Installing MSDE2000 For Remote Connection
Jul 23, 2005
I attempted to install MSDE on a WinXP machine(server) today. I installed
from the command prompt as follows:-
[color=blue]
>setup INSTANCENAME="NetSDK" SECURITYMODE=SQL BLANKSAPWD=1[/color]
Before I get 'blasted', I know that I 'really shouldn't' use a blank sa pswd
but.......I did :-)
I then detached (sp_detachdb) an existing db from another machine. Moved it
onto the new instance and reattached it.
Finally, I executed the following scripts:-
sp_addlogin @loginame = 'name', @passwd = 'password', @defdb = 'dbName'
sp_grantdbaccess 'name'
sp_addrolemember 'db_owner', 'name'
So, this was fine and I could connect to the new db using either windows
integrated security or 'name'/'password' BUT..BIG BUT, only at the server.
When I tried to connect from a client I received an error message, 'SQL
Server Does Not Exist or Access Denied'.
I am assuming that all is well with the db and that it is something I have
done...or more probably not done with the sql server instance (as the error
suggests:-). Can anyone please suggest my error?
Thanks
View 3 Replies
ADVERTISEMENT
Aug 26, 2004
Hi,
I've been trying to follow Microsoft's instructions on installing MSDE2000 for Visual Studio. I do instancename=VSDOTNET SECURITY=SQL SAPWD=XXXX and all that. When I reboot, I notice that I have no services in the SQL Service Manager, nor can it find my computername.
Anybody know why this is?
View 1 Replies
View Related
Oct 11, 2006
I'm trying to install the MSDE2000 on window xp, sp2. During the installing, apperance the percent bar is rolling back, which is not even completed install. I had read the issue from microsoft to restart the server service, and...but no luck. Is there anyone has an ideas.
View 1 Replies
View Related
Apr 12, 2005
My Problems & Situation:Hi! I am a ASP.NET starter. My platform is WinXP Home Edition and I haven't installed any version of SQL server before.I download different version of MSDE and extracted in my C drive separately, including: 1. Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) Release A 2. Microsoft SQL Server 2000 Service Pack 3a (contained MSDE 2000) 3. MSDE 2000 for Developers Using Visual Studio .NETsince all of the above versions have the same problem when I try to install it.
The problem is that when I double click each of the setup.exe, it will show a pop up error:[A strong SA password is requires for security reasons. Please use SAPWD switch to supply the same. Refer to readme for more details. Setup will now exit.]
Then I found a solution from Microsoft, it told me that: 1. Run the setup in the command prompt 2. Locate in the extracted path 3. type --> "Setup.exe /qb+ INSTANCENAME=NetSDK DISABLENETWORKPROTOCOLS=1 SAPWD=<pwd>"
p.s. I have changed the <pwd> to 123abc
However....another Error Occur:1st pop up --> [Unable to determine system default collation.]2nd pop up --> [Microsoft SQL Server Desktop Engine Setup failed.]
My Question:1. Why the error still occour when I type that command to setup? (Solution from Microsoft)2. How can I fix it and complete the installation?3. How many users(maximum) can be created in a MSDE database?
Greateful if anyone can give me hand.
View 3 Replies
View Related
Oct 12, 2004
hi there,
i have following system:
the MSDN is running on a win98 machine,
the client-applications, which uses the DB are running on winXP.
there are (SOMETIME!) connection problems to the DB, i guess because of
connection timeouts.
unfortunately i can not change the system, i only can change some setting
or install additionally components such as MDAC.
what can i do,
please help me, it is a support case for a customer.
thank you very much.
mik
View 1 Replies
View Related
Oct 11, 2007
HiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks
View 3 Replies
View Related
Apr 7, 2008
When running the project in debug mode or non-debug mode, I get the following error from MS Visual Studio:
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package [Connection manager "SYBASE_CONNECTION"]: The connection manager failed to defect from the transaction.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
Any ideas???
View 8 Replies
View Related
Aug 30, 2006
When I create a new odbc connection to a SQL server 2005 Db I get a failure telling me dat de SQL server does not allow remote connections.
