Integration Services :: Dataload Process - Error Capturing Process
Aug 20, 2014
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
I have a table that I need to identify similarities so I'm running a Fuzzy Grouping Process. I'm getting the follow errors and I can't identify the problema since all the fields are varchar, except for the first that is int but not use in the fuzzy.
select MSSEndCustomerTPID , orgname , address1 , cityname , statename , countryname from [sales].[vw_Fact_VolumeSales] a inner join [GMOFBI].[dbo].[vw_Dim_MSS_Organization] b on a.EndCustomerOrganizationKey=b.MSSOrganizationKey
now i use a SQL job to check the status column, pick xml and load to appropriate tables. instead of SQL job can i use a trigger whenever there is a insert it fires sp to load data would there be any disadvantage.
I want to process my cube using Process Data and Process Index instead of the Process Full. However, after configuring the 2 Analysis Services Processing Tasks (one for process data and the other for process index) and were executed sequentially (process data first then process index), I got this error:
Errors in the metadata manager. The process type specified for the CASES cube is not valid since it is not processed
Have I done the right thing?
The reason why I prefer using the Process Data and then Process Index, it's because it is much faster than the latter.
I have a ETL ( SSIS ) Process in which i am loading around 150 tables in each run. ( Truncate and Insert ). I have four packages each from different sources. ( Each package loads different tables and different numbers )These are run on weekly basis one after the other. Each package is taking around 60 to 90 minutes each. Now i want to track the progress of the ETL on my front End application.
We want this in two ways.
First Way : I need to show the user how much percent of ETL Process is completed
Second Way : I need to show the No of tables completed and how many rows have been completed in the ongoing table ( which is in process )
Hello all, I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation. and it also logs FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone. As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
Dear list Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log the above dos cmd works 100%
However when I use the Execute Process Task I get this error [Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles User::gsPreplogInput = ex.log User::gsPreplogOutput = out.log
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
The customer.bat file will have the following code: tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem: The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
I have worked in other ETL tools. So, i am trying to figure out how to do thefile decryption and process the data in memory using SSIS.I am using SSIS on Azure VM and my source files are on Azure storage. The files are encrypted and we are trying to use Phython script to decrypt the files and pass it to SSIS. I found out that Execute Process task can call the Phython script. However, i would like to get the decrypted data from the file and pass it to the next task (control flow) in SSIS without saving it as a file (in-memory). I found that execute process task output can be stored as a Standard Output Variable or to an object. Will this work or do I need to follow any other methods (since we need the entire file to be sent for additional processing).
I have an SSIS package which calls a command line app.When run in BIDS, it executes normally. The command line app is passed the arguments, does what it needs to do.When called as a SQL Agent Job (by the agent, or by me) it fails when calling the app, giving an exit code of 2 (which is an exception trapped by a try-catch). The SQL Agent service is running under my user (it's a test environment). The argument passed (from the log) is valid, and I've run it against the app, it provides the appropriate output.I can't for the life of me figure out what's going wrong.The app is passed an argument of a path and a password, and applies the password to the file, using interop.
while i am trying to unzip files using execute process task ,getting below error
[Execute Process Task] Error: In Executing "C:Program Files7-Zip7z.exe" "a -tzip D:excel.zip D:unzipfileexcel.xls" at "", The process exit code was "1" while the expected was "0".
Warning: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
i want to know more about unzip and zip files and folders using execute process task.
zip folder: C:Program Files7-Zip7z.exe SQL version: SQL server 2008 R2
do not having win rar so please instruct using 7z.its quite interest to work but i don't know to get desired result.
I have an execute process task set up to run ftp.exe and a script argument. The ftp.exe is referenced in the executable field without a qualified path. The package just seems to know it's there relatively. I need to change this to run a secured ftp executable that I recently installed on my pc. I put the new executable in the WindowsSystem32 folder where the old ftp.exe is stored. But when I put the new executable in the executable field, it says the 'File/Process "FTPS.exe" is not in path'. I get the same error when I fully qualify the path. Is there something I need to do with the new executable for SSIS to pick it up without having to fully qualify the path?
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error "A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)" this my sql script use [master]Go -- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO -- Switching to our databaseuse [DatabaseName]GO CREATE SCHEMA schemaname AUTHORIZATION usernameGO ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO /* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter' -- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter] -- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber] -- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
I am using SSIS 2012 to dynamically backup stored procedures on a list of Servers and Databases.Here are the steps in my package,
1. Execute SQL Task: Captures a result set (configured to save the data set in an Object variable) with all the Servers and Databases on which stored procedures exist.
2. For each loop that is configured to get each each row(server name @[User::Server_Name] and databases name @[User::DataBase_Name]) from the object variable (@[User::Connection_Strings])and pass it to a connection manager that has an expression for servername and database name.
