Integration Services :: Converting String To Date

Nov 24, 2015

I am trying to convert a string to date in a variable. But I am not able to do so. the string format is "2015-11-24".

I am also attaching a screenshot of the error ....

View 5 Replies


ADVERTISEMENT

Integration Services :: Why SSIS Is Converting ID As Unicode String

Jul 28, 2015

I am using OLE DB source to extract data from Oracle. I have query (sample) like below, but SSIS is converting ID as Unicode String [DT_WSTR]. Why is that? and how to avoid this?

SELECT
1 AS ID
FROM 
ORACLE_TABLE

View 3 Replies View Related

Integration Services :: Converting A String Percent Value To Decimal

Oct 12, 2015

I am reading a data source where all data in a given column is held as a string containing a percent value with 2 decimal points:

03.52%
12.32%
92.10%
80.05%
27.92%
100.00%
[...]
etc...

I need to convert these into decimal values with up to four decimal points, like this:
0.352
0.1232
0.9210
0.8005
0.2792
1.0000

I am trying to use the derived column editor but since I am fairly new to this, I am getting my wires crossed. c

1. Remove the % sign from the string -- not sure if I should use TRIM, or REPLACE
2. Divide the value by 100 -- but don't I need to do some sort of type casting first?
3. Do a cast to convert whatever I got into the correct decimals -- perhaps this isn't required if I did step 2 as a typecast to decimals already?

View 6 Replies View Related

Integration Services :: Converting String Variable To Integer In SSIS

May 20, 2015

I am trying to convert a string variable to integer in SSIS using the expression task.

@[User::Nummer] = (DT_I4) @[User::Name]

But I get an error that the conversion from (DT_WSTR) to (DT_I4) is not possible!!

View 2 Replies View Related

Integration Services :: Errors Converting Date Time Formats With SSIS

Jul 10, 2015

I am getting below errors when I try to import data from csv format to a sqlserver table.The csv file has date column that has date with format: 7/10/2015  1:18:39 PM and the sql server is using datetime not null for that field in the table.

[OLE DB Destination [90]] Error: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 10.0"  Hresult: 0x80004005  Description: "Invalid date format".

[OLE DB Destination [90]] Error: There was an error with input column "Date" (138) on input "OLE DB Destination Input" (103). The column status returned was: "Conversion failed because the data value overflowed the specified type.".

View 3 Replies View Related

Integration Services :: How To Derive String To Date-time

Jul 15, 2015

How to derived string to date-time (dd/mm/yyyy)

Input Date :

Start Date 
15/06/2015
30/06/2015
NULL
2015/06/24

Some date are in format dd/mm/yyyy I want to keep them as it is , but I want to convert the NULL one and 2015/06/24 to 24/06/2015.

View 3 Replies View Related

Integration Services :: How To Convert Date Column To A String

Nov 11, 2015

I have a column value as '201303' for the date. I need to get the output into two columns as 2013 and Mar. The date column is a integer one.

How can I convert this date column in a Data Convertion task.

View 6 Replies View Related

Integration Services :: SSIS Data Conversion From STRING TO DATE

Nov 30, 2015

I am trying to upload data from CSV to Sql table. I have a column as 'arrived_date' value '13:45' etc and while trying to load data i am getting error as "data conversion failed ,truncation may occur while loading data". In flat file connection this column datatype is string but in my table datatype is as time(). There is a error with conversion. I tried to change data type in advanced editor but no use. Using data conversion after flatfile makes my error disappear but it is giving error right at the file not even going through from file?

View 10 Replies View Related

Integration Services :: CDC Source Transformation And Converting Non-Unicode To Unicode String SSIS

May 6, 2015

In my package , I am used CDC Source transformation and received the Net changes then insert into Destination. But whatever Data coming from CDC source data type Varchar value needs to Converting Non Unicode string to Unicode string SSIS. So used Data conversion transformation to achieved this.  I need to achieve this without data conversion.

View 3 Replies View Related

Integration Services :: SSIS 2012 Lookup Transform Converts Date Field To String

Jul 30, 2015

We are using lookup transformation in SSIS 2012. The lookup transformation queries a table with two date columns. When we hover the mouse over the two columns in the 'columns' tab of the lookup transformation editor, the two columns show as DT_WSTR instead of DT_DBDATE. This causes the SSIS package to fail due to data type mismatch.A similar abandoned thread is available at: URL....

View 2 Replies View Related

Date Function - Conversion Failed When Converting Date And / Or Time From Character String

Mar 18, 2014

I have the following

Column Name : [Converted Date]
Data Type : varchar(50)

When I try and do month around the [Converted Date] I get the following error message

“Msg 241, Level 16, State 1, Line 2
Conversion failed when converting date and/or time from character string.”

