2) NG20150623.txt 2015-06-23 00:00:00.000 NG 20150701 43
3) HO20150624.txt 2015-06-24 00:00:00.000 HO 20150701 43 And so on..
But the requirement is to have a dynamic query where we can have more number of Codes or less number of codes and similarly the package should generate dynamic text files, one .txt file per code. What is the best way to create a package which can meet the above requirement?
Create a SSIS package for following scenario.I have one excel file which will contain 10 records for Monday, 12 records for Tuesday, 7 on Wed, no records on Thursday so if records are there I get mail if no records are there I didn't get mail daily.
I am new to SSIS. I have a requirement that from a flat file need to import the data into SQL Server DB(SQl Server2008r2).
1.When the file doesn't found in dir need to send a mail. 2.error reading And writing ,on which record the error occurred and capture the error details and need to send mail. 3. In success also need to send a mail.
I've been working on an SSIS package trying to load some data and the archive sequence is faulty. I've been trying to load a few tables created in a previous sequence into a local archive file and I've been getting the error "Could not find a part of the path."
The results aren't telling me what it's finding last and so I don't know where to start.
And the source DOES have data in it. It's something between the source and the destination.
I am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying in SSISDB is running for infinite time. Is it a permission issue?
After developing SSIS Package (.dtsx file) if I need to deploy to all environments dynamically, then how can I create .dts config file and mention properties in it ?
I have a very simply package using an Excel connection to an XLSX file. It's a straight read of the file and import onto a table.
The package works fine in Visual Studio 2008 development and also runs fine when executing on the (server I copied it to) under Integration Services.
However, under a SQL Agent, the package (32-bit is checked) can not acquire the connection to an excel file. I use UNC pathing to the file. I've read other posts about similar problems and tried various scheduling options (including Owner of job).
I even tried a to trigger it with a command-line which did not work:
"C:Program Files (x86)Microsoft SQL Server100DTSBinnDTEXEC.exe" /sq "our packagesMy_XLSX_File_Import" /SERVER myserver /X86 /CHECKPOINTING OFF /REPORTING E
All errors are: "DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0209302."
I want to design an SSIS package that loads data from files into SQL Server and I want to automate the process. My major issue is that the source file doesnt come in the same format. Some times I comes in either .csv , .xls , .txt or even .rpt file format. Is there a way I can write a code that checks through my folder and based on the available format on the folder it loads the value in ssis.
I am created a SSIS package to export data. I am exporting query data to a flat file to a different server. I tried to use the UNC path and it failed saying could not access the file. How can I create a SSIS package to export data from one server to another?
I have an SSIS package, that move file from one folder (Download) to another folder (Working), where it will be processed and passed to (Processed) folder. The folder (Working) is created at run time and deleted after finishing process. I ran this package using SQL Server Agent (I created a sql job). My problem is that the package fails to move the file from Download to Working, Although it can move it to other folders (say I skipped Working and move it directly to the already-created folder "Processed").
I traced the problem and found the error "Access is denied", when run the package without Agent (double click). I provided the necessary permissions to all levels of folders to the user XX, which I made it the (SQL Server Agent Service Account) as well as the Job Owner. By this, the package executes successfully (again by double clicking it), but with Agent it FAILS.
Why Agent cannot move the file to the run-time-created folder (Working) ?
We have a main package which is calling multiple other packages. The the child packages uses parent package variables and which we are configuring using configuration file while installation of the package. Here we need to set each path while installation because there are many variables using the same path with the different file names(Different files stored in same Folder). We want to get the main path and then if we use relative path in other variables then we need not to assign all the variable paths while installation.
How to we can get the Application path in Integration Services Package(Script Task)?
I have an ssis package that moves data from a new csv file in a share location to sql server database table. However I need to get this agent job triggered whenever a new csv file gets added to the shared location.
What is a best strategy to do this keeping in mind that while package is running and two new csv files come in and package shd copy data from both the files.
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
I have a main package calling another package through the Execute Package task.
