Integration Services :: Assigning Records To Groups In SSIS Like NTILE?
Aug 18, 2015
I am in middle of my transformation where I have to assign records equally among 3 different groups. I can do that in SQL using NTILE() Over() function. How do I do that in SSIS package. I have applied different business rules during transformation to get unique records and now I have to assign those records to 3 group in and generate excel report.Basically, I will need to have another column which will have those group numbers.
I have one ssis package moving the data from staging to destination. In stating table we have the duplicate data. But in destination table 4 columns have primary key. How to handle the duplicate records in oldedb source.
What's the best way to write key values of records processed in my SSIS 2012 package to the log provider chosen?My SSIS package deactivates widgets as well as thingies. It was just released into production this week, runs daily, and we'd like to keep a close eye on what it's doing for a couple of weeks, by that I mean on any day be able to quickly see which thingies and widgets were deactivated that morning. It typically deactivates less than 5 widgets and thingies per day.
We could dig through the database to see which were deactivated, but that only works if somebody hasn't manually reactivated it since it was deactivated. We need a log. This is a temporary watch we're doing, so we don't want to write to a table or make make any significant package changes, such as adding new tasks.It seems like writing the 5-or-so deactivated thingy and widget key values to the log is the best way to watch this package. What's the most efficient way to do this? I'm hoping to avoid a new loop and script component with "Dts.Log" calls, but I don't know any other way.
I have an SSIS package that is creating an Excel worksheet and writing data to it. It works fine when i run it inside Visual Studio. But when it runs as a scheduled job it writes the header and no data. I turned on logging and the log even says it is writing the 10,456 rows that it should be.
But they are not showing up in the Excel document. The job is setup as 32 bit and writing to Excel 97-2003. The job ends normally and does not generate any type of messages that are out of the ordinary. This is running on SQL Server 2008r2.
I am trying to load a simple Excel file into a Database table and the SSIS Package is not loading any records beyond 3233 records. I am just surprised. I tried using the "IMEX=1" mentioned in some of the online resources but it didn't work. I am using an Excel Source, a Data Conversion Transformation and an OLEDB Destination in my package in SQL Server 2014 (which is pretty simple and straightforward).The Excel file I am trying to load can be found here.
And, here is my table structure.
CREATE TABLE [gov].[loan_limits]( [FIPS_State_Code] [varchar](3) NOT NULL, [FIPS_County_Code] [varchar](3) NOT NULL, [County_Name] [varchar](50) NOT NULL, [State] [varchar](2) NOT NULL, [CBSA_Number] [varchar](6) NOT NULL,
I have a stored proc that is returning the results I need for output to .txt file.
Is there a way in SSIS to commit 50K (or whatever number) row batches at a time or should I just handle this in the stored proc?
select * into #TempTable from SomeTable [WHILE LOOP] --throttle commit batches of 50K rowcount select * from #TempTable [END LOOP] drop table #TempTable
But If I'm doing this in SSIS, I can't drop the #temp table otherwise I have nothing to output right?
In my SSIS package I am looping multiple flat file to load data into target table. I have used one variable to get that filename. I have error log table which used to log the invalid record which come from various files.
All are working fine , except I want to log the filename also in my error log table. How can we use the package variable to assign the variable value in script component.so that I can map the output column to target table. I have created Filename column in script component in output column tab.
Suppose in my table i have 300 records. In that 300 records i want to update first 100 records with today's date. 101 to 200 records with yesterday's date and 201 to 300 records with tomorrow's date.
I want to achieve the following in (SSIS/SSDT for SQL 2012) -
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
Now, I want to merge the source data with target table -that means, if the records are already avaible in target, then ignore and if it does not available then INSERT.
This is the query i used but new records are not getting inserted.
MERGE #target T USING #source S ON S.SOURCE=T.Source WHEN NOT MATCHED BY TARGET THEN INSERT ( Source, Prefix ,tgt_patientcode ,tgt_patientdesc) VALUES ('Canada' , 'cn' , s.patientcode, s.patientcode);
I have two records in the source with information ID, RevisionID, Description, Region
There are two lookup files one with ID,Description amd other with ID, Region
I wish to update my two source records with performing lookup with these two files.To get the correct description and region data. How to do this in ssis DFT.
I have a transformation where final result set give me 25 rows of data. Now before I put into destination table, I need to add another column which will show how many total records we have. Like.
My dataset:
A 20 abc B 24 mnp c 44 apq
Now I need to add another column within my transformation before I store the result set to destination like this:
A 20 abc 3 b 24 mnp 3 c 44 apq 3
Here. new column gives count of total rows in our dataset which was 3.
How can I achieve this? Can I use derive column to this?
I have an Excel file which contains some data. I want to load that into a SQL server Table. Here are my conditions :
1. If the table doesn't have any matching records from the Excel file, then my DFT should load the data from that Excel to the Dest Table.
