We have a SQL 2000 cluster running on WIn2003. in a normal sql install you install Outlook client on SQL Server for Agent to use to send messages. Do you have to do something different for a clustered environment?
View 3 RepliesIs it possible to install and configure the MSDTC resource in a SQL Server 2000 cluster after SQL is installed and running?
When I recently went through a rebuild of my cluster, I forgot to install the resource before installing SQL Server. Now, if I install and bring online the MSDTC resource the SQL disk groups will not fail over correctly. The SQL Server resource will not come online.
Thanks in advance for any help. I would really like to avoid rebuilding again.
Andy
I have a Reporting Services 2005 report that is emailed to users. I created/formatted the report based on how it looked in Outlook 2003 which all of our users had at that time. The report is wide, but just fit in the email window when it was full size. Now I have a user who has been converted to Outlook 2007 and he emailed me a copy of the report he received in Outlook 2007 and it looks like it reduced the column sizes; it does not fill the entire email window and wraps the wording on most lines because the column sizes have been reduced.
The report is:
Delivered by: Report Server E-mail
Include Report is checked
Render Format is Web archive
Any ideas on how I can fix this?
Thanks in advance.
Hello All,If SQL Server is installed on a cluster will it be able to utilize the CPU and memory of all of the servers that are part of the cluster. For example, currently we run SQL Server on one server and at certain peak time the server CPU is maxed out. Will a cluster environment allow SQL Server to utilize mutiple servers for processing eliminating this problem?Thanks, Gary
View 1 Replies View RelatedI am trying to configure a 2 node SQL cluster. MSCS is configured and is failing over correctly, however when I start the installation of SQL Server, and specify the IP address of the virtual server and hit next, the installation hangs, and stops responding. I have configured MS DTC and verified that it shows up in the cluster administrator. I am not sure what else to do, please help.
View 2 Replies View RelatedI am using sql server 2005 with sp1
I want to install SQL Server SP2 on the cluster (Active-Passive). This is my production server. Can anyone tell me how much downtime is involved while installing SP2.
How does sp2 installation works on the cluster? Does it install on the primary node first and then on the secondary node (i.e one node at a time).
I I know during installation it restarts the sql server service. So while installing on 1st node, does it fail over to second node?
Thanks
I am trying to install SQL failover cluster on one of my nodes so it should install sql on the 2nd node. It keeps coming back saying setup failed to start on the remote machine. When I look in scheduled tasks it is listed as could not run. Can someone please help.
View 1 Replies View RelatedI just tried to apply SQL 2005 Std SP2 on a cluster, and all succeeded except for the Database Services. I've looked about and can't see any specific information for this. The Summary.Txt is below. I thought I was following the appropriate steps, according to the SP2 Readme.
Thanks for any help. (I'm at the client today)
Bob Coppedge
me at RLCoppedge dot com
Time: 04/04/2007 10:55:44.249
KB Number: KB921896
Machine: SQL01
OS Version: Microsoft Windows Server 2003 family, Enterprise Edition Service Pack 1 (Build 3790)
Package Language: 1033 (ENU)
Package Platform: x64
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: Yes
Log Location on Passive Nodes:
(SQL01) C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
(SQL02) C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Setup Support Files ENU 9.1.2047 x64
Database Services (MSSQLSERVER) ENU RTM 2005.090.1399.00 x64 STANDARD
Notification Services ENU SP1 9.00.2047.00 x64 STANDARD
Integration Services ENU SP1 9.00.2047.00 x64 STANDARD
SQL Server Native Client ENU 9.00.2047.00 x64
Client Components ENU SP1 9.1.2047 x64 STANDARD
MSXML 6.0 Parser ENU 6.00.3890.0 x64
SQLXML4 ENU 9.00.2047.00 x64
Backward Compatibility ENU 8.05.1704 x64
Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x64
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Setup Support Files
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlSupport.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final) :
Status : Failure
Log File :
Error Number : 11009
Error Description : No passive nodes were successfully patched
----------------------------------------------------------------------------------
Product : Notification Services
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Reboot Required
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixNS9_Hotfix_KB921896_sqlrun_ns.msp.log
Error Number : 3010
Error Description :
----------------------------------------------------------------------------------
Product : Integration Services
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixDTS9_Hotfix_KB921896_sqlrun_dts.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Native Client
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Reboot Required
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlncli.msi.log
Error Number : 3010
Error Description :
----------------------------------------------------------------------------------
Product : Client Components
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Reboot Required
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQLTools9_Hotfix_KB921896_sqlrun_tools.msp.log
Error Number : 3010
Error Description :
----------------------------------------------------------------------------------
Product : MSXML 6.0 Parser
Product Version (Previous): 3890
Product Version (Final) : 6.10.1129.0
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_msxml6.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : SQLXML4
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlxml4.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Backward Compatibility
Product Version (Previous): 1704
Product Version (Final) : 2004
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SQLServer2005_BC.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Microsoft SQL Server VSS Writer
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlWriter.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
No passive nodes were successfully patched
Exit Code Returned: 11009
I'm building an SQL Server 2005 cluster on a Windows 2003 cluster. Windows 2003 cluster and MSDTC service are all up and running properly. No problems there, but when I try to install SQL Server 2005 as a cluster service, it fails. The installation goes past the stage where it validates both the nodes and doesn't find any issue there, but when it tries to install fiels it fails. It fails on node 2. When I checked the scduled installer job it creates on node2 to install, the job never seems to run and fails. I'm using only one user account to setup windows cluster MSDTC and SQL Server. Now the complications: It is 64 bit Windows 2003 and SQL Server 2005. Also, the node 1 is built to be a domain controller as well.