2a) Within the for each loop, i have an execute process task that is configured as
i) Executable: C:WindowsSystem32WindowsPowerShellv1.0powershell.exe ii) Arguments: Configured this to fetch value from an expression. The expression i am using is,'C:batch - CopyPowerShell Scripts to Backup Stored ProceduresScriptOutSPs.ps1' -$Server_Name "+ @[User::Server_Name]+ " -$Database_Name "+ @[User::DataBase_Name]
Note: @[User::Server_Name] is the Servername from object variable and so is @[User::DataBase_Name] for database name . The execute task is to run a command line that triggers a powershell script with parameters. Here is the powershell script that i am using,
When i execute the script, by passing parameters from arguments, it executes successfully but nothing happens. Passing wrong arguments in the expression?
Now I have a different constellation: Integration Services run on one server, in version 2014, the Analysis Services instance to process the cube database on runs on another server, version 2012.I tried several different combinations of SSIS version and Analysis Management Objects version, and got several errors while running the process package (e.g. object reference not set to an instance of an object, cannot find AnalyisServices.dll..)
Is this combination 2014/2012 possible at all?I assume the BIDS version has to be for SQL Server 2014, as I want to run SSIS packages on a 2014 server, is that correct? Does it matter at all, can I also deploy 2012 packages?Which version of Analysis Management Objects do I have to use? I assumed I have to use version 11.0 here, because I want to process a 2012 cube?If it is possible to use the "old" 11.0 version of AMO, do I have to do anything so that it can be found by the SSIS package running on the server (it was built on my local computer, there I have all SQL Server versions from 2005 to 2014 installed in parallel), or do I just have to copy it to the appropriate SQL Server folder?
We are using SQL Server 2014 and SSDT-BI 2013. We have a reporting environment where business users create objects which need to be persisted for fiscal year reporting. Let's say for instance SQLSERVER1SRVR1 they create table objects like below in the reporting environment.
Accounting2014, Accounting2015 in AccountingDB; Sales2014, Sales2015 in SalesDB; Products2014, Products2015 in ProductsDB; Inventory2014, Inventory2015 in InventoryDB etc....
These tables are persisted for auditing in a different environment SQLSERVER2SRVR2 for finance & audit folks.We would want to automate this process using SSIS to create tables in corresponding database and load data. I tried using For Each Loop container but the catch is I could loop the source or destination but how do we loop on Source & Destination at the same time (i.e when source is in AccountingDB destination to be AccountingDB, source SalesDB then destination SalesDB so on etc....
I'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.
My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"
SSIS keeps saying there are illegal characters here. I've Googled and looked about 20 articles and I can't resolve it.
I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.
So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv
I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:
XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]
I just can't get it to execute and I keep getting illegal characters.
I've got an SSIS solution file with project deployment model in VS 2013 and would like to deploy that to SSISDB on different environments.All these days I followed the regular way to create a project in SSISDB and deploy it to that. Now want to find out if i can automate this process and so got some questions
1. Can we automate the process of creating a project on SSISDB based on our SSIS project name? This will be like when we do a deployment it should check if the project exists or not on SSISDB based on our SSIS project name, if the project exists we just deploy the packages in the project and if the project does not exists in SSISDB it will create that project and deploy the packages.
2. Can we also automate the process of creating environments? In traditional way we manually create the environment variables under environment tab of SSISDB, but can we make that also as part of deployment? Like when we are releasing to Dev server we look if that particular Dev variable exists on that server, if it exists we just update the existing stuff and if it does not exists we just create it.
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Hi, I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%) I would get an error message saying: "550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process" and then the upload failed. I'm using SQL Express. Does anybody know what's the cause? Thanks a lot
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and every time the process id is different. Here it is 3880.
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process: Spid 55 55 ecid 5 5 Ecid 0 0 ObjId 0 1784601646 IndId 0 0 Type DB PAG Resource 1:1976242 Mode S IS Status TransID GRANT GRANT TransID 0 16980 TransUOW 00000000-0000-0000-0000-000000000000 00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH CMD AWAITING COMMAND Physycal id 1059 Login time 2007-07-05 04:29:53.873 nat address DFF06EBF974D Wait type 0x0046 HostName . BlkBy . DBName grpprddb CPUTime 54331 DiskIO 1059 ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request: select * from SYSOBJECTS where id=1784601646
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
I have written Custom delivery extension, I am trying to debug this by attching the process ReportingServicesService.exe , I am getting error "Unable to Attach to the Process.Access is denied". I am Admin on my sytem, ASP.net is also part of admin and debuggers group. I am using Visual studio 2005, reporting services 2005, ReportingServicesService.exe is also under my login