I tried installing Reporting Services yesterday and the install went fine. However I was getting stuck on either the Web Service Identity or Database Setup portion of the configuration. I did some reading online and unfortuanaetly installed SQL 2005 SP2. I have tried uninstalling Reporting Services and reinstalling, but always seems to hold on to some old config info. After an install when I start configuration manager, Server Status, Report Server Virtual Directory, and Windows Service Identity are already green checks, while Report Manager Virtual Directory, Web Service Identity and Database Setup are red x's. I try to do a new virtual directory, in the task list it says it created it, in IIS it did create it, but it still shows an x next to it. If I go down to web service identity and click apply I get, ReportServicesConfigUI.WMIProvider.WMIProviderException: A virtual directory must first be created before performing this operation. The below is also in the error log from around the time of install.
ReportingServicesService!library!8!2/12/2008-12:49:20:: i INFO: Catalog SQL Server Edition = StandardReportingServicesService!library!8!2/12/2008-12:49:20:: e ERROR: Sql errorystem.Data.SqlClient.SqlException: Could not find stored procedure 'GetDBVersion'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion()ReportingServicesService!library!8!2/12/2008-12:49:20:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights., ; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights.ReportingServicesService!library!8!2/12/2008-12:49:20:: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion() at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage() at Microsoft.ReportingServices.Library.ServiceController.ServiceStartThread()ReportingServicesService!library!8!2/12/2008-12:49:20:: Attempting to start service again...
I feel like I'm stuck in some kind of spot because of SP2. Does anyone know of a way to uninstall Reporting Services and all the config info with it, so when I reinstall it I can start from the top again configuring? Thanks.
I would be very grateful if someone could take a look at my command line install and offer advice on if I am doing it correctly.
The reason I am asking is because I cannot seem to get the server installed without having errors during the installation: "The SQL Server (MSSQLSERVER) service terminated with service-specific error 17113 (0x42D9)"
Looking at the server error log indicates that master.mdf was not in the data directory (I have however specified a different data directory for ease of backup by our software and this is created during the install but does not have this database in the data directory - it is however in the template data directory!
I also get this error when the SQL Server service is started: "The SQL Server (SQLEXPRESS) service terminated with service-specific error 3417 (0xD59)."
All advice is welcome. Please see below my batch file. Also, if you think I should do this in a different way then please let me know. I basically want to install SQL server on a customer computer and automate the install so the custoemr does not need to enter any information.
The goal of this install is: [1] Deply a custom .Net application and SQL server at the same time on the same computer without user input. [2] Allow remote .Net applications (designed by myself also) to connect over a LAN (and later maybe over a WAN) to the database to the above database.
The command line is this (I have also included the batch file I am usign below). For ease of reading I have put the parameters on a new line below:
SET MODE=/qb SET SETUP_EXE=sqlfilessetup.exe %MODE% SET SQLDATADIR=c:SqlData
SET SET_USERNAME=username="CustomerUsername" SET SET_COMPANYNAME=companyname="OurCompany" SET SET_ADDLOCAL=addlocal="SQL_Engine,SQL_Data_Files,SQL_Replication,Connectivity,SDK" SET SET_DISABLENETWORKPROTOCOLS=disablenetworkprotocols="0" SET SET_INSTANCENAME=instancename="MSSQLSERVER"
SET SET_INSTALLSQLDATADIR=INSTALLSQLDATADIR="%SQLDATADIR%"
SET SET_SAVESYSDB=SAVESYSDB="1" SET SET_USESYSDB=USESYSDB="%SQLDATADIR%"
SET SET_SQLAUTOSTART=SQLAUTOSTART="1" SET SET_SECURITYMODE=SECURITYMODE="SQL"
@REM === RE-INSTALL PARAMS - NOT CURRENTLY BEING USED?? SHOULD I ADD THESE ALSO? === SET SET_REINSTALLMODE=REINSTALLMODE="omus" SET SET_REINSTALL=REINSTALL="SQL_Engine,SQL_Data_Files,SQL_Replication,Connectivity,SDK" SET SET_REBUILDDATABASE=REBUILDDATABASE="1"
I am installing Visual Studio 2005 Professional Edition. Everything goes well until the installation of SQL Server Express occurs. SQL Express installation progresses fine until very end of the installation. At that point it becomes stuck.
The installation says "Current component is installing" and is stuck on that message. The installer does not seem to be frozen as the picutres changes. However CPU usage for the setup processes is 0.
I have disabled all virus scanning software already.
I'm facing a problem while installing the SQL Server 2005 Express on Windows 2000 Pro with SP4.
After finishing the downloading from Microsoft I start the installation and things seems to go ok but during Extracting Files step a message appears "SQL Server Setup unexpectedly failed. For more information, review the setup summary log file in %Program Files%Microsoft SQL Server90Setup BootstrapLOGSummary.txt" and it terminates the installation.
I located the log file and open it but can't understand the problem..I copy the text and paste it here for anyone who can understand it.Please, it is very importand for me to work with SQL Server for my project. Any advice or information or anything else???
