Integration Services :: Error While Changing Field Size
Sep 10, 2015
I am loading from SQL Server 2008 to Access 2010 using SSIS. One of the columns in the table I am loading into is a Number datatype and Fieldsize is long integer. The values are being truncated, so I want to change the Fieldsize to DOUBLE. However, when I do that I receive the error below. What should I do? I would like not to change my Windows registry.
This error can be caused by one of the following:
The maximum number of columns allowed in a table or the maximum number of locks for a single file is exceeded.
The indexed property of a field is changed from Yes (Duplicates OK) to Yes (No Duplicates) when duplicate data exists in the table.
An expression is not specified in the Expression property of a calculated field.
If the maximum number of locks per file was exceeded, you can increase the number by editing a registry entry. However, this is not a recommended option.
If you use Registry Editor incorrectly, you could cause serious problems that require you to reinstall the operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
Make a backup of the registry. Find the MaxLocksPerFile registry value by using the Windows Registry Editor, and then increase the value. The MaxLocksPerFile value is saved as part of the following key:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftOffice14.0Access Connectivity EngineEnginesACE
If the Indexed property of a field and duplicate data is located in the table, reset the Indexed property to the previous setting, or remove duplicate records from the table.
While I was loading to the same table a few days ago, I received a warning and the task took approx 9 hours. I am attaching the screen shot.
View 8 Replies
ADVERTISEMENT
Jul 7, 2006
We have a small table of about 13 million rows that needs altered. A column in the table needs to be changed from a varchar(20) to a varchar(500). When we ran the alter table script, 3 hrs later and it wasn't done running. Any suggestions on what we can do to speed up the process?
Thanks ahead of time
DMW
Edit:
We are running SQL Server 2000 and the db at the time was running in simple mood
View 1 Replies
View Related
Jun 29, 2015
I have a scenario where we have to handle dynamically changing source columns.
For example , some times in the source files the number of columns will be increased or decreased, new columns can be added in the middle or in the end of the source file.
How to handle this kind of scenario in the SSIS ?
View 9 Replies
View Related
Sep 15, 2015
I am trying to implement Slowly Changing dimension transformation using Merge.Meaning both changing and historic attribute is in place. It seems we can use Update only once in Merge, in our scenario we have to update...When the historic attribute also have changed (To update the row as expired, IsCurrent=0)Also When changing attribute is changed. (Historic attribute is same). This case also we need to use Update. I am using CDC to do this. Updated OUTPUT is moving to a temporary table and using Execute SQL task to get updated.
View 3 Replies
View Related
Jul 14, 2015
Facing problem while loading date in MS SQL Server 2005 from excel file (csv format).
How to load the excel file data without changing the excel file (csv format) .
see the [Start Date] and [ Exp End Date] having values like this : " 2015/07/31"
View 5 Replies
View Related
Jul 30, 2015
I am in between of creating a dynamic SSSIS package which will run for multiple zones having different source connection.My source is in Oracle.I am having 3 DFT with the 3 different source tables.I want to create a package with above DFT dynamically so that my single package can run for the entire zone with dynamically source connection change.I have created a Master table which stores the zone source connection string and zone name. I have 2 different connection.so if in future any new zones come so only newly zone details need to be add in master table without opening the package.
View 3 Replies
View Related
Dec 12, 2014
I have created a SSIS package which runs every hour from my Machine. First part of my Package runs a Execute SQl Task and result set (single row, single column) is a comma separated list of Unique Record Ids which have been updated in last hour. (i.e. FJ1,FJ2,FJ3) I capture this result in a variable and when I User script taks to display the value of this property, it appears as it should be.I pass this Variable to Execute SQL Task on Different ODBC Server using a Stored Procedure.My SQL Statement is as Following
call DeleteRowsById(?)