How can I allow the server to allow this.
Any help appreciated
regards
View 1 Replies
View Related
Nov 14, 2007
For some reason I'm getting the following error trying to run a package via SQL Agent. I put the dll in the "pipelinecomponents" folder and ran gacutil on it (it shows up in the "assembly" folder) but this error says the component isn't registered... hmmmmmmmmmmmmmm HELP !!!!
Description: The "component "UnpackDecimal" (721)" failed to cache the component metadata object and returned error code 0x80131600. End Error Error: 2007-11-14 10:58:17.06 Code: 0xC004706C Source: Load MyPackage Load MyPackage (DTS.Pipeline) Description: Component "component "UnpackDecimal" (721)" could not be created and returned error code 0xC0047067. Make sure that the component is registered correctly. End Error Error: 2007-11-14 10:58:17.06 Code: 0xC0048021 Source: Load MyPackage Load MyPackage (UnpackDecimal [721]) Description: The component is missing, not registered, not upgradeable, or miss... The package execution fa... The step failed.
View 6 Replies
View Related
Mar 1, 2006
I'm getting "Access denied" error when I try to connect to SSIS from my desktop (Database Engine is fine). I'm a member of sysadmin within SQL, as well as an administrator on the server. I don't have any problem when I log on to the server directly via Remote Desktop and open SSIS.
I went into the surface area config tool, and I see that Database Engine and Analysis Services both expand and have a sub tabs to enable Services and Remote Connections, but Integration Services does not expand to a Remote Connections option, just Services. We're running MSDN Enterprise edition.
Does it matter if all the SQL services are using "Local System" for the logon ? I use an administrative logon on my SQL2000 boxes, and was fiddling with them on the 2005 box yesterday, but it seemed to cause more problems, so they are all Local System for now.
Am I missing something obvious ?
View 3 Replies
View Related
Jul 6, 2006
My target market includes Micro-SMEs (i.e. 1 to 2 person business). This users often have multiple computers, but tend to run XP Home edition. Hence I need to set up a SQL Server Express on one of the machines and allow the other machines to access it.
So far I realise:
XP machines must be SP2ed (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=379560&SiteID=1)
XP Home machines need to be in the same work group (am I right?)
I have to Open up the MS Firewall on each of the machines for TCP ports 1433 and 1434 (see http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=511441&SiteID=1)
On the machine hosting the SQL Server Express instance, start the "Browser" Service (again http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=511441&SiteID=1)
I have several questions surrounding this.....
If I package SQL Express with my application is there away I can get the Browser to be started automatically? Do I need to write some custom code using the Microsoft.SqlServer.Management namespace?
My understanding of the SQL Server security model is that ideally I should ideally use Windows Authenticated users connections - how do I set up the remote XP Home user on the XP Home machine which is hosting the SQL Server Instance? I'm thing I may have to used Mixed Mode and pass the SQL Server username and password in the connection string. Am I right or can I use Windows Authenticated?
Are there any more resources other than http://msdn.microsoft.com/sql/express/default.aspx?pull=/library/en-us/dnsse/html/emsqlexcustapp.asp which I should look at for help on installing an app bound to SQL Server Express?
Thanks in advance
Ben
View 4 Replies
View Related
Jun 14, 2006
Hi,
Does anyone know if it's at all possible to install SQL Server Express 2005 over a Remote Desktop on a Windows XP machine.
I know there are problems running SQL over Remote Desktop, in that it won't start up a User Instance, but I wasn't sure if we can install over Remote Desktop.
If it's not possible, can anyone point me to an official document stating this fact?
Thanks
Sam
View 3 Replies
View Related
May 19, 2008
Hi. I'm (very) new to SQL Server. I have run into what seems to be a very common problem, judging by the number of Google hits, but it's not actually in the FAQs here, as far as I can see.
Situation
I installed SQL Server Express with Advanced Services 2005 on my Windows XP Pro laptop, using (with one exception) the default install. The exception was to put the data files on a separate partition (D: ) where I have more free space.
SQL Server Management Studio Express connects happily, and I set up a single data import table.
