Hi,
I am installing SQL Server 2005 on a server that is currently running SQL Express. My reason for installing full SQL is due to the database size limitation of SQL Express.
Can anyone give me advice on whether I should unistall SQL Express before installing SQL Server 2005 or just install over the top of Express.
Thanks
Hi
I have installed SQL Server Express 2005 on my machine.
I want to install SQL Server Standard Edition 2005 on my machine to check new services it has.
Can these 2 Editions coexist with each other, or any troubles you think might encounter?
Thanks
Hi,
I just installed SQL 2005 express. It did not prompt me for a selection for the collation. How do I tell what collation it is installed at? And how do I tell whether it is case sensitive or not?
Thanks,
Razzle
hello, I am having some problems installing the sql 2005 express that comes with the asp.net 2.0
It says that the installation failed thats all. Anyone with that kind of problem?
I am working on Win2K Pro & had SQL Server 2005 Express & SQL Server Management Studio installed. The SQL Server name was MerverSQLEXPRESS. Due to some unavoidable reasons, I had to repair (& not re-install) Win2K but after doing so, I found that I am not able to connect to the database server. I uninstalled all the components related to SQL Server 2005 Express (like Management Studio, Support Files, BOL etc.) from my m/c & then restarted my m/c.
After doing so, I first re-installed SQL Server 2005 Express & other related components (I intended to install SQL Server 2005 Management Studio after installing SQL Server 2005 Express). While installing SQL Server 2005 Express, all the steps get executed successfully except for the last one which happens to be SQL Server Database Services. At this point, I get the following error:
An instance with the same name is already installed on this computer. To proceed with SQL Server Setup, provide a unique instance name.
The problem is after I click the OK button, I am not even given the option to change the instance name! The Status message corresponding to SQL Server Database Services just says Setup failed. Refer to the Setup log for details. Finally, when I click the Next button, the next dialog finishes the Setup (showing the Finish button).
Now how do I overcome this problem? Please note that the Authentication mode I am using is Windows Authentication.
Someone please suggest me a concrete solution. It's driving me nuts! My receding hairline is getting further receded!
Lastly, please note that, as far as possible, I would like to keep the instance name as MerverSQLEXPRESS only.
Hi everyone
I have just installed SQL Server 2005, default settings. I have attempted to add a new ODBC driver using Control Panel - Administrative Tools - Data Sources (ODBC) - System DSN tab - Add - SQL Server - default settings, but it fails.
I did all this for MySQL some months ago, but I must have forgotten something.
Please can someone tell me what to do next.
Thanks in advance.
Jonathan
Is it possible to install SQL2005 Express via InstallShield??
Has anyone had any experience doing this?
Any suggestions or recommendations??
Thanks
Hello,
I have a problem installing SQL express from a CD, it installs fine but the installation wizard does not load automatically, so I have tried to setup manually through Add and Remove programs.
But when I get pass System configuration check menu, i do not get the Registration info menu, it goes straight to SQL server express setup and then to another server express setup menu (it skips 3 menu pages) it should have MSML5 components such as SQL setup files, SQL native client, SQL VSS writer etc but it is completely empty. Then I get the finish screen.
However, when I uninstall SQL express, I see the MSML screen with all the components listed before it uninstalls.
I hope this makes sense and I hope someone can help.
Thanks.
Hi, I've recently installed the SQL SRV Express SP1 (ADV + Toolkit) (IIS already installed)
select @@version returns:
Microsoft SQL Server 2005 - 9.00.2040.00 (Intel X86) Mar 13 2006 11:20:51
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition with Advanced Services on Windows NT 5.1 (Build 2600: Service Pack 2) - this seems to be ok.
The "Reporting Services Configuration" fires up, but when trying to
start the reporting service (pane Server Status) the following error occurs:
System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
Trying to start the RS service via the Service pane doesn't work either..
Any hints to solve this problem? Thanks!
Hi,
I'm preparing to install VS2005 along with SQL Server 2005 express on VISTA. Honestly, I just hope nothing will get screwed up...
- After installing VS2005, I will first install SQL Server 2005 express from my VS2005 DVD
- I will then install SQL Server 2005 express with Advanced services SP2 as well
as SQL Server 2005 express toolkit SP2 upgrades.
A few technical questions:
1. Considering the fact that I have Office2007 as well as Outlook 2007 installed on my VISTA machine, is there any install issues regarding SQL Server 2005 and Office2007? I remember having read posts reporting install problems... Any feedback would be appreciated.
