Insufficient Base Table Information For Updating Or Refreshing
Nov 16, 2006
I am using MADC 2.8 to connect to Sql Sever 2000.
The Connection string uses a File DSN.
I get few records into a Record set using Select Command. Then I update one Col in the Recordset and Updates the database table. I open the recordset in
I am getting "Insufficient base table information for updating or refreshing" Error some times. This Code executes in a Multi user Environment.
I tried to recreate this error condition on my local system by Deleteing/Updating the Reocrds from the table and even locking the table.
I get this error "Row cannot be located for updating. Some values may have been changed since it was last read."
Are both of these errors connected? or is there any way i can get rid of this error
The Code is somethng like this
Set objRs = New ADODB.Recordset
objRs.CursorLocation = adUseClient
objRs.Open strSql, SQLCON, adOpenDynamic, adLockOptimistic
If (Not objRs.BOF) And (Not objRs.EOF) Then
objRs.Fields("FLAG") = 1
objRs.Update
VAR1 = objRs.Fields("0")
Else
MsgBox ("No Reocrds exist")
End If
Thanks in Advance for any help
View 3 Replies
ADVERTISEMENT
Jul 30, 2015
If the id1 will change in table1 it should also change the corresponding id1 field in table2 it does not do anything.
CREATE TRIGGER [dbo].[IDCHANGE]
ON [dbo].[table1]
AFTER UPDATE
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
[Code] .....
View 1 Replies
View Related
Feb 25, 2005
Hi everyone,
I have a big table which contains approx. 31,524,044 rows. The structure of the table look like this:
date ID A B C D
1/1/65 X Null Null Null Null
1/4/65 X 1 2 3 4
...
2/25/05 X 2 3 4 5
1/1/65 Y Null Null Null Null
1/4/65 Y Null Null Null Null
...
2/25/05 Y 2 3 4 5
...
The number of distinct(ID) is approx 3200 and each one has daily historical A, B, C, and D back for 40 years. For going forward I need to update daily information for 3200 ids. Currently, I am runing query against to this table is ok. I am thinking by the time pass by the table will be hudge since "stored historical information". It probably takes "long long long" time to run the query against this table. Any suggestion or comments... what is the best/better solution? Or it is not problem at all?
Thank you everyone for the help.
shiparsons
View 8 Replies
View Related
Jul 20, 2005
This is the case.... I would like to learn the statement that make therelation between these tables.Why? Cos these are separated in two different databases and if a usermake an update in a table from database X these changes must to beapplied in the other table in the another database:The tables are :Principal Database Name : Server Information 2004Table Name : ClientsFields : ID_Client, ClientSecondary Database Name : Index2003Table Name : ContratosFields : ID_Con, ID_Client, ClientI need to write a Trigger for Update the table Contratos everytime auser change the values in Clients.I´m using the follow Trigger :CREATE TRIGGER UPDate_Clients ON dbo.ClientsFOR UPDATEASupdate Contratosset Client = inserted.Clientfrom Clientsinner join inserted on Clients.Client = inserted.ClientWhen I update the register the follow message in the application raise :"Key column information is insufficient or incorrect. Too many rows wereaffected by update."If somebody can help me THANKS A LOT OF....Leonardo Almeida*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 5 Replies
View Related
Jul 20, 2005
This is the case.... I would like to learn the statement that make therelation between these tables.Why? Cos these are separated in two different databases and if a usermake an update in a table from database X these changes must to beapplied in the other table in the another database:The tables are :Principal Database Name : Server Information 2004Table Name : ClientsFields : ID_Client, ClientSecondary Database Name : Index2003Table Name : ContratosFields : ID_Con, ID_Client, ClientI need to write a Trigger for Update the table Contratos everytime auser change the values in Clients.I´m using the follow Trigger :CREATE TRIGGER UPDate_Clients ON dbo.ClientsFOR UPDATEASupdate Contratosset Client = inserted.Clientfrom Clientsinner join inserted on Clients.Client = inserted.ClientWhen I update the register the follow message in the application raise :"Key column information is insufficient or incorrect. Too many rows wereaffected by update."If somebody can help me THANKS A LOT OF....Leonardo Almeida*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Jul 8, 2006
Dear Friends,I have table contain 2000 out of those some areduplicate when i select duplicate records by using Enterprise Managerand make modification to one of those duplicate records the followingmessage flashes/display.key columen information is insufficient or incorrect.Too many rows wereaffected by updatepls suggest what is this and how to solve this problemThanks in advanceDinesh Patwal
View 1 Replies
View Related
Mar 8, 2007
I'm using sql 2005 and used SSIS to import two Access 97 databases into one sql database. I want to keep updating the info, but when I import again, it just appends everything to the sql database. How do I make it so that it only appends any new information or have it delete the tables and then re-add them again so I have all new, updated information? I was also wondering if I could then have a stored procedure or something that does this and runs like twice a day? If I can, how would I do that?