Issue: bcp Fails to connect to default local instance
I initially tried bcp in output mode, prior to working in earnest on importing my data. However the command line-
bcp MyDatabaseName.dbo.UserProfile out UserProfile.txt -T -c
Fails with the error-
Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].
As I understand it, the local instance of SSE is the default, and should use a local (shared memory?) connection. This seems to work for Management Studion Express, but not bcp.
While investigating this problem, I tried enabling remote connections (all types) through the Surface Area Configuration wizard, and found that remote connections using either of:
bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S localhostsqlexpress
bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S mycomputernamesqlexpress
both work ok.
Extra Info
When starting Management Studio Express, it says something like "Configuring environment for the first time". However it says this every time it is started, not just the first run after installation, does this indicate some configuration data is not being successfully stored?
I have found threads that look similar to my issue-
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=836670&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=3351349&SiteID=1
However these do not relate directly to bcp, and to be honest my knowledge of SSE is slender enough at this stage that i'm unsure if there are really relevant.
Any hints on how to proceed much appreciated.
Regards: Colin E.
View 6 Replies
View Related
Jun 19, 2006
Basically I've been using Visual Studio 2005 for a few weeks now moving a Pocket PC project from 2003 to 2005. When I hit the Start Debugging Button every time until today the project would rebuild and deploy to my pocket PC allowing me to debug etc but now I get
The remote connection to the device has been lost.
Please verify the device conection and restart debugging.
I used to get this problem in VS2003 sometimes and just like the numerous posts on different sites that I've looked at the problem eventually goes away and I'm none the wiser. One guy said that he found that if he went to bed the problem was resolved when he came back!
My PDA running Windows 2003 2nd Edition is directly connected to my PC via a USB port. I've rebooted my PC and done a soft reset on the PDA but it didn't help. I'm using ActiveSync 4.1.
Does anyone know how to resolve this problem?
View 54 Replies
View Related
Apr 24, 2007
Hello everyone, I am trying to connect to a remote SQL 2005 database from Microsoft SQL Server Management Studio.I enabled the remote connection on the server and creating a user on the server.I am trying to connect to the server from my workstation using sql server authentication with the login name already created on the server.
I am receiving this error: cannot connect to "server name"cannot open user default database. Login failed.Login failed for user "username".(Microsoft SQL Server, Error: 4064)
Can anyone help?
View 1 Replies
View Related
Mar 31, 2008
hello !
I am deploying a websete in visual studio2005 after deploying, when run a website Login Failed: The user is not associated with a trusted sqlserver connection. error occurs plese anybody helpme. urgent
Thanks.
View 3 Replies
View Related
Apr 23, 2006
I am attempting to connect to SQL 2005 server. The server and the VS 2005 are on the same computer. I have configured the db so it uses the security for asp. The log in section connects fine and checks for the user. I have combined the old db with the new ASP security. If the user is not found then I open a connection using the open command and check for the user in the old part of the db. The is where I have trouble. I get the message below that the server connect but then won't allow remote connections. I have check the setting and the allow remote connections is checked. Thank in advance if anyone can help.
Endeavor
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.)
View 2 Replies
View Related
Oct 4, 2004
I am now trying to connect with the correct details to an MS SQL machine.
The machine in question is not local to me and the internal ID is //bobsmachine01.
I know this is a dumb question, but I shall ask it anyway...I am using MS Access 2000's "Upsizing wizard" and it asks me for the machines name - what should I put to connect to it??
I know the IP of the machine and the internal ID for the MS SQL Server.
Any help much appreciated,
Chas
View 1 Replies
View Related
May 8, 2006
How would I connect to remote SQL 2005 database using Management Studio?
The only difference from local DB is that I type IP address instead of server name, right?
I'm getting error:
Testing the registered server failed. Verify the server name, login cridentials, and then click Test again.
Additional information:
An error has occured while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 53)
I did everything from article "How to configure SQL Server 2005 to allow remote connections"(http://support.microsoft.com/?kbid=914277&SD=tech). SQL Browser enabled. Both TCP/IP and Named Pipes are enabled. Exceptions in firewall for sqlsrvr.exe and sqlbrowser.exe added.