2. If the table has even one or more matching records, then the DFT should not process at all, instead I should send an email to the business stating that there are some matching records and hence the package is not process...ed.
P.S. If i use Lookup, I have two matching and non-matching output. which will process the non matching records into the table and matching can be redirected to any flat/Excel file. But i don't want to do this. I just want to lookup the Sql Server table and excel.
It'll be good if there is an additional option in the Lookup "Fail component on matching records".
if there is any way to accurately size a single server using SSIS. The server will be a virtual machine. The data being loaded will be approximately 200 MB per load with loading to a 150 GB database on a separate server.
I have scheduled SSIS package through Sql Agent and when I right click on job start job as step package runs successfully but when I schedule job it dosent run.
Can anyone help regarding the SQL server integration Services(SSIS), ETL We have requirement like this: We have Live Database( LIVE_DB ) and Reports Database (REP_DB) I want to trasfer the few tables data from LIVE_DB into the REP_DB for end of the day using SSIS If any new records are added, updated or deleted in LIVE_DB, these should reflect in the REP_DB, Our requirement is not to delete the old data, we should append or delete or insert the new transaction data in REP_DB.
Thanks in advance, if anyone help me in resolving this issue.
I have a maintenance plan which consist db full backup and log backup ( in two subplans), I execute both on SQL agent, and both failed.The DB Log Backup : DB FULL BACKUP LOG:
I need to group records and assign a setid to the group. I have atable with data that looks like thisColA ColB94015 0106594016 0106594015 0108594015 0108633383 0091232601 00912I need to create a resultset using just sql to look like thisColA ColB GRP94015 01065 194016 01065 194015 01085 194015 01086 133383 00912 232601 00912 2The tricky part is resolving the many to many issue. A value in ColAcan belong to multiple values in ColB and a value in ColB can havemultiple values in ColA.
I have a ssis package with an oledb connection using windows authentication. i want to understand when i promote this package to the server and add it to a job, then a user login to the server with sql server authentication and run this job. Which/what windows authentication this package gonna to use to connect to the server ?
I have installed VS community edition 2013 on a widows 7 PC. When I try to create a ssis package the ssis tool bar comes up empty.It just says "loading" on the panel .
Win 7 SP1 x64 PC. I installed SQL Server 2014 Dev Edition + Visual Studio 2015.
I'd like to create some basic ETL SSIS packages, and I worked very comfortably in 2008R2.
For 2014, I started with this tutorial:[URL]However, it says to go to Start->All Programs->Microsoft SQL Server->SQL Server Data Tools.
I did explicitly install SSDT when I installed VS2015. I also installed it separately. I see SSDT listed in Programs, and SSIS is running according to SQL Server Config Manager, and Services. Half of Microsoft's docs seem to be 2012 era, which is a shame because 2014 is out and it's nearly 2016...
how do I get to the GUI where I can design ETL packages?
We'll be using 2014 enterprise to populate some excel spreadsheets. We may not have the option of using ssrs so here is the question.
The excel spreadsheets have some pretty fancy heading structures, multiple tabs and in a few cases graphs that i'm sure are dependent on data sitting somewhere in the spreadsheet. The heading have variable info in them (eg FYxx where xx is a parameterized fiscal year, month names etc). Sometimes those headings have sub headings (with variable info) and so on.
Generally speaking how (if at all) do folks deal with this kind of excel challenge when limited to using ssis? I don't know if templates are going to be a good idea. I don't know if i'll be looking at a fair amount of c# etc code behind the scenes. I can be more specific depending on the feedback.
This is part of a conversion from 2 of the larger BI and statistical tools out there to the MS sql stack. Obviously with some shortcuts that we may wish we didn't take.
we have a table with xml column. This column has a large xml data . I am trying to use ssis to import xml from sql column (table a) to destination (another table).
steps which i did in ssis:
1. execute sql task:
fetch the xml column by query and store "full result set" into an object variable.
2. foreach loop:
select Ado enumerator option and select variable which has reset set of execute sql task. In variable mapping selected a new variable of type string.
when I run package I get below error:
"Error: ForEach Variable Mapping number 1 to variable "User::variable" cannot be applied".
Have Visual Studio 2008 R2 with SP 2 installed. Due to a merger we now have a MySQL database that we need to update from SSIS. Everything works except for the table insert or update. Would upgrading to SP 3 or SP 4 maybe useful with that?
We have installed the latest driver from MySQL. Have tried the ADO.Net and ODBC drivers with similar results when we try to update the database.
I have a ETL ( SSIS ) Process in which i am loading around 150 tables in each run. ( Truncate and Insert ). I have four packages each from different sources. ( Each package loads different tables and different numbers )These are run on weekly basis one after the other. Each package is taking around 60 to 90 minutes each. Now i want to track the progress of the ETL on my front End application.
We want this in two ways.
First Way : I need to show the user how much percent of ETL Process is completed
Second Way : I need to show the No of tables completed and how many rows have been completed in the ongoing table ( which is in process )