And then I have assigned my Variable (as SQL_Longvarchar) to Parameter 1 in Parameter mapping Section. (ParameterSize is -1) but it doesnt delete the records from the table. (I ran the SP manually in Workbench and it works as expected) Then i had an Idea and
as part of my SP I started making entries in a Temp table just to see whats coming up as variable. Insert in the table shows only first Charecter from the variable and which is why its not deleting any records.I can not find why my variable is being truncated.
View 5 Replies
View Related
Jun 19, 2015
I'm using a shared data source to connect an Oracle server in my packages. After changing the database user password in the shared data source, I noticed the package concerned would fail with the following description.
Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01017: invalid username/password; logon denied".
Is there a way to ensure the packages will use the latest information in the shared data source? I did do a Rebuild before executing the packages.
View 5 Replies
View Related
Jul 2, 2015
I have a flat with few columns
FirstName, lastName, Address
f1,l1,a1
f2,l2,a2
I build my SSIS package based on the above file.But now i receive files with different columns order let say
lastName,FirstNamr,Address
l1,f1,a1
L2,f2,a2
or
Address,FirstName,LastName
a1,f1,l1
a2,f2,l2
every time i receive multiple files in different order and i have to remap all my mappings. These are just a few columns and i have like 20 columns and the order can potentially change any time. so every time i have build new packages remap them etc.
through normal c# code it pretty easy. I tried to add script here but the script also needs a source and mapping so there is also a mapping issue. Is there a better way to do this.
View 10 Replies
View Related
Aug 14, 2015
Out of Memory when working with big XML Files:when validating XSD it process small files but when size close to 1gb it throws .I have 16 xml files out of which 8-10 files size will be around 1gb processing one by one in FOR EACH LOOP container in SSIS[XML Task] Error: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".Task XSD Validation failed.
system configuration :
processor:Intel(R) Xeon (R) CPU E5-2670 v2 @2.50GhZ 2.50 Hz
Installed memory (RAM): 61 GB
System type: 64 -Bit operating System
Visual studio:2012,32 bit
virtual memory : 12499 MB
whether the size of the XML Document a limitation for the validation task ? or any system configuration i need to improve?
View 5 Replies
View Related
Sep 26, 2015
I received a pipe-delimited file that I need to import. (It has the equivalent of 650+ fields on a single row). While I had no issue importing it (SSIS 2008) I noticed that the input connector, Advanced option, shows an "OutputColumnWidth" of only 50 for all fields.
I say only 50 because some of the pipe-delimited fields can supposedly have a max of 250 characters so I'm concerned about potential data truncation. Unless someone has another thought I plan to manually set those OutputColumnWidth fields to 250.
View 5 Replies
View Related
May 22, 2015
I have an expression based project connection manager in an existing package and updating Packet Size parameter.
After update and clicking on OK, Packet Size value reverts back to 0 (which is old value). This connection manager is used by lot of Dataflow tasks in my package and recreating the connection manager and updating the reference is not a viable option.
View 2 Replies
View Related
May 28, 2015
In my SSIS package, i have a field test_method_number coming from OLE DB Source. I used Derived transformation to trim test_method_number: TRIM(test_method_number)
Now in the next Derived Transformation, i see duplicate test_method_number. How to get rid of this duplicate?
View 6 Replies
View Related
May 7, 2015
I am setting the 'To' field in the Send Email task using an expression in the expression textbox because the email address is received from a variable.But the taks throws error, as the 'To' field in the task is empty and only the expresssion field is filled. Is there any workaround ?
View 10 Replies
View Related
Apr 24, 2006
Hi,
I have been running a merge publication & 4-5 subscriber all running perfectly good, but today I started getting this error below? I generated a new dynamic snapshot and re init the subscriber, but still the same. I synchronized the other subscribers and they are all running with no errors, even after a init. I.E. I would think this is data related, to this subscriber, but I have no further ideas how to track it down?
any ideas?
