hi, if I install sql server 7.0 and created a user database named myDB that has some data. and I make a back up as a complete database.. Then I uninstall sql server,yet I am still having the backup in another drive. Then I install sql server 7.0. Can I use the restore method to restore myDB with no problems.
Ahmed
Is anyone here aware of anything else that has been changed in regard to SQLCLR via sp1 (excluding this http://support.microsoft.com/kb/910414/)?
View 1 Replies View RelatedHi,Does a database restoration perform anyupdate-statistics/defragmentation by default. We observed a markedimprovement in performance when we restored the a database from an highend machine to a low machine.Could someone shed some light on this.Regards,Thyagarajan Delli.
View 1 Replies View RelatedI need to know if it is possible, and if so, the effects of restoring databases from a server running SQL Enterprise Edition to a server running SQL Standard Edition. There will be an application database as well as the "master" database to be restored.
Any suggestions?
If I encrypt the SQL Procedures in my database will that cause any sideeffects?Will there be performance degradation?Is it good to encrypt them or they can easily be unencrypted?Thank you
View 3 Replies View RelatedIn SQL7, if you add a column to a table, is it necessary to recompile all
stored procs that reference that table?
Under 6.5, this caused problems at our site unless the Procs were 'refreshed'.
Is this only necessary where select * is used?
Thanks
I like this forum but recently I have noticed they are running ads with sound effects.
I like a lot of programmers I know listen to music through their computer with headphones on all day. Whenever one of those adds fire off it about scares the BeJesus of me and comes through louder than the music. I am playing with my settings but I each time I find one that kills the sound effects it kills the music too.
Starting to make me mad.
Hi,
I was wondering if one could manage the color of the data series in line and bar charts much like what you could do in Excel?
Even changing the default order of the colors would be nice, just so different charts actually look...well, different.
Thanks!
Hello
I'm working on an application which is mainly used to look up compressors and their data which are held in documents.
This is a simplified representation of the tables of importance:
Document
--------
Id (int, identity) (PK)
Number (nvarchar(50))
Compressor
----------
DocumentId (int) (PK, FK)
Id (int, identity) (PK)
Name (nvarchar(50))
CompressorData
--------------
CompressorId (int) (PK, FK))
Id (int, identity) (PK)
Value (nvarchar(50))
The tables are linked as follows:
Document -> Compressor -> CompressorData
Non clustered indexes are created on Document.Number and Compresor.Name because these fields are used for querying.
At certain points corrections will be released on compressors which
will result in:
- Creating new documents with new document numbers (note that a non clusterd index exists on Document.Number).
- Copying affected compressors of existing documents into the new documents (note that a non clusterd index exists on Compressor.Name).
- Copying the data of the affected compressors into the new documents.
This can result in creating ten's of new documents and copying hundreds compressors and thousands compressor data records.
My question:
Will the users still be able to query for compressors while corrections are released (thinking about indexes which need to be modified) or will their be so many locks held that the database becomes unusable?
Thanks in advance,
Alain
Is it possible to install and configure the MSDTC resource in a SQL Server 2000 cluster after SQL is installed and running?
When I recently went through a rebuild of my cluster, I forgot to install the resource before installing SQL Server. Now, if I install and bring online the MSDTC resource the SQL disk groups will not fail over correctly. The SQL Server resource will not come online.
Thanks in advance for any help. I would really like to avoid rebuilding again.
Andy
Running version 6.5 on Windows 2000 and I am unable to find an obvious uninstall utility from the start menu or installation cd...can someone please inform me of how to do this?? Thanks!
View 3 Replies View RelatedHi,I’m having a problem uninstalling SQL Server 2005. I went into add/remove programs,clicked on each of the entries for all of the associated services to remove them,then removed SQL Server 2005, rebooted, and the tasks are still listed in services.There are no entries in add/remove programs.I’m removing SQL Server in order to install Visual Studio first - I’ve still gota problem with the “Package Load Failure” that I posted about last week:http://forums.asp.net/thread/1402873.aspxCan anyone give me a clue as to how I can completely remove SQL Server?I’m running Win 2k SP4.Thanks!
View 4 Replies View RelatedHi all,Afetr a bad install of sql server 2005 which failed due to WMI problem; something that seems unfixable save a reinstall of windows.I am now left with a part installion of sql server 2005. From add/remove programs clicking 'remove' activates nothing as does change. However the files are there in program files.At start up I get multiple fatal errors etc.Does anyone know how I can unistall SQL server 2005 completely - perhaps from the command line?Or..how could I stop SQL server from trying to start at start up?All help most appreciated.TFM
View 1 Replies View Related???
