My question is:
Is it better to have SMS reside on a different sever than a server that is using SQL or is more effecient to have SMS and SQL residing on the same server being that SMS backend is SQL Server? What factors do I need to consider in trying to make this decision? Thanks to whoever can help with this.
Is it possible to install and configure the MSDTC resource in a SQL Server 2000 cluster after SQL is installed and running?
When I recently went through a rebuild of my cluster, I forgot to install the resource before installing SQL Server. Now, if I install and bring online the MSDTC resource the SQL disk groups will not fail over correctly. The SQL Server resource will not come online.
Thanks in advance for any help. I would really like to avoid rebuilding again.
Andy
Hi
I have installed SQL Server Express 2005 on my machine.
I want to install SQL Server Standard Edition 2005 on my machine to check new services it has.
Can these 2 Editions coexist with each other, or any troubles you think might encounter?
Thanks
Hi all, Im new here so il start with a little introduction of myself, My name is Arjan im 19 years old from Holland, and i work for a company to compleet my ICT Education.
My situation:
My boss gave me a server with server 2003 standard and Sql server 2005 and visual studio 2005 installed already, he asked me if i could figure out how the 'new' reporting services work, Im pretty new to SQL and the reporting service but i figured out i had to install asp.net / frameworks and IIS.
So right now i wanna start the Reporting Services Configuration Manager and i get an error that says 'Invalid namespace' and when im trying to approach by using my browser i get 'page not found' so obviously their is Alot wrong. I asked my boss if i could not reinstall everything and do it in the correct order (IIS / ASP.net / Frameworks before installing SQL server 2k5 but that was not an option because we dont seem to have the cd's anymore.
The server is not connected to any network or the internet.
My Question:
Is their any way to fix this? and if yes could anyone tell me where to start
Thanks in Advance!
ps if their is information or logs that u need in order to help me just say so :-)
-Arjan
While attempting to install SQL Server 2005 Enterprise Edition on a Windows Server 2003 box, it is failing as follows...
Microsoft SQL Server 2005 Setup beginning at Thu Sep 20 11:11:35 2007
Process ID : 5440
E:setup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/8/20 11:11:35
Complete: LoadResourcesAction at: 2007/8/20 11:11:35, returned true
Running: ParseBootstrapOptionsAction at: 2007/8/20 11:11:35
Loaded DLL:E:xmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/8/20 11:11:35, returned false
Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run:
Could not parse command line due to datastore exception.
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Fri Jul 29 01:13:55 2005
Function Name: writeEncryptedString
Source Line Number: 124
----------------------------------------------------------
writeEncryptedString() failed
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Fri Jul 29 01:13:55 2005
Function Name: writeEncryptedString
Source Line Number: 123
----------------------------------------------------------
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: cryptohelpercryptsameusersamemachine.cpp
Compiler Timestamp: Mon Jun 13 14:30:00 2005
Function Name: sqls::CryptSameUserSameMachine:rotectData
Source Line Number: 50
2
Could not skip Component update due to datastore exception.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "InstallMediaPath" {"SetupBootstrapOptionsScope", "", "5440"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Running: ValidateWinNTAction at: 2007/8/20 11:11:35
Complete: ValidateWinNTAction at: 2007/8/20 11:11:35, returned true
Running: ValidateMinOSAction at: 2007/8/20 11:11:35
Complete: ValidateMinOSAction at: 2007/8/20 11:11:35, returned true
Running: PerformSCCAction at: 2007/8/20 11:11:35
Complete: PerformSCCAction at: 2007/8/20 11:11:35, returned true
Running: ActivateLoggingAction at: 2007/8/20 11:11:35
Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run:
Datastore exception while trying to write logging properties.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupStateScope.primaryLogFiles
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
00CFCFC8Unable to proceed with setup, there was a command line parsing error. : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
Failed to create CAB file due to datastore exception
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "HostSetup" {"SetupBootstrapOptionsScope", "", "5440"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.HostSetup
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Message pump returning: 2
Any ideas?
Thanks in advance.
Hi,
Is it possible to install SQL Server 2005 Eval on a Virtual PC 2007
client running Server 2008 Beta? Nothing says it isn't possible, it
says I need to service pack it right away, but before it gets started
it comes up with the error 'sqlcu.dll failed to load'. Anyone know
what this is all about?
Any ideas?
Any help would be appreciated.
Thanks!
COM Plus Catalog Requirement (Warning)
Messages
COM Plus Catalog Requirement
If SQL Server Setup fails, Setup will roll back the installation but may not remove all .manifest files. The workaround is to rename the files and then rerun Setup. For more information, see How to: Work Around COM+ Check Failure in SQL Server Setup.
We've devoted a resource to this today, but I have to believe it's something easy that we're overlooking. The scneario is that we have a production Web application that until last weekend had a SQL 2000 back end. This weekend we installed a new instance of SQL 2005 and everything works (we tested in a sandbox environment, but someone must not have load tested enough) and never saw these exceptions. So, after the upgrade we now receive 100's of thexe SQL excptions per day:A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)Does anyone know what we've overlooked that's causing this issue?Thanks for any help!
View 2 Replies View RelatedI have tried several times to install SQL server onto an NT4.0 server which is more than capable of having more than one application to cope with, however, when going through the install procedure the programm stops with the following message
DR.Watson
Access Violation
Setup.exe
In address :
Any hints as to where the problems lies or point me inthe right direction would be appreciated.
I'm trying to install SQL Server 2005 on a server 2000 machine, everything is working with the exception of the Web Service Identity. It is putting machinenameASPNET, and I don't know where to go to make it use something else. I've look around but I have really seen any answers that have worked for me.
Thanks in advance
Will
Hello:
I just installed Windows Server 2008. The installation also included Web Server.
When I tried to install SQL Server, I got the following warning:
IIS Feature Requirement (Warning)
Messag
IIS Feature Requirement
Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
Can somebody advise me on how I can resolve this warning? Would running SP2 take care of this?
Venki
I am trying to install SQL Server Sep 2005 CTP - ENTERPRISE, there are
View 1 Replies View Related
Hi,
Recently I have installed Visual Studion Team System 2008 Development Edition in my sytem. Along with this, MS-SQL Server aand MSSQL Server Compact Edition is also installed. I need to install the SQL Server 2005 in my system.
In such a scenario, does the Compact Edition is required? Can I uninstall them and install Sql Server 2005 only? If I uninstall anything, would it cause any problems for the .Net programs to work?
Please respond asap.
Thanks for any help.
meeram.
when trying to install SQL Sever 2005 to windows server 2003 its display the message Windows Installer 3.1 is required. But when tring to install windows installer 3.1 is displays the message Service Pack version of newer than the update that you are applying, Ther is no need to install the update. Why?
View 1 Replies View RelatedIs there a problem doing this or will it run fine.
View 1 Replies View RelatedI thought SQL Server allowed installation on XP Pro? For some reason I am getting an error. SQL Server Ent. 2000 is telling me that it does not support XP Pro. Is there a work around for this? I don't want to have to rebuild by box just to isntall SQL server!
View 1 Replies View Relatedhi I just installed sql server 6.5 to a workstating of window NT 4.0. then tried to connect to the database... I could not connect, an error message said the server name does not exist and could not connect.... then I move to the control panel and added in the Network icon/ Adapters tap a Network adaptor called MS Loopback Adapter... then restart the workstation and run sql server... guess what happened.... I was able to connect.... great..I am curious to know why I could not connect in the first place and what is the relation between sql server and the adaptor named "Loop back Adaptor"... any ideas...
thanks
Ali
Hi,
I'm going to set up my SQL Server database on a new server. Can someone recommend what service packs I should install (NT 4.0 and SQL Server 6.5)? My old platform is NT 3.51 and SQL Server 6.5 without service packs.
Are the latest packs - SP4 for NT and SP5 for SQL Server - a reasonable choice?