View 1 Replies
View Related
Sep 26, 2005
Hi,I've just installed SQL server and then IIS and SQLCE tools.I created a virtual directory and was trying to update the NTFSpermissions from SQLServer Connectivity management when i got thefollowing error - Access Control List (structure) invalid.Has anyone come across this and if so, what did u do to fix it.ThanksLyn
View 2 Replies
View Related
Jul 20, 2005
himy self avicurrently i am developing one application in vb 6 and back end assqlserver 7 which is used on lan.i have some problem. like in my database i have one table salesvoucherwhich has 'voucherno' field. when 2-3 user will work on salesform at atime [since the softwrae will run on lan] then the same voucherno willsave for all users data which is wrong i need to save different vouchernofor each no. is there any way in sqlserver to apply some condition ondatabase or to set some its property[tables] so that at a time only oneusers data will save depend on firstcome first serve base or is there anyway to make changes in programme.plz help me regarding this i need it very badly.since its my first lan based software plz give me some books nameregarding this software for vb6 and sqlserver7
View 2 Replies
View Related
Sep 21, 2006
I am very new to SQL Server 2005. I have created a package to load data from a flat delimited file to a database table. The initial load has worked. However, in the future, I will have flat files used to update the table. Some of the records will need to be inserted and some will need to update existing rows. I am trying to do this from SSIS. However, I am very lost as to how to do this.
Any suggestions?
View 7 Replies
View Related
Jul 20, 2006
I have a problem where I need to join multiple tables. Part of the query needs me to make the following relationship in a join.
Say I have a table with items, prices, and dates.
PriceTable
ITEM PRICE DATE
A 1.00 5/5/2000
B 3.00 1/1/2000
A 2.50 6/5/2004
....
This table represents an items price from the date on. So Item 'A' costed 1.00 from 5/5/2000 through 6/5/2004, then it costed 2.50 from that day on.
Now say I have a table of transactions with items, amount bought, and dates.
TransactionTable
ITEM AMOUNT DATE
A 5 6/6/2003
A 1 8/5/2003
A 2 8/5/2004
The total for A should come out to be 11.00. There are multiple Items and multiple price changes.
If someone could point out how a inner join of this nature would work it will help me in my query. I guess the reason i say inner join is because I am joining multiple other tables to do my query.
My current Price Table has a start date and an end date and my query looks something like this. "Select SUM(PriceTable.Price * TransactionTable.Amount) From PriceTable Inner Join TransactionTable ON TransactionTable.Date Between PriceTable.StartDate and PriceTable.EndDate AND PriceTable.Item = TransactionTable.Item".
I want something like this because the tables need to be in the format above "Select SUM(PriceTable.Price * TransactionTable.Amount) From PriceTable INNER JOIN TransactionTable ON Max(PriceTable.Date) WHERE PriceTable.Date <= TransactionTable.Date AND PriceTable.Item = TransactionTable.Item".
Hope that made sense, thanks.
View 3 Replies
View Related
Dec 21, 2005
I have a data table I have adabted for my own use and want to add a row to the table. Can I do that with Visual Web developer Express?
I can add update modify the colums and data in the exciting table but I cannot figure out how to add a row.
This is just a simple datalist of names. firstname lastname. there are 18 of them and i want to add more names
View 7 Replies
View Related
Jul 19, 2007
Hi,
Have a LOB error which provides the corrupt PageID and this recommends a DBCC CHECKDB. However I'm unable to identify what the base table for the PageID. DBCC PAGE does not provide base table info (I think), DBCC PGLINKAGE has been retired in SS2005 and DBCC READPAGE doesn't work either.
Does any know of a valid SS2005 command or technique which will allow my to identify the base table for a PageID???