Any help will be highly appreciated.
We have successfully been using MSCS with MSSQL7 (SP1) running under NT4 EE
(SP6a), installed in an active/active configuration using, two DELL
PowerEdge 6350 machines. Recently I installed MSSQL7 (SP2), I followed the
instructions that came with SP2, and unclustered the SQL nodes using the
Failover Cluster Wizard, and installed SP2, this was uneventful, and
appeared to install correctly. Next I tried to recluster the SQL nodes
using the Failover Cluster Wizard as directed. This failed with: "Could not
run setup on remote machine. SQL Cluster Setup failed." So I began the
usual research using the usual resources, and have found articles that
discusses this error, and the things to look for when it happens. I have
exhausted all suggestions without success. I appear to have everything
correctly configured. I have enabled Cluster Logging (level 3), following
are the two things I have found that indicate something is wrong:
1. In the SQL Error Log the following gets logged when I run the wizard:
"Attempting to initialize Distributed Transaction Coordinator."
"Failed to obtain TransactionDispenserInterface:
XACT_E_TMNOTAVAILABLE"
2. In the Cluster Log I see the following message repeatedly:
"[ClRtlCopySecurityDescriptor] MakeSelfRelativeSD failed,
0x00000551"
3. In the sqlclstr.log I see the following, without an indication of
which file is missing:
"[reghelp.h:235] : 2 (0x2): The system cannot find the file
specified."
"[clushelp.cpp:166] : 259 (0x103): No more data is available."
"[validate.cpp:147] DeleteTestGroup:OpenClusterResource: 5007
(0x138f): The cluster resource could not be found."
"~~~ XXX InstallRemote failed"
Does anyone have any ideas about what could be causing this problem?
Many thanks in advance.
Christpher Cutts
LifeMasters Supported SelfCare
if you were running a SQL2k cluster, multiple named instances, would you let someone install the oracle client so DTS packages could be setup ?
I am a bit apprehensive about putting this oracle client on my production box. would appreciate any experience people have in this area.
thanks
Carol
Hi,
I am installing SSRS 2005 with the following scenario:
- Report Server and Report Manager will be installed on web server
- The repository databases (ReportServer and ReportServerTempDB) will be hosted in SQL2005 cluster server.
Both servers are running Win2003 SP1, SQL/SSRS 2005 SP1
When I try to browse the ReportServer virtual directory from IIS on the web server, the system keep asking username and password. After 3 times trials and it failed eventhough the username and password is correct.
The error message is:
HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials.
Internet Information Services (IIS)
I've been searching on the web and found couple of articles talking about this issue. I've tried some of them like: http://support.microsoft.com/kb/887993 or even this one: http://groups.google.ca/group/microsoft.public.sqlserver.reportingsvcs/browse_frm/thread/991c9178ceab8f58/8f1a447aa60ad837?lnk=st&q=reporting+services+the+server+is+not+responding&rnum=3&hl=en#8f1a447aa60ad837
But this doesn't work.
I've checked both event viewer both web server and SQL server, but I can't see any information that tell me what had happened.
I also look at BOL, but doesn't help much.
Is there anyone can help me or point me to the right direction? Is there any guide document that explains step-by-step how to install SSRS in my scenario or similiar?
Many Thanks,
Usman Tjiudri
if it is supported to install Reporting Services on both the active and passive nodes in an SQL Server Failover Cluster and use the non-active node as a warm standby?We have relatively simple reporting requirements so the idea would be that if Node 1 went down, we could just repoint our users are Node 2 temporarily. Both reporting services instances would be configured to target the same SSRS database running on the SQL Cluster.
View 2 Replies View RelatedI have no idea how to apply "fixes" or updates to SQL Server when it is running on a cluster.
We are currently running SQL Server 2005 with SP2. The version would be Microsoft SQL Server 2005 - 9.00.3042.00 (X64) Feb 10 2007 00:59:02 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
I am hoping that someone can tell me of a document that exists, that includes the very basics, on how to do this. I need something that says go to the cluster and do these steps in this order, etc. from start to finish.
Thank you.
Greetings,
I need to install the SSIS components on the referenced database server. I believe the SSIS components are cluster aware, so I was planning on just doing add/remove and selecting the components. Rather than breaking the cluster apart to patch the components back to SP1, I was thinking of just running the SP2 install right over the top of the running cluster to bring everything up to SP2.
I'm looking for any suggestions/comments on whether this is the proper way to proceed or if I'm going to have a problem.
TIA
I have DBA that is convinced that they need domain admin rights to install SQL 2005 into an existing cluster. The domain groups and service accounts for SQL have been created already. Is having domain admin rights required during the install of SQL 2005 in a cluster?
View 1 Replies View RelatedHello
I've installed Windows 2003 SP2 in a stand-alone cluster (will be adding a second node later). I'm now installing SQL Server 2005 Developer Edition 64-bit extended and would like to have the "Create a SQL Server Failover Cluster" box to not be grayed out. Even when I check the "SQL Server Database Services" box, it still has the cluster box grayed out.
Any idea's?
TIA!
Hi
I am having some teething problems while installing SQL on a 3 node cluster. Within the Cluster configuration I have 3 Cluster Groups with each of them having their associated disk resources. All these disk resources physically exist on a SAN.
The actual cluster is running absolutely fine and I can access all the disks from their respective owner node. The problem only starts when I start installing SQL Server 2005 on this cluster. I specify the Cluster group from the Cluster Group Selection and choose the desired partition and then the error message pops up
"There is not enough diskspace on the destination disk for the current SQL Server data files. To proceed, free up disk space to make room for data files, or install the data files to a different drive"
But the disk I am trying to install it on is 264Gb and none of it is used. I have also tried to change it to a different disk within the same Cluster group but to no avail. I have even tried to install it in a different cluster group all together but I get the same error message.
I have googled around havent found anything so far. The disks have got full permissions for the account I am installing SQL with.
Any help will be much appreciated.
Regards
Adnan
would like to know if it's possible to install SQL Server Failover cluster instance with shared storage along with standalone installation with Always on ( always on uses WSFC underneath).
View 1 Replies View RelatedDuring the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
4. net start winmgmt
2<sup>nd</sup> Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command: sc config winmgmt start= auto
Last command to run after above steps
4. Command: mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies View RelatedOn our SQL 7.0 servers we have always used Outlook 97 as our mail client and until last week we've had no issues with this setup.
A week ago a number of the servers with this set up started hanging on jobs with mail statments using xp_sendmail and the only solution was to reboot the server. All the servers use the same NT account and the same mail box for the mail. I've talked with our Exchange guys and they say that nothing has changed on the mail server. I found a Q article (Q315886) that suggests starting sql as an application not a service to see if pop ups could be causing the problem. Well no pop ups.
I installed Outlook 2000 on the boxes and that seems to have fixed it. Or at least no problems today with those servers.
Has anyone seen this before or have any idea what might be the cause of it?
thanks
Donna
I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies View RelatedI have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'
[Code] ....
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
Anyone ever setup the OutLook Express client to use SQL Mail ? I'm able to send messages via OutLook Express; however, SQL Mail doesn't recognize any profiles.
In using OutLook Express do I need to also setup a PostOffice. My server currently doesn't have any POST OFFICE or Mail software under control panel.
Thanks in advance,
Walker
Can anyone recommend a source of info on connecting Outlook to a SQL database of contacts? Also interested in third party tools/solutions that I could just buy and customize.
I need to be able to get at data from my own VB apps, but it would be nice to dump contacts into Outlook for people taking laptops and CE machines on the road. Even nicer if they could use Outlook to update addresses and upload to SQL Server.
Or am I just dreaming?
Is there any way to stop Outlook97 from checking for new mails automatically?
Thanks for any help!
Anybody use them together? If so, how did you set it up?
View 1 Replies View RelatedI have a question that I hope to get an answer from you.
We had an exchange central which used to get data from the outlook and save it in the database, then we have another solution that filters the data we need from there and save it into another database to produce a report for the economy department to be used for wages. Now the exchange central has many problems and they decided not to use it any more. What I want to do is to get data(calendar posts) direct from the outlook into my SQL 2000 database. Is it possible? If yes, what is the best approach to do?
Thanks in advance