Did not help.
What else could I check?
View 3 Replies
View Related
Jun 7, 2007
Hi,
I have SQL Server 2005 running on a machine with "Allow Remote Connections" property turned on. This server has SQL Server Authetication mode turned on.
I can connect to the server locally with sa login and password but when I try connecting to the server remotely it gives me following error:
TITLE: Connect to Server
------------------------------
Cannot connect to ServerName.
------------------------------
ADDITIONAL INFORMATION:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233).
Any help is appreciated.
View 4 Replies
View Related
Jul 5, 2007
Hi all,
I have a machine that is running windows 2003 server, and sql server 2005 developer edition(let's call this machine server one). I have another machine running windows xp and sql server developer edition, visual studio 2005 pro(machine 2). I have developed a small windows application on machine 2, but I'm trying to connection to the database that one mcahine one, and I keep getting some the following error
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)"
Any idea why? How do I need to configure that ?thanks
View 5 Replies
View Related
Apr 14, 2008
Hello,
I have microsoft sql server management studio express 2005
but if i want to connect it says that i cant connect because remote connection are not aload but i searched support on microsoft and i enabled it restarted the database enige but still dont works can please someone help me?
Pleasant greats.
Irakli
AND HOW DO I KNOW WHAT MY SERVER NAME IS?
MAYBE ITS BECAUSE MY SQL BROWSER ISINT RUNNING? AND I CAN'T START IT...
View 18 Replies
View Related
Mar 9, 2007
Hi all,
Need to know if its possible to allow remote connections and access a Sql Ce database using TCP/IP.
Thanks for your help
Hach
View 3 Replies
View Related
Apr 12, 2006
Could someone tell me how to remote connect to other server. Everytime when I try to connect to other server, I get an error message. Eventhough I have opened the 1433 port, allow the remote connection using both TCP/IP and named pipes, and open the firewall for connection. The following is the error message
"An error has occurred while establishing a connection to the server. When connection to SQL Server 2005, this failure may be caused by the fact that under the default setting SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error:26 - Error Locating Server/Instance Specified)(Microsoft SQL Sever)"
Thank you
View 4 Replies
View Related
Feb 10, 2007
hi guys,
i'm trying to access my friend's database from my computer but i cant seem to detect his database though i can detect his server.
what i did was i tried adding a connection to his database.i typed in the server name but his database name couldnt be detected.
the server name was: WPLSQLEXPRESS
am i missing something here?
this was the error generated when i tried testing the connection:
An error has occurred while establishing a connection to the server.When connection to SQL Server 2005,this failure might be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces,error: 28 - Server doesn't support requested protocol)
what does it mean?how do i solve this problem?
thanx
View 13 Replies
View Related
Mar 13, 2005
Hi all,
Recently i have installed (winxp sp2) and i have encountered with some
problems, for example i always use the following Connection string for
connecting to SqlServer 2000 and work with it:
"Server=localhost;database=Test;Trusted_Connection=yes"
But now this string doesn't work and after some minutes i found out the solution as follows:
"Server=MYPCNAME;database=Test;Trusted_Connection=yes"
or
"Server=(local);database=Test;Trusted_Connection=yes"
or
"Server=.;database=Test;Trusted_Connection=yes"
(Note that my computer name really is "MYPCNAME")
Between three above solutions i want to know why "Server=MYPCNAME" work properly
BUT "Server=localhost" doesn't work after installing WinXP SP2.
Thanks in advanced.
View 1 Replies
View Related
May 23, 2005
hey guys heres my problem iam trying to install SQL server2000 but i keep on running into problems....??
here is what iam having problems with
setup SAPWD="AStrongSAPwd" SECURITYMODE=SQL
it keeps saying the instance name specified is invalid there has to be an easyer way to run the program...??
i have all ready set up an instance name and the SAPWD.
any suggestions?? please help
View 2 Replies
View Related
Sep 11, 2005
Hi,
I have a problem with the database that I created using MSDE 2000 SP4. I tried to attached the database into the new SQL Express using the sp_attach_db and it worked. The message mentioned is that the DB has been upgraded. When I tried to attach back the DB back to my MSDE, it can't be done.
