Integration Services :: File System Task Move Directory Deletes Parent Destination Folder
Mar 12, 2013
I attempted to use Move Directory to move the contents of one directory to another. I encountered the 'different volume' issue that others have experienced. While this error is frustrating I can work past this particular issue. My more pressing question is why is the move directory command overwriting a destination directory?
When I setup the Move directory file task I provided two vars to hold src and dest location:
dest var: estserveroutput
src var: devserverdev estfiles
Set overwrite destination = TRUE
Why would Move Directory overwrite output folder at destination? Shouldn't it only overwrite if the testfiles directory exists at destination? This is very frustrating since I cannot find enough information in the official documentation to understand what is happening here.
Is it just me or does the documentation for Move directory seem.....incomplete?
View 4 Replies
ADVERTISEMENT
Nov 9, 2015
I have created a File System task which is contained in a Foreach Loop Container. I have .bak files that are populating a directory from a maintenance backup plan.
There is a point where I need to delete the .bak file's after I've zipped them all up.
How do I set the SourceVariable to read through the directory and pick up just the .bak file's in the directory to delete.
View 3 Replies
View Related
Jul 13, 2006
Hi,
I want to move all files of one directory/folder into another usng SSIS, like in DOS Prompt we use the command,
Move d:ftpSource*.* d:ETLSource
I have tried by creating a file system task, but there is no option for Move Directory Contents. Move File is not accepting wild cards.
Regards,
Imran.
View 3 Replies
View Related
Oct 9, 2006
I am having an issue with the File System Task.
I was wondering if there is a way to 'Move File' with the File System Task inside of a For Each Loop container but to dynamically set the Destination path variable.
Currently, this is what I have:
FileDestinationPath variable - set to C:TestFiles
FileSourcePath variable - set to C:TestFiles
FileNameAndLocation variable - set to blank
For Each Loop Container Iterates through a folder C:TestFiles that has .txt files in it with dates in the file name. Ex: Test_09142006.txt. Sets the file path (fully qualified) to the Variable Mapping FileNameAndLocation.
Script Task (within For Each Loop, first step) Sets the FileDestinationPath to the correct dated folder within C:TestFiles. For example, if the text files I want to move are for the 14th of September, it takes FileDestinationPath and appends the date folder to the end of it. The text files have a date in the file name (test_09142006.txt) and I am picking this apart (from FileNameAndLocation in the For Each Loop) to get the folder date. (dts.Variables(User::FileDestinationPath?).Value = dts.Variables(User::FileDestinationPath?).Value & ? Month & _? & Day & _? & Year & ?) which gives me C:TestFiles 9_14_2006?.
File System Task (within For Each Loop, second step) This is where the action is supposed to occur. I want it to take the FileDestinationPath and move the FileNameAndLocation file (from the For Loop) into this folder for each run.
Now as for my problem. I want this package to run everyday but it has to set the FileDestinationPath variable dynamically according to that days date. Basically, how do I get this to work since I cant hard code the destination path variable from the start? I have the DestinationVariable on the File System Task set to the FileDestinationPath variable, after the script task builds it. However, using FileNameAndLocation as the SourceVariable on my File System Task tells me that the Variable FileNameAndLocation? is used as a source or destination and is empty.?
Let me know if I need to clarify further...I may be missing something very simple. Any help would be greatly appreciated!
View 10 Replies
View Related
May 29, 2015
How to design ta SSIS package which loops through DESTINATION folder files and checks whether that file is there in the SOURCE or not.
If the file exists then I have to check the modified date on DESTINATION file if it is greater than 1 day delete that file. If the modified date is less than that SOURCE file then I have to copy that
file to DESTINATION<o:p></o:p>
<o:p></o:p>
If there are files which exists in SOURCE and not in DESTINATION, then how shall we copy all the files to the DESTINATION that are created on the day of execution of package.<o:p></o:p>
View 2 Replies
View Related
Jan 13, 2015
I have set up an FTP connection that tests successfully. I can log on to the FTP site with the same credentials and see my root folder, and within that, two more folders. In my FTP task, I want to receive files to my local machine. The problem is that the only remote path available is not at the root level, and the only thing I can see are files from one of the child folders, but not the child folder I want.
Is it possible in the remote path to change folders? The remote path just shows a "/", which I thought would be the root level, but it is somehow linked to a child folder.I've tried various combinations to get to the folder I want, /root folder/child folder, but that gives the error that the folder does not exist.
If I open the FTP Task Editor, click on File Transfer, and click the ellipses for the Remote Path, the Browse For File box opens, with a "/" in the Location section, and a list of files in the child folder that I do not want to be in. If I click the "Up Directory" button, I get the message "Already at top level directory".
how I can get the files from one particular folder on the FTP site?
View 0 Replies
View Related
Sep 11, 2015
I have 2 source folder .I have created variable for both source folder like below
User::Source1 and User::Source2
and 1 destination folder variable like below
User::Destination
Now I have to search a file from both source folder which consist of *location_*.xml string in file name.I have to use C# Script task ,achieve above scenario as I required it on very urgent basis.
View 5 Replies
View Related
Aug 17, 2015
I have an SSIS script task using c#. i need to refere an .xsd dataset in the c# code. i tried to set property below.Build action to Content or Compile Copy to output directory Copy always But still i m unable to use the dataset in my code.
View 4 Replies
View Related
May 14, 2015
I'm copying files to a folder with the naming convention as follows in the source folder:
CM_ABC_MY_TEST.txt
In the destination folder, this filename needs to appear as:
CM_XYZ_MY_TEST.txt
In my File System Task, I'm pretty sure I'm going to need an expression with a replace, substring, etc. But am having a hard time nailing down the exact syntax.
View 10 Replies
View Related
Sep 13, 2006
Hi!
I'm having a bit of a problem implementing a File System Task to Create a directory and would appreciate some help if possible.
I want to create a date directory so I can move files to once they are imported successfully. The date portion for the directory comes from the import file whose name is variable and in the format of PerfLog_<yyyymmdd>.aud. So, in essence, if I am processing a file named Perflog_20060913.aud, when I am done processing it I want to create a directory c:myprog20060913 and move my processed file there.
Can anyone help me? Please.
View 7 Replies
View Related
Jul 25, 2007
This delete's the directory content as well as sub directory content! Is their a way i can just set it to delete the files in the said directory and not sub directories?
View 11 Replies
View Related
Jul 4, 2006
I'm having an issue where a folder that I'm accessing in an SSIS package gets locked up and cannot be deleted by my package later in the process.
1) I use a File System task to rename the folder. At this point, it appears to become locked and cannot be deleted.
2) Later I attempt to delete the folder using another File System task object. I get the error '[File System Task] Error: An error occurred with the following error message: "The process cannot access the file because it is being used by another process."'.
My package accesses the folder via a drive mapping. This seems to be part of the problem, as it's possible to delete the folder directly but not via the drive mapping. Even once the package completes it's still not possible to delete the folder in Windows Explorer via the drive mapping.
View 1 Replies
View Related
Jun 8, 2007
I am able to run SSIS packages as SQL Server Agent jobs with a Control Flow items "File system task", if I move a file (test.txt) from a drive (c on the server (where SQL Agent jobs run) to a subdirectory on the same drive. But, if I try to move a file on a network drive, the package fail.
What I can do to solve this issue.
Bye!
Daniel
View 1 Replies
View Related
Aug 12, 2015
I have to access the remote system folder files in local machine using SSIS.
View 2 Replies
View Related
Aug 19, 2015
how do I copy a folder from an FTP location using the FTP task in SSIS. Currently, I can only move the files in the folder one after the other but I want to copy the folder at once.
View 3 Replies
View Related
Jul 12, 2006
Hello
I want to move and rename a file and embed the date/time into it, so that each time the package runs a new file is created. For example MyFile_20060712_150000.doc.
Can someone give me a hint how to do this with the File Systen Task SSIS Control Flow Item?
Thanks for an early reply
Regards
Chaepp
View 12 Replies
View Related
Jun 26, 2015
I have created for each container to call all the packages in a folder like below, also created a variable.
Then I add execute package task inside of foreach container and selected file system in a location and in connection called currently creating package name finally in connection properties i added variable in expression which i created and mapped into for each loop container. I referred below link
[URL] ....
All the packages are running but its not ending once all the packages executed its re run and continue the running process, how to stop once all the packages execute.
View 24 Replies
View Related
Aug 4, 2015
I'm using the FTP Task in SSIS to send files. They task succeeds but the files get uploaded to the wrong folder. Instead of being sent to the cg268301 folder they are being sent to the cg268300 despite selecting /cg268301 from the remote path field in the FTP task editor.
I've tried uploading this file to the /cg268301 file using an execute process task and it works fine. I just don't know why it won't work with the FTP task.
View 3 Replies
View Related
May 19, 2006
Hi All,
I am having a problem using the file system task, what I am trying to achieve is to move a file after it has been processed . I am using a For each loop container to process bunch of files but I want to remove the files that have been processed after every loop.To achieve this I added a File System Task after my data flow task and was using the same variable used in the for each loop container as my source variable but the package is not being validated and is gives the following error
"variable used as the source or the destination is empty"
Appreciate your help
Thanks
View 6 Replies
View Related
Jul 10, 2015
IS that possible to get teh output of a execute sql task to excel destination.I have query which will comapre the data difference between two databses. It will comapre all tables in both databses and list out the difference in data by each table. I need to run this query using SSIS and need to get the output to a excel sheet...I have used the data flow task to run this query but my query is giving some error when used with data flow task. So i have used excecute sql task and need to write teh out put to a excel sheet.
View 11 Replies
View Related
May 27, 2015
I need to move specific files from a server to another server on a monthly basis. There are hundreds of files that are in the source directory and I need to move approximately 40 of those to the destination server. I would like to easily add or delete the file list as needed. I have seen where several variables were created for for each file name (and one for the path) and the ForEach Loop would go through them. With 40 or more I was thinking that I could make a connection to an Excel spreadsheet or text file with a record for each file name and read in and and move to the next record and make that value become the content of a "FileName" variable. Then if I wanted to add another file name I could just add another record to spreadsheet/text file or remove and the package would handle automatically....
View 10 Replies
View Related
Jul 24, 2015
Need to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
@[User::Output_Path] + "Comms_File"+ @[User:: FileNumber] +"_" + replace((DT_WSTR, 10) (DT_DBDATE) GETDATE(),"-","")+ ".txt"
All this successfully creates these 4 files:
Comms_File_1_20150724.txt, Comms_File_2_20150724.txt, Comms_File_3_20150724.txt, Comms_File_4_20150724.txt
Now the QUESTION is how do I get these filenames as I need to insert them into a DB Audittable. The audit table looks like this:
CREATE TABLE dbo.MMMAudit
(
AuditID INT IDENTITY(1, 1) NOT NULL,
PackageName VARCHAR(100) NULL,
FileName VARCHAR(100) NULL,
LoadTime DATETIME NULL,
NumberofRecords INT NULL
)
To save the Filename & how many records in each file in our Audit Table, am using an Execute SQL Task and configuring it as this:
Execute SQL Task
Parameter mapping - Mapped the User Variable (RecordsInserted) and System Variable( PackageName) to Insert statement as shown below
SQLStatement: INSERT INTO [dbo].[MMMAudit] (
PackageName,NumerofRecords,LoadTime)
(?,?.GETDATE)
Again this all works terrific & populates the dbo.MMMAudit table as shown below BUT I also need to insert the respsctive file name – How do I do that?
AuditID PackageName FileName NumberOfRecords
1 MMM NULL 12
2 MMM NULL 23
3 MMM NULL 14
4 MMM NULL 1
View 2 Replies
View Related
Aug 26, 2015
I have a ssis package where I need to have excel destination. In the Excel file, I need to have few rows with some text and then populate data below the text. One the text is like this:
Data as of: 08/25/2015
if the report ran today, then Data as of will have Yesterday. So, if the user opens that excel file after a week, then user should see same Data as of: 08/25/2015. not today()-day(1).
I was planing to handle on excel side with today()-day(1). but it only works the day it was run. Then the excel file is open after few days later, then it might as Data as of: 08/30/2015 which is not true. It should still stay Data as of:
08/25/2015 on what ever date the excel file is open. The SSIS package runs only once.
How do I handle this so that whenever user open the file, they will see Data as of: 08/25/2015. This is not a column in excel. It is like a description of data in excel.
View 3 Replies
View Related
Jul 18, 2012
I have one SSIS package that has FTP task which takes files from FTP and save on my local drive but i'm getting above error.
[FTP Task] Error: Directory is not specified in the file connection manager "User::ProcessingFileLocation".
In FTP Editor setting :
User::ProcessingFileLocation used SSIS variable and values sets to this is MYSERVERRaw Data
why getting this error?
when i mention direct path it is working fine BUT why not for variable.I'm using same path for other packages too they all are working fine.
View 11 Replies
View Related
Apr 6, 2015
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
Nothing is wrong with package.
View 10 Replies
View Related
Nov 9, 2015
I need to get the record counts for all the flat files in a folder. All the flat files are having different format.
Can I get the record count using a single data flow task and for each loop container?
View 3 Replies
View Related
Oct 18, 2015
We have a single generic SSIS package that is used to import several hundred iSeries tables into SQL. I am not looking to rewrite the process. But I am looking for ways to improve performance.
I have tried retain same connection, maximum insert commit size, lock table (tablock), removed some large columns, played with the log file location and size, and now I am working to tweak the defaultbuffermaxrows.
To describe the data flow task - there are six data flows tasks (dft) working at the same time. Each dtf has their own list of iSeries tables and columns and the corresponding generic SQL table names. Each dtf determines their list of tables based on the number of columns to import. So there is dft30 (iSeries table has 1-30 columns to import), dtf60 (iSeries table has 31-60 columns to import), etc. The destination SQL tables are generically called Staging30, Staging60, etc. Each column in the generic Staging tables are varchar(100). The dtfs are comprised of an OLE DB Source and an OLE DB Destination.
The OLE DB Source uses a SQL Command from Variable to build a SELECT statement. The OLE DB Source uses a connection manager that uses an IBM iAccess IBMDA400 provider. The SQL Command ends up looking like this for the dtf30. This specific example is importing from the iSeries table TDACLR and it only has two columns so it will be copied to the Staging30 table.
select TCREAS AS C1,TCDESC AS C2,0 AS C3,0 AS C4,0 AS C5,0 AS C6,0 AS C7,0 AS C8,0 AS C9,0 AS C10,0 AS C11,0 AS C12,0 AS C13,0 AS C14,0 AS C15,0 AS C16,0 AS C17,0 AS C18,0 AS C19,0 AS C20,0 AS C21,0 AS C22,0 AS C23,0 AS C24,0 AS C25,0 AS C26,0 AS C27,0 AS
C28,0 AS C29,0 AS C30,''TDACLR'' AS T0 from Store01.TDACLR
The OLD DB Source variable value looks like the following, but I am not showing the full 30 columns
select cast(0 AS varchar(100)) AS C1,cast(0 AS varchar(100)) AS C2,cast(0 AS varchar(100)) AS C3,cast(0 AS varchar(100)) AS C4,cast(0 AS varchar(100)) AS C5, ... cast(0 AS varchar(100)) AS C30.
The OLE DB Destination uses OpenRowSet Using FastLoad From Variable. The insert into Staging30 ends up looking like this.
insert bulk STAGE30([C1] varchar(100) ,[C2] varchar(100) ,[C3] varchar(100) ,[C4] varchar(100) ,[C5] varchar(100) , ... ,[C30] varchar(100) ,[T0] varchar(20)
Of course we then copy and transform the Staging30 data to the SQL table that equals T0.
But back to defaultbuffermaxrows. Previously the dtfs had default values of 10000 for DefaultBufferMaxRows and 10485760 for DefaultBufferSize. I added a SQL task to SUM the iSeries column sizes, TCREAS and TCDESC in this example, and set the DefaultBufferMaxRows by dividing the SUM of the columns max_length into 10485760. But I did not see a performance improvement. Do you think that redefining the columns as varchar(100) for the insert is significant? Should I possibly SUM the actual number of columns (2) as 2x100 or SUM the 30x100?
View 4 Replies
View Related
Sep 11, 2015
I have a requirement in which i need to pull records from a table and load into destination flat file ..and at end of file it should display row count
for e: like this
" rowcount: 40 records" ..
i tried placing rowcount transformation in between source and flat file destination..i am able to get all records in file but unable to pull value of variable where i stored row count into that file...how to do that?
View 3 Replies
View Related
Jun 10, 2015
I am using the below code in my command prompt and it is copying all the records from a particular table and dropping in Flat file format in particular folder location. The below code is working if I am pointing to my local database but if I need to point to different database outside my environment how should I set it here also including the case where User ID and password are required to access the db.bcp AdventureWorks.HumanResources.Department out C:myDepartment_c_t.txt -c -t, -r -T -S.
View 12 Replies
View Related
Sep 9, 2015
I have a package that need to copy a file from a remote server using path like ipaddresssharedfolder..now, inside of Microsoft data tools, everything runs fine, because y access to those folders on the windows sessions and enter my credentials. however how to I set up the package to use my credentials on the remote server?
Without it, I got error Executed as user: NT ServiceSQLAgent$RETAIL_PRO.and this user does not exists on remote server. so got access denied. error.
View 4 Replies
View Related
Jun 8, 2015
I have a requirement where I have to take all the data available from a sql table and write it out as a flat file in folder location.Its a simple table have 8-10 coloumns, have to take this data on daily basis from sql table and deliver out as flat file in a folder.
View 19 Replies
View Related
Oct 29, 2015
Is there a recommended file format (csv, xml, txt) when choosing a file destination for SSIS? Does a file format impact the performance in terms of loading? Let's say i have chosen to use a .csv as my file destination (this has 15million rows and 50 columns with 2 bigint and the rest binary(32)) and later on, i would need to reload them back to table using SSIS. Is using csv faster than e.g. xml when reloading? Does it have performance impact at all?
View 3 Replies
View Related
Nov 3, 2015
I set up a connection file in order to move data from sql to csv files. I should be at the last step, the data flow. but:I don't see any flat file in my destination assistant.
View 23 Replies
View Related
