I am loading data from a SQL server source table to oracle destination table and data type on both the tables are same but range is not same VARCHAR2(50) NOT NULL in oracle and sql data type is varchar(200). But when trying to load the data from TABLE SQL to TABLE Oracle i'm getting the following error:
View 6 RepliesI have to perform several data checks before loading data into target table. For example I am having 1 flat file with below column
Id Name Age
Int Varchar(100) Int
My requirement is to create package, checks will be performed on each record, column of the files. Any records which failed the checks considered as error records and will be written to the exception table.
I have created a SSIS package that runs several reports exporting the file output to a shared directory. Then I email these files as attachments to an email group. I got everything working so far. But when I checked the email there are only some of the attachments (3 out of 6 files).I have created a variable that uses an expression to concatenate several filenames and their paths separated with a "|". When I evaluate the expression it list all six files. When I use the variable in an expression when assigning the "FileAttachments" property in the Expressions tab in the Send Mail Task editor and I evaluate the expression, it only shows 3 out of the 6 files.
Each file name and path is less than 100 characters. Why is this task only grabbing 3 out of the 6 files. If I check the shared directory all 6 files are there. Also, there are two paths in the package that input into the Send Mail Task each creating a different set of report files. Only one of the paths files are getting attached. The connectors to the Send Mail Task are set as Evaluation operation: "Constraint" and the Value: "Completion". Under Multiple constraints I have selected "Logical AND, All constraints must evaluate to True".
I have package which pulls data from db table and creates a excel file extract.The flow is like this - A excel file template sits in the input folder folder for processing .The package starts by dropping excel sheet in the excel(which is clearing any data and columns available) once that is done it has script task which creates a new columns for the sheet and gives a sheet name as well .Then a execute sql task runs and pumps data into a table which serves as a source for the excel extract process .The excel extract process involves pulling data from the table and doing data conversion before it moves it into the oledb destination (excel file on file server).When I run the package I go and see that data is pushed down . I see top rows say 100 are empty and data appears after say 100 rows .
I tried deleting excel file and replacing with new one empty with columns and sheet name only but still it doesnt work?I am trying to understand what is making ssis behave like this and what can I do overcome the problem ?I read on google that we need to bring in file system task will move a template to working directory which is input folder but I dont want it to incorporate that logic as we need to push this package to production ASAP with very minimal change.
I need to insert data into Header & Detail table. As shown in the below xml,
RecordID is identity-column and incremented by 1, after new record is saved into Header table. Need to assign the same recordID for the detail also.
Expecting output should be like as shown below:
How can we accomplish this requirement.
Hi,
I'm using SQL 2008 Februar CTP and trying to use SSIS for Data Source as described in http://msdn2.microsoft.com/en-us/library/ms159215(SQL.100).aspx.
I've created SSIS package and preformed steps described in http://msdn2.microsoft.com/en-us/library/ms345250(SQL.100).aspx (after fixing version to 10.0.0.0).
Now I got next error when trying to add SSIS DataSource (in Report Designer - Visual Studio):
Error messageThe data extension SSIS could not be loaded.
Please help.
Matej
I am looking for solution for "Communication link failure" since many months in google but no luck, am running an SSIS package to load data. job failing many times with error 'Communication link failure', searched every where but found nothing.
Below is the complete error description when job failed.
OS - Windows server 2008 R2 Enterprise Edition
RAM - 198GB
SQL server 2008 R2 Enterprise Edition and error description is below,
Started: 6:22:40 AM Error: 2015-08-19 18:50:32.70 Code: 0xC0202009
Source: Data Flow Task Lookup [193]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80004005. An OLE DB record is available.
[Code] ....
I have requirement like to develop dynamic package for inserting data from flat file to table.
Find below points for more clarification :--
1) if I changed the flat file values and name in source variable AND the table name should be also changed based on variable value .
2) it should dynamically mapped with column values with source file as we have to insert data in target table.
See below diagram for more clarification.
When I am trying to insert to data from SQL ssis package to SharePoint list people or group column I am getting below error.[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SharePoint List Destination" (25) failed with error code 0x80131500 while processing input "Component Input" (34). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
View 8 Replies View RelatedI am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying in SSISDB is running for infinite time. Is it a permission issue?
View 7 Replies View RelatedI want to achieve the following in (SSIS/SSDT for SQL 2012) -
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
Win 7 SP1 x64 PC. I installed SQL Server 2014 Dev Edition + Visual Studio 2015.
I'd like to create some basic ETL SSIS packages, and I worked very comfortably in 2008R2.
For 2014, I started with this tutorial:[URL]However, it says to go to Start->All Programs->Microsoft SQL Server->SQL Server Data Tools.
I did explicitly install SSDT when I installed VS2015. I also installed it separately. I see SSDT listed in Programs, and SSIS is running according to SQL Server Config Manager, and Services. Half of Microsoft's docs seem to be 2012 era, which is a shame because 2014 is out and it's nearly 2016...
how do I get to the GUI where I can design ETL packages?
The attached image below shows the steps and its set up to fail if not successful.However there was a metadata validation issue in step one (underlying database field had changed), yet the job kept emailing stating it was successful.It appears to have just carried on with the other steps despite step one failing.
View 9 Replies View RelatedCreate SSIS package for the below output:
Table
Eno ename Eloc Edept
1 Sid Pune 101,201,301,401,501,601
Output:
Eno ename Eloc Edept
1 Sid Pune 101
1 Sid Pune 201
1 Sid Pune 301
1 Sid Pune 401
1 Sid Pune 501
1 Sid Pune 601
Create a SSIS package for following scenario.I have one excel file which will contain 10 records for Monday, 12 records for Tuesday, 7 on Wed, no records on Thursday so if records are there I get mail if no records are there I didn't get mail daily.
View 2 Replies View RelatedLooking for code for .Bat file to run ssis package and i want to run it from Tidal.
View 8 Replies View RelatedWe have 6 SSIS packages which populates different sets of table by reading different set of excel file.We need to have a master SSIS package which will have the configuration (say xml) which consists of database connection details and file path details of child packages.what will the best way to achieve the desire results.
Package 1 use File x
package 2 use File y
package 3 use File z
....
package 6 use File a
The parent ssis package will have xml file as configuration which will store the all the six different file details for child packages along with database connection string.Is the above option feasible . or what approach will be the best possible way to achieve the results.Since the Triggering of SSIS package (Master SSIS package) will be from SQL Job
I am new to SSIS. I have a requirement that from a flat file need to import the data into SQL Server DB(SQl Server2008r2).
1.When the file doesn't found in dir need to send a mail.
2.error reading And writing ,on which record the error occurred and capture the error details and need to send mail.
3. In success also need to send a mail.
I have a SSIS package in which i will download the files through FTP from main server to my local server. The file names will be like as follows:
''EYE0001_20150428_0805_INV.TXT''
''EYE0001_20150428_0805_SL.TXT''
''EYE0001_20150428_0805_SV.TXT''
''EYE0002_20150428_0805_INV.TXT''
''EYE0002_20150428_0805_SL.TXT''
''EYE0002_20150428_0805_SV.TXT''
After the download is over from the server to my local server.i will manually rename the files into like this as below,
''EYE0001_20150429_0805_INV.TXT''
''EYE0001_20150429_0805_SL.TXT''
''EYE0001_20150429_0805_SV.TXT''
''EYE0002_20150429_0805_INV.TXT''
''EYE0002_20150429_0805_SL.TXT''
''EYE0002_20150429_0805_SV.TXT''
SO i need to automate this files renaming process through ssis package.
I have created a package using SSDT2012 studio and it is failed to deploy under sql server 2012 sp1.Data inserting into sharepoint from sql server 2008 r2 database.The error says:The package failed to load due to error 0xC0010014.
View 9 Replies View RelatedI have a table is SQL server database A that is my source. I have another database B which is accessed via webservice call.(its a CRM server basically). My intention is to transfer data from A to B while B is accessible only via web service. I need to update existing one and create the missing one.
Currently I am using script component, and on every insertion of a row, i call the webservice to check if the record exist or not. If it exist I update it else create it using webservice call itself.
All this happen in Input0_ProcessInputRow(Input0Buffer Row) function.
Now this method is making 2n webserive call which is making the performance very slow.
I want to optimize the approach. Is there a way where I can retrieve whole set of rows in source table in preexecute(), filter it and store it in a List. This way, i just need to check the list a perform update ro create accordingly preventing my webservice call.
How to optimize this or even some better approach?
Its actually a CRM server and I am trying to update and create contacts in CRM sync with a database.
What is the best approach to run SSIS package (SQL Server 2008/2012/2014) automatically when it fails?
View 5 Replies View RelatedI am developing one SSIS package where I bring some details from DWH and insert ii to a table in SQL Server.
But i am getting the error like - The OLE DB provider used by the OLE DB adapter cannot convert between types "DT_I4" and "DT_GUID".
After developing SSIS Package (.dtsx file) if I need to deploy to all environments dynamically, then how can I create .dts config file and mention properties in it ?
View 6 Replies View RelatedHow do we connect and get data from SAP database using SSIS 2012/2014.Currently we are extracting data using WebService, and BAPI function call for RFC, but it seems not so much reliable, due to timeout and others. ion providing the link for download of .NET Framework Data Provider for mySAP Business Suite and some sample to invoke and get the data using SSIS.
View 5 Replies View RelatedIs it possible to deploy or import an SSIS package developed in visual studio 2010 onto a 2008 R2 integration server?
package: developed in vs2010, SQL Server: SQL Server 2008 R2.
Trying to deploy the package onto the server.
I run SSIS using DTEXEC command. The output of the SSIS are getting truncated after X caracters.
This is a typical message which doesn't really debug. (as the full path would show me the DB name...)
Progress: 2015-08-24 11:30:02.20
Source: Ensure Folder exists
Executing query "EXECUTE master.dbo.xp_create_subdir N'R:MSSQL_TRN...".:
100% complete
End Progress
Is there a way to get a longer message?
My source data indeed has leading 0s and I am reading my data into a #Temp Table with the data type of VARCHAR(10)...and its value is "0002565387". I am pumping this data into a SQL Server Table utilizing "OLE DB Destination". My "Flat File Connection Manager" has this column [AdditionalInfo4] defined as string [DT_STR] and the OutputColumnWidth is 100. I don't do any data derivation against this particular data column and simply map it in my "OLE DB Destination" and my database column is defined as [AdditionalInfo4] with a data type of VARCHAR(100).
Upon successful data pump of the data into my SQL Server Table, the column appears in SQL Server as "2565387".
Why is my SSIS solutuion truncating the leading 0s, which are indeed significant, on the data pump of data into my SQL Server Table? Is this possibly just a nuance of SSIS? Should I define a data column derivation for this data column so that the leading 0s are retained?
How to execute ssis package from command prompt and also pass configuration file to it and set logging to ssis log provider for sql server. Writing all those options with cmd.
View 3 Replies View Relatedi have a nightly job (SSIS Package) scheduled using MS. The package loads data from the OLTP db to the warehouse. The server has 256GB memory and out of which 211GB is free.
the job runs w/o any problems but some times it fails with the following error"DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint '<var>PrimaryKeyName</var>'. Cannot insert duplicate key in object '<var>TableName</var>'.".
When i researched this error i found out that its because of the memory issue. we have 222GB free memory and how come this is possible. Is there a way in the package or anywhere else where i can specify how much (percentage) of the memory that the SSIS package should use (something like SSRS threshold levelp).
I have created a package that will insert new rows into destination1 if the AnID does not exist in Source1.
This uses a data flow task which contains a oledb source, lookup and oledb destination.
Source1
Field Name AnID Acol1 Acol2 Destination1 Field Name AnID Acol1 Acol2
I want to be able to update the destination1. Acol1 and destination1. Acol2 if the Source1.Acol1 or Source1.Acol2 have changed.
To do this, would I need to create separate data flow task that includes a source, lookup and destination.
Or is this possible to build into my insert new records data flow task...
I have a very simply package using an Excel connection to an XLSX file. It's a straight read of the file and import onto a table.
The package works fine in Visual Studio 2008 development and also runs fine when executing on the (server I copied it to) under Integration Services.
However, under a SQL Agent, the package (32-bit is checked) can not acquire the connection to an excel file. I use UNC pathing to the file. I've read other posts about similar problems and tried various scheduling options (including Owner of job).
I even tried a to trigger it with a command-line which did not work:
"C:Program Files (x86)Microsoft SQL Server100DTSBinnDTEXEC.exe" /sq "our packagesMy_XLSX_File_Import" /SERVER myserver /X86 /CHECKPOINTING OFF /REPORTING E
All errors are: "DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0209302."
I'm having a problem with saving a password in a SSIS package that is accessing an Oracle database as an external data source. I experienced the problem that many people have had with the SSIS package not saving the Oracle password as expected. I successfully saved the Oracle datasource password (Password #1) using the "Encrypt sensitive with password" security setting and then setting a separate/new password (Password #2) for the SSIS package. I've imported this package into my Integration Services installation, and I can get it to run successfully by manually entering Password #2 when I open the package.
Now I want to pull the SSIS package into a SQL Job Agent, along with some other steps, to run on an automatic schedule. My question -- how/where do I embed Password #2 (the one for the SSIS package) in the settings for the SQL Job Agent step that I use to run the SSIS package? The SQL Job Agent step settings box prompts me for Password #2 before it will let me edit settings for the package, but it doesn't save that password. So when I actually run the whole job, the SSIS package always fails.