Installation Of SQL Server 2005 + RS Fails On A Vista 64 Bits

Feb 27, 2007

Hello,

I'm trying to install a version of SQL server 2005 with reporting services on a vista 64 bits.

I've a licence for SQL server 2005 standard edition in French, my vista is in French, and I'm using visual studio standard edition in English to develop. I would like to develop reports using SQL server to include these reports in my applications developped with Visual Studio.

Wich version of SQL server should I install ? I've tryed to install SQL server express 2005 with advanced feature SP2 (english version) and then later the standard edition (French version) (each time uninstalling all SQL server components between tries), but I got problems with reporting services each time.

I got first a warming saying than reporting services is 32 bits and IIS is 64 bits, I so allowed IIS to run 32 bits ASP .Net, but after that, I now get a problem of .Net registration in IIS as warming message on the line concerning Reporting services during the install of SQL Server, and it doesn't even offer to install RS on the next window.

I reinstalled the DotnetFX64 to be sure, but still get the same message. If I look in the IIS the application pools are looking me to be normal, with the ASPNET 32 bit code allowed.

View 11 Replies


ADVERTISEMENT

SQL Server Express Installation Fails On Vista Home Premium

May 8, 2007

I have recently updated from XP to Vista Home Premium. Now when I try to install SQL Serve Express SP2 I get :



"setup has detected problem with .net framework installation
and cannot proceed. Microsoft .net framework 2.0 is either not installed or
is corrupt."



I have tried to run sfc /scannow to make sure my .NET 2.0 was not corrupted and also was running as an administrator but could not get it installed. Anyone has any ideas?

View 1 Replies View Related

Log Shipping Between Sql Server 2000 64 Bits And Sql Server 2005 32 Bits

Apr 16, 2007

Hello



I want make log shipping between a Sql Server 2000 64 bits itanium (primary server) and a SQL Server 2005 32 bits.

Is it possible or I'll have got any problem?







Thanks you



View 1 Replies View Related

Installation Fails On Vista RTM

Nov 24, 2006

Hi all!

I couldn't manage to install SQL Server 2005 Express or Standart Edition on Windows Vista. The installation fails with the error message I pasted below:

TITLE: Microsoft SQL Server 2005 Setup
------------------------------

SQL Server Setup failed to execute a command for server configuration. The error was [Microsoft][SQL Native Client][SQL Server]Windows NT user or group 'FUSIONSQLServer2005MSSQLUser$FUSION$MSSQLSERVER' not found. Check the name again.. Refer to the server error logs and Setup logs for detailed error information.

For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=29521&EvtType=lib%5codbc_statement.h%40Do_sqlScript%40OdbcStatement%3a%3aexecute_batch%40CnfgSQL%4080%40x3c29

Can someone please help me on this as this is an urgent situation...

Thanks in advance

Derya

View 8 Replies View Related

MSDE 2000 Installation Fails On Windows Vista 64-bit

May 30, 2006



Installation of MSDE 2000 fails on 64-bit Windows Vista (Build 5308).

The error message is "Setup failed to configure the server.Please refer the error logs for more information". No error log can be found on the machine at the time of installation. Please let me know if anyone else has encountered this problem?

Is it possible to install MSDE 2000 on 64-bit Windows Vista(Build 5308)?

Thanks in advance.

View 4 Replies View Related

SQL Express Installation Fails During Setup, Vista Permission Problem?

Feb 7, 2008



I'll install SQL Server Express SP2 on Vista during my Setup.
But the setup beaks with error 110.
In other articles it sounds like an folder access problem.
On a Custom Action Type 210 i start a application which execute the sqlexpress.exe.
I tried some other codes to impersonate or noImersonate but without success.

But i can not use the unpacked files because size is to large(170MB)

An good Idea would be unpack the setup files during setup to an custom folder with right permissions.
But I dont know how unpack files without GUI (SQLEXPRESS x always show the GUI).

Any Idea???????????

Here are the corresponding logfiles:


------------------------------------------------------------------------------------------------
Core.log

...
Unattended=true
WorkDir=e:a3d45fa9ced92ee76a8e8275
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:384}
SCU_SetupMgr::InstallComponent state=INSTALL, cancel_state=0, is_done=0, ActionRequired=1, NeedReboot=0, custom_props={AutoStart=true
DotNetPatch=
HandleReboots=false
ModuleDir=e:a3d45fa9ced92ee76a8e8275
QuietMode=true
SNACPatch=
SupportPatch=
Unattended=true
WorkDir=e:a3d45fa9ced92ee76a8e8275
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:384}
<Func Name='SnacComp::InstallImp'>
Failed to install SNAC
Failed to install SNAC : (110) {e:sql9_sp2_tsqlsetupsqlcudllsnaccomp.cpp:251}
SCU_SetupMgr:vc() caught exception: Failed to install SNAC : (110) {e:sql9_sp2_tsqlsetupsqlcudllsnaccomp.cpp:251}. SetupMgr: state=ERROR, cancel_state=0, is_done=0, ActionRequired=1, NeedReboot=0, custom_props={AutoStart=true
DotNetPatch=
HandleReboots=false
ModuleDir=e:a3d45fa9ced92ee76a8e8275
QuietMode=true
SNACPatch=
SupportPatch=
Unattended=true
WorkDir=e:a3d45fa9ced92ee76a8e8275
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:520}
<EndFunc Name='UpdateComponents' Return='1603' GetLastError='0'>
Component update returned a fatal error : 110
Error Code: 0x8007006e (110)
Windows Error Text: Das System kann das angegebene Gerät oder die angegebene Datei nicht öffnen.