My Query is

SELECT
month([Created Date])
FROM [FDMS_PartnerReporting].[Staging].[Salesforce_MarketingReporting]

View 7 Replies View Related

Transact SQL :: Due Date - Conversion Failed When Converting Date And / Or Time From Character String

Nov 16, 2015

SELECT * ,[Due]
  FROM [Events]
 Where Due >= getdate() +90

This returns the error: Conversion failed when converting date and/or time from character string

Why would this be? How to cast or convert this so that it will work? 

View 24 Replies View Related

Converting String To Date

Aug 12, 2005

Hello,I try to convert a pseudo datetime string into a date. In Oracle I can doto_date( MyDate, 'yyyymmddhh24miss' ); how I can do this with MS SQL ?thanks and regardsMark

View 2 Replies View Related

Converting String To Date Format

Jun 12, 2008

I am trying to import a txt file that has a string for it's date. How do I change it over in the import wizard I've tried going to advance then changing from string to date or date time but I get an error.

View 14 Replies View Related

Converting String To Date In SSIS

Jan 29, 2007

I am very new to SSIS though I have written hundreds of SQL 2000 dts' with all kinds of active scripts doing all kinds of things. I am now trying to convert them to SSIS and since scripts don't come through the migrator I am doing them by hand once again. I have the package created, but one of the input fields on the text file is YYYYMMDD , but the database field it is going into is a datetime so I need to convert it to a valid date format so that the conversion will take place. I tried data conversion task but that doesn't work, now I'm assuming I need to use the derived column, but not sure and don't have a clue how to use that, can anyone help? Thanks bostonrose

View 2 Replies View Related

Problems While Converting String To Date.

Oct 2, 2006

Hi Guys,

Source Column Data type: Varchar

Destination Data Type: smalldatetime

We have 2 columns effective_Date and Expiration_Date:

the format of data in these columns is not consistent.

Sample values:

1/23/2006

Tuesday, June 21, 2005

1/0/1900

8-Mar-06,

NULL

Now, i want to convert to a standard date format like "2006-03-08 00:00:00".

please let me know the steps to do..

Thanks in Advance.

Sri

View 7 Replies View Related

Integration Services :: Converting Type Text To XML

Jun 26, 2015

I have a csv file and I would like to load this file by SSIS in SQL Server.

One column of this file contains xml infos (it is about 60000 charachter), and I would like to have an xml column in Table in SQL Server.

From here the only ssis types, which able to contain so much character are DT_NTEXT and DT_TEXT.

If I want to have xml type in the target table in sql server, these both DT_NTEXT and DT_TEXT should be converted to DT_WSTR.

The Problem is: DT_WSTR can only contains 4000 charcters. In my situation with this infos, I can't have an xml column in target table in sql server.

View 2 Replies View Related

Integration Services :: Converting Datatype In SSIS

Jun 19, 2015

I'm editing an SSIS package. The source column has datatype float and the data is stored like 1,2 instead of 1.2. To change this into a period instead of comma there is a derived column step in the ssis package. The expression in this derived column step to change this goes as:<o:p></o:p> (DT_STR ,32,1 252)(REPLACE((DT_STR,32,1252)SUBSCHAAL_SCORE,",","."))<o:p></o:p>

where SUBSCHAAL_SCORE is the name of the column. As you see the data is converted into a string. I need it to be converted into a numeric datatype (18,6) instead of string/varchar but it must also handle the first issue with changing the comma into a period. <o:p></o:p>

View 3 Replies View Related

Converting Date And / Or Time From Character String

Oct 22, 2013

My Query is as shown below

Declare @FROMDATE DATETIME
Declare @THRUDATE DATETIME
Declare @Parm Varchar(250)
set @FROMDATE = '09/25/2013'
set @THRUDATE = '09/28/2013'
set @Parm = 'FROMDATE=' + @FROMDATE + ';THRUDATE=' + @THRUDATE

I am getting an error at above line saying that

Conversion failed when converting date and/or time from character string.

View 8 Replies View Related

Converting String Parameter Values To Date

Mar 11, 2008



Hi,

I have a calendar parameter in one of my reports. The values of the calendar are of the form 'yyyy-mm-dd hh:mms'. And they are string values.

Now when I generate the report I have a textbox that takes the parameter label (e.g., parameter!calendar.label). However, I would like to format (or trim) the label as just 'yyyy-mm-dd'. Does anyone know how I can do this? I tried to change the parameter value format to datetime but this just throws an invalid datatype error...

cheers,
Al

View 10 Replies View Related

Integration Services :: Error Converting Nvarchar (512) To Varbinary (max)

Aug 27, 2015

I am using rowVersion to detect rows that need to be re-extracted for my ETL.  The first step in the ETL is to get MIN_ACTIVE_ROWVERSION() from the database, as well as the rowVersion from the last successful ETL run.  Both of these values are saved in variables in SSIS.  Since SSIS doesn't have an associated data type, these values are converted to nvarchar(512) before getting sent to SSIS.  

I'm now trying to create a stored procedure to grab the data out of the source system.  The sproc takes RowVersionMin and RowVersionMax as input parameters.  Those parameters are then converted to varbinary(max), and I use them in a query to select the appropriate rows.

When I run the sproc in SSMS, it runs without a problem.  However, when I try to use the sproc as a data source in SSIS, I get the following error: "Error converting data type nvarchar to varbinary". Why SSIS has a problem with this, but SSMS does not?  The sproc code looks like this:

ALTER PROCEDURE [dbo].[dw_DimComment_DataLoad]
@RunType varchar(3),
@RowVersionMin nvarchar(512),
@RowVersionMax nvarchar(512)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from

[Code] ....

View 2 Replies View Related

Integration Services :: SSIS Converting Dates From Excel

May 20, 2015

I have a SSIS package which is reading from an Excel file. 

The Excel is created from a report from another system and sometimes the date of birth formats as a Date and sometimes as string.

I've added a data viewer so I can see how the columns are read as soon as SSIS reads the file. 

When the cell in Excel is set as text its read correctly - I can then convert to a date as necessary

When the cell in Excel is set as date its read in US format! i.e. if it was 01/13/2014 in excel its read as 13/01/2014

How can I get round this? Its not an option to manually force the column to be text once exported from the system as my package picks this up automatically.

I have tried 

-Regedit set typeguessrows = 0
-IMEX = 1 in connection string
-Set LocaleID = UK in the data flow task to read from Excel

View 5 Replies View Related

Converting String Date To Datetime - Missing 0 In Year

Nov 25, 2014

I have a table with a 25,000 records with fields like this:

Jan 1 196
Jun 29 195
Jan 22 196
Sep 17 195
Mar 22 193
Nov 3 197

Is there a quick way to add the zero onto the year, before I convert them into datetime format?

View 3 Replies View Related

Converting A Date In The Form Of A String To A Datetime Format

Sep 29, 2006

Hi,

I'm writing some SQL and want to convert the following expression into a date format in the SELECT list:

'01/'&Month(OrderDate)&'/'&Year(OrderDate)

Basically, I want to look at each order date, convert that date to the first of that month and GROUP BY this expression.

There is a CONVERT function, but I'm new to all this and can't seem to get it to work.

Any help would be gratefully received!

Cheers!

Keith

View 8 Replies View Related

Integration Services :: Converting Stored Procedure To Inline Query

May 30, 2015

I have a stored proc that is being executed from an OLE DB Source component in my Data Flow. Takes one input parm, has several variables declared within, a derived table which is used in a join and all within a try catch block with transaction handling. No updates, just returning data, works great, except now I have been asked to replace these stored procs with inline queries.

ALTER PROCEDURE [dbo].[usp_Get_Test]
(
@numberOfMonthsint
)
AS
BEGIN
SET NOCOUNT ON
set transaction isolation level read uncommitted

[Code] ....

The problems I have run into so far are...

SQL command text in OLE DB Source Editor does not like:
- TRY/CATCH block
- Will not let me use my input parm (@numberOfMonths int)
- When I hard code in my input parm (select   @BeginDate = dateadd(MONTH, -1, GETDATE())) I can parse query and run the step but no results are returned. So I am let to assume that it does not like the @TESTY derived table.

The query here as a sample has had pivots removed as well, but research suggests this should be an issue in the SQL command text.

Also, I know not even to try the Build Query... cause it will complain about any variable declarations (i.e., declare @BeginDate datetime).

For instance, can I pull this off with an Execute SQL Task? The problem is I don't see this available in the toolbox for the Data Flow. 

Also, would my error handling be done in the Event Handlers tab now and if so, is there a good example of this?

View 3 Replies View Related

Converting Date From String To Datetime In Data Transfer Task

Jul 13, 2006

The source is a flat file with a column where dates are stored as: 07/12/2006 11:35am. In some cases the column is blank.

I need to import this into a table with a datetime column. In the data flow task, I get the error that conversion b/w String and DB_Timestamp is not allowed. First question is why does SSIS think its a DB_Timestamp column? Shouldnt it be DB_Date or DB_Time. Anyway, when I add a Data Conversion Task in the Data Flow, and cast to the source column to either DB_TimeStamp, DB_Date or DB_Time I get an error.