Thank you all,
HERE IS THE LOG FILE:
"Microsoft SQL Server 2005 Setup beginning at Wed Mar 14 07:45:33 2007 Process ID : 2684 c:c7720b32114815db82783dd06c2d54b9setup.exe Version: 2005.90.3042.0 Running: LoadResourcesAction at: 2007/2/14 7:45:33 Complete: LoadResourcesAction at: 2007/2/14 7:45:33, returned true Running: ParseBootstrapOptionsAction at: 2007/2/14 7:45:33 Loaded DLL:c:c7720b32114815db82783dd06c2d54b9xmlrw.dll Version:2.0.3609.0 Complete: ParseBootstrapOptionsAction at: 2007/2/14 7:45:33, returned false Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run: Could not parse command line due to datastore exception. Source File Name: utillibpersisthelpers.cpp Compiler Timestamp: Wed Jun 14 16:30:14 2006 Function Name: writeEncryptedString Source Line Number: 124 ---------------------------------------------------------- writeEncryptedString() failed Source File Name: utillibpersisthelpers.cpp Compiler Timestamp: Wed Jun 14 16:30:14 2006 Function Name: writeEncryptedString Source Line Number: 123 ---------------------------------------------------------- Error Code: 0x80070002 (2) Windows Error Text: Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run: Datastore exception while trying to write logging properties. Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Wed Jun 14 16:27:59 2006 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache Source File Name: datastorepropertycollection.cpp Compiler Timestamp: Wed Jun 14 16:28:01 2006 Function Name: SetupStateScope.primaryLogFiles Source Line Number: 44 ---------------------------------------------------------- No collector registered for scope: "SetupStateScope" 02B1CFC0Unable to proceed with setup, there was a command line parsing error. : 2 Error Code: 0x80070002 (2) Windows Error Text: Class not registered. Failed to create CAB file due to datastore exception Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Wed Jun 14 16:27:59 2006 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "HostSetup" {"SetupBootstrapOptionsScope", "", "2684"} in cache Source File Name: datastorepropertycollection.cpp Compiler Timestamp: Wed Jun 14 16:28:01 2006 Function Name: SetupBootstrapOptionsScope.HostSetup Source Line Number: 44 ---------------------------------------------------------- No collector registered for scope: "SetupBootstrapOptionsScope" Message pump returning: 2"
I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit): Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'> Function=Do_sqlPerfmon2 <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='0'> Doing Action: Do_sqlPerfmon2 PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 <Func Name='Do_sqlPerfmon2'> <EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'> PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,) <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI) MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,) MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close) MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2 <Func Name='LaunchFunction'> Function=Do_sqlPerfmon2 <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='0'> Doing Action: Do_sqlPerfmon2 PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 <Func Name='Do_sqlPerfmon2'> <EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'> PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 Gathering darwin properties for failure handling. Error Code: 2 MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
Is it possible to install and configure the MSDTC resource in a SQL Server 2000 cluster after SQL is installed and running?
When I recently went through a rebuild of my cluster, I forgot to install the resource before installing SQL Server. Now, if I install and bring online the MSDTC resource the SQL disk groups will not fail over correctly. The SQL Server resource will not come online.
Thanks in advance for any help. I would really like to avoid rebuilding again.
I am currently running Windows XP Professional Service Pack2. It already has MSDE & SQL Server 2000 installed (although I just uninstalled MSDE in the vain hope that it might present the installer with a more straightforward upgrade).
I have tried installing with the default instance & a new instance (I don't really care - I just need to install the darn thing). I just want the basic database & Books On-line, nothing fancy.