Source File Name: sqlncli.msi
Compiler Timestamp: Thu Oct 5 12:22:33 2006
Function Name: Unknown
Source Line Number: 1583

Error: Failed to add file :"E:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_DEVELOPMENT-PC_.NET Framework 2.0.log" to cab file : "E:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0001.cab" Error Code : 2
Running: UploadDrWatsonLogAction at: 2008/1/7 8:3:25
Failed to launch Watson with error code : 123
Message pump returning: 110


-----------------------------------------------------------------------------------------------------------------------------------------------


SNAC.log

=== Verbose logging started: 07.02.2008 08:03:24 Build type: SHIP UNICODE 4.00.6000.00 Calling process: E:Windowssystem32msiexec.exe ===
MSI (c) (ACC) [08:03:24:840]: Resetting cached policy values
MSI (c) (ACC) [08:03:24:840]: Machine policy value 'Debug' is 0
MSI (c) (ACC) [08:03:24:840]: ******* RunEngine:
******* Product: e:a3d45fa9ced92ee76a8e8275setupsqlncli.msi
******* Action:
******* CommandLine: **********
MSI (c) (ACC) [08:03:24:840]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (ACC) [08:03:24:840]: Grabbed execution mutex.
MSI (c) (ACC) [08:03:24:871]: Cloaking enabled.
MSI (c) (ACC) [08:03:24:871]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (ACC) [08:03:24:903]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (E4:98) [08:03:24:918]: Grabbed execution mutex.
MSI (s) (E4:5C) [08:03:24:918]: Resetting cached policy values
MSI (s) (E4:5C) [08:03:24:918]: Machine policy value 'Debug' is 0
MSI (s) (E4:5C) [08:03:24:918]: ******* RunEngine:
******* Product: e:a3d45fa9ced92ee76a8e8275setupsqlncli.msi
******* Action:
******* CommandLine: **********
MSI (s) (E4:5C) [08:03:24:918]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (E4:5C) [08:03:24:934]: SRSetRestorePoint skipped for this transaction.
MSI (s) (E4:5C) [08:03:24:934]: Note: 1: 1402 2: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer 3: 2
MSI (s) (E4:5C) [08:03:24:934]: Note: 1: 1309 2: 5 3: e:a3d45fa9ced92ee76a8e8275setupsqlncli.msi
MSI (s) (E4:5C) [08:03:24:949]: MainEngineThread is returning 110
MSI (s) (E4:98) [08:03:24:949]: No System Restore sequence number for this installation.
Das System kann das angegebene Gerät oder die angegebene Datei nicht öffnen.
MSI (c) (ACC) [08:03:24:949]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (ACC) [08:03:24:949]: MainEngineThread is returning 110
=== Verbose logging stopped: 07.02.2008 08:03:24 ===


Regards Sven

View 1 Replies View Related

SQL Express Fails On Setup Support Files Installation On Vista

Mar 13, 2007

Hi
We have a problem installing SQL Express Edition SP1 on Vista. The installation stops during installation of setup support files with the following message:

Errors occurred during the installation:Error 2 installing Microsoft SQL Server 2005 Setup Support Files. See log file for more detailed information.Det går inte att hitta filen. (translated: File not found)
The log file points to the support.log file with the following content:

=== Verbose logging started: 2007-03-13 17:34:23 Build type: SHIP UNICODE 4.00.6000.00 Calling process: C:cd nät40..SQLEXPRSetup.exe ===MSI (c) (C4:F4) [17:34:23:450]: Resetting cached policy valuesMSI (c) (C4:F4) [17:34:23:450]: Machine policy value 'Debug' is 0MSI (c) (C4:F4) [17:34:23:450]: ******* RunEngine: ******* Product: C:cd nät40..SQLEXPRSetupSqlSupport.msi ******* Action: ******* CommandLine: **********MSI (c) (C4:F4) [17:34:23:450]: Client-side and UI is none or basic: Running entire install on the server.MSI (c) (C4:F4) [17:34:23:450]: Grabbed execution mutex.MSI (c) (C4:F4) [17:34:23:591]: Cloaking enabled.MSI (c) (C4:F4) [17:34:23:591]: Attempting to enable all disabled privileges before calling Install on ServerMSI (c) (C4:F4) [17:34:23:607]: Incrementing counter to disable shutdown. Counter after increment: 0MSI (s) (00:10) [17:34:23:622]: Grabbed execution mutex.MSI (s) (00:1C) [17:34:23:622]: Resetting cached policy valuesMSI (s) (00:1C) [17:34:23:622]: Machine policy value 'Debug' is 0MSI (s) (00:1C) [17:34:23:622]: ******* RunEngine: ******* Product: C:cd nät40..SQLEXPRSetupSqlSupport.msi ******* Action: ******* CommandLine: **********MSI (s) (00:1C) [17:34:23:622]: Machine policy value 'DisableUserInstalls' is 0MSI (s) (00:1C) [17:34:23:669]: SRSetRestorePoint skipped for this transaction.MSI (s) (00:1C) [17:34:23:669]: Note: 1: 1402 2: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer 3: 2 MSI (s) (00:1C) [17:34:23:669]: Note: 1: 1324 2: .. 3: 1 MSI (s) (00:1C) [17:34:23:669]: MainEngineThread is returning 2MSI (s) (00:10) [17:34:23:669]: No System Restore sequence number for this installation.MSI (c) (C4:F4) [17:34:23:669]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1MSI (c) (C4:F4) [17:34:23:669]: MainEngineThread is returning 2=== Verbose logging stopped: 2007-03-13 17:34:23 ===
The funny thing here is that it works fine when the installer is run from a network share, ie \testserversetupsetup.exe but when the same folder is burned to a CD or copied to a local folder it fails. I have verified that the folders are identical.

I'm not sure what info is required to pinpoint the problem but here are some log files and a screen shot of the message.

Any help or pointers would be greatly appreciated.

Regards,
Martin

View 5 Replies View Related

Sql Server 2005 Installation On Vista Ultimate

Apr 3, 2007

Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :



SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility

* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.



Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?



Any work around for this issue?



P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?

I am running on Vista Ultimate and Installing Sql Server 2k5 enterprise edition



Thanks.

View 2 Replies View Related

SQL Server 2005 Express &&amp; Vista Installation

Sep 1, 2006

Hi

I have installed the Beta version for Windows Vista and installed VS 2005 for Software Developers which includes SQL Server Express.

When installing the SQL Server express part compatibility issues appear. Do i need to install a fresh copy of SQL Server Express which inlcludes Service Pack 1?

I cannot connect to any mdf file through the data connection section in the VS 2005 IDE. Cant remember the exact error message, something like "Cannot find the entry or starting point".

I am running a fresh install off the latest Dotnetnuke starter kit and get a database compatibility error so my guess is this could also be as a result of SP 1 not being installed?

Any help or suggestions appreciated.

Thanks

View 7 Replies View Related

SQL Server 2005 Installation Failure On Vista

Jan 24, 2007

Help! I'm trying to install SQL Server 2005 on 32-bit Vista RTM. Have tried several editions (Developer, Standard, Enterprise). Have tried installing while logged in as domain user account in machine administrator group as well as built-in Administrator user. Running SETUP program with elevated privilges. Certain portions (Analysis services, Notification services) install correctly, but never the database engine. Always fails consistently with the same error reported. Machine has Visual Studio 2005 installed already, but NOT SQL Server 2005 Express Edition. Error logs reports are below ({computer name} is the name of my machine)

UI error reported:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
SQL Server Setup failed to execute a command for server configuration. The error was [Microsoft][SQL Native Client][SQL Server]Windows NT user or group '{computer name}SQLServer2005MSSQLUser${computer name}$MSSQLSERVER' not found. Check the name again.. Refer to the server error logs and Setup logs for detailed error information.

Portion of Setup error log reports:

SQL_SUCCESS_WITH_INFO (1) in OdbcConnection::connect
sqlstate=01000, level=-1, state=-1, native_error=5701, msg=[Microsoft][SQL Native Client][SQL Server]Changed database context to 'master'.
sqlstate=01000, level=-1, state=-1, native_error=5703, msg=[Microsoft][SQL Native Client][SQL Server]Changed language setting to us_english.
SQL_SUCCESS_WITH_INFO (1) in OdbcStatement::execute_batch
sqlstate=01000, level=0, state=1, native_error=5701, msg=[Microsoft][SQL Native Client][SQL Server]Changed database context to 'master'.
SQL_SUCCESS_WITH_INFO (1) in OdbcStatement::execute_batch
sqlstate=01000, level=0, state=1, native_error=15457, msg=[Microsoft][SQL Native Client][SQL Server]Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
SQL_SUCCESS_WITH_INFO (1) in OdbcStatement::execute_batch
sqlstate=01000, level=0, state=1, native_error=15457, msg=[Microsoft][SQL Native Client][SQL Server]Configuration option 'default language' changed from 0 to 0. Run the RECONFIGURE statement to install.
sqlstate=01000, level=0, state=1, native_error=15457, msg=[Microsoft][SQL Native Client][SQL Server]Configuration option 'default full-text language' changed from 1033 to 1033. Run the RECONFIGURE statement to install.
SQL_SUCCESS_WITH_INFO (1) in OdbcStatement::execute_batch
sqlstate=01000, level=0, state=1, native_error=15457, msg=[Microsoft][SQL Native Client][SQL Server]Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install.
SQL_ERROR (-1) in OdbcStatement::execute_batch
sqlstate=42000, level=11, state=1, native_error=15401, msg=[Microsoft][SQL Native Client][SQL Server]Windows NT user or group '{computer name}SQLServer2005MSSQLUser${computer name}$MSSQLSERVER' not found. Check the name again.
sqlstate=42000, level=16, state=1, native_error=15007, msg=[Microsoft][SQL Native Client][SQL Server]'{computer name}SQLServer2005MSSQLUser${computer name}$MSSQLSERVER' is not a valid login or you do not have permission.
Error Code: 0x80073c29 (15401)
Windows Error Text: Source File Name: libodbc_statement.h
Compiler Timestamp: Mon Jun 13 14:30:24 2005
Function Name: OdbcStatement::execute_batch@CnfgSQL@80
Source Line Number: 91

View 13 Replies View Related

SQL Server 2005 Install Fails On Vista

Feb 22, 2007

During the install, I get the following message:

Setup has detected a problem with Microsoft .Net Framework installation and cannot proceed. Microsoft .Net Framework 2.0 is either not installed on this system or is corrupt.



I cannot uninstall 2.0, as its part of the Vista. I have tried repairing it.

I tried downloading 2.0 and installing it, but it says that its allready installed.

I was able to install Visual Studio with Sql Server 2005 express.

I am stuck. Is the case that Sql install dosent know about the latest version of 2.0 that came with vista ?

View 38 Replies View Related

Problem On Connecting SQL Server Using ODBC 32 Bits On 64 Bits OSSQL Database

Apr 9, 2008

I've a 32 bits application that runs on 64 bits Windows Server+MS-SQL.
I've created an ODBC DSN using c:WindowsSysWow64odbcad32.exe.
Sp, the program recognize the ODBC but having problem connecting.
The error look likes this:
***
[Microsoft][ODBC SQL Server Driver][SQL Server]Could not find server '<name>' in sys.server. Verify that the correct server name was specified. If necessary, execute the stored procedure sp_addlinkedserver to add the server to sys.servers.
***

Any help is appreciated.

Regards,
Ben

View 1 Replies View Related

Sql Server 2005 Installation In Vista Home Basic

Jul 26, 2007

hi
i have windows vista home basic.I am trying to install sql server 2005.
I have two issue:
1)Its always throwing a popup window saying sql server has a know issue and do you want to continue.
2)I am not able to connect to any database engine.

Please help.

View 5 Replies View Related

SQL Server 2005 Installation Failure On Vista - Hangs At IIS

Feb 16, 2007

I just bought a new laptop with Vista pre-installed and was able to install Visual Studio 2005 Pro, but when attempting to install SQL Server 2005 it just hangs at the IIS detection step. I was using the administrative account. I was able to install the Developer Edition of SQL Server 2000, but I need 2005.

Some posts mention IIS version issues and 32 vs 64 bit version issues. Can anyone ellaborate on what is happening and why? What is the work around?



View 6 Replies View Related

SQL Server 2005 Express SP2 On Vista RTM Fails To Install

Nov 18, 2006

When I was trying to SQL Server 2005 Express SP2 (November CTP) on Vista RTM, setup failed on the Database Services component with the following log messages:

SQL service MSSQL$SQLEXPRESS started successfully waiting for SQL service to accept client connectionsService MSSQL$SQLEXPRESS started at Sat Nov 18 09:21:28 2006SQL_SUCCESS_WITH_INFO (1) in OdbcConnection::connectsqlstate=01000, level=-1, state=-1, native_error=5701, msg=[Microsoft][SQL Native Client][SQL Server]Changed database context to 'master'.sqlstate=01000, level=-1, state=-1, native_error=5703, msg=[Microsoft][SQL Native Client][SQL Server]Changed language setting to us_english.SQL_SUCCESS_WITH_INFO (1) in OdbcStatement::execute_batchsqlstate=01000, level=0, state=1, native_error=5701, msg=[Microsoft][SQL Native Client][SQL Server]Changed database context to 'master'.SQL_SUCCESS_WITH_INFO (1) in OdbcStatement::execute_batchsqlstate=01000, level=0, state=1, native_error=15457, msg=[Microsoft][SQL Native Client][SQL Server]Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.SQL_SUCCESS_WITH_INFO (1) in OdbcStatement::execute_batchsqlstate=01000, level=0, state=1, native_error=15457, msg=[Microsoft][SQL Native Client][SQL Server]Configuration option 'default language' changed from 0 to 0. Run the RECONFIGURE statement to install.sqlstate=01000, level=0, state=1, native_error=15457, msg=[Microsoft][SQL Native Client][SQL Server]Configuration option 'default full-text language' changed from 1033 to 1033. Run the RECONFIGURE statement to install.SQL_SUCCESS_WITH_INFO (1) in OdbcStatement::execute_batchsqlstate=01000, level=0, state=1, native_error=15457, msg=[Microsoft][SQL Native Client][SQL Server]Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install.SQL_ERROR (-1) in OdbcStatement::execute_batchsqlstate=42000, level=11, state=1, native_error=15401, msg=[Microsoft][SQL Native Client][SQL Server]Windows NT user or group 'TEHBOXSQLServer2005MSSQLUser$TEHBOX$SQLEXPRESS' not found. Check the name again.sqlstate=42000, level=16, state=1, native_error=15007, msg=[Microsoft][SQL Native Client][SQL Server]'TEHBOXSQLServer2005MSSQLUser$TEHBOX$SQLEXPRESS' is not a valid login or you do not have permission. Error Code: 0x80073c29 (15401)Windows Error Text: Source File Name: libodbc_statement.hCompiler Timestamp: Wed Aug 2 16:21:02 2006 Function Name: OdbcStatement::execute_batch@CnfgSQL@80Source Line Number: 91---- Context -----------------------------------------------Connecting to SQL ServerExecuteSqlCommandsUSE [master ]<Started SQL statement: Sat Nov 18 09:21:28 2006>declare @ServerName nvarchar(255) if not exists (select * from sysservers) begin select @ServerName = Convert(nvarchar(255), SERVERPROPERTY(N'ServerName')) execute sys.sp_addserver @ServerName, local end<Finished SQL statement: Sat Nov 18 09:21:28 2006><Started SQL statement: Sat Nov 18 09:21:28 2006>ALTER DATABASE model SET RECOVERY SIMPLE<Finished SQL statement: Sat Nov 18 09:21:28 2006><Started SQL statement: Sat Nov 18 09:21:28 2006>EXEC sp_configure N'show advanced options', 1 RECONFIGURE WITH OVERRIDE<Finished SQL statement: Sat Nov 18 09:21:28 2006><Started SQL statement: Sat Nov 18 09:21:28 2006>DECLARE @Name AS nvarchar(128), @LangID AS smallint SELECT @Name=name, @LangID=langid FROM syslanguages WHERE lcid=1033 EXEC sp_defaultlanguage N'sa', @Name EXEC sp_configure N'default language', @LangID EXEC sp_configure N'default full-text language', 1033 RECONFIGURE WITH OVERRIDE<Finished SQL statement: Sat Nov 18 09:21:28 2006><Started SQL statement: Sat Nov 18 09:21:28 2006>EXEC sp_configure N'show advanced options', 0 RECONFIGURE WITH OVERRIDE<Finished SQL statement: Sat Nov 18 09:21:28 2006><Started SQL statement: Sat Nov 18 09:21:28 2006>EXEC sys.sp_grantlogin N'BUILTINAdministrators' EXEC sys.sp_addsrvrolemember N'BUILTINAdministrators', N'sysadmin'<Finished SQL statement: Sat Nov 18 09:21:28 2006><Started SQL statement: Sat Nov 18 09:21:28 2006>EXEC sys.sp_grantlogin N'NT AUTHORITYSYSTEM' EXEC sys.sp_addsrvrolemember N'NT AUTHORITYSYSTEM', N'sysadmin'<Finished SQL statement: Sat Nov 18 09:21:28 2006><Started SQL statement: Sat Nov 18 09:21:28 2006>EXEC sys.sp_grantlogin N'TEHBOXSQLServer2005MSSQLUser$TEHBOX$SQLEXPRESS' EXEC sys.sp_addsrvrolemember N'TEHBOXSQLServer2005MSSQLUser$TEHBOX$SQLEXPRESS', N'sysadmin'Originial error was 80073c29 (15401)Do_sqlScriptSqlScriptHlprError Code: 15401MSI (s) (98:50) [09:21:30:219]: I/O on thread 3236 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 3300 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 3652 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 3424 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 3244 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 3544 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 3064 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 3428 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 2000 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 1740 could not be cancelled. Error: 1168MSI (s) (98!78) [09:21:30:219]: Product: Microsoft SQL Server 2005 -- Error 29521. SQL Server Setup failed to execute a command for server configuration. The error was [Microsoft][SQL Native Client][SQL Server]Windows NT user or group 'TEHBOXSQLServer2005MSSQLUser$TEHBOX$SQLEXPRESS' not found. Check the name again.. Refer to the server error logs and Setup logs for detailed error information.Error 29521. SQL Server Setup failed to execute a command for server configuration. The error was [Microsoft][SQL Native Client][SQL Server]Windows NT user or group 'TEHBOXSQLServer2005MSSQLUser$TEHBOX$SQLEXPRESS' not found. Check the name again.. Refer to the server error logs and Setup logs for detailed error information.

TEHBOXSQLServer2005MSSQLUser$TEHBOX$SQLEXPRESS exists and contains NT AUTHORITYNETWORK SERVICE when the error occurs.

Any suggestions on how to get SQL Server to install on Vista?

View 4 Replies View Related

Installation Error In Sql Server 2005 Enterprise Edition On Vista RTM

Feb 5, 2007

Hi Every One,

I would like to install the Sql Server 2005 on Vista RTM. prevoiusly I had Vista RC1 on which it was working fine.

Now, as the installation starts, the Vista Error dialog box gets appeared and the asks for the debugging, close or Online solution.

Please help me to install that.



Thanking you



gaurav gupta

View 1 Replies View Related

SQL Server 2005 Installation On Windows Vista Home Premium

Mar 8, 2007

Hi Every One,

I am trying to install SQL Server 2005 on Windows Vista Home Premium edition, when I run the Installer I received  are the following error message.

 IIS Feature Requirement (Warning)



Messages

IIS Feature Requirement


Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.

I already configure IIS7 with all feature, but system still generate above mentioned message.

View 18 Replies View Related

IIS &&amp; SQL Server 2005 Express Edition Installation Problems In Vista

Mar 12, 2007



Hi,

Im encountering yet another problem in Vista(Vista Home Premium). I have turned on all IIS features from control panel. When I open http://localhost it gives the error
HTTP Error 404.4 - Not Found

Description: The resource you are looking for does not have a handler associated with it

How should i resolve this?

Also, when I try to install SQL server 2005 express edition, it gives the warning that IIS is not installed, though I have installed all the features and it is running.

I have been struggling for the past one week, just to install SQL server on vista!

Please help.

Thanks

View 4 Replies View Related

SQL Server 2005 Installation Vista (+SP2), No Services, Doesnt Work

Nov 16, 2007



While installing SQL Server 2005 Enterprise Edition on Windows Vista Ultimate
the setup alerts me "there are known compatibility problems, please
install SP2 after this". So ok, all went nice and installed without error.
IIS 7 installed fully, so all green in setup display.
(But after installation i do not see any service which begins with SQL***...)
At the end, the setup wanted to start the administration Tool.
Ok, but my name was not listed, so i could not add me to the permitted users.
I can not use any tool, because i have no rights.

Some Ideas?

Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services-Clienttools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 6.0.6000.16386 (vista_rtm.061101-2205)
Microsoft MSXML 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 7.0.6000.16546
Microsoft .NET Framework 2.0.50727.312
Betriebssystem 6.0.6000


thanks Frank

View 6 Replies View Related

SQL Server 2005 Installation Fails

Nov 23, 2006

I am running Windows XP SP2. The installation fails with

SQL Server coul not connect to the database service for server configuration.

[SQL Native Client]Unable to complete login process due to delay in opening server conection.



Please help in getting this working, I have not been able to find anything by googling thus far.

Regards

Harald Hedlund

View 1 Replies View Related

Problem With ODBC 32 Bits In A Server Of 64 Bits

Nov 19, 2007


Hello,

This is my first post in this forum, I have one application built in asp .net, through a ODBC connect to a external database (prinex). The application was running in a 32bits server, but the server had to stop and now there is running in a machine of 64 bits.

The driver that use in server of 32 bits only exists for this version, right now i have to use the same for the 64 bits machine, i can install and configure the DSN (using c:WindowsSysWow64odbcad32.exe).

But at the time of execute the aplicattion an error is displayed. ¿How can i solve this problem?, ¿There is a way to force the application to use 32 bits DSN? ¿There is an alternative solution for connect to the database? ¿Someone had the same problem?

This is the image of the error:
http://img404.imageshack.us/img404/8168/errorwebbn1.png

If somebody can help me, i would be very grateful.

PD: Sorry for my english.

View 1 Replies View Related

SQL Server 2005 Database Installation Fails To Install

May 9, 2007

Hi,

I have been trying to install SQL Server 2005 developer version on my second laptop IBM Thinkpad Windows XP PRO, for the first time. All other components installed successfully except the database. I 've tried selecting the named instance and default instance it didn't make any difference. I have a Admin role on the laptop and as a service id I selected my user id. password and domain. I am running the setup behind my company's firewall.

The error in the log is :



Doing Action: Do_UpdateETWMOFWithGUID
PerfTime Start: Do_UpdateETWMOFWithGUID : Wed May 09 11:07:46 2007
<Func Name='Do_UpdateETWMOFWithGUID'>
Calling installSqlEvent Trance
The arguments that are passed to InstallSqlEventTrace are InstanceName: SQLSERVER2005 , ProductCodeL: {2373A92B-1C1C-4E71-B494-5CA97F96AA19} , BinPath: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn
INFO: Checking installed version
INFO: Writing MOF file
ERROR: Unable to open registry key: HRESULT = 0x80070005, Key = SYSTEMCurrentControlSetControlWMISecurity

The value returned is -2147024891
<EndFunc Name='Do_UpdateETWMOFWithGUID' Return='1603' GetLastError='0'>
PerfTime Stop: Do_UpdateETWMOFWithGUID : Wed May 09 11:07:46 2007
Gathering darwin properties for failure handling.
Error Code: 1603

MSI (s) (88!E0) [11:09:48:898]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.


Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.


I have tried to attach the log but I think it is too big. I cannot post this message.

Please let me know another way to send the log file.



Any help is appreciated.

View 1 Replies View Related

Installation Of SQL Server 2005 Post-SP1 Hotfix 918222 (Build 2153) Fails At Copyengine.cpp Line: 689

Feb 5, 2007

I believe that I mistakenly attempted to apply the Analysis Services component of this update before applying the SQL Server component. The update now fails continuously with the following message:

02/05/2007 17:58:24.990 ================================================================================
02/05/2007 17:58:25.021 Hotfix package launched
02/05/2007 17:58:27.615 Product discovery successfully completed during the install process for MSSQLSERVER
02/05/2007 17:58:27.630 SP Level check successfully completed during the install process for MSSQLSERVER
02/05/2007 17:58:27.646 Product language check successfully completed during the install process for MSSQLSERVER
02/05/2007 17:58:27.661 Product version check successfully completed during the install process for MSSQLSERVER
02/05/2007 17:58:27.677 Command-line instance name check completed during the install process
02/05/2007 17:58:27.693 Baseline build check completed during the install process
02/05/2007 17:58:34.864 Attempting to install instance: MSSQLSERVER
02/05/2007 17:58:34.974 Attempting to install target: CHARLIDEVSRV
02/05/2007 17:58:35.005 Attempting to check for locked files: sqlrun_sql.msp
02/05/2007 17:58:35.052 Attempting to check for locked files: \CHARLIDEVSRVf$44923e05996203228c1608bea1hotfixsqlFilessqlrun_sql.msp
02/05/2007 17:58:35.067 Creating MSP locked file check log at: C:WINDOWSHotfixSQL9LogsSQL9_Hotfix_KB918222_sqlrun_sql.msp.out
02/05/2007 18:01:52.978 MSP returned 1635: This patch package could not be opened. Verify that the patch package exists and is accessible, or contact the application vendor to verify that this is a valid Windows Installer patch package.
02/05/2007 18:01:53.009 Unable to check MSP file: \CHARLIDEVSRVf$44923e05996203228c1608bea1hotfixsqlFilessqlrun_sql.msp
02/05/2007 18:01:53.025 The following exception occurred: Unable to install Windows Installer MSP file Date: 02/05/2007 18:01:53.025 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllcopyengine.cpp Line: 689
02/05/2007 18:01:53.212 Failed to install instance: MSSQLSERVER
02/05/2007 18:01:53.259
02/05/2007 18:01:53.259 Product Status Summary:
02/05/2007 18:01:53.290 Product: SQL Server Database Services 2005
02/05/2007 18:01:53.306 MSSQLSERVER - Failure
02/05/2007 18:01:53.321


The update fails although I have cleaned the registry of any reference to it. Another article indicated that the hotfix may delete registry keys required, for instance, to operated SSIS if applied in the wrong order. Here, it appears to be preventing the hotfix from being reapplied. I have ensured that all necessary permissions are available and the services are running in domain user accounts with the necessary rights. I'm the administrator on the machine.

Is there a way to get this hotfix applied without having to completely rip and rebuild my server instance?

View 4 Replies View Related

AWE Enable And SQL Server 2005 X64 Bits

Apr 20, 2006

Hello,

I am setting up a new server with Windows Server 2003 x64 bits and SQL Server 2005 x64 bits. Under 32 bits of Windows we normally use /3GB and enable AWE under SQL Server (both SQL 2000 and SQL 2005) and allocate 6 GB of fixed memory to SQL Server.

Does any one know whether I should do the same thing under the x64 bits platform. I read some articles on the web that it is no longer required to use AWE under SQL 2005 x64 bits??

Please advise.

Thanks.

View 6 Replies View Related

SQL Server 2005 Server Installation Fails

Oct 8, 2007

Downloaded and installed Visual Studio 2008 Express Editions Beta 2 applications in order:


Visual Basic 2005 Express Edition

Visual C# Express Edition

Visual C++ Express Edition

SQL Server 2005 Express Edition (Advanced)
All went well untill the SQL Server installation. Get an error message stating:


"An installation package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli.msi'."

The "Setup Progress" dialog box displays a "Setup failed." error beside "SQL Native Client" and "SQL Server Database Services" and then closes generating the "Send Error Report" dialog box. A log file is generated but can't find anything meaningful regarding the problem.

HELP!

View 1 Replies View Related

Vista RTM And SQL 2005 Developer Installation

Nov 29, 2006

Hi,

Two questions:

1) How do I correctly install SQL 2005 Developer and the SP2 CTP on Vista?
2) Is there a way to slipstream SP2?

I've taken the following steps:

Built Vista Ultimate as a clean install.
Turned on features in Vista and installed all components of IIS.
Restarted system
Connected to a Network

Installed the SQL 2005 Developer CD 1 with two warnings on the System Configuration Check screen:

SQL Server Edition Operating System Compatibility
Edition Change Check

On the Components to install screen, I only have one option for installation:

Workstation components, Books Online and development tools.

Thanks in advance...

View 3 Replies View Related

SQL 2005 Installation Problem On Vista

Mar 27, 2008


Hi, there,

I ran into the following problem when installing SQL 2005 developer edition on Vista:

€œSQL Server Setup Failed to compile the Managed Object Format (MOF) file E:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof. To proceed, see "Troubleshooting an Installation of SQL Server 2005" or "How to: View SQL Server 2005 Setup Log Files" in SQL Server 2005 Setup Help documentation.€?

Any helpful hint is appreciated!

View 6 Replies View Related

Sql 2005 Express Installation (Vista Ultimate)

Feb 12, 2008



While installing SQL Server 2005 Express Edition SP2 or SQL Server 2005 Express Edition with Advanced Services SP2

on Vista Ultimate, I get the error "The feature(s) selected are not valid for this edition of SQL server". Then the installation stops and exist. The only feature selected is Database Services, data files and shared tools.

HELP!

View 11 Replies View Related

SQL 2005 Expreess Edition On Server 2008 64-bits

May 2, 2008

Hi,


Does anybody know if the SQL 2005 express edition works on Windows Server 2008 64-bits?

Many Thanks.