Please help. What am I doing wrong.



Asim.

View 7 Replies View Related

Integration Services :: How To Load Multiple Date Format Column Date Into Table Using SSIS

Jun 15, 2015

i have a excel file in which i have a date column it having the below date formats below 

Install Date

20140721

31.07.2014

07.04.2015

20150108

20140811

20150216

7/21/2014

11.08.2014

07.08.2014

So using SSIS how we would load this date column into the table into one format like dd/mm/yyyy or any single date format

View 6 Replies View Related

Integration Services :: Julian Date YYYYDDD To Gregorian Date

Sep 23, 2015

I am trying to convert Julian Date YYYYDDD format to Gregorian Date.

Able to convert using the SQL Query but not sure how to implement in SSIS.

Script: 
SELECT DATEADD(yy,'2011228'/1000-1900,'2011228'-('2011228'/1000*1000)-1) AS [Date]

Let me know how to convert this function into SSIS. 

View 2 Replies View Related

CURSOR - Conversion Failed When Converting Date And / Or Time From Character String

May 15, 2015

This is my code and I don't know why this error keeps coming out : PS : I did cursor to execute query.Th error showed is bold:

DECLARE RegCreatedDate CURSOR FOR
SELECT DISTINCT (CONVERT(NVARCHAR,CreatedDate,103)) 
FROM CA_Registration WHERE Month(CreatedDate)= @paMonthIn AND YEAR(CreatedDate)=@paYearIn
OPEN RegCreatedDate
FETCH NEXT FROM RegCreatedDate INTO @RegCreatedDate
WHILE @@FETCH_STATUS = 0

[Code] ....

View 9 Replies View Related

Select Only - Conversion Failed When Converting Date And / Or Time From Character String

Sep 4, 2015

I'm trying to select only July from show_held but I keep on getting the error message saying:

Conversion failed when converting date and/or time from character string.

I get error message after I write this code:

ANDshow.show_held = '&July&'

As you can see from the below code, How do I select July from times_held_in_July?

SELECTevent_name,
DATENAME (MONTH, show_held) AS times_held_in_July
FROMevent,
show
WHEREevent.show_id = show.show_id

Result:

event_name times_held_in_July
DressageJuly
Jumping July
Led in July
Led in September
Led in May
DressageApril
DressageJuly
Flag and PoleJuly
SELECTevent_name,
DATENAME (MONTH, show_held) AS times_held_in_July
FROMevent,
show
WHEREevent.show_id = show.show_id
ANDshow.show_held = '&July&'

Result:

Msg 241, Level 16, State 1, Line 24

Conversion failed when converting date and/or time from character string.

View 6 Replies View Related

DB Design :: Conversion Failed When Converting Date And / Or Time From Character String

Sep 14, 2015

BEGIN TRAN;
INSERT INTO [dbo].[QuestManualProcess]
           ([ProcessFromDate]
           ,[LastProcessedFileDateStamp]
           ,[ProcessedOnDate]
           
[code]....

Conversion failed when converting date and/or time from character string/

View 4 Replies View Related

Record Count - Conversion Failed When Converting Date And / Or Time From Character String

Sep 26, 2014

I am trying to write a stored procedure that loops through the list of user tables, gets the record count for each one and write a record to an audit table with DATE, TABLENAME, RECORDCOUNT.I keep getting an error "Conversion failed when converting date and/or time from character string".Here is the script...

DECLARE @table nvarchar(500)
DECLARE @sql nvarchar(520)
DECLARE CursorSelect CURSOR FOR
select table_name from INFORMATION_SCHEMA.tables where table_name not like 'sys%' order by table_name

[code]....

View 2 Replies View Related

Transact SQL :: Error - Conversion Failed When Converting Date And / Or Time From Character String

Nov 16, 2015

I've imported a CSV file into a table in SQL Server 2012. It's a large file, 140,000+ rows, so I couldn't covert it to Excel first to preserve the date format due to Excel's row limit. In the CSV file, there were 3 column with date data in "31-Aug-09" format, and the import automatically transformed these in "31AUG09" format (varchar(50)) in SQL Server.  Now I need to convert these 3 columns from varchar to datetime so I could work with them in date format.

I've tried several things,e.g,

select
convert(datetime,
right(admdate,4)+left(admdate,2)+substring(admdate,3,3))

or

select
convert(datetime,
substring(admdate,6,4)+substring(admdate,1,2)+substring(admdate,3,3))

but keep getting the same error message (Msg 241) "Conversion failed when converting date and/or time from character string".

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved