Install on 2003 Server R2 x64 I get this warning and need to now how to fix this:
- ASP.Net Version Registration Requirement (Warning)
Messages
ASP.Net Version Registration Requirement
64-bit ASP.Net is Registered. Required 32-bit ASP.Net to install Microsoft Reporting Services 2005(32-bit).
Can the 32-bit version co-exist with the 64-bit version APS.Net?
Hello everyone. I'm installing SQL 2005 on Windows Server 2008. During the first leg of the installation, I get green checks on all items except for "ASP.net version Registration requirement". My error message says" Failed to find ASP.Net Registration with Microsoft (IIS). I've run the aspnet_regiis program, but it didn't seem to do anything. Is there a certain switch I need to use with the the aspnet_regiis command? It appears that the ASP.Net registration is hindering me from installing the reporting services component in SQL, which I need to install CRM4.0. So, if anyone knows how to help me do this ASP.NET registration on a Windows Server 2008 server, I would be very grateful.
Thanks
I am trying to install SQL Server 2005 Standard Edition in parallel with SQL Server 2000. The server is a Dell 2650 with 1 GB RAM running Windows 2000 Server.
The initial part of the setup runs the System Configuration Checker (SCC), which is generating this warning:
Default Installation Path Permission Requirement (Warning)
The server is a member of a domain, but I am logged in as the local administrator. The drive is not compressed. There are no file system problems. I am at a loss as to why this warning is occuring, and do not want to proceed until I figure this out.
(I got this warning on another server as well. That was a test server, so I proceeded. The engine seems to run ok, but SSIS will not load, says a component is missing. Not sure if the two issues are related or not).
Any ideas?
Thanks,
Mike
Hello everybody,
I have question ablout the installing SQL Server 2005 in the windows XP profesional, I always install sql server on my machine with the Windows XP professional edition as usual without any problem but now
I have a strange problem, first on the System configuration stepeverything is OK except €œSQL Server Edition Operating System Compatibility (Warning) €œ ,with this message :
- SQL Server Edition Operating System Compatibility (Warning)
Messages
·SQL Server Edition Operating System Compatibility
·Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Meanwhile the main problem is in the €œ Component to install €? window as I don€™t see these serises of component checkbox enable! Except the €œWorlstation component, books online and development tool €œ,
sql server database services -->disable
anlysis services -->disable
reporting services -->disable
notification services -->disable
integration services -->disable
Worlstation component, books online and development tool -->enable
And after that I make sure about the serious problem and then I decide to continuing installation with clicking on the enable check box and then I have an instance of SQL Server on my machine but it isn€™t compelete .
I tried to solving my problem with unistalling the SQL Server and reinstalling the this software again but this problem still exist, and then I decide to change my window and reinstalling this again , I do that but
It is not work out!!
Therfor if it possible for you please help me to solving my problem, thank you very much
I've tried to installed sql server 2005 developer edition on windows vista home premium but failed many times, almost giving up.
I've installed and turned on all the features of IIS 7.0 but it still failed and I tried to test IIS 7 by running the local host and received this error " HTTP Error 500.0 - Internal Server Error."
I even ran the windows update SP1 for Vista and MDAC 2.8 SP1
I really appreciate any comments and help.
-----
Here are the messages in the windows system check for the sql server 2005 installation:
IIS Feature Requirement (Warning)
Messages
€¢ IIS Feature Requirement
Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
I've tried to installed sql server 2005 developer edition on windows vista home premium but failed many times, almost giving up.
I've installed and turned on all the features of IIS 7.0 but it still failed and I tried to test IIS 7 by running the local host and received this error " HTTP Error 500.0 - Internal Server Error."
I even ran the windows update SP1 for Vista and MDAC 2.8 SP1
I really appreciate any comments and help.
-----
Here are the messages in the windows system check for the sql server 2005 installation:
IIS Feature Requirement (Warning)
Messages
€¢ IIS Feature Requirement
Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
The 6:th of march Sql server data tools for Visual Studio 2012 was released.
