Hi,
I've been trying to follow Microsoft's instructions on installing MSDE2000 for Visual Studio. I do instancename=VSDOTNET SECURITY=SQL SAPWD=XXXX and all that. When I reboot, I notice that I have no services in the SQL Service Manager, nor can it find my computername.
Anybody know why this is?
I attempted to install MSDE on a WinXP machine(server) today. I installedfrom the command prompt as follows:-[color=blue]>setup INSTANCENAME="NetSDK" SECURITYMODE=SQL BLANKSAPWD=1[/color]Before I get 'blasted', I know that I 'really shouldn't' use a blank sa pswdbut.......I did :-)I then detached (sp_detachdb) an existing db from another machine. Moved itonto the new instance and reattached it.Finally, I executed the following scripts:-sp_addlogin @loginame = 'name', @passwd = 'password', @defdb = 'dbName'sp_grantdbaccess 'name'sp_addrolemember 'db_owner', 'name'So, this was fine and I could connect to the new db using either windowsintegrated security or 'name'/'password' BUT..BIG BUT, only at the server.When I tried to connect from a client I received an error message, 'SQLServer Does Not Exist or Access Denied'.I am assuming that all is well with the db and that it is something I havedone...or more probably not done with the sql server instance (as the errorsuggests:-). Can anyone please suggest my error?Thanks
View 3 Replies View RelatedI'm trying to install the MSDE2000 on window xp, sp2. During the installing, apperance the percent bar is rolling back, which is not even completed install. I had read the issue from microsoft to restart the server service, and...but no luck. Is there anyone has an ideas.
View 1 Replies View RelatedMy Problems & Situation:Hi! I am a ASP.NET starter. My platform is WinXP Home Edition and I haven't installed any version of SQL server before.I download different version of MSDE and extracted in my C drive separately, including: 1. Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) Release A 2. Microsoft SQL Server 2000 Service Pack 3a (contained MSDE 2000) 3. MSDE 2000 for Developers Using Visual Studio .NETsince all of the above versions have the same problem when I try to install it.
The problem is that when I double click each of the setup.exe, it will show a pop up error:[A strong SA password is requires for security reasons. Please use SAPWD switch to supply the same. Refer to readme for more details. Setup will now exit.]
Then I found a solution from Microsoft, it told me that: 1. Run the setup in the command prompt 2. Locate in the extracted path 3. type --> "Setup.exe /qb+ INSTANCENAME=NetSDK DISABLENETWORKPROTOCOLS=1 SAPWD=<pwd>"
p.s. I have changed the <pwd> to 123abc
However....another Error Occur:1st pop up --> [Unable to determine system default collation.]2nd pop up --> [Microsoft SQL Server Desktop Engine Setup failed.]
My Question:1. Why the error still occour when I type that command to setup? (Solution from Microsoft)2. How can I fix it and complete the installation?3. How many users(maximum) can be created in a MSDE database?
Greateful if anyone can give me hand.
hey guys heres my problem iam trying to install SQL server2000 but i keep on running into problems....??
here is what iam having problems with
setup SAPWD="AStrongSAPwd" SECURITYMODE=SQL
it keeps saying the instance name specified is invalid there has to be an easyer way to run the program...??
i have all ready set up an instance name and the SAPWD.
any suggestions?? please help
Hi,
I have a problem with the database that I created using MSDE 2000 SP4. I tried to attached the database into the new SQL Express using the sp_attach_db and it worked. The message mentioned is that the DB has been upgraded. When I tried to attach back the DB back to my MSDE, it can't be done.
My PC is XP pro SP2. Before I reattach the DB back to MSDE, I detach the DB from my SQL express.
Is it because once the SQL express upgraded the DB, it cannot be supported by MSDE or SQL 2000 ?
Thanks. Any help is greatly appreciated.
Hi
Im installing MSDE2000 on new Machine Pentium IV LGA Processor HT technology; OS Windows 2000 Professional. Its getting roll Back after some installation.
The same setup if im installing on my other new Machine With Scoket 478 Processor OS Windows2000 Professional. Its installing completly.
Is there any compatibilty problem.
Please Advice me what to do. Thanks In advance
Ii have installed msde 2000 now all my Access files are in 2000 format how do i change back to 2003?