Here is the Summary log, for what it's worth:
Microsoft SQL Server 2005 9.00.1399.06 ============================== OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600) Time : Tue Feb 06 16:45:14 2007
Machine : ANTHONYY1 Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLSupport_1.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft SQL Server Native Client Product Version : 9.00.2047.00 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLNCLI_1.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft Office 2003 Web Components Product Version : 11.0.6558.0 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_OWC11_1.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft SQL Server VSS Writer Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SqlWriter_1.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft SQL Server 2005 Backward compatibility Product Version : 8.05.1054 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BackwardsCompat_1.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : MSXML 6.0 Parser (KB927977) Product Version : 6.00.3890.0 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_MSXML6_1.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLSupport_2.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft SQL Server Native Client Product Version : 9.00.2047.00 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLNCLI_2.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft Office 2003 Web Components Product Version : 11.0.6558.0 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_OWC11_2.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft SQL Server 2005 Books Online (English) Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BOL_1.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : Microsoft SQL Server 2005 Backward compatibility Product Version : 8.05.1054 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BackwardsCompat_2.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : MSXML 6.0 Parser (KB927977) Product Version : 6.00.3890.0 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_MSXML6_2.log -------------------------------------------------------------------------------- Machine : ANTHONYY1 Product : SQLXML4 Error : Setup is preparing to continue with the installation. --------------------------------------------------------------------------------
Here is the SQLSetup0011_ANTHONYY1_Core(Local).log
Microsoft SQL Server 2005 Setup beginning at Tue Feb 06 16:45:14 2007 Process ID : 2560 C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0 Running: LoadResourcesAction at: 2007/1/6 16:45:14 Complete: LoadResourcesAction at: 2007/1/6 16:45:14, returned true Running: ParseBootstrapOptionsAction at: 2007/1/6 16:45:14 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0 Complete: ParseBootstrapOptionsAction at: 2007/1/6 16:45:14, returned true Running: ValidateWinNTAction at: 2007/1/6 16:45:14 Complete: ValidateWinNTAction at: 2007/1/6 16:45:14, returned true Running: ValidateMinOSAction at: 2007/1/6 16:45:14 Complete: ValidateMinOSAction at: 2007/1/6 16:45:14, returned true Running: PerformSCCAction at: 2007/1/6 16:45:14 Complete: PerformSCCAction at: 2007/1/6 16:45:14, returned true Running: ActivateLoggingAction at: 2007/1/6 16:45:14 Complete: ActivateLoggingAction at: 2007/1/6 16:45:14, returned true Running: DetectPatchedBootstrapAction at: 2007/1/6 16:45:14 Complete: DetectPatchedBootstrapAction at: 2007/1/6 16:45:14, returned true Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions: Condition "EventCondition: __STP_LaunchPatchedBootstrap__2560" returned false. Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions: Condition "Setup is running locally." returned true. Running: PerformDotNetCheck2 at: 2007/1/6 16:45:14 Complete: PerformDotNetCheck2 at: 2007/1/6 16:45:14, returned true Running: InvokeSqlSetupDllAction at: 2007/1/6 16:45:14 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0 <Func Name='DwLaunchMsiExec'> Examining 'sqlspars' globals to initialize 'SetupStateScope' Opening 'MachineConfigScope' for [ANTHONYY1] Trying to find Product Code from command line or passed transform If possible, determine install id and type Trying to find Instance Name from command line. No Instance Name provided on the command line If possible, determine action Machine = ANTHONYY1, Article = WMIServiceWin32OSWorking, Result = 0 (0x0) Machine = ANTHONYY1, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0) Machine = ANTHONYY1, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0) Machine = ANTHONYY1, Article = WMIServiceReadRegWorking, Result = 0 (0x0) Machine = ANTHONYY1, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0) Machine = ANTHONYY1, Article = WMIServiceCIMDataWorking, Result = 0 (0x0) Machine = ANTHONYY1, Article = XMLDomDocument, Result = 0 (0x0) Machine = ANTHONYY1, Article = Processor, Result = 0 (0x0) Machine = ANTHONYY1, Article = PhysicalMemory, Result = 0 (0x0) Machine = ANTHONYY1, Article = DiskFreeSpace, Result = 0 (0x0) Machine = ANTHONYY1, Article = OSVersion, Result = 0 (0x0) Machine = ANTHONYY1, Article = OSServicePack, Result = 0 (0x0) Machine = ANTHONYY1, Article = OSType, Result = 0 (0x0) Machine = ANTHONYY1, Article = iisDep, Result = 0 (0x0) Machine = ANTHONYY1, Article = AdminShare, Result = 0 (0x0) Machine = ANTHONYY1, Article = PendingReboot, Result = 70011 (0x1117b) Machine = ANTHONYY1, Article = PerfMon, Result = 0 (0x0) Machine = ANTHONYY1, Article = IEVersion, Result = 0 (0x0) Machine = ANTHONYY1, Article = DriveWriteAccess, Result = 0 (0x0) Machine = ANTHONYY1, Article = COMPlus, Result = 0 (0x0) Machine = ANTHONYY1, Article = ASPNETVersionRegistration, Result = 0 (0x0) Machine = ANTHONYY1, Article = MDAC25Version, Result = 0 (0x0) ******************************************* Setup Consistency Check Report for Machine: ANTHONYY1 ******************************************* Article: WMI Service Requirement, Result: CheckPassed Article: MSXML Requirement, Result: CheckPassed Article: Operating System Minimum Level Requirement, Result: CheckPassed Article: Operating System Service Pack Level Requirement, Result: CheckPassed Article: SQL Compatibility With Operating System, Result: CheckPassed Article: Minimum Hardware Requirement, Result: CheckPassed Article: IIS Feature Requirement, Result: CheckPassed Article: Pending Reboot Requirement, Result: CheckPassed Article: Performance Monitor Counter Requirement, Result: CheckPassed Article: Default Installation Path Permission Requirement, Result: CheckPassed Article: Internet Explorer Requirement, Result: CheckPassed Article: Check COM+ Catalogue, Result: CheckPassed Article: ASP.Net Registration Requirement, Result: CheckPassed Article: Minimum MDAC Version Requirement, Result: CheckPassed <Func Name='PerformDetections'> 0 <EndFunc Name='PerformDetections' Return='0' GetLastError='0'> <Func Name='DisplaySCCWizard'> CSetupBootstrapWizard returned 1 <EndFunc Name='DisplaySCCWizard' Return='0' GetLastError='183'> Failed to find help file for LCID :2057 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0 <EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'> Complete: InvokeSqlSetupDllAction at: 2007/1/6 16:49:35, returned true Running: SetPackageInstallStateAction at: 2007/1/6 16:49:35 Complete: SetPackageInstallStateAction at: 2007/1/6 16:49:36, returned true Running: DeterminePackageTransformsAction at: 2007/1/6 16:49:36 Complete: DeterminePackageTransformsAction at: 2007/1/6 16:49:47, returned true Running: ValidateSetupPropertiesAction at: 2007/1/6 16:49:47 Complete: ValidateSetupPropertiesAction at: 2007/1/6 16:49:47, returned true Running: OpenPipeAction at: 2007/1/6 16:49:47 Complete: OpenPipeAction at: 2007/1/6 16:49:47, returned false Error: Action "OpenPipeAction" failed during execution. Running: CreatePipeAction at: 2007/1/6 16:49:47 Complete: CreatePipeAction at: 2007/1/6 16:49:47, returned false Error: Action "CreatePipeAction" failed during execution. Action "RunRemoteSetupAction" will be skipped due to the following restrictions: Condition "Action: CreatePipeAction has finished and passed." returned false. Running: PopulateMutatorDbAction at: 2007/1/6 16:49:47 Complete: PopulateMutatorDbAction at: 2007/1/6 16:49:47, returned true Running: GenerateRequestsAction at: 2007/1/6 16:49:47 SQL_Engine = 3 SQL_Data_Files = 3 SQL_Replication = 3 SQL_FullText = 3 SQL_SharedTools = 3 SQL_BC_DEP = 3 Analysis_Server = -1 AnalysisDataFiles = -1 AnalysisSharedTools = -1 RS_Server = -1 RS_Web_Interface = -1 RS_SharedTools = -1 Notification_Services = -1 NS_Engine = -1 NS_Client = -1 SQL_DTS = -1 Client_Components = 3 Connectivity = 3 SQL_Tools90 = 3 SQL_WarehouseDevWorkbench = 3 SDK = 3 SQLXML = 3 Tools_Legacy = 3 TOOLS_BC_DEP = 3 SQL_Documentation = 3 SQL_BooksOnline = 3 SQL_DatabaseSamples = -1 SQL_AdventureWorksSamples = -1 SQL_AdventureWorksDWSamples = -1 SQL_AdventureWorksASSamples = -1 SQL_Samples = -1 Complete: GenerateRequestsAction at: 2007/1/6 16:49:48, returned true Running: CreateProgressWindowAction at: 2007/1/6 16:49:48 Complete: CreateProgressWindowAction at: 2007/1/6 16:49:48, returned true Running: ScheduleActionAction at: 2007/1/6 16:49:48 Complete: ScheduleActionAction at: 2007/1/6 16:49:48, returned true Skipped: InstallASAction.11 Skipped: Action "InstallASAction.11" was not run. Information reported during analysis: No install request found for package: "sqlsupport", referred by package: "as", install will be skipped as a result. Skipped: InstallASAction.18 Skipped: Action "InstallASAction.18" was not run. Information reported during analysis: No install request found for package: "owc11", referred by package: "as", install will be skipped as a result. Skipped: InstallASAction.22 Skipped: Action "InstallASAction.22" was not run. Information reported during analysis: No install request found for package: "bcRedist", referred by package: "as", install will be skipped as a result. Skipped: InstallASAction.9 Skipped: Action "InstallASAction.9" was not run. Information reported during analysis: No install request found for package: "msxml6", referred by package: "as", install will be skipped as a result. Skipped: InstallDTSAction Skipped: Action "InstallDTSAction" was not run. Information reported during analysis: No install request found for package: "dts", install will be skipped as a result. Skipped: InstallDTSAction.11 Skipped: Action "InstallDTSAction.11" was not run. Information reported during analysis: No install request found for package: "sqlsupport", referred by package: "dts", install will be skipped as a result. Skipped: InstallDTSAction.12 Skipped: Action "InstallDTSAction.12" was not run. Information reported during analysis: No install request found for package: "sqlncli", referred by package: "dts", install will be skipped as a result. Skipped: InstallDTSAction.18 Skipped: Action "InstallDTSAction.18" was not run. Information reported during analysis: No install request found for package: "owc11", referred by package: "dts", install will be skipped as a result. Skipped: InstallDTSAction.22 Skipped: Action "InstallDTSAction.22" was not run. Information reported during analysis: No install request found for package: "bcRedist", referred by package: "dts", install will be skipped as a result. Skipped: InstallDTSAction.9 Skipped: Action "InstallDTSAction.9" was not run. Information reported during analysis: No install request found for package: "msxml6", referred by package: "dts", install will be skipped as a result. Skipped: InstallNSAction Skipped: Action "InstallNSAction" was not run. Information reported during analysis: No install request found for package: "ns", install will be skipped as a result. Skipped: InstallNSAction.11 Skipped: Action "InstallNSAction.11" was not run. Information reported during analysis: No install request found for package: "sqlsupport", referred by package: "ns", install will be skipped as a result. Skipped: InstallNSAction.12 Skipped: Action "InstallNSAction.12" was not run. Information reported during analysis: No install request found for package: "sqlncli", referred by package: "ns", install will be skipped as a result. Skipped: InstallNSAction.18 Skipped: Action "InstallNSAction.18" was not run. Information reported during analysis: No install request found for package: "owc11", referred by package: "ns", install will be skipped as a result. Skipped: InstallNSAction.22 Skipped: Action "InstallNSAction.22" was not run. Information reported during analysis: No install request found for package: "bcRedist", referred by package: "ns", install will be skipped as a result. Skipped: InstallNSAction.9 Skipped: Action "InstallNSAction.9" was not run. Information reported during analysis: No install request found for package: "msxml6", referred by package: "ns", install will be skipped as a result. Skipped: InstallRSAction.11 Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis: No install request found for package: "sqlsupport", referred by package: "rs", install will be skipped as a result. Skipped: InstallRSAction.18 Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis: No install request found for package: "owc11", referred by package: "rs", install will be skipped as a result. Skipped: InstallRSAction.22 Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis: No install request found for package: "bcRedist", referred by package: "rs", install will be skipped as a result. Running: InstallSqlAction.11 at: 2007/1/6 16:49:48 Installing: sqlsupport on target: ANTHONYY1 Complete: InstallSqlAction.11 at: 2007/1/6 16:49:51, returned true Running: InstallSqlAction.12 at: 2007/1/6 16:49:51 Installing: sqlncli on target: ANTHONYY1 Complete: InstallSqlAction.12 at: 2007/1/6 16:49:55, returned true Running: InstallSqlAction.18 at: 2007/1/6 16:49:55 Installing: owc11 on target: ANTHONYY1 Complete: InstallSqlAction.18 at: 2007/1/6 16:49:56, returned true Running: InstallSqlAction.21 at: 2007/1/6 16:49:56 Installing: sqlwriter on target: ANTHONYY1 Complete: InstallSqlAction.21 at: 2007/1/6 16:49:58, returned true Running: InstallSqlAction.22 at: 2007/1/6 16:49:58 Installing: bcRedist on target: ANTHONYY1 Complete: InstallSqlAction.22 at: 2007/1/6 16:50:0, returned true Running: InstallSqlAction.9 at: 2007/1/6 16:50:0 Installing: msxml6 on target: ANTHONYY1 Complete: InstallSqlAction.9 at: 2007/1/6 16:50:2, returned true Running: InstallToolsAction.11 at: 2007/1/6 16:50:2 Installing: sqlsupport on target: ANTHONYY1 Complete: InstallToolsAction.11 at: 2007/1/6 16:50:5, returned true Running: InstallToolsAction.12 at: 2007/1/6 16:50:5 Installing: sqlncli on target: ANTHONYY1 Complete: InstallToolsAction.12 at: 2007/1/6 16:50:8, returned true Skipped: InstallToolsAction.13 Skipped: Action "InstallToolsAction.13" was not run. Information reported during analysis: No install request found for package: "PPESku", referred by package: "tools", install will be skipped as a result. Running: InstallToolsAction.18 at: 2007/1/6 16:50:8 Installing: owc11 on target: ANTHONYY1 Complete: InstallToolsAction.18 at: 2007/1/6 16:50:10, returned true Running: InstallToolsAction.20 at: 2007/1/6 16:50:10 Installing: BOL on target: ANTHONYY1 Complete: InstallToolsAction.20 at: 2007/1/6 16:52:2, returned true Running: InstallToolsAction.22 at: 2007/1/6 16:52:2 Installing: bcRedist on target: ANTHONYY1 Complete: InstallToolsAction.22 at: 2007/1/6 16:52:4, returned true Running: InstallToolsAction.9 at: 2007/1/6 16:52:4 Installing: msxml6 on target: ANTHONYY1 Complete: InstallToolsAction.9 at: 2007/1/6 16:52:6, returned true Skipped: InstallNSAction.10 Skipped: Action "InstallNSAction.10" was not run. Information reported during analysis: No install request found for package: "sqlxml4", referred by package: "ns", install will be skipped as a result. Running: InstallSqlAction at: 2007/1/6 16:52:7 Installing: sql on target: ANTHONYY1 Error: MsiOpenDatabase failed with 110 Failed to install package This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package. Error: MsiOpenDatabase failed with 110 for MSI D:ServersSetupSqlRun_SQL.msi Setting package return code to: 1620 Complete: InstallSqlAction at: 2007/1/6 16:52:27, returned false Error: Action "InstallSqlAction" failed during execution. Error information reported during run: Target collection includes the local machine. Invoking installPackage() on local machine. Running: InstallToolsAction.10 at: 2007/1/6 16:52:27 Installing: sqlxml4 on target: ANTHONYY1 Error Code: 0x8007006e (110) Windows Error Text: The system cannot open the device or file specified.