[URL]
I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).
why I'm getting this installation error.
I am trying to install SQL Server 2000 on a Win2K OS machine but Iget this error message:"A previous program installation created pending file operations onthe installation machine. You must restart the computer before runningsetup."I see others have had this problem but have fixed it using the solutionin:http://support.microsoft.com/defaul...kb;en-us;312995I have tried the solution but to no avail. The registry key:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lSessionManagerPendingFileRenameOperations keeps reappearing as soon as Iclose RegEdit.Any ideas?Thanks,lq
View 3 Replies View RelatedPlease help,I am trying to install MSDE 2000 so that Backup exec will run on thisserver. I have gotten so far as to find an entry in my SQLSTP.TXT filethat says that c:mssql7 was detected so the install fails.Now, to start with there is no directory called C:mssql7 on thisserver. I have gone through all MS articles on manual removal of SQLserver and instances. I have searched the registry for mssql7 andremoved any keys that matched, as per MS article I have searched onSQLBOOT.dll and it is not present anywhere on my system and I still getthe same results.2:07:44 Begin Action: Detection12:07:44 SQL Server version already installed: 7.00.62312:07:44 Previous Install SQL Path: C:MSSQL712:07:44 Previous Install SQL Data Path: C:MSSQL712:07:44 End Action Detection12:07:44 Begin Action: ODBCLocked12:07:44 End Action ODBCLocked12:07:44 GetDefinition returned: 112:07:44 Previous SQL Server ProductType: MSDE [0x4]12:07:44 This combination of Package and Operating System allows a fullproduct install.can anyone think of anything here..what else could be causing the server to think there is a previousversion of SQL 7 on this box!!!?
View 1 Replies View RelatedI get an error when trying to install the SQL Native Client. It
says it cannot find the installation package and to use a valid copy of
'sqlncli.msi'. I've downloaded the Express setup twice and get
the same error from both of them.
I'm attempting this in a VMWare session setup for Windows 2K, Advanced
Server. I am trying to test my installation and setup
procedures. This is not a production setup, just install testing
and documentation. I have allocated only 272MB to the VMWare
session, which is why the system doesn't meet the recommended settings.
Any help would be greatly appreciated.
Below is the Summary.txt output file.
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows 2000 Advanced Server Service Pack 4 (Build 2195)
Time : Wed May 03 09:54:23 2006
CPCWIN2KVM1 : The current system does not meet recommended hardware
requirements for this SQL Server release. For detailed hardware
requirements, see the readme file or SQL Server Books Online.
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.2047.00
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : SQL Native Client
Error : An
installation package for the product Microsoft SQL Server Native Client
cannot be found. Try the installation again using a valid copy of the
installation package 'sqlncli.msi'.
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Failed
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLNCLI_1.log
Last Action : InstallFinalize
Error String : An installation package for the
product Microsoft SQL Server Native Client cannot be found. Try the
installation again using a valid copy of the installation package
'sqlncli.msi'.
Error Number : 1706
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.2047.00
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_MSXML6_1.log
--------------------------------------------------------------------------------
Whats the cause for this warning, after I query a sqlserver 7 table,
'warning: Null value eliminated from aggregate' ?
Thanks,
Scott
I keep getting this warning, any ideas on how to fix this? Thank you.
View 1 Replies View RelatedHello,
I am getting the following warning message in the event viewer. I have only one schedule in sql. there is no other schedules in task scheduler or database management.
Event Type:Warning
Event Source:SQLSERVERAGENT
Event Category:Job Engine
Event ID:208
Description:
SQL Server Scheduled Job 'Transaction Log Backup Job for DB Maintenance Plan 'DB Maintenance Plan1'' (0xD25A4CDDD1C59E48B4D28F61F0A411B8) - Status: Failed - Invoked on: 2004-08-16 02:30:00 - Message: The job failed. The Job was invoked by Schedule 2 (Schedule 1). The last step to run was step 1 (Step 1).
Kindly give the suggestions at earliest.
Hey guys....I have a quick question. I am having a problem with a certain app which connects to my SQL 2000 SP3a Database. It only occurs when I have a ^ in the password, both using SQL and NT authentication.
I have checked on MSDN and they do not list that character as one to avoid. I did find in the books online documentation that the ^ performs a bitwise exclusive OR operation....has anyone tested using ^ as part of a password to authenticate to a SQL db?
I typed the following query
ALTER TABLE [konnik].[PORTAL_CONFIG]
ADD CONSTRAINT [DF_PORTAL_CONFIG_AUTOPM_ON]
DEFAULT (1) FOR [AUTOPM_ON]
and i received the following warning
Warning: The table 'PORTAL_CONFIG' has been created but its maximum row size (12068) exceeds the maximum number of bytes per row (8060). INSERT or UPDATE of a row in this table will fail if the resulting row length exceeds 8060 bytes.
Bear in mind that this table come from Access through the Dts. Could anyone translate this for me? How can i overcome this???
hi all..
i have this error and fail to resolve it :-
Warning: Null value is eliminated by an aggregate or other SET operation.
what does that means? my code :-
SELECT
@BookQtyIN = ISNULL(SUM(x.pickqty), 0),
@PickQtyIN = CASE WHEN ISNULL(SUM(x.pickqty), 0) >0 THEN
ISNULL(SUM(d.PickQty), 0) - ISNULL(SUM(x.pickqty), 0)
ELSE ISNULL(SUM(d.PickQty), 0)END,
FROMtblItemDetail d
LEFT JOIN (SELECT p.PickQty AS PickQty,
j.PickComplete AS PickComplete,
p.ItemStorageID AS ItemStorageID
FROM tblItempicked p
LEFT JOIn tblJobDocuments j
ON j.Docrefid=p.Docrefid AND j.JobID=p.JobID
WHERE j.PickComplete='N'
)AS x ON x.ItemStorageID=d.ItemStorageID
WHERE d.ItemID = @ItemID
AND d.Ownership = @ClientID
AND d.CustomLotNo = @CustomLotNo
If you have a package that uses an environment variable for an indirect configuration and the environment variable is not present when the package runs you get the following warning:
The configuration environment variable was not found. The environment variable was: "Seer.ConnectionManager.CUECommonReference". This occurs when a package specifies an environment variable for a configuration setting but it cannot be found. Check the configurations collection in the package and verify that the specified environment variable is available and valid.
IMO, if the package is expecting to find something and cannot find it then it should cause an error, not a warning. I'm happy for people to disagree tho :)
Any comments???
-Jamie
Hello,
I'm having a problem with one of my packages due to a truncation warning that I can't get rid of. It's not the end of the world, because the package still works. It's just extremely frustrating.
The problem arises in a derived column item in a data flow task. There is a postcode field in the data flow which has space for 20 characters. I create a derived column from this which simply removes any spaces:
Derived Column Name: Postcode
Derived Column: Replace 'Postcode'
Expression: REPLACE(" ",Postcode,"")
Data Type: string [DT_STR]
Length: 20
Code Page: 1252 (ANSI - Latin I)
However when I use this expression, or anything else which uses the replace function, I end up with the warning message:
Warning 1 Validation warning. Create Staging Tables: Derived Column [20555]: The result string for expression "REPLACE(" ",Postcode,"")" may be truncated if it exceeds the maximum length of 4000 characters. The expression could have a result value that exceeds the maximum size of a DT_WSTR.
I have tried everything I can think of to get rid of the warning. Is there some way I can use the replace function, but not have the system convinced that I'm about to go over the maximum size limit?
Many thanks
Can some one please help.
Lately I am getting an error:
LAZY WRITER WARNING: LRU List is Empty
Than the system locks!
can anyone help. This is driving us crazy.
There is no reference in the KB. We are trying to insert records into a table by a SP.