View 1 Replies
View Related
Jul 19, 2007
Hi,
Have a LOB error which provides the corrupt PageID and this recommends a DBCC CHECKDB. However I'm unable to identify what the base table for the PageID. DBCC PAGE does not provide base table info (I think), DBCC PGLINKAGE has been retired in SS2005 and DBCC READPAGE doesn't work either.
Does any know of a valid SS2005 command or technique which will allow my to identify the base table for a PageID???
View 4 Replies
View Related
Jul 25, 2007
This little handy algorithm provides a truth table for any range of numbers between 0 and 65535 of any base between 2 and 36!
As a twist, you can either return the digits concatenated or as separate columns.CREATE PROCEDURE dbo.uspTruthTable
(
@FromNumber SMALLINT = 0,
@ToNumber INT = 255,
@Step INT = 1,
@Base TINYINT = 2,
@Concat BIT = 0
)
AS
SET NOCOUNT ON
DECLARE @Temp INT,
@SQL VARCHAR(8000),
@b VARCHAR(12),
@d VARCHAR(2),
@Diff INT,
@Digits CHAR(36)
IF @FromNumber > @ToNumber
SELECT@Temp = @FromNumber,
@FromNumber = @ToNumber,
@ToNumber = @Temp
IF @FromNumber < 0
BEGIN
RAISERROR('The parameter FromNumber %d is less than 0 (base 10).', 16, 1, @FromNumber)
RETURN
END
IF @ToNumber > 65535
BEGIN
RAISERROR('The parameter ToNumber %d is greater than 65535 (base 10).', 16, 1, @ToNumber)
RETURN
END
IF @Base < 2
BEGIN
RAISERROR('The parameter Base %d is less than 2 (base 10).', 16, 1, @Base)
RETURN
END
IF @Base > 36
BEGIN
RAISERROR('The parameter Base %d is greater than 36 (base 10).', 16, 1, @Base)
RETURN
END
SELECT@SQL = '',
@Temp = FLOOR(LOG(@ToNumber) / LOG(@Base)),
@Diff = @ToNumber - @FromNumber + 1,
@Digits = '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ'
WHILE @Temp >=0
SELECT@b = CONVERT(VARCHAR, @Base),
@d = CONVERT(VARCHAR, @Temp),
@SQL = @SQL +CASE
WHEN @Concat = 1 THEN '+SUBSTRING(''' + @Digits + ''',1 + Number/POWER(' + @b + ',' + @d + ') % ' + @b + ', 1)'
ELSE ',SUBSTRING(''' + @Digits + ''',1 + Number/POWER(' + @b + ',' + @d + ') % ' + @b + ', 1) AS Digit' + @d
END,
@Temp = @Temp - 1
CREATE TABLE#Numbers
(
Number INT PRIMARY KEY
)
INSERT#Numbers
(
Number
)
VALUES(
@FromNumber
)
WHILE @Step <= @Diff
BEGIN
INSERT#Numbers
SELECT@Step + Number
FROM#Numbers
WHERENumber <= @ToNumber - @Step
SET@Step = @Step * 2
END
IF @Concat = 1
SET @SQL = 'SELECT Number, ''''' + @SQL + ' AS Digits FROM #Numbers ORDER BY Number'
ELSE
SET @SQL = 'SELECT Number' + @SQL + ' FROM #Numbers ORDER BY Number'
EXEC (@SQL)
DROP TABLE #NumbersYou can use the algorithm like these examplesEXEC dbo.uspTruthTable
EXEC dbo.uspTruthTable 0, 255, 1, 8
EXEC dbo.uspTruthTable DEFAULT, 15, 1, 2
E 12°55'05.76"
N 56°04'39.42"
View 2 Replies
View Related
Aug 19, 2002
Is there any way to get the base table/column from a view by supplying the view name/column name_in_view? I know about INFORMATION_SCHEMA.VIEW_COLUMN_USAGE, but it doesn't always work. Try it on a regular database, not pubs. Any help is appreciated!
View 1 Replies
View Related
Jun 2, 2007
I'm implementing row-level security in a SQL Server database that uses Microsoft Access for the front end. I'm using a UDF (a view behaves the same way) to restrict access to specific rows of a base table based on membership in a role. According to the reading I've done, if the base table has DENY ALL permissions for the role, and the UDF has GRANT ALL, members of the role should be able to update records in the base table via the UDF, without having direct access to the base table. However, I find that unless I grant appropriate permissions on the base table, the user is unable to update the table via the UDF.
Is this expected behavior? Nothing I've read suggests I should have to grant permissions on the columns of the base table.
View 10 Replies
View Related
Nov 20, 2001
I have converted a access database to sql server 2000 for some reason i keep getting this error base table not found.
I know the sql database is there and i also know the table is there. I'm not sure why i keep getting this error..
thanks
View 2 Replies
View Related
Nov 28, 2006
I want to make a query, stored procedure, or whatever which will only display the primary key where there does no exist a foreign key in linked table.For example. If I had two tables with a one to many relationship.A [Computer] has one or more [Hard Drives]. I want to select only those computers which do not have a Hard Drive(s) associated with them. That is, show all computers where the Computer_ID field in the [Hard Drives] table does not exist. This seems simple but I'm drawing a blank here.
View 1 Replies
View Related
Apr 21, 2015
I have a situation where I have Table A, Table B.
View C is created by joining table A and table B.
I have written a instead of trigger D on view C.
I do not insert/update/delete on the view directly.
For every insert/update in table A /B the values should get insert/update in the view respectively. This insert/update on view should invoke the trigger.
And I am unable to see this trigger work on the view if any insert/update occurs on base table level.
Trigger is working only if any operation is done directly on the view.
View 2 Replies
View Related
Mar 14, 2006
I have a problem with inserting records into table when an indexed viewis based on it.Table has text field (without it there is no problem, but I need it).Here is a sample code:USE testGOCREATE TABLE dbo.aTable ([id] INT NOT NULL, [text] TEXT NOT NULL)GOCREATE VIEW dbo.aViewWITH SCHEMABINDING ASSELECT [id], CAST([text] AS VARCHAR(8000)) [text]FROM dbo.aTableGOCREATE TRIGGER dbo.aTrigger ON dbo.aView INSTEAD OF INSERTASBEGININSERT INTO aTableSELECT [id], [text]FROM insertedENDGODo the insert into aTable (also through aView).INSERT INTO dbo.aTable VALUES (1, 'a')INSERT INTO dbo.aView VALUES (2, 'b')Still do not have any problem. But when I need index on viewCREATE UNIQUE CLUSTERED INDEX [id] ON dbo.aView ([id])GOI get following error while inserting record into aTable:-- Server: Msg 8626, Level 16, State 1, Procedure aTrigger, Line 4-- Only text pointers are allowed in work tables, never text, ntext, orimage columns. The query processor produced a query plan that requireda text, ntext, or image column in a work table.Does anyone know what causes the error?
View 1 Replies
View Related
Feb 21, 2008
Hi,
In my Sql Sever i have added one Database "Devtools", by restoring it from .bak file. Now In my asp page I want to Display a Datagrid with data from a table "Devices". I want to Generate the Gridview dynamically. The columns in the table are dynamic they are not constant so I want to generate my Gridview dynamically. So I want to get the columns info of the table and based on that I want to dynamically add the columns to the table. So how to get the info of the table first. Is there any query where i can get the table info
View 3 Replies
View Related
Mar 5, 2004
Hello:
I have an app that needs to retrieve the list of tables in an SQL database. I see that there is a way to do this with the OLEdb provider (GetOleDbSchemaTable() ), but I can't find a sibling method in SQL. IS there one/ Any Ideas?
Mike
View 4 Replies
View Related
Jul 20, 2000
In oracle there is a describe command:
describe table_name
This command will tell you the columns names, datatypes, and length of the columns for that particular table. Does anyone know if there is a simliar command in SQL server that would do that? The only way that I have found so far is to do a join of the syscolumns with sysobject by table name.
View 2 Replies
View Related
Aug 18, 2000
Okay, I'll admit it: I am not a Guru. Far from it. So here is one of the zillion tasks I cannot do - unfortunately it is one that I need to have done... :
I need a recordset containing the Name, Datatype, Size, Precision, and Name_of_parent_table of all columns in all non-system tables in a given database.
Most likely this can be accomplished with one or two SPs, but which ones? And how?
Is there any Kind Soul out there, perhaps?