View 1 Replies View Relatedlooks like a noob question but how can i manage msde2000...i can see sql is runnin but how can i create database , attach/detach database, write functions and so on...
thanx alot for the reply :)
Hi there,
I'm having some trouble with my MSDE2000 (version 8.00.194) and I'd appreciate any insight you could provide...
Long story short, I'm not sure what went wrong, but after stopping my SQL server to change DBs, it wouldn't start again. On the server, it showed no errors. In my services list, it said something along the lines of 'This service has no actions to perform, and so will not start'. It was a few days back, so I forget the exact message...
After restarting my PC, the service started without any errors, but my ODBC Connections will not find my SQL server. I get the following messages with the following scenarios:
Server: (local) : SQL server does not exist or access denied.
Server: . : Specified SQL server not found.
Server: 127.0.0.1 : Login failed for user <username>.
Server: <PC name> : Login failed for user <username>.
I have come across a similar issue before, where re-installing the MSDE sorted it out, this time however, I cannot uninstall the desktop engine: simply shows 'An error has occured during the installation' and nothing else after that. I also cannot apply any service packs, I get the same message as above. I have also tried upgrading to MSDE2005 (using company CDs on my PC at work), to be told that the installation has been blocked due to the following software: 'MSDE2000 8.00.194'.
For the record, I have also installed SP3 for Win XP... Not sure if that might be the issue? I somehow doubt it though. I tried a system restore to the day before the problem started, and it is still doing the same after a successful restore.
Help?!? Please? I need an SQL server for my work software to function correctly, I work in a busy call centre and I cannot get this fixed myself. I'm on the brink of formatting with a fresh install if XP.
Regards,
Andre.
I have side by side msde2000 and sqlexpress installed. I need to move a db that has been detached from msde2000 and where it works perfectly fine into sql express. After I select the .mdf file to attach I get this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'LTBAHIASQLEXPRESS'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
SQL Server detected a logical consistency-based I/O error: torn page (expected signature: 0x55555555; actual signature: 0x55555551). It occurred during a read of page (1:97) in database ID 6 at offset 0x000000000c2000 in file 'C:Memo2005DiaryMEMOinMEMOsql.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Converting database 'MEMOsql' from version 539 to the current version 611.
Database 'MEMOsql' running the upgrade step from version 539 to version 551. (Microsoft SQL Server, Error: 824)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=824&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Thanks for any help,
Luis
I just downloaded and installed MSDE2000 sp3a for winform and asp.net
quickstart tutorial. But I found it has no sample database such as pubs
and northwind. It used to have these databases. At least in last September
when .Net web Matrix came out.
If this is the case, can someone tell me where to get the sql scripts
to create Northwind database in MSDE?
Becasue the winform tutorial uses this database.
Thanks in advance!
Lei Xu
hi there,
i have following system:
the MSDN is running on a win98 machine,
the client-applications, which uses the DB are running on winXP.
there are (SOMETIME!) connection problems to the DB, i guess because of
connection timeouts.
unfortunately i can not change the system, i only can change some setting
or install additionally components such as MDAC.
what can i do,
please help me, it is a support case for a customer.
thank you very much.
mik
Hello !
I have installed msde2000A , but wanted to use Adventure Works database for which I am trying to install sql server express edition 2005 ,
But I want to install it w/o removing earlier msde2000A .
Is it possible.. I was guessing I could install 2 instances .
1st of mase200A and 2nd that of sql express edition 2005.
If it is poss , how to do that ? any other particular procedure / or normal install procedure .
Any one can help ?
Thanks
Bobo
Hi,
i have a problem when i try to do an inplace update of msde2000 to SQLServer2005Express (adv.).
The following error message is displayed:
SQL Server Setup failed to execute a command for server configuration. The error was [Microsoft]
[SQL Native Client][SQL Server]Incorrect syntax near '='..Refer to the server error logs and Setup logs for detailed error information
Has anyone a suggestion to solve the problem ?
thank you in forward.
BR
Jürgen
Hi,
Recently when i try to upgrade my current MSDE 2000 (SP3a) to SP4, the system just keep on failing me. Here is the scenario:
1. Download the MSDE2000 SP4 from microsoft
2. Extract the SP4
3. Run the following command in either the command prompt or via a batch file:
echo off
echo "Start to Upgrade MSDE SP4 ... "
setup.exe /UPGRADESP SQLRUN INSTANCENAME=JSNG SECURITYMODE=SQL UPGRADEUSER=sa UPGRADEPWD=Th3B3st /L*v c:MSDE_Log.log
echo "SP4 Upgrade Process completed!"
4. Once the above batch file was runned, the standard SQL configuration screen (gathering information) will be triggered.
5. However after a while the installation will just stopped.
6. When i checked on the log, i have found out that the failure of installation is due to the system has failed to configure the server. PFB for the last few rows of the verbose log:
=== Logging stopped: 8/22/2006 17:36:49 ===
MSI (c) (90:88) [17:36:49:865]: Note: 1: 1729
MSI (c) (90:88) [17:36:49:865]: Product: Microsoft SQL Server Desktop Engine -- Configuration failed.
MSI (c) (90:88) [17:36:49:865]: Grabbed execution mutex.
MSI (c) (90:88) [17:36:49:865]: Cleaning up uninstalled install packages, if any exist
MSI (c) (90:88) [17:36:49:865]: MainEngineThread is returning 1603
=== Verbose logging stopped: 8/22/2006 17:36:49 ===
7. When i check the MSI Installer Event ID at Microsoft site, it just said that this is the server configuration problem and i cant find any solution.
Any forumers here experience the above before? Mind to share some thoughts?
FYI, my current MSDE configuration is as follow:
- MSDE 2000 Release A (SP3a - 8.00.760)
- Installed Instance = JSNG
Thanks.
regards,
JS
Has any one had experience with upgrading MSDE2000 with no instance to SQL2005 Express?
Thanks
ZS
Hi
I am using MS Access project as a frontend and MSDE 2000 as a backend database. I have few users and i want to give every one restricted access to database based on their use.
How can i create user accounts. I checked tools-->Security--> but workgroup admin option is not active. How to solve this puzzle
Thanks in advance
Neha
Can't connect from Win XPpro to named instance nor default instance on server running MSDE2000 SP3 via LAN (WORKGROUP). Works fine from Win 2K in the same network. Attached screen shot of error message. Osql gives the same response.
View 2 Replies View RelatedI am aware that instances of both can exist on the same machine.
But I assume that is when a different instance of SQL Server Express is installed with an existing instance of MSDE2000
Many moons ago, when the various flavours and betas of SQL Express became available, I upgraded from MSDE2000 - didn't think I would need it again.
I now have an application, Sony Vegas 6, which uses MSDE2000 for it's Media Manager. According to their support it won't install to SQL Server Express 2005.
When I try to install MSDE2000, it always fails with "Setup failerd to configure server..." and rolls back.
In the event log, there is an entry
The description for Event ID ( 19011 ) in Source ( MSSQL$SONY_MEDIAMGR )
cannot be found. The local computer may not have the necessary registry
information or message DLL files to display messages from a remote
computer. You may be able to use the /AUXSOURCE= flag to retrieve this
description; see Help and Support for details. The following
information is part of the event: (SpnRegister) : Error 1355.
I have down all the usual things like uninstalling SQL Server Express 2005 (using control panel and msiexec /x {GUID}), patching the registry etc etc
The result is always the same.
The Sony Media Manager is not important and I probably won't use it but it's annoying the hell out of me - I've always claimed, over a good few years, that there was no computer problem that I couldn't finally solve, but presently this has got me beat and I feel undone!!!!!!! :-)
regards
Stuart
www.mckears.com
How do I add login user ASPNET to my SQL 2000 Desktop Engine Server?. I can not find the "Server Manager" in the Start - Programs. Is there any other way to get around adding ASPNET login to the SQL server so I can test my VB program. I got the error: Login failed for user 'com_nameASPNET'.
View 1 Replies View RelatedIs it possible to install and configure the MSDTC resource in a SQL Server 2000 cluster after SQL is installed and running?
When I recently went through a rebuild of my cluster, I forgot to install the resource before installing SQL Server. Now, if I install and bring online the MSDTC resource the SQL disk groups will not fail over correctly. The SQL Server resource will not come online.