View 1 Replies View Related

Upgrade 2K To 2005 Db Engine Fails On Vista From Cmd Prompt

Feb 1, 2008

I need some help please. I've got SQL 2K (default instance) and SQL 2005 Express installed on Vista Ultimate. I want to upgrade the 2K instance to 2005 Developer. I ran this from the command prompt:

D:ENGLISHSQL2005DEVELOPERSQL Server x86Servers>setup.exe ADDLOCAL=All SKUUP
GRADE=1 UPGRADE=SQL_Engine INSTANCENAME=MSSQLSERVER

This is the error message I received (from Summary):


--------------------------------------------------------------------------------
Machine : HPMEDIACENTER
Product : SQL Server Database Services
Error : SQL Server Setup cannot upgrade the instance because the uninstall file is missing or corrupted. The error code is (87) The parameter is incorrect.
--------------------------------------------------------------------------------
Machine : HPMEDIACENTER
Product : Microsoft SQL Server 2005
Product Version : 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0003_HPMEDIACENTER_SQL.log
Last Action : ValidateUpgrade
Error String : SQL Server Setup cannot upgrade the instance because the uninstall file is missing or corrupted. The error code is (87) The parameter is incorrect.
Error Number : 29523
--------------------------------------------------------------------------------

From the Log:

Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): RSVirtualDirectoryManager = Reports
Property(S): RSVirtualDirectoryServer = ReportServer
Property(S): SqlActionManaged = 3
Property(S): SqlStateManaged = 2
Property(S): Sql_sqlSqlUpgradeSequence = 714057000
MSI (s) (14:5C) [22:19:35:714]: Product: Microsoft SQL Server 2005 - Update 'Hotfix 3024 for SQL Server Database Services 2005 ENU (KB000000)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0003_HPMEDIACENTER_SQL.log.
MSI (s) (14:5C) [22:19:35:718]: Windows Installer installed an update. Product Name: Microsoft SQL Server 2005. Product Version: 9.00.1399.06. Product Language: 1033. Update Name: Hotfix 3024 for SQL Server Database Services 2005 ENU (KB000000). Installation success or error status: 1603.
MSI (s) (14:5C) [22:19:35:719]: Note: 1: 1708
MSI (s) (14:5C) [22:19:35:719]: Product: Microsoft SQL Server 2005 -- Installation failed.
MSI (s) (14:5C) [22:19:35:719]: Windows Installer installed the product. Product Name: Microsoft SQL Server 2005. Product Version: 9.00.1399.06. Product Language: 1033. Installation success or error status: 1603.
MSI (s) (14:5C) [22:19:35:720]: Attempting to delete file C:WindowsInstaller1dcfcb3.msp
MSI (s) (14:5C) [22:19:35:720]: Unable to delete the file. LastError = 32
MSI (s) (14:5C) [22:19:35:733]: Cleaning up uninstalled install packages, if any exist
MSI (s) (14:5C) [22:19:35:733]: Attempting to delete file C:WindowsInstaller1dcfcb3.msp


I can't locate anything more about Hotfix 3024...maybe it's in Area 51. Or Studio 54. Or Blink 182...

Should I attach the logs? TIA
John

View 5 Replies View Related

SQL Express 2005 Advanced SP2 (CTP) Installation Issue With Vista Ultimate

Feb 1, 2007

I'm trying to perform a fresh new install of SQL Express 2005 Advanced SP (CTP) on Vista Ultimate RTM but running into an installation issue preventing me from installing the Reporting Services option. When the SQL Express Advanced installation does it's system configuration check, it gives me this warning ...

- IIS Feature Requirement (Warning)



Messages

IIS Feature Requirement


Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.



I do have IIS7 installed and running on my system with all options except for FTP. Why isn't the SQL Express install recognizing IIS7? Is there a workaround? I'd really like to get Reporting Services installed. But SQL Express isn't giving me that option during install because of this IIS issue. Thanks in advance!



View 6 Replies View Related

Sql Serverr 2005 Installation Issue In Vista Home Basic

Jul 26, 2007

hi
i have windows vista home basic.I am trying to install sql server 2005.
I have two issue:
1)Its always throwing a popup window saying sql server has a know issue and do you want to continue.
2)I am not able to connect to any database engine.

Please help.

View 1 Replies View Related

SQL Express 2005 Installation Fails On All Of Our PCs

Mar 1, 2007

The installation fails and crashes with "Error 110", while attempting to install the SQL Native Client... then crashes (DrWatson). This happens on every OS and test machines that we have within our company... flavors of W2K and WXP, all with .Net Framework 2.0.

If the SQL Native Client exists, the installation continues without error. If SQLEXPR32.EXE is run directly from the command line, the installation will succeed.

If SQLEXPR32.EXE is called from a Windows Installer Custom Action type 50, it will always fail. This is the method we used to successfully install MSDE previously.

Our command line is:

/qb ADDLOCAL=SQL_Engine,SQL_Data_Files SAPWD=password1 SECURITYMODE=SQL DISABLENETWORKPROTOCOLS=2 INSTANCENAME=Instance SQLBROWSERAUTOSTART=1 SQLAUTOSTART=1 ENABLERANU=0

The problem appears to start with: Error: Action "ComponentUpdateAction" threw an exception during execution.