Source File Name: sqlchainingminorbuildactionbehavior.cpp Compiler Timestamp: Mon Jun 13 14:30:04 2005 Function Name: sqls::MinorBuildActionBehavior::modifyRequest Source Line Number: 65
Complete: InstallToolsAction.10 at: 2007/1/6 16:55:59, returned false Error: Action "InstallToolsAction.10" failed during execution. Error information reported during run: Target collection includes the local machine. Invoking installPackage() on local machine. Action "InstallToolsAction" will return false due to the following preconditions: Condition "Action: InstallToolsAction.10 has finished and failed." returned true. Installation of package: "tools" failed due to a precondition. Step "InstallToolsAction" was not able to run. Skipped: InstallASAction Skipped: Action "InstallASAction" was not run. Information reported during analysis: No install request found for package: "as", install will be skipped as a result. Skipped: InstallRSAction Skipped: Action "InstallRSAction" was not run. Information reported during analysis: No install request found for package: "rs", install will be skipped as a result. Skipped: RepairForBackwardsCompatRedistAction Skipped: Action "RepairForBackwardsCompatRedistAction" was not run. Information reported during analysis: Action: "RepairForBackwardsCompatRedistAction" will be skipped due to the following condition: Condition "sql was successfully upgraded." returned false. Condition context: sql failed to upgrade and so the uninstall of the upgraded product will not occur. Error: Action "UninstallForMSDE2000Action" failed during execution. Error information reported during run: Action: "UninstallForMSDE2000Action" will be marked as failed due to the following condition: Condition "sql was successfully upgraded." returned false. Condition context: sql failed to upgrade and so the uninstall of the upgraded product will not occur. Installation of package: "patchMSDE2000" failed due to a precondition. Error: Action "UninstallForSQLAction" failed during execution. Error information reported during run: Action: "UninstallForSQLAction" will be marked as failed due to the following condition: Condition "sql was successfully upgraded." returned false. Condition context: sql failed to upgrade and so the uninstall of the upgraded product will not occur. Installation of package: "patchLibertySql" failed due to a precondition. Skipped: UninstallForRS2000Action Skipped: Action "UninstallForRS2000Action" was not run. Information reported during analysis: Action: "UninstallForRS2000Action" will be skipped due to the following condition: Condition "Action: InstallRSAction was skipped." returned true. Running: ReportChainingResults at: 2007/1/6 16:55:59 Error: Action "ReportChainingResults" threw an exception during execution. One or more packages failed to install. Refer to logs for error details. : 1620 Error Code: 0x80070654 (1620) Windows Error Text: This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
Source File Name: sqlchainingsqlchainingactions.cpp Compiler Timestamp: Thu Sep 1 22:23:05 2005 Function Name: sqls::ReportChainingResults::perform Source Line Number: 3097
---- Context ----------------------------------------------- sqls::HostSetupPackageInstallerSynch::postCommit sqls::HighlyAvailablePackage::preInstall led due to cancel code received from cancel source: 29539
...and here is the SQLSetup0011_ANTHONYY1_SQL.log:
=== Verbose logging started: 06/02/2007 16:52:14 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe === MSI (c) (00:54) [16:52:14:284]: Resetting cached policy values MSI (c) (00:54) [16:52:14:284]: Machine policy value 'Debug' is 0 MSI (c) (00:54) [16:52:14:284]: ******* RunEngine: ******* Product: D:ServersSetupSqlRun_SQL.msi ******* Action: ******* CommandLine: ********** MSI (c) (00:54) [16:52:14:284]: Client-side and UI is none or basic: Running entire install on the server. MSI (c) (00:54) [16:52:14:284]: Grabbed execution mutex. MSI (c) (00:54) [16:52:14:299]: Cloaking enabled. MSI (c) (00:54) [16:52:14:299]: Attempting to enable all disabled priveleges before calling Install on Server MSI (c) (00:54) [16:52:14:299]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (A4:98) [16:52:14:299]: Grabbed execution mutex. MSI (s) (A4:00) [16:52:14:299]: Resetting cached policy values MSI (s) (A4:00) [16:52:14:299]: Machine policy value 'Debug' is 0 MSI (s) (A4:00) [16:52:14:299]: ******* RunEngine: ******* Product: D:ServersSetupSqlRun_SQL.msi ******* Action: ******* CommandLine: ********** MSI (s) (A4:00) [16:52:21:080]: Note: 1: 2203 2: D:ServersSetupSqlRun_SQL.msi 3: -2147024873 MSI (s) (A4:00) [16:52:21:080]: MainEngineThread is returning 1620 MSI (c) (00:54) [16:52:21:080]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (00:54) [16:52:21:080]: MainEngineThread is returning 1620 === Verbose logging stopped: 06/02/2007 16:52:21 ===
I suppose an error dialog (or log message) that actually told you what is wrong and then what to do is too much to ask for. (Or an installer than just copied all the files into place). :(
Log Location: C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log MSP Error: 29537 SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]Cannot find the object 'dm_exec_query_resource_semaphores', because it does not exist or you do not have permission.. To continue, correct the problem, and then run SQL Server Setup again.
I tried to search internet, however, I couldn't get solution.
My SQL server 2005 is standard version, OS Windows server 2003 sp2, I am using Administrator account to install it.
I have compile my application into a Smart Device CAB and also including SQLCE CAB file for SQL.
I have users who choose to install SQLCE into Storage Cards instead and causes the application not to function, when asked which destination to install.
I've done some search and found out about "wceload.exe /noaskdest" but I'm using NSIS to compile into a single .exe file, and its calling "CEAppMgr.exe"
How can I force SQLCE to install into its default directory without asking user?
Hi all, Im new here so il start with a little introduction of myself, My name is Arjan im 19 years old from Holland, and i work for a company to compleet my ICT Education.
My situation:
My boss gave me a server with server 2003 standard and Sql server 2005 and visual studio 2005 installed already, he asked me if i could figure out how the 'new' reporting services work, Im pretty new to SQL and the reporting service but i figured out i had to install asp.net / frameworks and IIS.
So right now i wanna start the Reporting Services Configuration Manager and i get an error that says 'Invalid namespace' and when im trying to approach by using my browser i get 'page not found' so obviously their is Alot wrong. I asked my boss if i could not reinstall everything and do it in the correct order (IIS / ASP.net / Frameworks before installing SQL server 2k5 but that was not an option because we dont seem to have the cd's anymore.
The server is not connected to any network or the internet.
My Question:
Is their any way to fix this? and if yes could anyone tell me where to start
Thanks in Advance!
ps if their is information or logs that u need in order to help me just say so :-)
Win XP Pro SP2IIS 5.1SQL 2005 SP1 (Developer edition)VS 2005 SP1.Net 2.0IE7 (didn't work on IE 6 either)Latest updates from Windows updateI have set up SSRS successfully on several machines. But on a new machine with standard install I have the out of the box SSRS report manager running with issues and would like to resolve them. Report Manager will serve image files from my project. But it won't render deployed reports, not even one which has no data sources. From within VS 2005 the same reports render, no problems. The same reports published to another SSRS machine render fine.The browser erorr message is "Value does no fall within the expected range".Any ideas? Thanks in advance.
Hi,Is it possible to install Enterprise Manager without to install theserver ?Thanks !--J-L M. (Alphomega)ICQ: 149635116Pour m'écrire, cliquer le lien ci-dessoushttp://cerbermail.com/?G5iYdBb2Ce
I've tried looking for a solution in other threads but I couldn't find anything that was completely the same as my situation. I got a new pc at work and I've tried installing SQL Server 2005 on it but everytime I try to install it, regardless of services included or excluded with the install, I cannot get through the install without this error. Below is the excerpt from the Summary.txt log file.
Error Code: -2147024894 MSI (s) (74!98) [17:10:55:858]: Product: Microsoft SQL Server 2005 Tools -- Error 29549. Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894 Error message: The system cannot find the file specified. Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
Error 29549. Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894 Error message: The system cannot find the file specified. Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified. <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='203'> Doing Action: Do_sqlAssemblyRegSvcs PerfTime Start: Do_sqlAssemblyRegSvcs : Mon Nov 12 17:10:55 2007 <Func Name='Do_sqlAssemblyRegSvcs'> Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: 2147942402 Error message: The system cannot find the file specified. Error descrition: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified. Error Code: -2147024894 Windows Error Text: The system cannot find the file specified. Source File Name: sqlcasqlassembly.cpp Compiler Timestamp: Thu Aug 11 01:12:01 2005 Function Name: Do_sqlAssemblyRegSvcs Source Line Number: 155
I've searched for and found similar problems that deal with the microsoft.sqlserver.notificationservices.dll not being found but I haven't found a fix that worked for me. These are the fixes I've refered to thus far.
The answer that seems to fix this problem for everyone is to set the MSDTC service login as the NT AUTHORITYNetworkService account. The problem for me is that this is already set to this profile and I've tried resetting the services and rebooting the machine. I did not have a problem with my old machine, which as far as I can tell, is the same configuration, so I know this install should work.
I'm running Windows XP SP2. This is not the upgrade to SQL Server 2005 SP2, this is the original disk that came with Visual Studio 2005.
Has anyone else faced this issue where changing the MSDTC login wasn't the solution? Also, this is my first post, so I apologize if I've left anything out. Just let me know if you want any other information.
I never installed previous beta versions on my computer before. But now I have some serious problem after an incomplete de-install and a re-install of SQL server 2005 express advanced. I hope anybody can help me to solve this. Because the first installation eas not succesfull I had to do an de-install. I have tried to unstall through start/control panel/ add-remove programms and even there not all programs were removed. And that caused the problem. After that I wanted to re-install again but an msi file was missing. So I did a de-install agian. Tried to re-install again but with a lot of errors. After looking at the library I found a program: Windows Install CleanUp. I installed it and that even gives an error for all programs installed with SQL 2005. After that I ran a program called MsiInv to clean but without any succes because this program reported a run-tim error. I have all reports on my computer but don't know how to attach them. If you think you can help me I could send you all the reports. Regards,
I have never installed sql server before and I didnt know if I just take the sql server 2005 standard edition media and boot off it and do a fresh install that way or do I have to install Windows server
Hi friends, I am unable to Install the sql 2005 exp. edition under the vs2005 on windows xp sp2. It gives error "sql express returns some value to os". Please co-operate with me thank u.
I am learning ASP.NET from teach yourself ASP.NET in 24 hours. When i try to connect to the SQL Server i get an error "SQL Server does not exist or access denied". SQL appears to exist, and to be running. I am trying to connect through Localhost. Where should i be looking if access is being denied by a firewall and how should i disable it
Hi, I am working on installing SP2 for SQL Server 7.0. Do I have to install the SP2 on every SQL Server 7.0 Client machine? or do I have to do anything on the client machines? Thank you.
Whenever we install SQL Server 7.0 on a box with 6.5 on it, the installation always fails at the last hurdle. It gives the following error:
Microsoft SQL Server Version Switch An error occured which prevented a succesfull version switch. Please make sure the Registry Editor, Query Analyzer and ISQL are closed, and try running vswutch.exe again.
We've followed all technet article recommendations to no avail. Any ideas ?
I've been trying to re-install 7.0(on my test server) but duuring the wizard setup it says: "Unable to find path HKEKY_LOCAL_MACHINE_SOFTWAREMicrosoftMSSQLSERVERSe tup. A uninstall was done but I don't understand why it won't just install from the CD.
Also How can you change the server name in EM, under the SQL Server Group you have the server name, i.e ServerA. When I put 2000 on the same machine that wouldn't do the re-install for 7.0 it shows the server name as ServerAServerA and I just want to rename it to ServerA. But in EM under 'Registered SQL Server Properties' the server name field is not active for modification.
I would appreciate any help to the up-most. Thanks
I installed SQL 7.0 in windows 2000, at first it was working fine but after a few hours it cannot connect to my database.
I reformat my pc coz I was so desperate to make it work but after reformatting SQL won't work still. It cannot connect with my database which is also the same computer. I tried uninstalling and reinstalling it over and over but I still face the same problem.
The SQL Server Service Manager there's nothing in the Service boxes.
I tried installing SQL Server 2005 for educational purposes. When I double cliked Setup.exe I get the messege "You computer does not meet service pack levels ....."
Hello:We just leased a dedicated server and now want to install SQL Server2000. We though we could just copy the contents of the CD to a folderon the server and run AUTORUN. While it does load the splash screen,when we click install SQL Server Components, the demoshield splashscreen comes up and then disappears. The install stops.Any ideas? Is this even possible?Thanks in advance.Jason Sweet
Hi;I am new to sql. I want to install MSSQL 2000 and have connectivity ( I amlearning DB design). I do not know how to setup the SQL Executive account. Ithink it has something to do with network. I am using single PC ( nonetwork). I need server and client on my PC and don't know how to do it,.Could somebody explain how to do it or point me to book or any material howto do it so I can connect to DB, please.Thanks in advance.
Hello, I know that IIS needs to be installed in order to utilize SQL Server Reporting Services. My question is, can the installation of IIS be automated so that I am not relying on end-users who are not that computer literate to install IIS?
I'm facing a problem while installing SQL CE 2.0 on my Desktop PC. It tells that the system must be installed with service pack 1 or higher for SQL Server 2000. I have installed service pack 3a and tried again. But then also i'm getting the same error message. Can anybody help me on this problem.
Hello, I am wondering if anyone has any suggestions regarding the requirement of SQL Express of ASP.NET 2.0 and that this may "break" existing applications that require ASP.NET 1.1 and will not run on ASP.NET 2.0
I currently have SQL Server Express and SQL Server Management Studio Express v.9.00.1399.00 (CTP). Both were installed in Dec 2005. I have not updated these products since then and have noticed that there is now a SP2 available, which I would like to install
I also have VWD, VB and VC# Express editions. However, for these I have already installed SP1
I understand that that I need to uninstall SQL Server and SSMSE before I can install SP2 or SP2 with Advanced Services. What would happen to the other Express editions just mentioned (VWD, VB, VC#)? Do they need to be uninstalled too? Or will they continue to work as normal if I don´t re-install?
Hi: I'm just getting started with ASP.net and am trying to install MSDE. I am getting the error message : Instance specified name is invalid. I have followed the directions in the downloadpage. Any help??