Thanks in advance for any help. I would really like to avoid rebuilding again.
Andy
Hi all, Im new here so il start with a little introduction of myself, My name is Arjan im 19 years old from Holland, and i work for a company to compleet my ICT Education.
My situation:
My boss gave me a server with server 2003 standard and Sql server 2005 and visual studio 2005 installed already, he asked me if i could figure out how the 'new' reporting services work, Im pretty new to SQL and the reporting service but i figured out i had to install asp.net / frameworks and IIS.
So right now i wanna start the Reporting Services Configuration Manager and i get an error that says 'Invalid namespace' and when im trying to approach by using my browser i get 'page not found' so obviously their is Alot wrong. I asked my boss if i could not reinstall everything and do it in the correct order (IIS / ASP.net / Frameworks before installing SQL server 2k5 but that was not an option because we dont seem to have the cd's anymore.
The server is not connected to any network or the internet.
My Question:
Is their any way to fix this? and if yes could anyone tell me where to start
Thanks in Advance!
ps if their is information or logs that u need in order to help me just say so :-)
-Arjan
Hi
I have installed SQL Server Express 2005 on my machine.
I want to install SQL Server Standard Edition 2005 on my machine to check new services it has.
Can these 2 Editions coexist with each other, or any troubles you think might encounter?
Thanks
Hi friends, I am unable to Install the sql 2005 exp. edition under the vs2005 on windows xp sp2. It gives error "sql express returns some value to os".
Please co-operate with me thank u.
I am learning ASP.NET from teach yourself ASP.NET in 24 hours. When i try to connect to the SQL Server i get an error "SQL Server does not exist or access denied".
SQL appears to exist, and to be running. I am trying to connect through Localhost.
Where should i be looking if access is being denied by a firewall and how should i disable it
Hi, I am working on installing SP2 for SQL Server 7.0. Do I have to install the SP2 on every SQL Server 7.0 Client machine?
or do I have to do anything on the client machines? Thank you.
Whenever we install SQL Server 7.0 on a box with 6.5 on it, the installation always fails at the last hurdle. It gives the following error:
Microsoft SQL Server Version Switch
An error occured which prevented a succesfull version switch. Please make sure the Registry Editor, Query Analyzer and ISQL are closed, and try running vswutch.exe again.
We've followed all technet article recommendations to no avail. Any ideas ?
Thanks
I've been trying to re-install 7.0(on my test server) but duuring the wizard setup it says:
"Unable to find path HKEKY_LOCAL_MACHINE_SOFTWAREMicrosoftMSSQLSERVERSe tup.
A uninstall was done but I don't understand why it won't just install from the
CD.
Also How can you change the server name in EM, under the SQL Server Group
you have the server name, i.e ServerA. When I put 2000 on the same machine that wouldn't do the re-install for 7.0 it shows the server name as ServerAServerA and I just want to rename it to ServerA. But in EM under 'Registered SQL Server Properties' the server name field is not active for modification.
I would appreciate any help to the up-most. Thanks
Hi there
Can anyone tell me which version ofn SQL 2000 RS is on, i.e developer, enterprise etc?
Regards
Tim
I installed SQL 7.0 in windows 2000, at first it was working fine but after a few hours it cannot connect to my database.
I reformat my pc coz I was so desperate to make it work but after reformatting SQL won't work still. It cannot connect with my database which is also the same computer. I tried uninstalling and reinstalling it over and over but I still face the same problem.
The SQL Server Service Manager there's nothing in the Service boxes.
I need your Help really bad!!!
I tried installing SQL Server 2005 for educational purposes.
When I double cliked Setup.exe I get the messege "You computer does not meet service pack levels ....."
I use Windows XP Professional Service PAck 2
what could be the reason
Hello:We just leased a dedicated server and now want to install SQL Server2000. We though we could just copy the contents of the CD to a folderon the server and run AUTORUN. While it does load the splash screen,when we click install SQL Server Components, the demoshield splashscreen comes up and then disappears. The install stops.Any ideas? Is this even possible?Thanks in advance.Jason Sweet
View 2 Replies View Related