I have created an package in SSIS and getting some problem when i am export date from OLEDB to Excel its format getting change. I am passing date format MM/dd/yyyy and its showing yyyy-MM-dd.
View 2 RepliesI am using Execute sql task in my SSIS package, and I am trying to make the following query:
<o:p></o:p>
Select max(sqlid) from archive.dbo.Archivebbxfbhdr
where timein <= ?<o:p></o:p>
Where ? is my input parameter variable migration_start which is a datetime.<o:p></o:p>
My issue is that variable name migration_start which give me default format of 6/11/2015 1:26 AM
But I expecting to get in 2015-06-11 01:26:22.813 format.<o:p></o:p>
How I can I change the datetime format of my variable to be (yyyy/mm/dd)hh:mm:ss)?<o:p></o:p>
i have a excel file in which i have a date column it having the below date formats belowÂ
Install Date
20140721
31.07.2014
07.04.2015
20150108
20140811
20150216
7/21/2014
11.08.2014
07.08.2014
So using SSIS how we would load this date column into the table into one format like dd/mm/yyyy or any single date format
So I am trying to export my SQL Server Result Set from "OLE DB Source" to an Excel spreadsheet. This was working fine when I hard-coded the Excel spreadsheet path and file name. But now I am trying to create an Excel spreadsheet and file name using a variable...@ExcelFullyQualifiedName.
My "Excel Connection Manager" is defined with the following Properties...
DelayVaildation = TrueExpressions and Connection String ==> "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" + @[User::ExcelFileFullyQualifiedName] + ";Extended Properties="Excel 12.0 XML;HDR=YES";"
"Excel Destination" Properties...
ValidateExternalMetadata = FalseCustom Properties ==> AccessMode = OpenRowset From VariableOpenRowsetVariable ==> User::ExcelFileFullyQualifiedName
When I attempt running my Package I am getting this error...
Error: 0xC0202009 at Data Flow Task, Excel Destination [100]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Error: 0xC0202040 at Data Flow Task, Excel Destination [100]: Failed to open a fastload rowset for "serverfilesharessharedExport DataExport_Week_Of_2015_11_01.xlsx". Check that the
object exists in the database.
Error: 0xC004701A at Data Flow Task, SSIS.Pipeline: Excel Destination failed the pre-execute phase and returned error code 0xC0202040.
We have a requirement to produce adhoc Excel reports with a standardized header page with a disclaimer attached. We want to be able to feed in a SQL Statement, or a table with the resultset from a SQL Statement and have SSIS populate an existing blank Excel workbook, which the disclaimer attached. The use of xp_cmdshell is not an option.I've spent a lot of time looking for solutions on the web and it seems though its not possible - although many articles are 3-5 years old. Before I throw in the towel, I just wanted to get feedback from this group if it still is not possible in the latest versions of SQLServer and SSIS, or to ask if there are any other 3rd party solutions that can do this today.
View 5 Replies View RelatedFacing problem while loading date in MS SQL Server 2005 from excel file (csv format).
How to load the excel file data without changing the excel file (csv format) .
see the [Start Date] and [ Exp End Date] having values like this : " 2015/07/31"
I have a foreach loop that is processing all .xls files then moving them to a processed directory.Problem is that when I try to open the original file which is in .xls 97-2003 format, it's giving me a file error that SSIS could not read. Â Found out the problem was called Extension Hardening. Â I fixed it in the registry according to a website I found and I thought about writing a Batch file or Script to handle it, however SSIS still can't read unless I open and "save-as" to another format. Â It even works if I still save it in 97-2003 format just has to be a different file.How can I open and resave the files (all excel files in directory through a loop) and rename them the same?
For example:
Original file named "ABCDEFG_08_15_2015.xls"
Can I loop through all files in the directory and name each one differently say "REVISED_ABCDEFG_08_15_2015.xls" so I can read them through SSIS?I think I need a @filename variable or something for that..
I've a text file which having a datetime column value like YYYY-MM-DD-HH.MM.SS.XXXXXX. I cannot convert this is to datetime format from text file using BCP utility.Â
Presence of hypen "-" between DD and HH, the SQL server does not accept this is as Datetime.
Is there any option to covert the date value in format file in BCP.
I'm trying to use the Import/Export Wizard as I used to, as a handy tool to figure out what a series of T-SQL statements (in an SSIS package) is doing - or, if I'm lucky, what on earth the original dev intended them to do.
Version: SQL 2014 64-bit running on Win 7 64-bit
The code is pretty dreadful:
SELECT DISTINCT on one set of column names,
join this set to another table but not on exactly the same set of column names,
embedded (SELECT MAX(bla) FROM SameTable WHERE [match to outer set on another set of columns] GROUP BY [hey, yet another set of columns!]) inside the SELECT column list...
and it all goes to a nasty #Tmp, which is then abused with further bad code further down.