Thanks, Al
We are writing a server application that will require SQL server for the database server. Is it possible (or desirable) to install SQL server as part of our installation process, of course paying Microsoft some lisencing fee? Or, do we have to make our customers install it for themselves?
View 4 Replies View RelatedI am about to install SQL server 2000, but it just occured to me that I might have to install IIS first, is this correct?
grissom
I installed microsoft Visual Studio 2005.
and after that, I installed Sql Server.
All the installations finished in succsess.
But I can't start Sql Server, because there is not Shortcut in the START menu.
How do I execute Sql Server?
Thank's
I installed microsoft Visual Studio 2005.
and after that, I installed Sql Server.
All the installations finished in succsess.
But I can't start Sql Server, because there is not Shortcut in the START menu.
How do I execute Sql Server?
Thank's
Hi,
I downloaded the Sql server 2005 express advanced and installed it in my computer. Everything went well except for a warning message that said "minimum hardware requirements not met". I have dual core pentium 4 computer with 250 G hard disk and 1gb ram.
Anyways, after installing I cannot find the real application anywhere. When I goto start, programs, sql server it only shows sql server configuration tools. I have never used sql server before and how do I start the app?
Any help will be much appreciated. Please note I already installed net framework 2 and also visual studio 2005 professional.
Help!
View 1 Replies View RelatedHi,
I am trying to install MS SQL Server 2005 on Windows XP SP2. When I reach to the screen which asks for component selection, I am unable to select any of the options as they are greyed out. Only documentation/books online option is available for me to select.
Please let me know how I can install it on XP. Thanks
Hi.. ASP I want to install SQL SERVER 2000 on XP..But is it only support for client version.Is there any Service Pack for XP about SQL SERVER 2000 for server version. I have already install XpServicePack2 but problem is still remain. Thanks & RegardsRavinder Sharma
View 1 Replies View RelatedI have just installed SQL Server 2005 Developer Edition and I can't find any of the GUIs from the Start menu. Can anybody help?
View 3 Replies View RelatedPlease tell me what I am missing here. I've got an XP Pro machine with SQL Server Express running and a laptop with XP running the Management Studio Express. This is on my home network which is wireless. I can't see any databases on the XP Pro machine from the laptop. Is there something besides just installing SQL Server that I need to do? I've checked forums, documentation and co-workers but no luck. Thanks in advance
View 2 Replies View RelatedFor some reasons, I uninstalled and reinstalled SQL server in local pc. Now, none of my app is working. My pc is XP professional with sp2 and VS.NET is 2003.
I spent a couple of days but no luck. It drived me crazy!
Help!!!
Hi everybody. I was trying to install MS SQL Server Engine this morning. At the command prompt I typed setup SAPWD=password SECURITYMODE=SQL (where password was my password). After running the MSI I got the following error:
Product: Microsoft SQL Server Desktop Engine -- Setup failed to configure the server. Refer to the server error logs and setup error logs for more information.The Event ID is 1013. Can anybody tell me how to install this program. Thanks in advance for any help.
Hello All,If SQL Server is installed on a cluster will it be able to utilize the CPU and memory of all of the servers that are part of the cluster. For example, currently we run SQL Server on one server and at certain peak time the server CPU is maxed out. Will a cluster environment allow SQL Server to utilize mutiple servers for processing eliminating this problem?Thanks, Gary
View 1 Replies View RelatedHello,
Thanks for reviewing my question. I am trying to install SQL Server 2005 but I keep running into the same error:
SQL Server Setup failed to obtain system account information for the ASPNET account. To proceed, reinstall the .NET Framework, and then run SQL Server Setup again.
The only documentation I find on this is configuring the issolation mode in IIS 6.0.
Any help on is will be appreciated.
Peter
Hi All,I'm running into a problem when trying to install SQL Server onto my laptop that is running Windows XP. The error message that is displayed is:
"An error occurred while creating one or more registry entries. Please see
C:Windowssqlstp.log for details. The problem could be caused by a low
registry quota condition."
Does anyone know how to solve this?? Any help would be appreciated.Thanks,Pete