View 1 Replies View RelatedIs it possible to uninstall sp2 on Sql70 server and back to sp1? How?
Thanks much,
Cathy
Thanks a lot.
View 1 Replies View RelatedI uninstalled SQL Server 2005 through "Add or Remove Programs". Apparently I did something wrong. The files are gone, but when I try to reinstall, the installer says SQL Server already exists, and won't install. When I go to the Configuration Manager, it shows all the components, but not of the services are started - or will start. How do I clean this up without wiping my drive and reinstalling my OS?
Hi,
Is it possible to uninstall an SqlServer Instance (not Msde) using msiexec.exe.
For uninstall using msiexec.exe we need product code. But in the registry i could not find any product code for an installed sql server instance
I have sql server express installed in my computer, but I want to uninstall it and install sql server 2005 entreprise edition.
I have successfully uninstalled instance of sql server, but I cannot uninstall the workstation.
here are the log that I have :
=== Verbose logging started: 11/23/2006 13:06:11 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: E:OriginalSQL2005Ent32 bitServerssetup.exe ===
MSI (c) (04:28) [13:06:11:021]: Resetting cached policy values
MSI (c) (04:28) [13:06:11:021]: Machine policy value 'Debug' is 0
MSI (c) (04:28) [13:06:11:021]: ******* RunEngine:
******* Product: E:OriginalSQL2005Ent32 bitServersSetupSqlSupport.msi
******* Action:
******* CommandLine: **********
MSI (c) (04:28) [13:06:11:021]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (04:28) [13:06:11:021]: Grabbed execution mutex.
MSI (c) (04:28) [13:06:11:036]: Cloaking enabled.
MSI (c) (04:28) [13:06:11:036]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (04:28) [13:06:11:068]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (c) (04:28) [13:06:11:068]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (04:28) [13:06:11:068]: MainEngineThread is returning 1618
=== Verbose logging stopped: 11/23/2006 13:06:11 ===
Please help
I am new to SQL Server 2005. I want to uninstall the Standard version, for now, and install the Express version.
In my un-install of SQL Server 2005 I have managed to end up in a situation where I can't completely un-install, nor can I
re-install. I get a 1635 error message when attempting to install and I get the following message at system startup time:
Your SQL Server installation is either corrupt or has been tampered with(could not open SQLEVN70.RLL)
Please uninstall then re-run setup to correct this problem.
Assistance in resolving this would be deeply appreciated.
If I try to uninstall my SQL Server 2005 I nead to have instaled SqlSupport.msi in my list programs and I don't have it.
Then I found it in a folder "...ServersSetup" but it dosen't work. I can't install that program and if it's already instaled I can't see it in my list programs.
What can I do?
how to uninstall SQL Server 2005?
View 1 Replies View RelatedI too can not get sql server 2005 to completely uninstall. In the installation setup, all the services installed except the "SQL Server Native Client" and the "SQL Server Database Services". I got an error stating, that the two mentioned errors, must first be uninstalled. I am having issues uninstalling those files. Are there scripts that will help uninstall these files? Or can you direct me to the proper area to solve this.
View 1 Replies View RelatedI have been trying to uninstall SQL Server (Enterprise Edition) from one of our development boxes and the programs bombs out. When I looked in the log file, I see the following error message which is useless needless to say. Has anyone come across this issue? How did you resolve it? Thanks in Advance.
=== Verbose logging started: 2/11/2008 9:38:35 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (98:C8) [09:38:35:385]: Resetting cached policy values
MSI (c) (98:C8) [09:38:35:385]: Machine policy value 'Debug' is 0
MSI (c) (98:C8) [09:38:35:385]: ******* RunEngine:
******* Product: {EB76B218-8FC5-41DF-9F1F-7FF3E0448383}
******* Action:
******* CommandLine: **********
MSI (c) (98:C8) [09:38:35:385]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (98:C8) [09:38:38:376]: Failed to grab execution mutex. System error 258.
MSI (c) (98:C8) [09:38:38:376]: Cloaking enabled.
MSI (c) (98:C8) [09:38:38:376]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (98:C8) [09:38:38:391]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (c) (98:C8) [09:38:38:391]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (98:C8) [09:38:38:391]: MainEngineThread is returning 1618
=== Verbose logging stopped: 2/11/2008 9:38:38 ===
Hello
after uninstall SQL server 2005 by tools (vs_uninst_betas) still exist in program menu.
How can uninstall definetly.
Thanks you.
1) I uninstalled Advanced SQL with Report Server to install 2005 SQL Developers Editions.
2) For some reason I am unable to completely uninstall Express Report Server.
3) Configuration Manager is still showing SQL Exp Report Server, even though I uninstalled Advanced Server.
4)I tried to remove though A/R programs (using my 2005 DE) - I see it listed but I receive the following error:The setup failed to read IISmime maptable the error code is -2147024893.
5) When I try to use 2005 Report Service Config Manager, I receive the following error: An unknown error in WMI Provider Error code 80040219 wmi provider.
So I am unable to setup my 2005 SQL DE Report Server.
Any ideas on uninstalling Express Report Server...This might be part of my problem.
Thanks
Can someone help me out to uninstall service pack 5a on SQL server 6.5? We have few problems with this new service pack. Stored procedures could not delete temporary tables created in them.
Can I load the backup databases from this service pack(5a) to service pack 4 servers?
Thanks in advance,
Mohan
Hi --
I am a new user of SQL Server, Enterprise Manager, and Reporting Services (all three are installed on my comptuer) and have a problem. Please bear with me, I am very new at this and don't know all the correct terminology!
Someone in our IT group "discovered" that I had two "instances" of SQL on my machine. The way he came to this was that I was trying to use the "." to connect to my local machine in Query Analyzer and it wasn't pulling the databases I had saved to my computer, it was looking in another folder LOCALDB (a subset of my computer's name). He was unsure how to move all of my databases on my comptuer to that LOCALDB folder so he uninstalled the "LOCALDB" entry from the Add/Remove Programs screen to fix this. He said "No to All" when it prompted him to remove shared entries.
Consequently, when I load Enterprise Manager now, I get the "Snap-In failed to initialize" message. I also do not have any SQL Server options in my Start Menu Anymore. Query Analyzer still exists, though, I had saved a shortcut to my taskbar and I can still launch it from there. He is saying all I need is to re-install the "Client Tools" folder from the CD and that will fix the problem. I am skeptical, since it appears to be a larger issue (SQL isn't in my Start Menu anymore!).
I am sure that my SQL install is probably completely corrupt. I would like to return to full functionality of SQL Server, Enterprise Manager, and MRS as soon as possible. Can anyone begin to advise me on how to do so?
I really do appreciate your help in advance.
jzafereo
Hello,
I am trying to uninstall Sql Server 2005 Beta in order to upgrade to
the Sql Server 2005 Enterprise Edition but without success.
Here is what I have already done:
I had VS 2005 2.0 Beta and Sql Server 2005 Beta installed. I wanted to
upgrade to the Professional Editions so I uninstalled VS 2005 2.0 Beta
and Sql Server 2005 Beta from Add/ Remove programs.
I have successfully installed VS 2005 Professional Edition but when I
try to install Sql Server 2005 it gives me an error saying that SQL
Server 2005 has detected incompatible components from beta versions of
Visual Studio, .NET Framework, or SQL Server 2005.
Please advise.
Thank you.
-Arpit
i need help for completely removing sql server 2005 from my computer,in order to reinstall it again.
please help me
...installing SQL Server Express Advanced?
Or before installing the Toolkit?
Or should I just leave it there and everything will be ok?
Thanks!
In previous post in the Getting Started section, I discussed problems trying to run queries on multiple databases:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=299240#299240&SiteID=1
Nobody could help with the problem. I eventually got a query to run after several attempts at deleting and recreating databases. Then, I was hit with the following error message:
Class does not support aggregation (or class object is remote) (Exception from HRESULT: 0x80040110 (CLASS_E_NOGGREGATION)) (Microsoft.SqlServer.SqlTools.VSIntegration)
Nobody could help with that either but based on posts with the same message, I tried uninstalling sql server. It wouldn't uninstall nor can I repair or reinstall. Uninstalling thru Add or Remove Programs only resulted in the program listing being removed from Add or Remove Programs. Most of the sql server programs are still installed. They can be run but continue to malfunction. When I try a new installation, I get a message that the programs are already installed.
Is a complete reinstall of windows xp, programs and data the only solution? I hate to believe it; but, at this point, I see no other choice.
Hi everyone,
I was so glad to get SQL Server Standard Edition that I forgot to remove the .Net Framework last. I almost removed all SQl Server files. I tried to remove the remaining files dealing with SQl Server(including add/remove programs) but I can't remove them all. I tried to go to the page to use the unstall tool for SQl Server 2005 but I get is the following:
You are not authorized to view this page