The main package is passing the Job Instance id as a parameter to the other package.
When i execute the Execute Package task the concerned package is not showing any execution progress.However when i set the Delay validation Property to True , I saw that the package executed instantly and the desired result was obtained.
I am not sure how the Delay Validation property worked for the cause , as in my package I had no scenario of a temp table being called or any other temporary variables being used which needed a Delay Validation.
I am working with SQL Server 2012. I have deployed a SSIS project that has 2 packages in it. The package connection manager (Test) uses an expression to evaluate one of the Project parameter value (TestConnectionString) to set its ConnectionString property.
This works fine in a Dev environment. However when deployed to UAT, it keeps failing with the error:
PackageExport:Error: The result of the expression "@[$Project::TestConnectionString]" on property "Package.Connections[Test].Properties [ConnectionString]" cannot be written to the property. The expression was evaluated, but cannot be set on the property.
I can not seem to find what the issue could be. I have come across [URL] .... where it says: "If the package contains project parameters, the package execution may fail." but offers no solution.
I want to achieve the following in (SSIS/SSDT for SQL 2012) -
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
Win 7 SP1 x64 PC. I installed SQL Server 2014 Dev Edition + Visual Studio 2015.
I'd like to create some basic ETL SSIS packages, and I worked very comfortably in 2008R2.
For 2014, I started with this tutorial:[URL]However, it says to go to Start->All Programs->Microsoft SQL Server->SQL Server Data Tools.
I did explicitly install SSDT when I installed VS2015. I also installed it separately. I see SSDT listed in Programs, and SSIS is running according to SQL Server Config Manager, and Services. Half of Microsoft's docs seem to be 2012 era, which is a shame because 2014 is out and it's nearly 2016...
how do I get to the GUI where I can design ETL packages?
The attached image below shows the steps and its set up to fail if not successful.However there was a metadata validation issue in step one (underlying database field had changed), yet the job kept emailing stating it was successful.It appears to have just carried on with the other steps despite step one failing.
I have OLE Db data source (SQL Server 2008) with 5 rows. One of the column in claimID. Another data source is IBM DB2 Iseries database. The table in DB2 has 93 million rows. I need to get only rows from DB2 table where ClaimID matces to OLE DB datasource dataset. In fact its just inner join but in two different serves. How do I create new dataset from these two tables in SSIS. I tried using Lookup transformation. I cannot use OLE DB as datasource for DB2.
We have 6 SSIS packages which populates different sets of table by reading different set of excel file.We need to have a master SSIS package which will have the configuration (say xml) which consists of database connection details and file path details of child packages.what will the best way to achieve the desire results.
Package 1 use File x package 2 use File y package 3 use File z .... package 6 use File a
The parent ssis package will have xml file as configuration which will store the all the six different file details for child packages along with database connection string.Is the above option feasible . or what approach will be the best possible way to achieve the results.Since the Triggering of SSIS package (Master SSIS package) will be from SQL Job
I have created a package using SSDT2012 studio and it is failed to deploy under sql server 2012 sp1.Data inserting into sharepoint from sql server 2008 r2 database.The error says:The package failed to load due to error 0xC0010014.
I have a table is SQL server database A that is my source. I have another database B which is accessed via webservice call.(its a CRM server basically). My intention is to transfer data from A to B while B is accessible only via web service. I need to update existing one and create the missing one.
Currently I am using script component, and on every insertion of a row, i call the webservice to check if the record exist or not. If it exist I update it else create it using webservice call itself.
All this happen in Input0_ProcessInputRow(Input0Buffer Row) function.
Now this method is making 2n webserive call which is making the performance very slow.
I want to optimize the approach. Is there a way where I can retrieve whole set of rows in source table in preexecute(), filter it and store it in a List. This way, i just need to check the list a perform update ro create accordingly preventing my webservice call.
How to optimize this or even some better approach?
Its actually a CRM server and I am trying to update and create contacts in CRM sync with a database.
