I have to combine data from DB2 and SQL server and do some manipuation. I wanted to do union all and put in temp table for further manipulation. I created a temp table in control flow,
Then I was trying to use that temp table for destination but I can do see that in destination. I have to automate the package and do that everyday. I read some blogs but did not understand how they did it. I did set retainsameconnection to true. I did find this thread but i did not understand how it was done. URL....
I have two OBL DB sources, Then I have Union ALL and then OLE Destination in data flow.I have the temp table code in Execute sql task.
I have requirement to update/insert the DPID based on the address which are passed as an input values.There are more than one address at the same time and I configured to get the address from the query which are correct and output of the address values will be stored as system object variable.I am then passing the system object variable to for each loop container and I have configured the collection and variable mappings as a variable for each input value.
when I pass the value manually to the web service task it works correctly.When I pass it as a variable to web service task it doesn't return any value.I have a data flow task which converts the ouput from web service task using the xml source converts it to oledb destination.I don't see any rows being written to the target table.
Is it possible to access a Derrvied Column from an OLE-DB Command? I have to Update a Table with a join and i need from the source Table columns which have to be pivoted before i can use it in the update Command.
We run std 2008 r2. I'm trying out the commandtimeout property of an oledb source. I set it to 30 expecting 30 seconds. if connection and or execution exceed that threshold, will the pkg fail? Either way is there a way I can detect that the threshold was exceeded?
How do I add only new rows to a destination table (when copying a table from another database every night) ?Every night I am copying a number of tables from one database to another.I only want to insert news rows (that are not in the destination table, but are in the source table) to the destination table.I might normally drop the destination table and just copy over the whole table, but in this case rows can be deleted from the source table, but I want to keep these old rows in the destination table (to maintain history). So I only want to add in rows to the destination table that have been added to the source table since last time.I guess I could copy the whole of the source table to a temporary table in the warehouse, then use a T-SQL merge command to compare and just add new rows to the destination table- but suspect that this is not the best way.
Have an SSIS package running great in 2008R2. It generates several flat files based on inline database queries. The first step of the package inserts a record into a log stats table and the last step of the package updates this record with the package name, run time and execution status. Now I need to add the records counts for each flat file to the log table.
Is there a way I can update one field for run counts with each of the counts for each file. So the [run counts] table column would look something like:
file1: 43522 file2: 645367 file3: 7883
Is it possible to store the record counts and flat file names in variables then concat them at the end when updating this record?
Or, is a better way to just insert/update a new record for each flat file step and log the counts for that file for its own record?
In either case, how I can capture the file count and pass that to the update statement.
I have a requirement to take xml file, in case the number of column changes, it should not fail the package, rather it should load the data in destination table. Destination table could be altered separately depending on xml schema by the DB team in production.
I am using SSIS integration between two database. Both databases are sql server 2008. using many integration but getting problem in two only only two integration giving problem, both are executing perfectly and out put also not showing any error.
but destination table not inserted/updated anything.
first issue integration is using data flow task with oledb source and destination. second one is using execute task with for-eachloop container.
The only way to add a new column to an existing mapping that I know is to go to advanced editor and refresh. This however keeps only the default mapping (where the field names match), the rest is wiped out, so need to restore the mapping manually after that. Risky and annoying at the same time. Is there any alternative?
1. Does SSRS is J-Sox Compliant, an application must have audit trail feature. For Reporting printing, it should facilitate reports' data logging process.
2. Information like WHO and WHEN printed the report and WHAT data was viewed?
TABLE_NAME DESC CODE tab1 table1 A tab1 table1 B tab1 table1 C tab2 table2 D tab2 table2 E tab2 table2 G...
First column values are table names which are already exists in target database. Next two columns[Desc],[Code] data gets populate from CSV file to table.
In this scenario, how to load tab1 data into the same table in destination and so on.
Which way will be more standard to accomplish this task? If its a script task using C#, looking for clear script to identify a value changes in the first column.
My source has 2.2 million of records. I'm performing the incremental load.In the lookup transformation i used the destination table for the reference using Full cache mode.For the first time package executed successfully but when i executed the package second time, Suddenly Package hangs while running.Than i truncate the data from the destination table and restart the SQL Server Services.After doing all this i executed package again and it worked but when i executed package second time, again package hangs up .I have 8GB RAM and i5 2.5 GHz Processor laptop.
I have 5-6 table and wanna to make sure if I'm using any of them in my Packages and I do have 100 Packages.shortest way to search these tables in Packages.
I got a problem with a user who needs to log on to the integration services. The user ist is "sysadmin" on the SQL Server and I granted him rights in the DCOM configuration for MSSQL Integration Services (remote and local log-on and remote and local execute and start). But if the user trys to log-on to the integration services it says "Access denied", why.
I have a requirement to load multiple flat files in target table .
I have created the package which used to load files into target table using For each loop container.
But now requirement has been changed now I have to take only those files from table where status="Success" and max JobId. By the query I am to get those records which need to load into table.
Below query I am using to get the files which need to load.
select [JobLogKey],[SrcNm],[DestNm] FROM [ConfigRep].[dbo].[JobLog] Where [JobId]= (Select Max(cast([JobId] as Int)) Jobid FROM [ConfigRep].[dbo].[JobLog] Where [JobStat]='Success')
I have to load using above 2 files which are under SrcNm. I have created one variable called FileToLoad as Object and mapping to result set of above query. I have create JobId,SrcNm and DestNm variable to catch the record at every loop. I have created 2 For each Loop container
Below screen shot of outer Foreach loop. Till here Its working fine. Inner for each loop container not executing any task under that. How to get it done.
I'm using SQL Srv '12. Have ADW'12 and ADWDW'12 DBs installed.I created a new SSIS project. Two project level OLEDB con mngers (One for each OLEDB DB).Dragged and dropped a new DFT.Inside the DFT, I'm using Source Assistant to connect to the ADW'12 OLEDB source.
We run std 2008 r2. When I deploy and run a pkg from the catalog, how can I get that flat file system log we always instructed ssis to write to when we ran from the command line? I believe it was the /L param . Not sure at this point if i'll use sql agent or somehow employ task scheduler to kick off the pkg.
I would like to fire a pre execution event, grab the name of the stored procedure (source of the sql task), insert a record with the name and datetime, and then fire a post event that would update the record with a modified dated.
What is the best way to capture the source value name in the execute sql task.
I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.
But i got the below error:
Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow TaSK: There were errors during task validation.