Regards
Gert Cloete
bcp "conCORD_ODS"."dbo"."MSmerge_contents" in "\OBSQL2005\ConcordReplData\MERCURYSQLEXPRESSOBSQL2005$DEV_CONCORD_ODS_CONCORD_ODSMSmerge_contents90_forall.bcp" -e "errorfile" -t"<x$3>" -r"<,@g>" -m10000 -SMERCURYSQLEXPRESS -T -w
To obtain an error file with details on the errors encountered when initializing the subscribing table, execute the bcp command that appears below. Consult the BOL for more information on the bcp utility and its supported options.
End of file reached, terminator missing or field data incomplete
Field size too large
The process could not bulk copy into table '"dbo"."MSmerge_contents"'.
The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
View 6 Replies
View Related
Jun 5, 2015
I have to access a web service where I pass in a product number and it produces an XML result with an /image section where it has a long string (base64?) I am trying to call the web service and save the image to the OS.
I am trying to get the result into a variable and save it to disk with the itemno.jpg as the name
This is a sample file I get back..
<NewDataSet>
<Table>
<ITEMNO>2065</ITEMNO>
<Image>/9j/4QAYRXhpZgAASUkqAAgAAAAAAAAAAAAAAP/sABFEdWNr ... removed since too long for post ...</Image>
<ImageDate>2015-04-15T00:00:00+00:00</ImageDate>
</Table>
</NewDataSet>
View 9 Replies
View Related
Jul 15, 2015
I have table called email_address and have all the email ids in this table. using sql task, I am getting the ids and passing to string. This string variable is passed to the to field using expression.Since it is a string only the first email id is set in the to field and the rest is ignored. Can you tell me a way to parameterize all the email ids to the to field in this case.Email ids from Table -> To field..I would like to put all the email ids in the to fields at once and send only a single email!
View 10 Replies
View Related
Nov 17, 2015
I'm trying to convert a column in my source table of datatype varchar(6) to a column of datatype int in my destination. I tried using the Derived Column/Data Conversion transformations but none of them worked. So, I tried using the following C# (credits to the original poster) and getting an error during compilation.
Note: "MyCol" is the Input Column I've specified in the Script Component and "CleanCol" is the Output column I've specified as datatype [DT_I4].
public override void Input0_ProcessInputRow(Input0Buffer Row)
{
int colOut = 0;
if (!Int32.TryParse(Row.MyCol, out colOut))
{
Row.CleanCol_IsNull = true;
} else {
Row.CleanCol = colOut;
}
}
The best overloaded method match for 'int.TryParse(string, out int)' has some invalid arguments
The other expression I've tried was:
ISNULL(MyCol) ? (dt_i4)"" : (dt_i4)MyCol
From the above code, you might have understood that the source field has some blank records as well in the MyCol field.
What is the best possible way to do the conversion from a String to Int or fixing the error from the above.
View 10 Replies
View Related
May 30, 2015
I am using Sql Server 2012. I have a table which has a field as Datetime (it is a table in Dynamics CRM 2011 so I have no control of the data type). Say this field is called BisStartDate. If I run this query in management studio.
select
BisStartDate, BisStartDateutc
from myTable
where _bisnumber=10375
I will get:
BisStartDate BisStartDateutc
2014-07-29 00:00:00.000 2014-07-29 05:00:00.000
*in CRM, datetime is saved in 2 fields, one is the current time, the other one is the utc time.
You can see the offset between the datetime and utc is 5 hours.
However when the same statement was running inside a SSIS package on the server, the result returned is:
BisStartDate BisStartDateutc
2014-07-28 23:00:00.0000000 2014-07-29 05:00:00.000
And if I do
datediff(MINUTE,CRMAF_BisSection.ttc_section_startdatetimeutc,CRMAF_BisSection.ttc_section_startdatetime)
I will get -5 if I run it in ManagementStudio and -6 is running on server package(running inside VisualStudio will be -5, same as running a query in ManagementStudio).
I think when the record was saved, “date” is 5 hours offset to UTC time but now the system use the current utc offset which is 6 hours. I just want to use the BisStartDate as it is. How do I let the SSIS turn off the conversion.
The same datatime is saved in another system then we compare them to check the data entry. Now because of this one hour difference, sometime the Day will be different.
View 8 Replies
View Related
Feb 1, 2011
I've got two databases on the same server and replicate some tables from one database to another.The replication is configured so not to drop the table if it exists, but to delete the data based on the filter if one exists. There are two tables on the subscriber that have some extra columns.
I get "field size too large" error when trying to replicate them. Is there a workaround without having to make the publisher and the subscriber tables identical by schema?
View 5 Replies
View Related
Jul 30, 2015
We are using lookup transformation in SSIS 2012. The lookup transformation queries a table with two date columns. When we hover the mouse over the two columns in the 'columns' tab of the lookup transformation editor, the two columns show as DT_WSTR instead of DT_DBDATE. This causes the SSIS package to fail due to data type mismatch.A similar abandoned thread is available at: URL....
View 2 Replies
View Related
Nov 6, 2007
I've SQL Server Reporting Services 2005 configured on my system, but now I'm NOT Able to start the report server. I get this error on http://<serverurl>/Reports/Home.aspx:
The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) (rsRPCError) Get Online Help
The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled)
Key not valid for use in specified state. (Exception from HRESULT: 0x8009000B)
I don't want to loose any data. Please help me resolving this error.
FYI, I've modified the SQL Reporting Services account LogOnAs info, in Properties of "SQL Server Reporting Services (MSSQLSERVER)" Service, in Windows Service Managment.
Earlier I had .useraccount as username, I modified it to domainnameuseraccount. And then suddenlt everything broke for reporting server.
View 4 Replies
View Related
Nov 13, 2007
When ever I try to view Running or Stored packages in Integration services I get the following error message.
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED)) (Microsoft.SqlServer.DTSRuntimeWrap)
------------------------------
Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED)) (Microsoft.SqlServer.DTSRuntimeWrap)
------------------------------
BUTTONS:
OK
------------------------------
I am able to connect to Integration Services fine I just can't access Running or Stored Packages. Has anyone experienced this issue?
View 3 Replies
View Related
Mar 21, 2006
Hi All,
I am little new to 2005 so this may be an easy one. I have a IS package that I created on my local 32 bit machine. I have copied this package to one of our servers running SQL 2005 EE x64. The package executes fine until it gets to a VB Task at which point it errors with the message of "The Task "DefalutValues" cannot run on this edition of Integration Services It requires a higer level edition"
Is this a known bug/error that you can not build on a 32bit machine for a 64bit machine. I have set the precompilescriptINtoBinaryCode value to true.
If anyone has any suggestions please let me know.
Thank you.
View 5 Replies
View Related
Jun 4, 2015
I'm unable to find a solution to this truncation error on google.This happens only on one field which has comments. The offending Excel row/column has text that was entered in two lines i.e they entered the data and pressed "enter" and wrote a new line in the same row.Im using an Excel file source in SSIS and an OLEDB Destination (SQL Server) but one column keeps erroring out and I have tried to do the following:
1) Change output column width in advanced editor (still errors)
2) Data conversion tool between the source and destination (still errors)
View 4 Replies
View Related
Apr 24, 2015
In one of my package, i m getting this error:Error 128 Validation error. ST-MDR-NYMEXSPAN Connection manager "FF_errorEvent": The file name "fdyrs0 1MktDataWMDEVDevNymexSpanProcessingAreaAuditFilePackageErrorLog.csv" specified in the connection was not valid. ST-MDR NYMEXSPAN_ Enhan.dtsx 0 0 ..But in connection i have provided the valid file. Please see the screenshot below. After providing the valid file also, this connection manager is saying "A valid file name must be selected". I deleted the connection and tried to create a new connection again but still i m getting this error. Then i tried creating connection on my local folder then it worked fine. why in the shared path i am getting this error? and what should i do to overcome it.
1) I have access to this shared folder.
2) I have saved this connection in a variable.
3) Run64BitRuntime is set to false.
View 4 Replies
View Related
Apr 25, 2006
when executing my data flow package that contains only one source and one destination
OLE db source -> SQL server destination
the following errors occurs in my output
Error: 0xC0202009 at Data Flow Task(infraction action), SQL Server Destination [3600]: An OLE DB error has occurred. Error code: 0x80040E14.
Error: 0xC0202071 at Data Flow Task(infraction action), SQL Server Destination [3600]: Unable to prepare the SSIS bulk insert for data insertion.
Error: 0xC004701A at Data Flow Task(infraction action), DTS.Pipeline: component "SQL Server Destination" (3600) failed the pre-execute phase and returned error code 0xC0202071.
i've checked the structure of my source and destination table but nothing seems to be wrong
if someone have ever faced these errors help me :D
View 22 Replies
View Related
Jul 15, 2015
I am using derived column to convert string data to datetime .My string data :
Start Date
15/06/2015
30/06/2015
NULL
2015/06/24
I wrote in derived column expression:
(DT_DATE)(SUBSTRING(([Start Date]),7,2) + "/" + SUBSTRING(([Start Date]),5,2) + "/" + SUBSTRING(([Start Date]),1,4))
which is giving error :
[Derived Column 1 [5452]] Error: The "component "Derived Column 1" (5452)" failed because error code 0xC0049064 occurred, and the error row disposition on "output column "Start Date" (5650)" specifies failure on error. An error occurred on the specified object of the specified component.
How to write the expression in derived column to handle null value as well.
View 5 Replies
View Related
Dec 2, 2015
When i use single object variable to pass it to two sequence container having 2 different Foreach ADO Enumerator; seems like the scope of the variable is completed once sequence container 1 is done and second fails with below error
Foreach ADO Enumerator
Error: COM error object information is available. Source: "ADODB.Recordset" error code: 0x800A0BCD Description: "Either BOF or EOF is True, or the current record has been deleted. Requested operation requires a current record.".
Does we have to set any property so that object variable scope persist until both loops are completed.
It works fine if i push the data to 2 different object variables.
View 2 Replies
View Related
Jul 8, 2015
I want to caputure all error records with rowid and error code and Error description in SSIS 2012.We want to do this in Dataflow level... I am using error out option(Redirect Row). But it is not giving detailed information of the error records.
View 3 Replies
View Related
Jun 3, 2015
error[42000][mysql][odbc 5.3 (a) driver] mysqld-5.6.21 -log] where preview a data
View 2 Replies
View Related
May 6, 2015
I am using SSIS 2008 R2 & SQL Server 2008 R2. When I run the package in bids it runs fine but when I try to execute this package from agent job I get the below error message. In the job execution options I tried using 32-bit runtime that didn't work either.
Connection String for Ole db source"Data Source=Test;Initial Catalog=DB_SSIS;Provider=SQLNCLI10.1;Integrated Security=SSPI;Application Name=SSISDataLoad;"
Error Message:
Executed as user: Domainusername. Microsoft (R) SQL Server Execute Package Utility Version 10.50.4033.0 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.
Error: Code: 0xC0209302 Source: SSISDataLoad Connection manager "DB_SSIS" Description: SSIS Error Code DTS_E_OLEDB_NOPROVIDER_ERROR. The requested OLE DB provider
SQLNCLI.1 is not registered. Error code: 0x00000000. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". Code: 0xC020F42A . Source: SSISDataLoad Connection manager "DB_SSIS" Description: Consider changing the PROVIDER in the connection string to SQLNCLI10 or visit
View 4 Replies
View Related
Sep 4, 2015
I'm trying to create an SSIS package job in SQL server 2014 but I get the following error when trying to change the Package source and confirm. I have alsredy checked the connection mangers and they were all successful, I'm not sure what I should be checking.
"Make sure that the required parameter "name of parameter" is set".
View 2 Replies
View Related