Imp/Exp is always handy to quickly get the intermediate results into an auto-created real table, so I can figure out exactly what the effect of this is. I use it to export from the database back to the same database, but to a persisted table.
This time (first time with SQL2014) it's not working. The source is "write a query" (paste the actual query). The destination I set to a new table. The auto-generation of the new table creates every column as type date. Not surprisingly, this doesn't work, as the original data is mostly not of date time.
Hi All
I've been googling this for a while now and can't seem to find any elegant answers.
I'm looking for an automated way to present a FORMATED Excel Spreadsheet to the Customer from a stored procedure output.
Can anyone advise me the best method of doing this - should I / can I assign an Excel Template to the DTS Task output ?
His mind is set on Excel and the formatting is basic and easy to write in a Macro which I've done, but this requires human interaction to finish the task (Automated Run Once on opening etc).
In an ideal world an individual would send an email to the Server with two formated parameters (@FromDate & @ToDate) and would be emailed back a ready formatted S/Sheet. But I believe he would be willing to just select the relevant SpreadSheet for the Daily / Weekly / Monthly periods dumped.
Thanks
GW
I have a ssis package where I need to have excel destination. Â In the Excel file, I need to have few rows with some text and then populate data below the text. One the text is like this:
Data as of: Â 08/25/2015
if the report ran today, then Data as of will have Yesterday. So, if the user opens that excel file after a week, then user should see same  Data as of:  08/25/2015. not today()-day(1).
I was planing to handle on excel side with today()-day(1). but it only works the day it was run. Then the excel file is open after few days later, then it might as Data as of:  08/30/2015 which is not true. It should still stay Data as of:
 08/25/2015 on what ever date the excel file is open. The SSIS package  runs only once.Â
How do I handle this so that whenever user open the file, they will see Data as of:  08/25/2015. This is not a column in excel. It is like a description of data in excel.
Hi
I'm trying to export data to an excel spreadsheet in a csv format. Is this possible in SQL?
Thanks,
Missy.
I am using SQL Server Reporting Services 2005.
In one of report i am calling sub report which independently renders in excel format without problem but when it is called in main report as SubReport in Data Table Cell in that cell its giving error message Subreports within table/matrix cells are ignored.
While rendering to PDF format it is working fine.I have problem only in excel format renderings..
Dear Expert!
A server with SQL 2005 sp2, Reporting Services and Sharepoint services (ver 3.0) (in integrated mode) gives an odd error. When viewing a Reporting Services report with a Date Time Picker, the date chosen is wrong. The preferred setting is Danish with the date format dd-mm-yyyy. The date picker shows the months in Danish but when selecting a date, and clicking on the Apply-button, the date reformats to US (mm-dd-yyyy).
Example:
When choosing 5th of September 2007 and clicking apply, it shows in the picker, 9th of May 2007.
When choosing 26th of September 2007 and clicking apply, it shows, again in US format, the RIGHT date but adds a timestamp €œ12:00 AM€? in the end, making further enquiries to fail.
The report itself receives the right date and shows correctly. The only case it fails is, when the time stamp appears.
The server is a 32-bit one with 4 GB RAM. A testserver with identical collation on the Reportserver database cannot recreate the error. The site containing the reports has been set to Danish in the regional settings. To Reinstall is not an option.
The test report has no database connection whatsoever.
When setting the site to US, the timestamp won€™t appear at all.
The server has been restarted and the installation procedure was of the simple kind. No special tweaks at all.
Any advice would be greatly appreciated.
Kind Regards
Johan Rastenberger
Hi,
I have a dts package which is reading from a sql table and writing it to an excel file, its working fine except that I have a decimal field in the sql table but in excel file its writing it as string field.
The way I create this package is that I create a template file and I format that column to a "Number" format. Then I take this template file, rename it, export all the data to this file.
But when I open this file that decimal field is displayed as a string column and its left aligned.
Is there any way to fix this problem?
Thanks,
Hi,
I have a problem when exporting a report to Excel.
The problem is with the custom formatting. The report has a field named amount with its format property = C (on the properties window of the textbox in the report designer). When the user exports the report everything seems ok, calculations and so on... but the problem is when from another workbook a cell makes a reference to the cell amount of the exported report. The exported report, has this format [$-1010409]$#,##0.00;($#,##0.00) on the amount cell. In fact every format type of the report designer, begins with [$-1010409].
To reproduce this error:
Make a simple rdl with a textbox format C. Export it to excel. Create a new workbook and make a cell reference to the exported report formated textbox cell (='\ComputerFolder[ExportedReport.xls]Sheet1'!$E$15). Close the exported report and the new workbook, open the new workbook (not the exported one) and update the reference. Results in a #Ref error.
Tnx of your time and effort.
Sorry for my bad english.
G
Hello Everyone,
I need to modify an excel format before impor my report into this format from reporting service...
Eg.:
I need yo change the workbook name, it takes the name from my report...
If you have some examples pliz help me!