My PC is XP pro SP2. Before I reattach the DB back to MSDE, I detach the DB from my SQL express.
Is it because once the SQL express upgraded the DB, it cannot be supported by MSDE or SQL 2000 ?
Thanks. Any help is greatly appreciated.
View 1 Replies
View Related
Jan 23, 2007
Hi
Im installing MSDE2000 on new Machine Pentium IV LGA Processor HT technology; OS Windows 2000 Professional. Its getting roll Back after some installation.
The same setup if im installing on my other new Machine With Scoket 478 Processor OS Windows2000 Professional. Its installing completly.
Is there any compatibilty problem.
Please Advice me what to do. Thanks In advance
View 2 Replies
View Related
Oct 23, 2006
Ii have installed msde 2000 now all my Access files are in 2000 format how do i change back to 2003?
View 1 Replies
View Related
Jun 24, 2006
System.Data.SqlClient.SqlException: An error
has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact
that under the default settings SQL Server does not allow remote
connections. (provider: SQL Network Interfaces, error: 26 - Error
Locating Server/Instance Specified)
I have enabled the remote connection in the surface area configuration, and i've also enabled my sql browser.
This error raised when i'm testing my just installed WSRFdotnet using
NUnit testing, however, when I tested my remote connection using SQL
Server Management Studio Express CTP, it worked. btw, I'm using SQL
Express
any solutions?
thx
View 3 Replies
View Related
Sep 18, 2006
hi communitythe error something like this " error 40, could not open connection to sql server" . For community information i try to transfer my membership table from sql express 2005 to sql server 2000. my application something like email where user need to create their account first before they can log in. I use membership default in mssql express . and my datacenter do not support sql express ( like all we know most of them). I already surf some tips from the internet how we can transfer our membership from sql exppress to sql server but i get this error . i already try to change the setting from sql server surface area configuration but it still not working.. i hope someone ( the jedi ) can help me .. ThankMay The Force Be With U
View 1 Replies
View Related
Mar 4, 2007
I have researched over and over on how to solve the error code below. I have tried every suggestion under the moon and still get the same error. Please provide some insight. Here is exactly what I have done regarding the remote connection issue:
Error: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
History:
1. Created a test site on my local machine (using MS Visual Web Developer 2005 Express Edition) call WebSite8 for test purposes.
2. Simply created a single page to allow users to create an account by dragging and dropping the CreateUserWizard onto the designer screen.
3. Performed some basic formatting (font, theme, etc) on the web control.
4. Ensure that TCP/IP and allow remote connection defaults were changed to allow remote connections.
5. Verfied that the login control worked on my local machine. Everything worked fine. I was able to create two new users and was sent to the "complete" portion of the control.
6. Opened the aspnet_memberships and aspnet_users databases to ensure that the two test accounts were created.....everything good so far.
7. Copied all files from WebSite8 (1. App_Data Folder - includes ASPNETDB.MDF file created by Developer when I dragged and dropped the CreateUserWizard onto the designed sreen, 2. the main asp web page I called createaccount.aspx, and 3. web,config file) via ftp to my test web site hosted by 1and1. My test web site is named something different that WebSite8.
8. I created a test.htm page on the 1and1 web site to link to the createaccount.aspx page which is in the same path as the test.htm.
9. The process let me enter the user name, password, etc but when I hit submit, I get the error listed below.
10. Followed some other research suggestions and verified that ApplicationName in the aspnet_Membership was set to "/". It is.
11. I checked the web.config file and it does not seem that any connection strings were created when I dragged the CreateUserWizard onto the screen. Not sure if this is an error on this control or not or if it is ok as is(?)
I believe there is some sort of issue on the hosted web site where the sql server is not linking to the database on the hosted site and is likely trying to link back to my "local" server......just a feeling.
I have tried everything that I can think of after performing relentless research on this error. I am new to database programming, ASPNET 2.0, SQL, etc but I catch onto things very quickly.
View 2 Replies
View Related