Thanks,
John
I'm running SQL Server 6.5, with the latest Service pack on NT 4.0 with SP4. A couple of days ago I started getting a warning message in my event log right after a scheduled task ran. The scheduled task calls three stored procedures (data dumps for master, msdb, and a production database) it also runs a consistency check on each before dumping them. I can interactively run each stored procedure and get NO error messages. Prior to getting the warning message (which occurs after the scheduled task runs) I get normal informational entries that the dumps occurred without a problem and the files are written to the proper area. The error is in the Task Engine category and are Warning type messages. Here is the text:
SQL Server Scheduled Task: 27, 'Proddata Dump' -- Status: Failed
-- Task Invoked on: 5/20/99 5:00:00 AM -- Message: Database 'ASSMTCTRPROD' (116647 pages) dumped to file <1> on device 'D:DATDUMPASSMTCTRPROD_990520_DATA.DMP'. (Message 4035)
Any help that anyone could give would be greatly appreciated. Thanks
Hi
I'm getting a strange sql server agent warning in my server's event log (not in the sql server log). Its occurring after each agent job runs and says:
"Unable to determine if the owner (sa) of job Trans Backup has server access (reason: Unable to connect to server - check SQL Server and SQL Agent errorlogs)."
I have checked the errorlogs - nothing.
My job completes OK, but I get this warning.
I'm running SQL Server 2000 SP2.
I'm running in a cluster.
The problem has only occurred since a reboot yesterday.
Any Ideas?
Thanks in advance.
Andy
Hi All,
I've recently restored one of my development databases from it's production backup. The restore completed successfully, users were able to connect to the database without any problems. However, when I checked the error log I found the following message:
Bypassing recovery for database 'Test' because it is marked IN LOAD.
I could not find anything on the web or in BOL. Any ideas?
Thanks.
Hi all,
Sql server 7.
Under event viewer->application log i am getting the below error continously. Pls help
Regards,Event Type: Warning
Event Source: SQLServerAgent$abc
Event Category: Printers
Event ID: 208
Date: 2/9/2004
Time: 9:23:03 PM
User: N/A
Computer: abc1
Description:
The description for Event ID ( 208 ) in Source ( SQLServerAgent$abc ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: SQL Check, 0xAF04DFE7917DEA489F33D8A38E8A0793, Failed, 2/9/2004 9:23:00 PM, The job failed. The Job was invoked by Schedule 31 (6.x schedule). The last step to run was step 1 (Step 1)..
Waiting for ur reply
TIA
aadil
I use VB 6.0 with ADO 2.6 to access an SQL-server.
I know that the table I wish to create generates this warning.
But from today ( without any changes to the SQL-server ) , this warning is reported as an error to the client instead of continuing.
So my error trap routine traps this as an error now.
I have a workaround that I would to avoid and that's reinstalling the SQL-server ( Only the MSSQL ).
Does anybody know a better solution.
PS : Changing the table structure is not possible in this case.
Thnx in advance,
Sven Peeters
Belgium
Hello there
I installed sql server 2005 developer edition
and the only error message i got was.
- IIS Feature Requirement (Warning)
Messages
IIS Feature Requirement
Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
how do i get hold of Internet Information Services
I installed it on vista premium.
Please help
Regards
ROB
While intalling SQL 2005 on an x64 machine, I got an error message that warned that some functions of SQL would not install unless IIS was installed (and enabled) on the machine. It did not say what would not install, but I gather it is Reporting Services. I don't recall getting these warnings in previous (32 bit) installations of SQL 2005.
On the other hand, when I go into the BI Intelligence Studio on
a (32 bit) server that does not have IIS, I seem to be able to create
a report anyway (Not really my area of expertise ). Does that mean that Report Services is working without IIS?