2. After I install SQL Server 2005 Express from VS2005 DVD, do I need to install SQL Server 2005 Express SP1 before installing SP2?
Thanks all for your help,
Stéphane
Hi,
I noticed that SP2 was finally released. A few question before I dive in that install:
- Must I uninstall anything before installing SP2?
- Considering that fact that I keep a copy of each install programs on a disk in case of crash recovery, must I keep SP1 files as well as SP2 files or can I consider that SP2 is complete by itself, that it completely overwrite SP1 and so delete SP1 files and just keep SP2 files for backup?
- If I also have Compact Edition installed, is there any SP2 issued for it?
- Is there a place where I can sign in so I can receive some sort of email notice where an upgrade is available for download for SQL Server 2005 as well as for Visual Studio 2005?
Thanks in advance,
Stéphane
hi friends!!!
to install sql server express 2005, do i have to install the windows installer 3.0. when i run the setup, after extracting the files, there is a message displaying such that to continue installation, you need to install the windows installer 3.0.
is it so?
regards.,
sekar
Hi guys,
I'm currently taking a course in Visual C#.
The school provided a link to MSDNAA for a free educational copy of Visual Studio 2008, however our school uses Visual Studio 2005. I wanted to use the same thing so I downloaded Visual C# express 2005.
I can't get the darned thing to install properly. I get an error at the end saying
The following failed to install
Micosoft SQL Server 2005 Express edition x86
I don't know what to do. I won't be able to get to work on assignments if I don't get this working soon.
Downloaded the program and followed the instructions (as vague as they are) the only thing I see to execute is the configuration tools. I am certain I have missed something. Can anyone assist?
Many thanks!!
Hello,
I'd like to install SQL Server 2005 Express.
I just want to confirm that I can just install it on top of what I already I have.
About 2 months ago, I installed Visual Studio 2005, full edition (not express).
I can't remember what I did regarding SQL... whether I installed anything or not.
On my PC at the moment, in the Control Panel ---> "add/remove programs" section, I have :-
Microsoft SQL Server 2005 Size 197,00MB
Microsoft SQL Server 2005 Mobile [ENU] Developer Tools Size 6,95MB
Microsoft SQL Server Native Client Size 4,16MB
Microsoft SQL Server Setup Support Files (English) Size 20,60MB
Microsoft SQL Server VSS Writer Size 0,66MB
From my start menu --> All Programs, the only SQL program is "Microsoft SQL Server 2005", and this just has one sub-menu to "configuration tools". I cannot see a link to any SQL server, so I don't think I have it installed.
Should I uninstall the 5 programs listed above first ? Or can I just install SQL Server 2005 Express on top of what I already have ?
Thanks for your advice.
Ian.
Hi All,
I'm new to programming and I've got to develop a db for a uni project. However after downloading SQL Server 2005 express ed, I found that I could not find the command prompt to start writing scripts (black and white DOS screem). I only have the configuration tool option in my menu (within that server configuration manager, error & usage reporting and server surface area config).
How do I get started with creating my database, please help....................
I'm I not looking in the right place for the console (command prompt to run scripts) or have I not downloaded the right stuff.
I need help urgently!!!
Thanks, in advance
Hi everyone,
I have run into a snag trying to install SQL Express 2005. I'm installing it on a highend Win XP Pro PC with 1 GB of RAM. I'm providing you with my summary.txt file from my installation. As you can see, the last 2 entries failed to commit because it could not open the registry key.
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Wed May 09 09:21:08 2007
Machine : 74-1R8J081
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0019_74-1R8J081_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : 74-1R8J081
Product : Microsoft SQL Server Native Client
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0019_74-1R8J081_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : 74-1R8J081
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0019_74-1R8J081_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : 74-1R8J081
Product : MSXML 6.0 Parser
Product Version : 6.10.1129.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0019_74-1R8J081_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : 74-1R8J081
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0019_74-1R8J081_SQLSupport_2.log
--------------------------------------------------------------------------------
Machine : 74-1R8J081
Product : Microsoft SQL Server Native Client
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0019_74-1R8J081_SQLNCLI_2.log
--------------------------------------------------------------------------------
Machine : 74-1R8J081
Product : MSXML 6.0 Parser
Product Version : 6.10.1129.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0019_74-1R8J081_MSXML6_2.log
--------------------------------------------------------------------------------
Machine : 74-1R8J081
Product : SQL Server Database Services
Error : Could not open key: HKEY_LOCAL_MACHINESoftwareClassesSQLActiveScriptHostCLSID. Verify that you have sufficient access to that key, or contact your support personnel.
--------------------------------------------------------------------------------
Machine : 74-1R8J081
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.2.3042.00
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0019_74-1R8J081_SQL.log
Last Action : InstallFinalize
Error String : Could not open key: HKEY_LOCAL_MACHINESoftwareClassesSQLActiveScriptHostCLSID. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
Error Number : 1402
--------------------------------------------------------------------------------
I went into RegEdit and reviewed the permissions and I have Full Control for this particular entry. Does anyone know how I can resolve this issue?
Thank you.
Hi all,
I'm completely frustrated in trying to install this product, I've checke the following from the error file
MSI (s) (20:CC) [20:59:45:951]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server90BootstrapMSIRefCount 3: 5
MSI (s) (20:CC) [20:59:45:951]: Product: Microsoft SQL Server Setup Support Files (English) -- Error 1402. Could not open key: HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server90BootstrapMSIRefCount. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
Any advice would be GREATLY appreciated
Cheers
Norman
this is from the core file
Microsoft SQL Server 2005 Setup beginning at Wed Aug 16 18:14:14 2006 Process ID : 4668 c:8c27e35b5d509dc8609c33e266setup.exe Version: 2005.90.2047.0 Running: LoadResourcesAction at: 2006/7/16 18:14:13 Complete: LoadResourcesAction at: 2006/7/16 18:14:13, returned true Running: ParseBootstrapOptionsAction at: 2006/7/16 18:14:14 Loaded DLL:c:8c27e35b5d509dc8609c33e266xmlrw.dll Version:2.0.3609.0 Complete: ParseBootstrapOptionsAction at: 2006/7/16 18:14:14, returned true Running: ValidateWinNTAction at: 2006/7/16 18:14:14 Complete: ValidateWinNTAction at: 2006/7/16 18:14:14, returned true Running: ValidateMinOSAction at: 2006/7/16 18:14:14 Complete: ValidateMinOSAction at: 2006/7/16 18:14:14, returned true Running: PerformSCCAction at: 2006/7/16 18:14:14 Complete: PerformSCCAction at: 2006/7/16 18:14:14, returned true Running: ActivateLoggingAction at: 2006/7/16 18:14:14 Complete: ActivateLoggingAction at: 2006/7/16 18:14:14, returned true Delay load of action "DetectPatchedBootstrapAction" returned nothing. No action will occur as a result. Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions: Condition "EventCondition: __STP_LaunchPatchedBootstrap__4668" returned false. Running: PerformSCCAction2 at: 2006/7/16 18:14:14 Loaded DLL:C:WINDOWSsystem32msi.dll Version:3.1.4000.2435 Product "{2750B389-A2D2-4953-99CA-27C1F2A8E6FD}" versioned 9.00.0981 is not compatible with current builds of SQL Server.Expected at least version: 9.00.1399.00 The Product Name is "Microsoft SQL Server 2005 Tools Express Edition Beta 3" Loaded DLL:C:WINDOWSsystem32msi.dll Version:3.1.4000.2435 Error: Action "PerformSCCAction2" threw an exception during execution. Return Code: 70032 Message displayed to user SQL Server 2005 Setup has detected incompatible components from beta versions of Visual Studio, .NET Framework, or SQL Server 2005. Use Add or Remove Programs to remove these components, and then run SQL Server 2005 Setup again. For detailed instructions on uninstalling SQL Server 2005, see the SQL Server 2005 Readme. Class not registered. Delay load of action "UploadDrWatsonLogAction" returned nothing. No action will occur as a result.
I'm having trouble loging into sql...then I remebered when I first installed it on my XP pro machine the system config check showed everything passed except the following:
System Configuration Check
-
- COM Plus Catalog Requirement (Warning)
Messages
COM Plus Catalog Requirement
If SQL Server Setup fails, Setup will roll back the installation but may not remove all .manifest files. The workaround is to rename the files and then rerun Setup. For more information, see How to: Work Around COM+ Check Failure in SQL Server Setup.
- Can this be the reason I cannot log into sql ?
I have Visual Web Developer 2005 Express edition and I wanted to install SQL Server 2005 Express edition.From this page, I have downloaded and installed 'Microsoft SQL
Server 2005 Express Edition' and 'Microsoft SQL
Server 2005 Express Edition with Advanced Services http://msdn.microsoft.com/vstudio/express/sql/download/After the installation, how should I access the SQL Server 2005 Express edition?Because the only thing listed in 'Start > All Programs > SQL Server 2005' is 'Configuration Tools'I was hoping that when I install SQL Server 2005 express edition, I would get all the menu that I get by installing SQL Server 2000.So after installing SQL Server 2005 Express edition, what should I be expection? Thanks
When I try to install SQL Server 2005 Express I find that after a short time it discontinues and say's "Installation not completed etc" on looking at the logs it say.s "Could not find IIS" do I need XP Pro to be able to install SQL Server
Thanks in advance
I've been having horrific problems installing and working with SQL Server Express 2005. I installed SSE with the Visual Web Developer tool so I assumed that the instance would synch up; but it didn't (see log contents at end) so I opened up permissions wide open to all users, and even that didn't help. I don't know for sure but I suspect that the problem probably relates to my deleting SQL Server entries from the registry and all directories and files related to it on disk. After going through the process of uninstalling and reinstalling Express 2005 numerous times, I became frustrated and decided to pull out all stops.
After reading and following all MSDN instructions and every blog and forum I could possibly locate on the subject, I could never resolve the problem of not reaching my database. I enabled all pipes and TCP/IP, etc. in the Configuration Manager, in both instances I had created; had run all command-line procedures recommended; and used cleanup programs that I could find, before reinstalling. I couldn't even get success in doing a test connection. I did get to a point where my ASP returned the message that it had connected but that the user didn't have permissions.
I think I'm destined to working with Access, which is a shame since I have encouraged students in a Web development class I teach to work with the more powerful SQL Server products. They've had success with SQL Server, so I'm setting a bad example.
Thanks in advance for help any of you can suggest.
Microsoft SQL Server 2005 Setup beginning at Sun Feb 05 23:48:08 2006Process ID : 2036c:6645bd818fccc8ef0bad80e6a12f5bsetup.exe Version: 2005.90.1399.0Running: LoadResourcesAction at: 2006/1/5 23:48:6Complete: LoadResourcesAction at: 2006/1/5 23:48:6, returned trueRunning: ParseBootstrapOptionsAction at: 2006/1/5 23:48:6Loaded DLL:c:6645bd818fccc8ef0bad80e6a12f5bxmlrw.dll Version:2.0.3604.0Complete: ParseBootstrapOptionsAction at: 2006/1/5 23:48:8, returned trueRunning: ValidateWinNTAction at: 2006/1/5 23:48:8Complete: ValidateWinNTAction at: 2006/1/5 23:48:8, returned trueRunning: ValidateMinOSAction at: 2006/1/5 23:48:8Complete: ValidateMinOSAction at: 2006/1/5 23:48:8, returned trueRunning: PerformSCCAction at: 2006/1/5 23:48:8Complete: PerformSCCAction at: 2006/1/5 23:48:8, returned trueRunning: ActivateLoggingAction at: 2006/1/5 23:48:8Complete: ActivateLoggingAction at: 2006/1/5 23:48:8, returned trueRunning: DetectPatchedBootstrapAction at: 2006/1/5 23:48:8Complete: DetectPatchedBootstrapAction at: 2006/1/5 23:48:8, returned trueAction "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions: Condition "EventCondition: __STP_LaunchPatchedBootstrap__2036" returned false.Running: PerformSCCAction2 at: 2006/1/5 23:48:8Loaded DLL:C:WINDOWSsystem32msi.dll Version:3.1.4000.2435Loaded DLL:C:WINDOWSsystem32msi.dll Version:3.1.4000.2435Complete: PerformSCCAction2 at: 2006/1/5 23:48:9, returned trueRunning: PerformDotNetCheck at: 2006/1/5 23:48:9Complete: PerformDotNetCheck at: 2006/1/5 23:48:9, returned trueRunning: ComponentUpdateAction at: 2006/1/5 23:48:9Complete: ComponentUpdateAction at: 2006/1/5 23:48:30, returned trueRunning: DetectLocalBootstrapAction at: 2006/1/5 23:48:30Complete: DetectLocalBootstrapAction at: 2006/1/5 23:48:30, returned trueRunning: LaunchLocalBootstrapAction at: 2006/1/5 23:48:30
As the subject says, I am getting an error installing SQL Express 2005 SP1 on XP Home/SP2. I have never had a previous version of SQL server installed. I have never had Visual Studio installed. I have tried extracting the setup files and running from a different directory. I have tried installing the advanced package as well with the same results.
When I run the setup, the Client and support files are successfully installed. It then goes on to the system analysis, where I get one warning about my hardware but I have checked the help file and my system appears to meet the system requirements. After I click Next from this window is where I get the error,
"Error writing to file: Access is denied.
. Verify that you have access to that directory."
After looking into the log files I see this,
Error Code: 0x80070005 (5) Windows Error Text: Access is denied. Source File Name: t:yukonsqlsetupdarwinsqlcastubstreamca.cpp Compiler Timestamp: Wed Dec 21 16:49:23 2005 Function Name: streamBinaryToDisk Source Line Number: 238 Error 1304. Error writing to file: Access is denied. . Verify that you have access to that directory.
Does anyone know what is wrong? I have installed this on many W2K machines at work as well as installed the full version of SQL Server 2005. I have never seen these errors on any of those machines. This is the first XP machine I have ever tried to install on so I am not sure if this is an OS problem or not.
Thanks in advance.
I am running WinXP Home edition, and I was trying to install SQL Server Express, but the error message is too vague for me fix. It says my computer lacks the "Service Pack Requirements" to run the software, but I'm afraid I don't know which service pack requirements the error is talking about. What Service Pack do I need to download?
Here is the report from the install:
System Configuration Check
- WMI Service Requirement (Success)
Messages
WMI Service Requirement
Check Passed
- MSXML Requirement (Success)
Messages
MSXML Requirement
Check Passed
- Operating System Minimum Level Requirement (Success)
Messages
Operating System Minimum Level Requirement
Check Passed
- Operating System Service Pack Level Requirement. (Error)
MessagesOperating System Service Pack Level Requirement.
The current operating system does not meet Service Pack level requirements for this SQL Server release. Install the most recent Service Pack from the Microsoft download center at http://go.microsoft.com/fwlink/?LinkId=50380, and then run SQL Server Setup again. For hardware and software requirements, see the readme file or SQL Server Books Online.
- SQL Server Edition Operating System Compatibility (Success)
Messages
SQL Server Edition Operating System Compatibility
Check Passed
- Minimum Hardware Requirement (Warning)
Messages
Minimum Hardware Requirement
The current system does not meet the recommended hardware requirements for this SQL Server release. For detailed hardware and software requirements, see the readme file or SQL Server Books Online.
- Pending Reboot Requirement (Success)
Messages
Pending Reboot Requirement
Check Passed
- Default Installation Path Permission Requirement (Success)
Messages
Default Installation Path Permission Requirement
Check Passed
- Internet Explorer Requirement (Success)
Messages
Internet Explorer Requirement
Check Passed
- COM Plus Catalog Requirement (Success)
Messages
COM Plus Catalog Requirement
Check Passed
- ASP.Net Version Registration Requirement (Success)
Messages
ASP.Net Version Registration Requirement
Check Passed
- Minimum MDAC Version Requirement (Success)
Messages
Minimum MDAC Version Requirement
Check Passed
- Edition Change Check (Success)
Messages
Edition Change Check
Check Passed
I've been trying to install SQL Server Express 2005 on my machine at home (XP Pro). However, when I get done, I get the following error when I restart my computer (at the login screen): "Your SQL Server installation is either corrupt or has been tampered with (Error getting instance ID from name.). Please uninstall the re-run setup to correct this problem."
I have uninstalled and reinstalled a number of times, with always thesame result. I had Visual Studio Orcas Beta 2 installed, so I thought that might have had something to do with it. I uninstalled everything development related on the machine (including all versions of the .NET Framework), and am still getting the same error. I tried installing along with Visual Studio 2005 (since it can be installed through the VS installer), same error.
I haven't been able to find any helpful information on this error. It seems everyone else is seeing it when they try to open Management Studio or some other program, but I am seeing it on system start.
Anyone have any thoughts? I'd really like to get this working.
Thanks.
I've been trying to install sql server 2005 express on my laptop with win xp pro. Unfortunately, I keep getting this error:
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Mon Dec 24 09:46:52 2007
Machine : ANN_NGUYEN
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0024_ANN_NGUYEN_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : ANN_NGUYEN
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0024_ANN_NGUYEN_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : ANN_NGUYEN
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0024_ANN_NGUYEN_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : ANN_NGUYEN
Product : MSXML 6.0 Parser (KB933579)
Product Version : 6.10.1200.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0024_ANN_NGUYEN_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : ANN_NGUYEN
Product : SQL Server Database Services
Error : SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]SSL Provider: The certificate chain was issued by an authority that is not trusted.
Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
--------------------------------------------------------------------------------
Machine : ANN_NGUYEN
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0024_ANN_NGUYEN_SQL.log
Last Action : InstallFinalize
Error String : SQL Server Setup could not connect to the database service for server configuration. The error was: {Microsoft}{SQL Native Client}SSL Provider: The certificate chain was issued by an authority that is not trusted.
Error Number : 29515
--------------------------------------------------------------------------------
Can you guys please send me some info how you fix this problem. Thanks in advance.
-Mike
Hi there,
I have created an .iss file which when compiled creates a setup.exe file on a cd rom. Within the .iss I have extracted the sqlexpress files out so that it will install straight from disk to the users machine rather than from the .msi file. All this has been successful so far....
My problem is:- I want to attach a database to the an instance of sqlexpress on the users machine. I have detached it from SQL Server 2000 and copied it over to the cd. The setup file copies these over the users hard drive. I have looked through many forums etc and the words that keep popping up are:-
sqlcmd.exe
template.ini
type into the command prompt.
Sorry if I'm a little ignorant but I am not sure how to go about these. How do I open the command prompt on the users machine from CD? Do I have to create something to do this?
Any information would be appreciated, any guidance or scripts would be great.
Regards
Sam
I was running the setup program and it popped up an error message:
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
I looked at ERRORLOG and it says:
2008-05-07 04:00:11.67 spid4s Starting up database 'msdb'.
2008-05-07 04:00:11.74 Server Error: 17190, Severity: 16, State: 1.
2008-05-07 04:00:11.74 Server FallBack certificate initialization failed with error code: 1.
2008-05-07 04:00:11.74 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
What does this mean?
Thanks!
I am getting an error when trying to install SQL Server 2005 express. I initially had SQL Server 2000 installed which I uninstalled before installing 2005 express edition. I am getting the following error log.....please help
=== Verbose logging started: 12/15/2007 23:14:46 Build type: SHIP UNICODE 3.01.4000.4039 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (70:64) [23:14:46:515]: Resetting cached policy values
MSI (c) (70:64) [23:14:46:515]: Machine policy value 'Debug' is 0
MSI (c) (70:64) [23:14:46:515]: ******* RunEngine:
******* Product: h:cc6704e5af0e1720a26dec7cc3SetupSqlWriter.msi
******* Action:
******* CommandLine: **********
MSI (c) (70:64) [23:14:46:515]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (70:64) [23:14:46:515]: Grabbed execution mutex.
MSI (c) (70:64) [23:14:46:531]: Cloaking enabled.
MSI (c) (70:64) [23:14:46:531]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (70:64) [23:14:46:531]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (70:14) [23:14:46:546]: Grabbed execution mutex.
MSI (s) (70:B4) [23:14:46:546]: Resetting cached policy values
MSI (s) (70:B4) [23:14:46:546]: Machine policy value 'Debug' is 0
MSI (s) (70:B4) [23:14:46:546]: ******* RunEngine:
******* Product: h:cc6704e5af0e1720a26dec7cc3SetupSqlWriter.msi
******* Action:
I received an error installing the SP2 for SQL Server Express 2005 SP2. Here is what the summary says. Can anyone help me. Also I am running a Blackberry Enterprise Server on this machine.
Time: 11/09/2007 22:11:21.703
KB Number: KB921896
Machine: XXXXXX
OS Version: Microsoft Windows Server 2003 family, Enterprise Edition Service Pack 2 (Build 3790)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
/quiet
/allinstances
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Express Database Services (MSSQLSERVER) ENU RTM 2005.090.1399.00 x86 EXPRESS
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Express Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9Express_Hotfix_KB921896_SQLEXPR.EXE
SQL Express Features : SQL_Data_Files,SQL_Engine,SQL_SharedTools
Error Number : 70036
Error Description : Unable to install Windows Installer MSI file
----------------------------------------------------------------------------------
**********************************************************************************
Summary
One or more products failed to install, see above for details
Exit Code Returned: 70036
Thanks in advance.
I attempted to download SQL Express 2005 and received the following. Any assistance or direction to answers would be appreciated. The platform is Windows 2003 Web Edition, is a non Web Edition server required?
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine COMPAQ8 Error:2147749890 (0x80041002).
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=70342
------------------------------
BUTTONS:
OK
------------------------------
This is from the event log
Product: Microsoft SQL Server 2005 Express Edition -- Error 1923. Service 'SQL Server ()' () could not be installed. Verify that you have sufficient privileges to install system services.
I've tried uninstalling through control panel and various cleanup tools and tried reinstalling with no luck.
I'm logged on with a user that has full admin rights.