Peter
View 5 Replies
View Related
Jul 30, 2004
i need help printing only certain rows from within a table.. for instance, if my table looks like this :
+-------------------+----------------+----------------------+
| Description | Heading | Link |
+-------------------+----------------+----------------------+
| Google | Heading 4 | www.google.com |
| Toms Hardware | Heading 3 | www.tomshardware.com |
| Anandtech | Heading 2 | www.anandtech.com |
| check this out | Heading 1 | www.henryadams.com |
| another heading 4 | Heading 4 | www.heading4.com |
| test | Heading 3 | www.test3.com |
| heading 4 agagin | Heading 4 | laksjdf;alkf |
| new heading test | newHeadingTest | www.newheadingtest |
+-------------------+----------------+----------------------+
and i want to only print out the results for "Heading 4" under the "Heading" column, and only have the results print out once, using php.. how would i do this?
The Headings are inputed by the user through a web interface i created where the user may either select an exisiting heading or type in a completely new one that has nothing to do with any of the others.
thanks for any and all of your help..
View 1 Replies
View Related
Jan 7, 2006
Hi,
Is it possible to retrieve column information alone in the sp_columns command? I saw that it has an additional option "@column_name". But when I include it in my sql, it doesn't work the way I had expected it to..
I had tried sp_columns @table_name='mytable', @column_name='COLUMN_NAME'
I expect just the column names alone in the resultset. What am I doing wrong here?
Thanks and Regards,
Celia.
View 1 Replies
View Related
Feb 22, 2008
Hi,
I have two tables - a stock table and a transaction table. The stock table is called stock and the transaction table is called trans. The table make a point of sale database. Both table have a joining field called prod_no.
I want to extract the stock line by querying stock.prod_no that are not present in the trans table for a period of time specified.
Basically, I want to find dead stock lines that have not been sold and, therefore, are not in the transaction table but that have a stock figure. I have to enter in a start and end date paramater using the ddate field in the trans table. I have looked at left, right and outer joins but with no luck and don't even know if this is the correct query type to use.
any help would be much appreciated,
View 4 Replies
View Related
Jul 20, 2005
I am new to using sqlserver and have been given the task to get the columnname, data type and the description from a given table and put this intoanother table. Can this be done?Thanks in advance.Jeff Magouirk
View 2 Replies
View Related
Mar 14, 2008
Hi
I have a problem I am trying to ascertain the quality of the data in the table of a system we are migrating from one database to another.
We have already taken the step of converting it into SQL server to make sense of it now I wnat to query the data itself
To do this I set up a query that went through sysobjects and syclumns and listed the tables and their columns
What I want to do now is use this information to query the data elements themselves to determine where we should concentrate our data mapping on.
I started out with a cursor doing this
declare @table varchar(50)
declare @col varchar(50)
declare @result int
declare count_cursor cursor scroll
for select tname,cname from infotemp
open count_cursor
fetch from count_cursor
into @table,@col
while @@fetch_status=0
BEGIN
exec ('select count('+@col+') from '+@table)
Fetch next from count_cursor into @table,@col
END
close count_cursor
deallocate count_cursor
But I am having problems getting the counted value into the result value from the exec statement
Anybody got any ideas
Thanks
View 4 Replies
View Related
Dec 16, 2007
Hello friends,
I am new to the SQL Server 2005 development.
From last 1 week or so, i have been facing very strange problem with my sql server 2005s database
which is configured and set on the hosting web server. Right now for managing my sql server 2005 database,
i am using an web based Control Panel developed by my hosting company.
Problem i am facing is that, whenever i try to modify (i.e. add new columns) tables in the database,
it gives me error saying that,
"There is already an object named 'PK_xxx_Temp' in the database. Could not create constraint. See previous errors.
Source: .Net SqlClient Data Provider".
where xxx is the table name.
I have done quite a bit research on the problem and have also searched on the net for solution but still
the problem persist.
Thanks in advance. Any help will be appreciated.
View 5 Replies
View Related
Feb 7, 2001
I would like to know how to (if it is at all possible) in SQL (or even ADO) to retrieve all the data concerning database X's
a) Tables
b) Tables column names
c) Tables column's data types
I don't want to use the doa.tabledefs object.. .i would prefer to do it in SQL, but using ADO objects (since I am developing stuff in VB) would be ok too.
Please Help.. i have been going crazy trying to find anything useful.. email me back please!
Thanks,
Matt
View 2 Replies
View Related
Apr 6, 2008
Hi,
I have a database with two handred tables.I want to get a list that have table name and numbers of record in each table.
Would you please give me a idea if you know how to do this with query or build-in stored procedure.
Thanks a lot
Mark
View 1 Replies
View Related