Thank's
Karla
Trying to upload excel in server where excel is not installed. BIDs was there in the server, when i am trying to craete Excel source I am not able.what the workround for this.. How to upload excel without excel installed on the server.
View 4 Replies View RelatedWe have 10 sheets in Excel File and 10 sheet contains errror data. How to load 9 sheets data in to 1 destination and error data in to other destination?
View 4 Replies View RelatedI have ssis package where I have excel connection manager with expression pointing to a variable which has path for location and name of excel spreadsheet to be create each with date on the name.ExcelFilePath points to variable for shared location where excel file will be saved.I have File system task for copying template excel file to destination location with date in file name.I drag and drop excel destination.  Pointed to excel connection manager. Under data access mode, I have select table and view.  When I try to select name of excel sheet,  it says, no tables or views could be loaded. I should be able to see sheetname there so that I can map column. I only have option to create new spreadsheet. I want to use template to load data in excel file. I dont want to create new sheet. It was working before. But I opened the ssis package and its broken. I was able to see spreadsheet name before but I dont see it now even though I have not made any change to package. XCEL 12.0 XML;HDR=NO";
View 5 Replies View Related
I load data from excel and sometimes I have problem with format of excel's cells. For example format of cell should be "general" but one of cell is "custom" and I get wrong data but if I just change format in excel to "general" - data is correct.
Can I change or check format of cells in SSIS ?
Anyone know why my xls does not have number formats when exporting from a report with a matrix?
I keep having to do 'paste special multiply by 1' on the whole thing.
Ridiculous!
While importing data from Excel source , some column is getting null value even though excel column has value.To Resolve the issue we tried with
HKEY_LOCAL_MACHINESOFTWAREWow6432NodeMicrosoftOffice14.0Access Connectivity EngineEnginesExcel
1.Change the Value of the Row TypeGuessRows from 8 (Default value) to 0 and ImportMixedType = text
• xls
HKEY_LOCAL_MACHINESOFTWAREMicrosoftJet4.0EnginesExcel
1.Change the Value of the Row TypeGuessRows from 8 (Default value) to 0 and ImportMixedType = text
the connection string of the excel
UPPER(REVERSE(SUBSTRING( REVERSE(@[User::VarInputExcelFile]), 1, 5) ) ) == ".XLSX" ? "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" + @[User::VarInputExcelFile] + ";Extended Properties="Excel 12.0;HDR=Yes;IMEX=1";":"Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=" + @[User::VarInputExcelFile] + ";Extended Properties="EXCEL 8.0;HDR=Yes;IMEX=1";"
by doing the above setting also , the column is coming as null from excel source even though there is data in excel.
Hi, I have this query string:
SELECT distinct [KioskID], MAX([ServerDate])FROM [report].[dbo].[tbKiosksLog]Where kioskid like 'ids%' group by kioskid
order by kioskid
I'm using Ms SQL Server 2000 Enterprise Edition.
After I've process a OLAP cube, for the dimension with the data type DateTime, the date format will come out as YYYY/MM/DD hh:mm:ss.
How do I change that date format to just DD/MM/YYYY?
want to insert a format date "dd/MM/yy" into a MS SQL table, But the fields default format is American "MM/dd/yy"
How I can change this default format.
Hi guys,
I would like to know how I want to change format date from 1989-01-01 to the format dd/mm/yyyy.
thanks and regards
HI,
I have noticed that SQL SERVER 2005 uses American date format but i want to change it to UK/European time format i.e. dd-mm-yyyy
can any on tell me how to do it in sql server settings. And is it possible that I can change it only the during the course of my STORED PROCEDURE.
I know it is quite and any one will answer that soon
hoping quick reply
regards,
Anas
Help!I have a table that has datetime format field, I exported the table toa csv while I dropped it and tried some other data, but now sqldoesn't recognise the date format for importing, heck I don't!The dates look something like:40:58.1Whick means nothing to me, or any of us here for that matter...Any ideas?John
View 1 Replies View RelatedWhat is the best way of converting datatime field value 29/03/2005 08:58:27 to 29/03/2005.
I only want to remove Time from date and I am using Sql Server 2000.
Thanks
Arvind
I am getting dates in American format i.e.
Code:
2011-04-12 00:00:00.000
How can i change it to dd:mm:yyyy ?
I have created a table with a field Register_Date in DATE format. However, it results showed me 21/12/2008 I would like to change it to 21/Dec/2008.
How do I change that using SQL command? I tried to Google and used codes like below and it will not work.
SELECT CONVERT( CHAR(6), Register_Date, 106 )
FROM REG
The error message was ORA-00936: missing expression
I also tried:
SELECT replace(convert(char(15),Register_Date,106),' ',' - ')
FROM REG
and it gives it the same error message.
Would it be possible to change the date time from varchar to datetime. it currently showing as varchar in the following format 20080401 0845
can it be changed to date/time format into something like this 01/04/2008 08:45. If someone could help that would be great. Many thanks