-----------------------------------------------

SQLSetup0009_Core.log

Microsoft SQL Server 2005 Setup beginning at Thu Mar 01 08:07:09 2007
Process ID : 852
c:57774bfc862c706a2e923076f41d037csetup.exe Version: 2005.90.3042.0
Running: LoadResourcesAction at: 2007/2/1 8:7:9
Complete: LoadResourcesAction at: 2007/2/1 8:7:9, returned true
Running: ParseBootstrapOptionsAction at: 2007/2/1 8:7:9
Loaded DLL:c:57774bfc862c706a2e923076f41d037cxmlrw.dll Version:2.0.3609.0
Complete: ParseBootstrapOptionsAction at: 2007/2/1 8:7:9, returned true
Running: ValidateWinNTAction at: 2007/2/1 8:7:9
Complete: ValidateWinNTAction at: 2007/2/1 8:7:9, returned true
Running: ValidateMinOSAction at: 2007/2/1 8:7:9
Complete: ValidateMinOSAction at: 2007/2/1 8:7:9, returned true
Running: PerformSCCAction at: 2007/2/1 8:7:9
Complete: PerformSCCAction at: 2007/2/1 8:7:9, returned true
Running: ActivateLoggingAction at: 2007/2/1 8:7:9
Complete: ActivateLoggingAction at: 2007/2/1 8:7:9, returned true
Delay load of action "DetectPatchedBootstrapAction" returned nothing. No action will occur as a result.
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__852" returned false.
Running: PerformSCCAction2 at: 2007/2/1 8:7:9
Complete: PerformSCCAction2 at: 2007/2/1 8:7:9, returned true
Running: PerformDotNetCheck at: 2007/2/1 8:7:9
Complete: PerformDotNetCheck at: 2007/2/1 8:7:9, returned true
Running: ComponentUpdateAction at: 2007/2/1 8:7:9
Error: Action "ComponentUpdateAction" threw an exception during execution. Error information reported during run:
<Func Name='UpdateComponents'>
SCU_SetupMgr::InitComponents()
<Func Name='SnacComp::Init'>
<Func Name='SnacComp::IsRequired'>
SNAC version installing: 9.00.3042.00
The installed SNAC version is less then the installing version
SCU_SetupMgr::svc() state=SS_INIT_DONE, cancel_state=0, is_done=0, ActionRequired=1, NeedReboot=0, custom_props={AutoStart=true
DotNetPatch=
HandleReboots=false
ModuleDir=c:57774bfc862c706a2e923076f41d037c
QuietMode=false
SNACPatch=
SupportPatch=
Unattended=true
WorkDir=c:57774bfc862c706a2e923076f41d037c
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:506}
SCU_SetupMgr::InstallComponent state=INSTALL, cancel_state=0, is_done=0, ActionRequired=1, NeedReboot=0, custom_props={AutoStart=true
DotNetPatch=
HandleReboots=false
ModuleDir=c:57774bfc862c706a2e923076f41d037c
QuietMode=false
SNACPatch=
SupportPatch=
Unattended=true
WorkDir=c:57774bfc862c706a2e923076f41d037c
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:384}
SCU_SetupMgr::InstallComponent state=INSTALL, cancel_state=0, is_done=0, ActionRequired=1, NeedReboot=0, custom_props={AutoStart=true
DotNetPatch=
HandleReboots=false
ModuleDir=c:57774bfc862c706a2e923076f41d037c
QuietMode=false
SNACPatch=
SupportPatch=
Unattended=true
WorkDir=c:57774bfc862c706a2e923076f41d037c
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:384}
SCU_SetupMgr::InstallComponent state=INSTALL, cancel_state=0, is_done=0, ActionRequired=1, NeedReboot=0, custom_props={AutoStart=true
DotNetPatch=
HandleReboots=false
ModuleDir=c:57774bfc862c706a2e923076f41d037c
QuietMode=false
SNACPatch=
SupportPatch=
Unattended=true
WorkDir=c:57774bfc862c706a2e923076f41d037c
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:384}
SCU_SetupMgr::InstallComponent state=INSTALL, cancel_state=0, is_done=0, ActionRequired=1, NeedReboot=0, custom_props={AutoStart=true
DotNetPatch=
HandleReboots=false
ModuleDir=c:57774bfc862c706a2e923076f41d037c
QuietMode=false
SNACPatch=
SupportPatch=
Unattended=true
WorkDir=c:57774bfc862c706a2e923076f41d037c
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:384}
<Func Name='SnacComp::InstallImp'>
Failed to install SNAC
Failed to install SNAC : (110) {e:sql9_sp2_tsqlsetupsqlcudllsnaccomp.cpp:251}
SCU_SetupMgr::svc() caught exception: Failed to install SNAC : (110) {e:sql9_sp2_tsqlsetupsqlcudllsnaccomp.cpp:251}. SetupMgr: state=ERROR, cancel_state=0, is_done=0, ActionRequired=1, NeedReboot=0, custom_props={AutoStart=true
DotNetPatch=
HandleReboots=false
ModuleDir=c:57774bfc862c706a2e923076f41d037c
QuietMode=false
SNACPatch=
SupportPatch=
Unattended=true
WorkDir=c:57774bfc862c706a2e923076f41d037c
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:520}
ScuProgressDlg::SetupFinished()
ScuProgressDlg::DialogProc() installation done... waiting for setup mgr
<EndFunc Name='UpdateComponents' Return='1603' GetLastError='87'>
Component update returned a fatal error : 110
Error Code: 0x8007006e (110)
Windows Error Text: The system cannot open the device or file specified.

Source File Name: sqlncli.msi
Compiler Timestamp: Thu Oct 5 12:22:33 2006
Function Name: Unknown
Source Line Number: 1583

Class not registered.



--------------------------------------------

SQLSetup0009_SNAC.log

=== Verbose logging started: 3/1/2007 8:07:10 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:WINDOWSsystem32msiexec.exe ===
MSI (c) (FC:C8) [08:07:10:062]: Resetting cached policy values
MSI (c) (FC:C8) [08:07:10:062]: Machine policy value 'Debug' is 0
MSI (c) (FC:C8) [08:07:10:062]: ******* RunEngine:
******* Product: c:57774bfc862c706a2e923076f41d037csetupsqlncli.msi
******* Action:
******* CommandLine: **********
MSI (c) (FC:C8) [08:07:10:062]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (FC:C8) [08:07:10:062]: Grabbed execution mutex.
MSI (c) (FC:C8) [08:07:10:109]: Cloaking enabled.
MSI (c) (FC:C8) [08:07:10:109]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (FC:C8) [08:07:10:125]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:5C) [08:07:10:140]: Grabbed execution mutex.
MSI (s) (30:B0) [08:07:10:140]: Resetting cached policy values
MSI (s) (30:B0) [08:07:10:140]: Machine policy value 'Debug' is 0
MSI (s) (30:B0) [08:07:10:140]: ******* RunEngine:
******* Product: c:57774bfc862c706a2e923076f41d037csetupsqlncli.msi
******* Action:
******* CommandLine: **********
MSI (s) (30:B0) [08:07:10:156]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (30:B0) [08:07:10:171]: Note: 1: 1309 2: 5 3: C:57774bfc862c706a2e923076f41d037csetupsqlncli.msi
MSI (s) (30:B0) [08:07:10:171]: MainEngineThread is returning 110
The system cannot open the device or file specified.
MSI (c) (FC:C8) [08:07:10:171]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (FC:C8) [08:07:10:171]: MainEngineThread is returning 110
=== Verbose logging stopped: 3/1/2007 8:07:10 ===

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved