Installation Settings
Jul 26, 2000Hi,
Can i check installation settings for SQL Server 6.5 ... like what sort order id. has been choosen etc. ? by any query ?
Thanks
ADVERTISEMENT
SQL Tools :: SSDT For VS2012 Installation Fails With (Same Architecture Installation) Error
Mar 9, 2013The 6:th of march Sql server data tools for Visual Studio 2012 was released.
[URL]
I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).
why I'm getting this installation error.
Error Installing SQL Server2000: A Previous Program Installation Created Pending File Operations On The Installation Machine
Oct 2, 2005I am trying to install SQL Server 2000 on a Win2K OS machine but Iget this error message:"A previous program installation created pending file operations onthe installation machine. You must restart the computer before runningsetup."I see others have had this problem but have fixed it using the solutionin:http://support.microsoft.com/defaul...kb;en-us;312995I have tried the solution but to no avail. The registry key:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lSessionManagerPendingFileRenameOperations keeps reappearing as soon as Iclose RegEdit.Any ideas?Thanks,lq
View 3 Replies View RelatedMSDE Installation Fails Due To Detection Of Previous Installation
Jul 23, 2005Please help,I am trying to install MSDE 2000 so that Backup exec will run on thisserver. I have gotten so far as to find an entry in my SQLSTP.TXT filethat says that c:mssql7 was detected so the install fails.Now, to start with there is no directory called C:mssql7 on thisserver. I have gone through all MS articles on manual removal of SQLserver and instances. I have searched the registry for mssql7 andremoved any keys that matched, as per MS article I have searched onSQLBOOT.dll and it is not present anywhere on my system and I still getthe same results.2:07:44 Begin Action: Detection12:07:44 SQL Server version already installed: 7.00.62312:07:44 Previous Install SQL Path: C:MSSQL712:07:44 Previous Install SQL Data Path: C:MSSQL712:07:44 End Action Detection12:07:44 Begin Action: ODBCLocked12:07:44 End Action ODBCLocked12:07:44 GetDefinition returned: 112:07:44 Previous SQL Server ProductType: MSDE [0x4]12:07:44 This combination of Package and Operating System allows a fullproduct install.can anyone think of anything here..what else could be causing the server to think there is a previousversion of SQL 7 on this box!!!?
View 1 Replies View RelatedExpress Installation Fails With Invalid Installation Package
May 3, 2006I get an error when trying to install the SQL Native Client. It
says it cannot find the installation package and to use a valid copy of
'sqlncli.msi'. I've downloaded the Express setup twice and get
the same error from both of them.
I'm attempting this in a VMWare session setup for Windows 2K, Advanced
Server. I am trying to test my installation and setup
procedures. This is not a production setup, just install testing
and documentation. I have allocated only 272MB to the VMWare
session, which is why the system doesn't meet the recommended settings.
Any help would be greatly appreciated.
Below is the Summary.txt output file.
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows 2000 Advanced Server Service Pack 4 (Build 2195)
Time : Wed May 03 09:54:23 2006
CPCWIN2KVM1 : The current system does not meet recommended hardware
requirements for this SQL Server release. For detailed hardware
requirements, see the readme file or SQL Server Books Online.
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.2047.00
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : SQL Native Client
Error : An
installation package for the product Microsoft SQL Server Native Client
cannot be found. Try the installation again using a valid copy of the
installation package 'sqlncli.msi'.
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Failed
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLNCLI_1.log
Last Action : InstallFinalize
Error String : An installation package for the
product Microsoft SQL Server Native Client cannot be found. Try the
installation again using a valid copy of the installation package
'sqlncli.msi'.
Error Number : 1706
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.2047.00
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_MSXML6_1.log
--------------------------------------------------------------------------------
NT Settings For SQL 7.0
Feb 24, 2000View 1 Replies View Related
Awe Settings
May 6, 2002I am running AWE on SQL 2000 (the server has 8 gig of RAM). I have the SQL Server set to use a max of 6 gig. The server hung unexpectedly (SQL showed no errors or signs). Has anyone had any problems with using AWE, and or any suggestions or changes I might need to do?
Thanks
Collation Settings
Jul 16, 2002New SQL2000 installation into which I've copied data from multiple SQL7 installations. Some of the databases I've copied over from a SQL7 server with code page 850, sort order/collation 42, using the detach-copy mdf/ldf-attach procedure outlined elsewhere on this site (thank you). Other databases have been DTS'd from another SQL7 server with code page 850, sort order/collation 44.
