I installed SQL Server 2005.
In the add/remove programs are all the programs visible. But when I use "Start -> All programs -> Microsoft SQL Server 2005", there are only 5 configuration tools, no management studio.
What is going wrong?
Where can I find the executable that start up SQL Server 2005?
I am trying to install SQL Server 2000 on a Win2K OS machine but Iget this error message:"A previous program installation created pending file operations onthe installation machine. You must restart the computer before runningsetup."I see others have had this problem but have fixed it using the solutionin:http://support.microsoft.com/defaul...kb;en-us;312995I have tried the solution but to no avail. The registry key:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lSessionManagerPendingFileRenameOperations keeps reappearing as soon as Iclose RegEdit.Any ideas?Thanks,lq
View 3 Replies View Relatedi need to check that the column exist in the table if yes the update/insert value in the column else i need to add the new column like new browser name in the table.
View 1 Replies View Related
I dont find sql management express in the program folder of sql server 2005. i find configuration manager but dont find the sql server management express. If the program is deleted also then the shortcut is deleted but not the whole program.
i can find the files in the respective folders of program files -> microsoft sql server 2005. but dont know which files start
the sql managment express
database : MS SQL server ver 6.50.201
problem: server startup / server time out
details
SQL server shows usage of 100 % CPU utilization, if started automatically / manually. and does not proceed / hangs up(server time out), but win nt operates extremely slow.
The background of the situation in brief is as stated below.
The errorlog was found to have the messages
warning : OPEN OBJECTS parameter may be too low.
Attempt was made to free up descriptors in localdes()
Run sp_configure to increase parameter value.
Error : 644, severity : 21, state; state 1
the non clustered leaf row entry for page 2 row 1 was not found in index page 40 indexid 2 database 'tempdb'
Error : 2620 severity 21 state 3
the offset of the row number at offset 32 does not match the entry in the offset table of the follwoing page : page pointer = 0x1395800, page no= 40, status = 0x2, objectid = 1, indexid = 2
Action taken
I used the sp_option to increase the open objects from default 500 to 1000, and the LE threshold maximum value to 400 from the default 200.
after which I used reconfigure go and restarted the computer to take the effect. The following did work fine and server was working ok. But then from yesterday I am having the problem that the MS SQL sever is utilizing the cpu to 98 - 99 % and I am not able to connect to the server.
I tried to start the server with the minimal configuration by specifying the -f option in the service manager start up options, it showed the following message
00/12/07 10:40:49.73 ods Unable to connect. The maximum number of '5' configured user connections are already connected. System Administrator can configure to a higher value with sp_configure.
00/12/07 10:40:50.02 ods Unable to connect. The maximum number of '5' configured user connections are already connected. System Administrator can configure to a higher value with sp_configure.
afterwhich I tried with the option of starting the sql server with the option -c -f
which in the event detail of the win nt shows
"mesg 18109: Recovery dbid 6 ckpt(55813,8) oldest tras= (55813,0)"
The open procedure for service "MSSQLServer" in DLL "SQLCTR60.DLL" has taken longer than the established wait time to complete. The wait time in milliseconds is shown in the data.
DB-LIBRARY error - SQL Server connection timed out.
and in the errorlog present in MSSQLLOG directory
00/12/07 15:06:43.24 spid1 Recovering Database 'master'
00/12/07 15:06:43.31 spid1 Recovery dbid 1 ckpt (7944,28) oldest tran=(7944,0)
00/12/07 15:06:43.41 spid1 1 transactions rolled forward
00/12/07 15:06:43.49 spid1 Activating disk 'AM'
00/12/07 15:06:43.49 kernel initializing virtual device 1, D:MSSQLDATAAM.DAT
00/12/07 15:06:43.50 spid1 Activating disk 'AMLOG'
00/12/07 15:06:43.50 kernel initializing virtual device 2, D:MSSQLDATAAMLOG.DAT
The dbid is / was 6 for both the instances, the database which is having this dbid is database name "AM" and is having above 1300 tables (approx)
what could be the problem and solution for it?
kindly help me out of this situation.
If any more information is needed please contact me on devendrakulkarni@yahoo.com / devendra@me.iitb.ernet.in
Regards
Devendra
When I install the SQL Server 2005 SP2 on my vista laptop, I get the following message: SQL server setup failed to compile te Managed Object Format (MOF) file c:program filesmicrosoft SQL Server90sharedsqlmgmproviderxpsp2up.mof. To proceed, see "troubleshooting an installation of SQL Server 2005" or "how to: View SQL Server 2005...
What did I wrong?
Greets,
Wouter
why we use sql exceptions ...
what the program will do if we caught that exception .. i need some suggestions ... i got this exception(String or binary data would be truncated.
The statement has been terminated.).. will it affect the functionality of the program...
hiow can i avoid this exception..
Hi there,
I have Vista Ultimate and have installed IIS. I downloaded and installed - sucessfully - on a XP Pro (SP2) version, however when I try and install on Vista Ultimate, the installation wizard warns me that IIS is not installed, or running.
I am in the proccess of migrating to Vista and SQL server 2000 is not compatible with Vista. (or so the installation warns me).
I would prefer to use SQL Server 2000 as I know that the data import and export facilities work fine.
When I tried to import data from a remote server, I connected fine, but cannot see how to import a full database and tables to my local server. I need this for my web development as most of the sites I work on use MS SQL Server.
Any help with this will be greatly appreciated.
Thanks
Hans
current config: Windows XP SP1, SQL Server 2000trying to install : SP3a on SQL Server 20001. I downloaded the three files of the service pack from(http://www.microsoft.com/downloads/...&displaylang=en)..2. Saved the three files to a same local directory d:sqlsvr3a.3. Click through each and extracted them to same local directoryd:sql2ksp33. when I try to run the d:sql2ksp3setup.bat, it tells me thatx86setupsetupsql.exe is not found. Indeed, the file is not there inthe extracted folders.Is this a common problem, or am I missing something ?-thanks
View 1 Replies View RelatedI bought a new HP server with Windows 2003 SBS Premium.
I also was told buy the company how installed the server, that they installed all the components of SQL.
When another company came to install a new business software for us, they told me that the Integration services is not installed.
We tried together to install the SSIS with no luck.
When we run the Setup(or used Add/Remove software) we couldn't find the Integration services check box in the list of the setup.
I also asked assistans from the company that i bought the server fromk, and they also couldn't understand where is it.
We have an HP Proliant server, Windows server 2003 small business preminum SP1, SQL server 2005.
I was told that without the SSIS we can't start working with our new software, so this is very urgent for us.
I have been trying to install MSDE for a week. An appraisal program I need to set up uses it. I have been running changes and believe that I am close.
Section of setup log where it fails:
MSI (s) (28!C0) [13:16:30:812]: PROPERTY CHANGE: Adding SqlUpgradeProduct property. Its value is '{E09B48B5-E141-427A-AB0C-D3605127224A}'.
Failed to find available component set
MSI (s) (28!C0) [13:16:30:828]: PROPERTY CHANGE: Modifying SQLExitCode.2D02443E_7002_4C0B_ABC9_EAB2C064397B property. Its current value is '1603'. Its new value: '60007'.
Action ended 13:16:30: PickInstanceComponentSet.2D02443E_7002_4C0B_ABC9_E AB2C064397B. Return value 3.
I did not find anything different in a setup on a laptop that works. I'm unsure where to look.
will appreciate any help.
Thanks,
Jim
I installed VS 2005 without SQLExpress. Thereafter, I installed SQL 2005 (not express). Now, when trying to connect to a database server in server explorer, VS can't find any SQL servers and the dropdown box is empty in the Add Connection Wizard.
Also, I would like my WebApplication to run its membership services on the installed SQL - not the implicitly present SQLExpress (which is not present on my machine). How do I tell WebSite Administration Tool to use SQL not SQLExpress!!!!
Can I return a value in a variable from a SSIS program back to C# after the SSIS program is run from C#?
View 1 Replies View RelatedWe have a STD SQL2000 with 2GB memory, which has around 800 databases and is planed to have 1500 databases.
From Microsoft Knowledge Base Q316749, <<By using the -g startup parameter, you can instruct SQL Server to leave additional virtual memory available so that the combination of these log-related allocations and other normal allocations does not run out of virtual address space.>>
but we are not quite sure the correct sytax, so we added -g392 and -g 392 as two new startup parameters. After reboot, in the error log, "initdata: Warning: could not set working set size to 765696 KB.
1. Is this a good way to increase the virtural memory?
2. which system table contains the -g value? and how to fix this error?
thanks
-D
Please Advice
I started my SQL SERVER 2000 (SP 3)in single user mode using EM with the purpose of doing a test restore of the Master database. Can i remove the startup parameters as I cannot login using sa or similar login using ISQL/W utility.
Thanks for your help. Urgent.
Regards
Does anyone know how to tell which procedures are called when SQL Server 2000 starts up if scan for startup procs is turned on?
View 11 Replies View Related
in sql server (re)start where does it find the location of Master.mdf file .
In Oracle, there is control file where the location of *.dbf file is stored and Instance find the location of dbf file from that location
In sql server where it finds the location of Databases as master, msdb etc..
I have two pages on a particular website that are data driven by SqlExpress. The site is in the testing stages, so there is very traffic on the site at this point. The very first time that a data driven page is accessed, the response time is approximately 30 seconds. After that, the response on the data driven pages seems normal. The data queried is no more that 30 or 40 records.
I did see the "slow startup from idle" thread on this forum - that thread suggested changing from user instances, but that's not an option here.
My hosting service requires that I specify user instances in my connection string. Is this just something that I'm going to have to live with, or is there any way to speed up this SqlExpress "start up"?
I have two pages on a particular website that are data driven by SqlExpress. The site is in the testing stages, so there is very traffic on the site at this point. The very first time that a data driven page is accessed, the response time is approximately 30 seconds. After that, the response on the data driven pages seems normal. The data queried is no more that 30 or 40 records. My hosting service requires that I specify user instances in my connection string. Is this just something that I'm going to have to live with, or is there any way to speed up this SqlExpress "start up"?TIA
View 1 Replies View RelatedHello,
I've 10 Production Servers, which is rebooted every month by NT guys, The MS SQL Server Services & MS SQL Agent starts automatically when the Windows 2000 Advanced Server starts, I would like to create that when the MS SQL Server starts it pages me that Services started successfully, or the other way is to see the Windows Event viewer error logs to see if there is any SQL Server errors at NT server startup so that it would page me Problem starting MS SQL Server.
Would anyone please help me with this
Is there any startup procedure I could generate every time MS SQL Server is started.
How could I scan NT error logs to see the error logs for MS SQL Server and send the page.
Thanks
Roma
Running SQL2000/SP2. DB has approx. 750,000 rows in main table - 500 MB content. Db is set To Truncate on Checkpoint, so no Log file to speak of - ever. System is 667 Mhz PIII with 512 Mb Ram. Disk are ATA133.OS is W2k Server-SP3. Anonaly happens at System startup. Db is coupled with automatic data collection software for manufacturing. It is taking DB longer and longer to "catchup" after each boot. Pref Counters show main problem is Disk Read Queue Length. (CPU % doesn't exceed 40%, normally 7% - SQL was given 1/2 RAM - 256 MB). If Data Collection is not started, DB comes up rapidly (it seems), but manual test inserts show high - protracted disk activity, but tests don't fail, just run slow. After a number of test inserts (7 - 12+), log jam breaks and the processing time drops from 1.5 Minutes to the normal 15-20 Milliseconds!. Similar action is seen with Data collection software running at boot. By design, the Data collection software buffers all inputs to the DB, so no loss, but the disk thrashing is disconcerting. This type of problem is not seen during normal operation (system is closely watched by automated scripts). Main table is routinely reindexed and fragmentation is tracked (never gets above 5% fragmentation). No table is 'pinned' in RAM.
Hints, allegations, and out-right lies glady accepted!
Hi All,
Running Sql Server 2000 for Windows 98. How do I start the SQL Server Agent Automatically (that is at OS startup). Is there a way to do it at all ?
TIA.
Regards,
Kaushik.
Hello,
I've 10 Production Servers, which is rebooted every month by NT guys, The MS SQL Server Services & MS SQL Agent starts automatically when the Windows 2000 Advanced Server starts, I would like to create that when the MS SQL Server starts it pages me that Services started successfully, or the other way is to see the Windows Event viewer error logs to see if there is any SQL Server errors at NT server startup so that it would page me Problem starting MS SQL Server.
Would anyone please help me with this
Is there any startup procedure I could generate every time MS SQL Server is started.
How could I scan NT error logs to see the error logs for MS SQL Server and send the page.
Thanks
Roma
Hi, I'd like to create a trigger to fire it when database starts up. Is there any way to do it? If yes, would you be able to provide me with an example?
Thanks in advance.
-Alla
Is there a way I can set up a SQL script to run when the instancestarts up?SQL Server 2005 SP2thanks!
View 3 Replies View RelatedHi,
I am getting issue while Starting SQL Service.
Error started since I rebooted the server without stopping SQL Services.
Below Errors Observed.
1. Server named pipe provider failed to listen on [ sqlquery ]. Error: 0x57
2. TDSSNIClient initialization failed with error 0x57, status code 0x50.
3. TDSSNIClient initialization failed with error 0x57, status code 0x1.
4. Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
5. SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Kindly Suggest.
SSIS packages running slow on startup in 64 bit prod env. looks like it is taking lot of time (around 2mins) to validate the package. Delayvalidation is false (default); changing it to true didn't help. Any fix for it?
Executing packages using dtexec commad.
We have job packages which loads 10s of child packages in sequence using package execution task... taking hours to complete. Same are working fine 64 bit dev env.
Prod env:
Windows 2003 SP1
SQL Server 2005 SP2
Thanks
Is it possible to stop the server from going to sleep when it is idle to improve responsiveness to new connections?
View 21 Replies View RelatedI'm not familiar with SQL Server and am just starting things up. I have VB Express and SQL Server Express (I think - at this point, I wouldn't be surprised if I didn't), and am trying to create a database.
So how do I do that?
All I see that relates to the SQL Server 2005 is under All Programs -> Microsoft SQL Server 2005 -> Configuration Tools; I have a configuration manager, Error and Usage Reporting, and Surface Area Configuration. I assumed that in there would be a database engine in here somewhere, but I have rumaged through every command in these and found nothing on creating a new database. Nada.
Am I looking in the wrong places, did something go wrong with my install, or am I just a complete leptic?
Please Help!
The 6:th of march Sql server data tools for Visual Studio 2012 was released.
[URL]
I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).
why I'm getting this installation error.
I would like to enter info into the startup service account so that the MS
SQL Server Agent will run under this account. Then I can run jobs.
However, I don't know why the "startup service account" info is
greyed out, which prevents me from entering this information.
Any help would be appreciated!!
Hi,
Is there any way to use different email accounts for sql mail dynamically on sql server 2000?
Here is the problem:
My sql server is configured to start mail session under account 'xxnotifyxx'.
There are many jobs scheduled to run queries and send out emails to different user groups within the company as well as outside the company from 'xxnotifyxx' as a sender.
However, one of the usergroup within the company is asking for sending out their emails ( from scheduled tasks that uses xp_sendmail ) using 'publishergroup' as a sender.
As far as I know, this is not possible (sql server 2000, exchange 2000 client win2000 ) until I change the mail session configuration to start under 'publishergroup' in stead of 'xxnotifyxx'. If I do this, 9 other groups have problems with this.
Is there a work around for this kind of situation?
Thanks,
Shaili
:rolleyes:
Hi,
The SQL Service Manager is not running automatically despite that fact the the STartup type for the following service IS set to Automatic:
C:Program FilesMicrosoft SQL ServerMSSQLBinnsqlservr.exe -sMSSQLSERVER
When I start my PC and look at the taskbar (or is it better called the status bar), the service Manager appears with a big WHITE circle and when I get the tooltip it says:
"Unknown - \ - MSSQLServer"
Can someone please help me out.