, how do I get around it? If yes, how do I set it up?
I am a Mac user so I have poor windows skills, please make it as painless as possible for me, thanks!
Ron
venu writes "Hi,
Am very new to MS SQL adminstration
Can anybody help me out how to work on Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) Release A just for the practice.
The activity which am going to workout on MSDE is below.
How to install SQL(on XP)
How the layout will be(like if i insall MSDE what are all Application will be and how they depends on each other)
How to create/delete tables if so, how can we do it either by GUI or CUI
just i need a clarifications reg same
Thank you,
venu"
Hi,
I am developing a windows application that needs to communicate with a remote SQL server 2005 database. Server allows remote connections and MSDTC service also running. Do I need to run MSDTC service on the client machine where I use desktop application ? any ideas ? It's throwing some error like
An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
But my SQL Server allows remote connection, and I am able to do a select statement.
But when I insert/update anything, it's throwing this error. I guess some problem with MSDCT. Anybody have any idea ?
I'm using ssms 2014, but got the same problem with 2012. I use ssms almost entirely on remote desktop sessions ( Windows 7, Server 2008R2, Server 2012 ). It may be related to having filtered job activity monitor windows open for hours, but about once per day ssms fails, and has to restart. Upon resuming usually only one of several queries is restored.
View 8 Replies View RelatedI have installed Visual Studio 2005 Prof Edition on a Vista machine and SQL Server 2005 Developer Edition on a Windows 2000 server. They will be used as a development environment for us. As we need to management the SQL Server 2005, we would like to install the 2005 Developer SSMS on the Vista machine such that we can manage the SQL Server 2005 developer instance installed on that Win2k machine. However, the system does not allow us to do it. We have the express edition autoamtically installed while we installed the Vistual Studio. Is there any workaround that i can still install the 2005 developer SSMS without uninstall the sql server 2005 Xpress version? Or, I have to uninstall the Xpress version before i can install the 2005 developer's SSMS? Please help!
View 11 Replies View RelatedHi
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
Thanks
Priyanka
hI I M VERY MUCH NEWTO ASP.NET +SQL SERVER U CAN SAY I JUST INSTALL
BOTH WHEN I I FIRST INSTALL QUICKSTART TUTORIAL OF MS.NET2003 IT ASK ME
TO COPY MY DATABASE file to sqlserverosql -E -S (local)NetSDK -i InstPubs.sqlosql -E -S (local)NetSDK -i InstNwnd.sqlosql -E -S (local)NetSDK -i Portal.sqlosql -E -S (local)NetSDK -i Grocer.sqlwhen i tries to do that it give me the following errors
[DBMSLPCN]SQL Server does not exist or access denied.[DBMSLPCN]ConnectionOpen (Connect()).
well my sql server name is www
same as my computer name (www)services is sql servermy computer is running xp sp2and i m running .net1.1also please tell me how to Granting Access to the ASPNET usermy asp.net user name is ASP.NETif i have to reinstall sql server 2000 tell me what step i should follow to configure it correctlyi m waiting for ur QURU's answers hopefully soonhave a nice dayHUssain
I have a few questions about the SQL Server Desktop Engine (MSDE), sorry there are so many ..
1. Which software products does this come with ?
2. If I create a SQL Server Database and want to distribute it to clients, how do I actually do it with MDSE ?
3. If I need to "upgrade" my database at some point in the future (that may contain data at a client site) how would I go about getting all the data out - would I need to write an external app ?
4. What are it's pros and cons when compared to installing full SQL Server on a client site ?
5. I've heard that the preformance of an MSDE Database degrades severely after more than 5 concurrent connections, is this just due to the performance of the product or is it something to do with the licencing model ?
6. Is it possible to write applications in, say VB, to alter the database once it has been installed on client site e.g. modify/create tables, indexes, stored procedures ?
Thanks for any help in advance ..
Scott..
Has anyone had trouble accessing SQL 2000 desktop install over the LAN on SBS 2003?
I cannot access my installation from the same domain, yet when I install it on a machine running something other than SBS 2003 there are no problems.
Everything seems shared correctly, and I have tried loggin on to the remote machine as Administrator with no success.
Any suggestions would be appreciated.
We're upgrading a SQL Server 2000 cluster (Active/Passive) running on Windows 2000 Server to a SQL Server 2005 Cluster running on Windows Server 2003. We can't purchase new hardware and we have no spare hardware. We also need to move from Windows 2000 Server to Windows 2003 Server at the same time. We want to keep downtime to a bare minimum.
What we were thinking was the following steps... Anyone try this?
1. Break the link between the servers.
2. Install a fresh copy of windows 2003 server on one side along with SQL Server 2005. While this step is running, the active node would still be live on Windows 2000 Server and SQL Server 2000 serving our customers.
3. Restore a copy of a backup from the active production side to the node we're upgrading and at that point we would bring the active node down, switching the active node to be the newly upgraded server.
4. As a final step, the old active node would now have the link to it broken, we would install a fresh copy of windows 2003 server on it and sql server 2005. At this point we would bring it back into the cluster and the cluster would be complete again.
Thoughts?
Friends -
Need your help and guidence for doing upgrading SQL Server 2000 Cluster to SQL Server 2005 Cluster.
Let me explain my current environment.
1. Currently SQL Server 2000 Cluster environment is running on Windows 2000 Server we need to upgrade this to SQL Server 2005 on Windows 2003 Server. >>> Production environment.
My Plans:
1. On Testing Environment Install SQL Server 2000 cluster on Windows 2003 Server and do a restore of databases from the produciton environment.
2. Upgrade In-Place from SQL Server 2000 Cluster to SQL Server 2005 Cluster.
My doubts
1. Can i install SQL Server 2000 Cluster on Windows 2003 Server. Is it possible or not.
Please advise me and correct my steps.
Cheers
VSH
Can someone advise me if this is basically SQL server 2000 and will work effectively to simulate sql server on a stand alone development machine ? Is this what its meant for?
I'm just not clear on this, here is the link:
http://www.microsoft.com/downloads/details.aspx?FamilyID=413744d1-a0bc-479f-bafa-e4b278eb9147&DisplayLang=en
Thanks in advance for any advice.
Trying to install Microsoft SQL Server 2000 Desktop Engine on my laptop. I downloaded the software and opened it to a folder on the C drive. Then from the command prompt I entered this:
C:msderela>setup sapwd = hillary instancename=mjh targetdir=c:mike
The program starts to install and seems to get near to the end of instal and then the progress bar starts going backwards and nothing gets installed....any ideas of what I'm doing wrong....I really don't know anything about this at all.
Thanks
Did a SQL Server Desktop Engine 2000 (MSDE) having SQL Agent module?
View 2 Replies View RelatedI have SQL Server 2000 installed on my laptop and am trying to install an instance of MSDE. I keep getting the error message: "The installation of SQL Server 2000 Desktop Engine has failed. Please see the Getting Started manual for further instructions."
I have done this installation before on other machines. Something must be corrupt on my machine (?). The error message is not very enlightening. Any ideas?
I connect to a compute via Remote Desktop Connection that is running SQL Server 2003. That part works. However, once I'm connected, and running SQL Server, I cannot see my user name in SQL, when I use the query, "SELECT user_name as ()". What I see instead is "DBO". Nor does it show me as being in a particlar group. I also cannot see my Windows Authentication remote computer name.
I think it has something to do with using my PC to do the Remote Desktop Connection and then from there, running SQL Server 2003, but am lost on this one.
Can anyone help? I sure would appreciate it! Thanks in advance!
*********************************************************************
This forum is best viewed with a computer. Questions asked freely. Confusion happily shared.
How do I add login user ASPNET to my SQL 2000 Desktop Engine Server?. I can not find the "Server Manager" in the Start - Programs. Is there any other way to get around adding ASPNET login to the SQL server so I can test my VB program. I got the error: Login failed for user 'com_nameASPNET'.
View 1 Replies View RelatedHi Everyone,Apparently, I was being asked on a question, "Why don't we procure adesktop PC to run MS SQL Server 2000 rather than a buying a server?".From a Management point-of-view, buying a desktop PC is much cheaperthan a server. However, I just wanted to understand that is it aviable solution given the database size is something around 200 GB?Equipping with more memory, more storage and a more powerful CPU on adesktop PC could really taking up the role to support the DBMS?Besides this "sensitive" costing concerns, what will be othersdifference in running the SQL Server 2000 on the two differenthardware architecture? For example, IO rate, reliability, RAID-1support, performance, … etc.(Note: The operating system is Microsoft Windows 2000 EnterpriseEdition)Regards,Ambrose
View 1 Replies View RelatedHi,
I've experienced a problem (bug?) when deploying reports to the report server. My users kept complaining about losing authentication to reports when I deploy a new report. I found the problem but don't understand why this is happening. My collegue developped the earliest reports and loggs in with a different user on Remote Desktop to develop the reports. When the report is deployed, the datasources are deployed also.
Now when I log in on Remote Desktop with another user then my collegue and open the same report project, and check out the datasources, the credentials are gone ... ?!? So when I deploy a report the datasource with the empty credentials are deployed too, wich causes all the authentication problems.
My Question: How comes I can't see the user credentials my collegue filled in? When I open the report project the credentials are gone. I log out, my collegue loggs in, and the credentials are back
I suppose this has something to do with Remote Desktop and the users connecting to it?
Thanks in advance!
I need to be able to restart an application service after the SQL Cluster fails over. how to accomplish this as a SQL job?
View 1 Replies View RelatedI've never performed this type of installation. Any tips/ tricks you could provide would be greatly appreciated.
View 10 Replies View Related
I am trying to install multi instances on my server cluster 2003 R2 Sp2. Because of the compatibility issues with my services I need to install both SQL 2000 and 2005. With 2000 I can easily specify the instance and servername. The server name can be the same, but the instance has to be different. Is this true for 2005? I have found so far that for every new instance that you create that you need to have a different virtual server name. How can you utilize the same virtual name and have multi insances
servername$instance1
servername$instance2
and so on
ThatGuy
Hey,
I have a 3 node cluster running 6 instances of SQL Server, I want to install Analysis Services along side of one of the SQL 2005 instances. Thus one of the cluster instances would host SQL Server DB, Analysis Services and SQL Agent. Is this possible or does Analysis Services need it's own Cluster Instance.
Thanks!
I would like to install SQL server 2005 cluster on Windows 2003 cluster. Is domain controller (AD and DNS) necessary for the SQL server 2005 cluster? If yes, may I install it on one of the SQL server 2005 cluster nodes? Thanks in advance
View 2 Replies View Related
Hello All, I am trying the following script to upgrade SQL Server 2005 SP1 to SP2. I have an Active Passive cluster configuration. I have default instances of SQL Server. I am using the following script.
start /wait c:1sqlserversp2SQLSERVER2005SP2-KB921896-x86-ENU.exe /allinstances /quiet.
The sql server install fails to run. When I used the above command with just
start /wait c:1sqlserversp2SQLSERVER2005SP2-KB921896-x86-ENU.exe /quiet still the summary.txt file came with authentication success and that is all. I changed the above script and did
start /wait c:1sqlserversp2SQLSERVER2005SP2-KB921896-x86-ENU.exe /instancename=instancename of the cluster
This worked, however the install patched the passive node (DB engine, all the cluster unaware components) but failed to patch the DB engine on the Active node. I had to run the SQL Server sp2 install manually but still it did not patch the DB engine on the primary node
1. Can someone please help me with this issue as I want the unattended install to work. so it installs both active and passive node. I will post the final output and also the ADS script to do this as a bonus if this works.
Here is the summary.txt file.
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
msftesql Database Services Service 5152
MSSQLSERVER Database Services Service 4412
ResrcMon.exe Database Services Application SHOMSCSService 4688
**********************************************************************************
Product Installation Status
Product : Setup Support Files
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2153
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29506
Error Description : MSP Error: 29506 SQL Server Setup failed to modify security permissions on file D:Microsoft SQL ServerMSSQL.1MSSQLData for user sqlservice. To proceed, verify that the account and domain running SQL Server Setup exist, that the account running SQL Server Setup has administrator privileges, and that exists on the destination drive.
----------------------------------------------------------------------------------
Product : Integration Services
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Native Client
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Client Components
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : MSXML 6.0 Parser
Product Version (Previous): 1129
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : SQLXML4
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Backward Compatibility
Product Version (Previous): 2004
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Microsoft SQL Server VSS Writer
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
One or more products failed to install, see above for details
Exit Code Returned: 29506
Hi,
When I tried to SQL Server 2005 (Standard) to two-node Windows 2003 servers, the Remote Setup task on the 2nd node hang. Here is the SQL Setup log. Please help figure out the cause of the problem. Thanks in advance.
Microsoft SQL Server 2005 Setup beginning at Tue Apr 24 16:17:14 2007
Process ID : 2864
\irv144C$SQL2005Std-x64disc1setup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/3/24 16:17:14
Complete: LoadResourcesAction at: 2007/3/24 16:17:14, returned true
Running: ParseBootstrapOptionsAction at: 2007/3/24 16:17:14
Loaded DLL:\irv144C$SQL2005Std-x64disc1xmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/3/24 16:17:14, returned false
Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run:
Could not parse command line due to datastore exception.
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Fri Jul 29 01:13:55 2005
Function Name: writeEncryptedString
Source Line Number: 124
----------------------------------------------------------
writeEncryptedString() failed
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Fri Jul 29 01:13:55 2005
Function Name: writeEncryptedString
Source Line Number: 123
----------------------------------------------------------
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: cryptohelpercryptsameusersamemachine.cpp
Compiler Timestamp: Mon Jun 13 14:30:00 2005
Function Name: sqls::CryptSameUserSameMachine:rotectData
Source Line Number: 50
2
Could not skip Component update due to datastore exception.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "InstallMediaPath" {"SetupBootstrapOptionsScope", "", "2864"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Running: ValidateWinNTAction at: 2007/3/24 16:17:14
Complete: ValidateWinNTAction at: 2007/3/24 16:17:14, returned true
Running: ValidateMinOSAction at: 2007/3/24 16:17:14
Complete: ValidateMinOSAction at: 2007/3/24 16:17:14, returned true
Running: PerformSCCAction at: 2007/3/24 16:17:14
Complete: PerformSCCAction at: 2007/3/24 16:17:14, returned true
Running: ActivateLoggingAction at: 2007/3/24 16:17:14
Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run:
Datastore exception while trying to write logging properties.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupStateScope.primaryLogFiles
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
0000000000EDAF90Unable to proceed with setup, there was a command line parsing error. : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
Class not registered.