In the end I want all databases to be in the default Latin1_General_CI_AI collation I've chosen for my installation.
I'm off to immerse myself in collation papers and alter database documentation from BOL, but was hoping someone could enlighten me in a less painful way.
Thanks,
Al
Regoinal Settings
Mar 27, 2008Hi all
I've got a problem with an American software vendor, who's asked me to check and adjust the regional settings within SQL Express 2005, installed on an XP SP2 pc
I'm scanning meta data into this database
If I enter a date field with a UK date format, I get an error in the SQL logs
If I enter a date field with a US date format, everything is fine
The XP box is setup with all UK region settings
I've been told that my SQL install should automatically use the region settings from whatever OS that it's installed on
I've checked everywhere within SQL, and it all looks to be setup with UK region settings
I suggested to the software vendor that the problem lies with their software
Can anyone suggest if I've missed anything, or where I should be checking my region settings within SQL?
Kind Regards
Tonasis
Database Settings
Apr 14, 2008
From the sql server management studio i cannot see database properties
logical file name of mdf, location of the mdf
logical file name of ldf, location of the ldf
what setup should i change to see the properties.
SQL SERVER SETTINGS
Sep 9, 2006
When SQL Server and Web site are both on same machine,
it runs fine, can get data and display in web page.
but when trying to get data from remote SQL Server, it gives error.
What's the setting for SQL server configure and security settings
in different versions?
MS SQL 2000 | MS SQL 2005
==============================================
Framework 1.x ? | ?
Framework 2.0 ? | ?
Thanks alot.
Please provide some setting help for the ?
Default Rs Settings
Jun 26, 2007is there a simple manual how to setup RS.
with the administrators group im able to view my reports. but normal users are not able to view anything. they can enter reporting services, but not open a report.
SQL Configuration Settings Being Ignored?
Sep 13, 2006I am sure I'm being blind here (it wouldn't be the first time - and won't be the last time).
I have a package that retrieves some values from SQL table to allow me to dynically create an email message, so it retrieves To Addresses, From Address, Header, Body from a table, populates variables, and uses expressions to assign those to the SEND MAIL TASK.
That is working (after a bit of head/wall/banging to get my default virtual SMTP server running locally).
Now I am trying to make the SMTP Server Name dynamic. The Property SMTPConnection specifies the SMTP Connection Manager to use, and not the server, so it doesn't seem as though I can configure a property on the SEND MAIL TASK to achieve this.
Now I'm focussing on using SQL Package Configurations to try and drive this. As I see it, just like XML configurations, if you change a value in the configuration source, then when the package runs, it get's that value, and uses it.
I have change the configuration value (outside of the package). I confirm it is actually changed by running a SQL Task that gets the value from the configuration table, and view the value assigned to the variable in watches. The value returned is a different value (in my case I changed it to an invalid servername), and yet the task still runs through successfully, using the previous SMTP servername.
huh?
SQL 8 Password Settings
Sep 29, 2006I wanted to know if there is a way to enforce security settings on SQL 8 Server. Specifically password lengths, expiration,e tc. These servers run on a Windows Platform, so if it is not possible to enforce passwords at the database level can the windows passwords parameters be enforced for the server.
Also, how would I be able to find the last changes made to the tables within the database.
Site Settings
Oct 16, 2006
I need to place some site settings in my Report Manger.But in my Report Manager there is no Site Settings Icon.Is this installation problem please help me.
SQl Server 2005 Installation Is Depend On Installation Of Visual Studio 2005?
Oct 2, 2006Hi every one,
I'd like to install SQL SERVER 2005 Express Edition ,I begin to install it from DVD but during the installation it dosn't ask me about any instance and after installation there isn't SQLExpress service and I can't use sql server .(there are not MSSQL and Binn directory in sql server 2005) but when I install visual studio 2005 and after that I install sql server 2005 it ask me for name of instance and with this way every thing is ok and I use sql server completely.
I 'd like to know the complete installation of sql server 2005 is depend on installation of visual studio 2005 befor it ?if not how can I introduce any instance after installation of sel server 2005 .
Where And How Can Timeout Settings Be Changed
Nov 6, 2006I have a page that uses an SQLDataSource web control to populate a GridView control. The SQLDataSource control uses three parameters, one of which is a text string (varchar(50)). I get timeout expired exceptions when I run the page with two specific string values, yet when I run the stored procedure in SqlSvr Management Studio, the procedure runs in 5 seconds and under 1 seconds. Being rnew to ASP.NET 2.0 and .Net in general, I have no idea where this lag is occurring. I would like to know two things:
1. What is causing the lag that causes the timeout in ASP.NET 2.0.
2. What can be done to adjust the timeout period SQLSVR, IIS, ASP.NET).
The underlying query is running as desired (considering the data it has to chew on). For all other values, data is returned almost instantanious. I can provide a copy of the query id need be.
Truly appreciate any insight you can give me!
Incorrect Settings Arithabort
Dec 3, 2007INSERT [DELETE] failed because the following SET options have incorrect settings: 'ARITHABORT'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods.
On local dev machine with SQL Express DB everything works fine. Once moved to shared hosting environment (with adjustments to web.config), insert and delete stored procedures produce the above error.
Made sure that stored procedures SET ARITHABORT ON at the beginning and OFF at the end, without success. Even SET ARITHABORT ON at DB level without success.
Suggestions appreciated
SQl Server Connection Settings
Dec 11, 2003Hi all,
I am a newbie to .NET and MS SQL server. I am trying to connect to sql server d/b from my application files.
How should i open a connection from my system pc5 (where application/proj being developed) to SQL serevr which is installed on my server(server1). Both are in network.
I have installed sql client on my system(pc5) and created my d/b (MyDB) thru EM, now how can i create username & password for MyDB datbase.
I had installed ASP.NET Commerce server(from ASP.NEt site) on my system pc5 its working fine with accessing Commerce d/b from server1. I observed the string in web.config file of commerce application it is as follows.
<add key="ConnectionString" value="server=server1;database=Commerce;uid=CommerceUser;pwd=CommerceUser;" />
In the same way can i create Username and passsword for MyDB database, if so how should i do that. that should look like some thing like this..
<add key="ConnectionString" value="server=server1;database=MyDB;uid=MyDBUser;pwd=MyDBpass;" />
to do in this way i need to create username and pw for MyDB . How should i create username ansd pw for MYDB datase.
Pls help me out.
Thanks in adv
Kumar
Changing ConnectionString Settings
Jun 5, 2006Hello all. I created an app locally with VWD Express and moved it to to our server but I am getting the following error...
An attempt to attach an auto-named database for file D:WebApp_DataSurvey.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
This is the connectionstring from the web.config file used on the server. I did not change anything from the local copy.
<connectionStrings>
<add name="SurveyConnectionString1" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Survey.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
What settings do I need to change in order for this to work? Any advice is appreciated. Thanks.
Changing Language Settings
Jan 23, 2004Hi,
I was wondering how to change the language settings on SQL Server. The server is currently set to US English, and I was wondering how it is possible to change it to UK English. The Server Regional Settings are set to UK English.
Also, on a semi-related topic, does SQL Server store dates in a universal format, and then when data is requested does it 'translate' these dates into the format required by that particular regional setting?
Thank you for any input
Marman
How To Change Search Settings
May 12, 2014Using the Agentpress theme I have put together a client site that is fully functional, however the client has asked that the search query is altered slightly and i'm having trouble working out how to do it.Basically they want the search facility provide the following options:
1. Bedrooms searched for as 1+, 2+, 3+ and 4 or more.
2. Property availability to provide just 2 options - Available and Include Let Properties.
how to change the search settings to return this information.
Changing The Language Settings
Apr 5, 2006Hi all,
I need to change the Language Settings from my query analyser. Is it Possible???
If so, how ??
Thanks in advance
Regards,
satish.r
"Known is a drop, Unknown is an Ocean"
Xp Pro Settings To Work With Replication
Dec 23, 2006hi guys :( ive searched on all the topics here about replication. but now i am wondering what windows xp settings do i have to edit? i read something about dcom settings and changing permissions. what is the RIGHT way to share a file or whatever because the schema cannot be accessed for some reason. i need a whole list of things to do because things are not working out after i read the tutorials on other sites. please someone help me.
basically i need to have two servers that need to be replicating each other. i realized that the instances have to be named so i am just totally confused. ill even let anyone connect remotely to help me out if they want. or explaining will do fine. please! thanks guys!
happy holidays!
Management Studio - Settings
Jan 15, 2008Hi All - sorry for dumb question.
I changed a log-file growth from 10% to 10MB in November. Then had to do the same again today.
Is there anyway it could have (somehow) changed-back by itself?
International Settings For SQL 2000
Feb 26, 2006I will doing an installation of MS SQL 2000 that will be used by multilanguage web sites.The languages are Japanese, German and of course English.Currently I'm planning to install MS SQL 2000 standard version butafter reading some articles I'm considering the Enterprise version.Can someone shed some light on the advantages of using Enterprise vsStandard strictly from a language support perspective?Also, is there any caveats or other considerations that I should keepin mind to make sure that the developers have all they need to developthese multi language sites?Thanks in advance.
View 1 Replies View RelatedSetting Up A Settings Table
May 10, 2006I am creating an image gallery system, where there is an admin andmultiple users upload images. Each user is restricted to uploading 8images. Currently, I have this hard coded into a trigger. I wouldlike it to use a table field instead... one that the admin can changeon the fly. I want to call this table Settings, but I want to createinsert 1 record, and then block all subsequent INSERT statements(there's only going to be 1 setting) so that the Settings table willonly have 1 record in it for its entire lifetime. What's the best wayto do this?
View 2 Replies View RelatedAre Transactional Settings Used Only During Updates?
Jul 20, 2005Hi,In the Web application I am working on, data is read from a SQL Serverdatabase. At any time, there are about 15 people browsing the web.The SQL Server database is updated with new information once everyhour. The update takes a couple of minutes. The isolation level duringthe update is so to Serialazable so that the front-end does not getany incorrect data.Now, here is my problem. When the web page is being loaded, the serverside ASP.NET code uses several SELECT statements at multiple places.For various design reasons, these SELECT statements cannot be combinedinto a single statement. As a result, it may happen that during thepage load, we get some data before an update and some data after anupdate.I am wondering if I must used a transactional lock even for the Webapplication although technically it is not updating the database.Also, after playing with various transactional settings, I noticed thefollowing behavior for the readers when a writer enters a transaction:1. If the reader app has not yet executed the query, the call to queryexecution blocks until the writer has done its job.2. If the reader app has already begun executing the query, the callis not blocked and SQL Server provides the needed isolation.I do not wish to block the readers while the update is going on.Ideally, I would like it to be such that even if the writer isupdating, the readers must continue to get the old data, that is,until the writer commits the update. However, I did not find anyisolation settings that would let me achieve this non-blockingbehavior. Am I missing something?Thank you in advance for enlightening me.Pradeep
View 1 Replies View RelatedSettings Up A Connection With ODBC
May 25, 2007ok im trying to set up an odbc connection to my database.
i am using MS SQL SERVER 2005 Express on my labtop that is running windows xp.
on the labtop i went into control panel - admin tools - data sources (odbc) and then under the user dns tab i added a sql server with these values in the fields
name: MyFoxData
Description: [i left empty]
Server: TESTINGSQLEXPRESS
then i hit next
then i have checked With Sql Server authentication using a login id and password entered by users.
i enter in my login id and password.
i then uncheck connect to sql server to obtain default settings.
i hit next and change default database to DNN445
and i leave everything else the way it is, before i save it i test the connection and it works fine.
I do the same exact steps on my desktop to try and connect to the SQL database on the labtop but for some reason i keep getting this message
Microsoft SQL Server ODBC Driver Version 03.85.1117
Running connectivity tests...
Attempting connection
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Specified SQL server not found.
TESTS FAILED!
any ideas?
TCP/IP Settings In SQL Server 2005
Mar 17, 2008I recently installed SQL Server on a machine running Windows Server 2003. Before it was on my desktop. When I checked the TCP/IP settings under configuration manager, I noticed it doesnt have anything for my IP address. I just have a entry for the 127.0.01 loopback address. I know when I had it installed on my desktop there was a entry for my IP address. Is this ok or did something go wrong and it didnt set the IP address? I can still login and access the databases fine from Managament Studio.
Also would it better to have the services run as a network service or a local service?
How To Change The Language Settings Of An Rdl
Sep 6, 2007
Hi,
Can we change the language settings for a report by modifying the rdl code?
For example:- If my report is in English US, how do I change it to English UK?
Thanks in advance
Settings For Printing Reports
Sep 26, 2006Hi....We are generating reports in Excel and PDF and the reports are accessed from a web app interface..
the problem is that when the users print a report generated in Excel from the web app it prints in a veritcal split on paper...This is because the width exceeds the paper width....We do not want to redesign reports ...Is there any method to squeeze Excel data into the availiable page width ( This happens automatically in PDF so issues with it).....Can it be done in code ?
Windows Application Log Settings
Jan 16, 2008Is there a way to control some of the windows application log settings from within the logging process of a package. Specifically the 'source' parameter which comes out as 'SQLISPackage' which i'd like to be the actual name of the package which wrote to the log, and similarly 'Category' which comes out as 'none' and I'd prefer to assign something more meaniful ?
THX