Hi,I have a few create table statements which create temporary tablesthat has row definitions which exceeds the 8060 size limit, this causesa warning message being generated (Message 1708).Is there a way I can disable/avoid the warning message from beingprinted ?Thanks,joe
View 2 Replies View RelatedAwhile back there was some discussion about ways of sending multiplerows of data to SQL Server. The ADO .UpdateBatch method was one ofthe possibilities mentioned, and Erland said he thought that probablyonce the data get to SQL Server they are probably actually insertedone row at a time. I just want to say that based on an experience Ihad a couple of days ago I am now sure that is the case. I was using..UpdateBatch for something quick and dirty I had to do just once andwas too lazy to use XML for. An error was generated during the..UpdateBatch process because of invalid data in one row. However, alarge number of the rows in the batch WERE written to the database.Until now I haven't used .UpdateBatch in a production environment onlybecause this implies granting INSERT or UPDATE privileges to the user.But based on this experience I would NEVER use .UpdateBatch in aproduction environment, even for a user like a batch job where thepermissions would not be an issue.FWIW.
View 11 Replies View RelatedHello All,
I have an SSIS package which uses a third party RMS driver. It is not licensed and so it throws a warning messagebox when the package is run and every time the connection is used. Is there a way to suppress these messages so that the package can be scheduled and run without user interaction?
Thanks
Arun
I don€™t know if this is the case but I need some help. We have itanium server with Microsoft SQL Server 2005 - 9.00.3054.00 (Intel IA-64) Mar 23 2007 18:42:19 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2).
We has had lot of problem with that the sqlserver.exe process hangs 100% cpu. It€™s totally non responsive I€™m not even able to contact the server with DAC. The general solution has been just kill the process. Not nice.
https://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=440746&SiteID=17
The log is full of those
Date,Source,Severity,Message
08/16/2007 09:00:38,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/16/2007 08:55:17,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/15/2007 13:06:09,spid4s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/14/2007 10:07:08,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/09/2007 11:07:29,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/06/2007 09:41:13,spid2s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/06/2007 09:14:50,spid2s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/06/2007 08:54:38,spid2s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/06/2007 08:24:59,spid2s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/03/2007 11:09:54,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/01/2007 12:30:56,spid2s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/31/2007 10:16:45,spid2s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/30/2007 10:44:22,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/24/2007 01:03:36,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/23/2007 01:02:33,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/16/2007 12:27:52,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/16/2007 12:25:12,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/16/2007 11:54:07,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/16/2007 11:44:16,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/14/2007 01:04:15,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/12/2007 06:18:51,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/12/2007 06:06:49,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/10/2007 13:20:08,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/10/2007 13:10:43,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/09/2007 10:36:27,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/09/2007 10:28:46,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/06/2007 10:12:20,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/06/2007 10:09:39,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/06/2007 10:06:19,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/06/2007 10:01:28,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/06/2007 01:17:08,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/06/2007 01:13:47,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/04/2007 10:41:06,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/03/2007 10:24:24,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/03/2007 01:22:44,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
06/28/2007 01:03:03,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
LazyWriter: warning, no free buffers found.
We used to solution to set a fixed as told in the post above and after that the problem went away. At least for the last 4 days.
Is this LazyWriter not fixed in SP2 for itanium or what?
All,
I am able to "CREATE ASSEMBLY" for the stdole.dll without issue, however, I receive the warning:
Warning: Assembly "stdole" was built using version v1.0.3705 of the
.NET Framework. SQL Server currently uses version v2.0.50727.
(Microsoft SQL Server, Error: 6215)
I am unable to find a PIA for stdole that is .NET 2.0. Has anyone resolved this warning? Can I create a 2.0 PIA myself without causing other problems?
Thanks in advance for your thoughts.
Hi,
when using lookup i am geting the following warning.our OLEDB connection is Oracle.how to resolve this will this have any performance impact.
[Lookup [14342]] Warning: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
Thanks
Jegan
Hi!
I'm running dtexec with the /WarnAsErrors flag, to be sure to detect any configuration warning (configuration errors are actually throwed as warning, which is not sufficient) or any other important warning.
I only get one warning (0x80047076, optimisation warning). Is there a way to disable this specific warning ?
thanks
Thibaut