I have multiple excel Files each has one sheet (With same column names) need to be loaded in a single table. I tried For each loop but couldn't succeed.
As I am new to SSIS. How to configure For each loop container for this...
I have a situation where I want to load the Excel file dynamically, and the excel file have different columns or even worksheet name. How I could approach this? I believe there's no way to modify the meta data (specifically the mapping) in the data flow.
View 6 Replies View RelatedI have 2 different excel files file1 and file2. file1 should be loaded to table1 and file2 should be loaded to table2. Both of the files will have 1 sheet inside. Do I need to create separate excel source for file1 and file2? I mean file1 in one excel source and that will be connecting to 1 execute sql task. file2 in other excel source and that will be connecting to another execute sql task. Is this the way I should proceed or is there any looping should be done? I need to schedule this activity to run every week. So, I'll get new files every week with the same file names and sheet names. Do I need to consider anything for this requirement also?
I'm planning to do truncate and reload not an incremental load.
have an excel file which contains lots of sheets. Some of them are named as DW-<day>-<month> (for e.g; DW-1-July). Like this I have sheets for the whole month. I have other sheets too with a different name. I would like to import data from these sheets only (DW ones). Upon my research I have found that this can be achieved via For Each Loop Container.
View 7 Replies View RelatedI have a requirement to load multiple flat files in target table .
I have created the package which used to load files into target table using For each loop container.
But now requirement has been changed now I have to take only those files from table where status="Success" and max JobId. By the query I am to get those records which need to load into table.
Below query I am using to get the files which need to load.
select [JobLogKey],[SrcNm],[DestNm]
FROM [ConfigRep].[dbo].[JobLog]
Where [JobId]=
(Select Max(cast([JobId] as Int)) Jobid
FROM [ConfigRep].[dbo].[JobLog]
Where [JobStat]='Success')
Output:-
JobLogKey SrcNm DestNm
268 H:Data PlatformSource FileClient2LocHGSSpecLocation.txt Location.txt
269 H:Data PlatformSource FileClient1LocHGSSpecLocation.txt Location.txt
I have to load using above 2 files which are under SrcNm. I have created one variable called FileToLoad as Object and mapping to result set of above query. I have create JobId,SrcNm and DestNm variable to catch the record at every loop. I have created 2 For each Loop container
Below screen shot of outer Foreach loop. Till here Its working fine. Inner for each loop container not executing any task under that. How to get it done.
how do you load the multiple flat files to into destination dynamically?
View 9 Replies View RelatedMy Requirement ,In Source Database 5 tables are there ( Emp,Loc,dept,Time,Product ), Destination is Single Excel file.But Dynamically how to load each table information to load into each sheet wise through SSIS Package?
View 3 Replies View RelatedI have an excel file which contains lots of sheets. Some of them are named as DW-<day>-<month> (for e.g; DW-1-July). Like this I have sheets for the whole month. I have other sheets too with a different name. I would like to import data from these sheets only (DW ones). Upon my research I have found that this can be achieved via For Each Loop Container (I guess!).
Post data import, I have a set of T-SQL query that I plan to execute via Execute SQL Task.
I am loading data using SSIS 2008 from a table in SQL Server 2008 DB to excel 97 sheet pre-defined with column headers. All the columns in excel is has 'Text' format property and the columns in the SQL Server table are defined as nVarchar. One of the columns has trailing spaces in few rows in DB but after exporting to excel 97, the spaces are gone. We need to retain the whitespaces in the column values. How can we do that.
View 3 Replies View RelatedI need to move specific files from a server to another server on a monthly basis. There are hundreds of files that are in the source directory and I need to move approximately 40 of those to the destination server. I would like to easily add or delete the file list as needed. I have seen where several variables were created for for each file name (and one for the path) and the ForEach Loop would go through them. With 40 or more I was thinking that I could make a connection to an Excel spreadsheet or text file with a record for each file name and read in and and move to the next record and make that value become the content of a "FileName" variable. Then if I wanted to add another file name I could just add another record to spreadsheet/text file or remove and the package would handle automatically....
View 10 Replies View Relatedi have a excel file in which i have a date column it having the below date formats below
Install Date
20140721
31.07.2014
07.04.2015
20150108
20140811
20150216
7/21/2014
11.08.2014
07.08.2014
So using SSIS how we would load this date column into the table into one format like dd/mm/yyyy or any single date format
I have one folder in that i have 3 files
1) customer.txt
2) employee.txt
3) student.txt
i want to load these three files three different destinations customer file should go one destination table, employee file should go one destination table, student file should go one destination table tomorrow if i get some more files in same folder , those files also should go separate destinations these should happen dynamically.
I have one small requirement.. I want to load the different types of files(.txt, .csv, .tsv, .xlsx).
Using one forearch loop container how can I load the files to database and I shouldn't use the script task to split the filenames. Is there any other way to load all the files using forearch loop container, exesql task..
Client uses an Amazon S3 bucket which they load flats files to . They also expect files to be delivered there to.So at the minute I have an SSIS package (SQL2012 ) which I use to generate some files but then have to manually import the files to the S3 bucket as well as export others.Now Mike Yin ( For SQL2008R2 ) mentioned that you need to obtain PostgreSQL ODBC driver so that you can use the .Net ProvidersOdbc Data Provider for ADO.NET Source component to connect to the Amazon cloud storage. After that, you can use a OLE DB Destination to load the data to SQL Server database.
Installed both 32 and 64bit 9.03. New connection Manager ADO.NET - New then drop the provider down to ODBC.Dataprovider.Then what ? Do I put the S3 bucket address within the use connection string ? Is there and example ? Why do I need the PostgreSQL ODBC as Im not connecting to a database just a S3 Bucket?
We have a few customers dropping files in Amazon S3. how to load this data into SQL Server 2008 R2 database using SSIS? We are 2008 R2 BIDS environment.
View 5 Replies View RelatedI am getting the following error when trying to load multiple excel files using for each loop container in SSIS, I tried to put the quotes in several different ways but still can't get rid of this error. I was able to successfully load single excel file, but when I use the for each loop container that's when I am having problems. Any help is greatly appreciated. Thx.
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package1 [Connection manager "SourceConnectionExcel"]: The connection string components cannot contain unquoted semicolons. If the value must contain a semicolon, enclose the entire value in quotes. This error occurs when values in the connection string contain unquoted semicolons, such as the InitialCatalog property.
Error at Package1: The result of the expression ""Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + @[User::Folder] + @[User::file] + ";Extended Properties="Excel 8.0;HDR=NO";"
" on property "ExcelFilePath" cannot be written to the property. The expression was evaluated, but cannot be set on the property.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
Task- To Send csv files to Secure FTP.
Problem: Script Task using Third Party DLL for Secure FTP mainly "Eldos" is not able to load dll ,when deployed on integration server.
Resolution: Usually i Follow and it works even : Copy and Paste Dll in below location depending on Server Configuration.
If Server is Window 32 Bit
"C:Program Files (x86)Microsoft SQL Server100DTSBinn"
If Server is Window 64 Bit
"C:Program FilesMicrosoft SQL Server100DTSBinn"
Tried Another Resolution:
If Server is Window 32 Bit
"C:Program Files (x86)Microsoft SQL Server100SDKAssemblies"
If Server is Window 64 Bit
"C:Program FilesMicrosoft SQL Server100SDKAssemblies"
Hello,
Here's my need :
In one directory there's several excels file. Theses file have the same structure :
col : LOOKID, LOOKNAME, ASMPID, ASMPNAME, LOOKTYPE, LTYP_NAME, PAR_TYPE, PTYP_NAME, PARAMETER, VALUE.
The problem is that the cell format of the PARAMETER col. is different bewteen excel files. It could be date, numeric, ... The col destination in sqlservr database is Varchar(10).
I've created the ssis package with a ForEach Loop, and in the ForEach loop I've created a Data Flow Task.
In the data Flow Task I've created an excell source file (using excel file with col PARAMETER in date format) with an OLE DB destination.
When I launch the package on the same excel file as the one using to create Excel Source object it's OK, no errors, and data in the sql table are OK.
But when I launch the package on Excel file with col. PARAMETER in numeric format, there's no execution errors, but in the destination table the value of the PARAMETER col. is transform in date format.
I tried to change in Excel source object the datatype of the input PARAMETER col, but I've got some compilations errors. It seems that SSIS recognize automaticaly excel source data type col. But may be I did something wrong in the excel source settings ?
Is there a way to force the excel source datatype with varchar(10) ?
I've also tried to do the treatment with an script task but my vb.net knowledge isn't enought to do that.
If you have some suggestions, I'm listening.
Thanks
Luffy
I am trying to load a simple Excel file into a Database table and the SSIS Package is not loading any records beyond 3233 records. I am just surprised. I tried using the "IMEX=1" mentioned in some of the online resources but it didn't work. I am using an Excel Source, a Data Conversion Transformation and an OLEDB Destination in my package in SQL Server 2014 (which is pretty simple and straightforward).The Excel file I am trying to load can be found here.
And, here is my table structure.
CREATE TABLE [gov].[loan_limits](
[FIPS_State_Code] [varchar](3) NOT NULL,
[FIPS_County_Code] [varchar](3) NOT NULL,
[County_Name] [varchar](50) NOT NULL,
[State] [varchar](2) NOT NULL,
[CBSA_Number] [varchar](6) NOT NULL,
[code]...
Facing problem while loading date in MS SQL Server 2005 from excel file (csv format).
How to load the excel file data without changing the excel file (csv format) .
see the [Start Date] and [ Exp End Date] having values like this : " 2015/07/31"
I want to load flat files into a single table. But the flat files can have variable number of columns upto a maximum of 10 columns. The table in my database has 10 columns in it. So in case if I load a flat file having 6 columns then rest of the columns in the table will have nulls. I don't want to use script task for this as I am not good in writing C#code.
View 5 Replies View RelatedWe have 10 sheets in Excel File and 10 sheet contains errror data. How to load 9 sheets data in to 1 destination and error data in to other destination?
View 4 Replies View RelatedI am trying to load data from Excel 2007 version into SQL server 2014 DB. I am getting below error" SSIS Error Code DTS_E_CANNOTACQUIRE CONNECTION FROM CONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed".I have tried all options like changing Delay Validation is TRUE and in properties i changed runtime 64 bit to FALSE but still getting above error.
View 3 Replies View RelatedI am working on a custom component to implement some rules based on the column name. I am looking for ways to identify the column name using lineage id. Is there anyway we can derive column name using the lineage id?
View 3 Replies View RelatedI have a simple SSIS package that reads a flat file and copies it into a SQL Server table.
When the flat fiel is on the C drive I have no problem runnign this package from SQL Server Agent, but as soon as I update the path to a network location the package only works when I run it manually, but fails when is executed via the SQL Server agent job.
The error says "cannot open the datafile", while the datafile location is valid.
Is this a kind of limitation of a SQL Server Agent that only local files are allowed to be processed?
I have a requirement where in i have around 15 different flat files , filenames are fixed but folder path can be changed(i think i should use a variable for folder path). These 15 files data should go to their respective tables in the database.
Whether I need to create separate data flow task for each file or separate package? In addition to these, example : while importing product data into product table, if product ID already exists, we need to ignore it and upload only the new records.
I have an excel file that has multiple sheets and I need to import data from each separate sheet to a separate table using SSIS.
E.g. Sheet A data should go to Table A and Sheet B data should go to Table B and so on. Is it possible to do this with out using script task.
We'll be using 2014 enterprise to stage some excel files into sql. Can ssis read excel files from a sharepoint server?
View 4 Replies View RelatedI have several regular reports that are produced by different offices that I need to import the data from. The challenge lies in the fact that the reports are not simply columns of data. Some cells are labels, others contain data, and some contain both. Also, the formatting of the reports isn't strictly uniform from office to office. Is it possible to read this kind of sheet? Excel data sources seem to just define everything in a column as data, and that doesn't work for me. Is there an alternative, or perhaps a more manual way of defining what cells contain data?
View 10 Replies View RelatedWhile importing data from Excel source , some column is getting null value even though excel column has value.To Resolve the issue we tried with
HKEY_LOCAL_MACHINESOFTWAREWow6432NodeMicrosoftOffice14.0Access Connectivity EngineEnginesExcel
1.Change the Value of the Row TypeGuessRows from 8 (Default value) to 0 and ImportMixedType = text
• xls
HKEY_LOCAL_MACHINESOFTWAREMicrosoftJet4.0EnginesExcel
1.Change the Value of the Row TypeGuessRows from 8 (Default value) to 0 and ImportMixedType = text
the connection string of the excel
UPPER(REVERSE(SUBSTRING( REVERSE(@[User::VarInputExcelFile]), 1, 5) ) ) == ".XLSX" ? "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" + @[User::VarInputExcelFile] + ";Extended Properties="Excel 12.0;HDR=Yes;IMEX=1";":"Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=" + @[User::VarInputExcelFile] + ";Extended Properties="EXCEL 8.0;HDR=Yes;IMEX=1";"
by doing the above setting also , the column is coming as null from excel source even though there is data in excel.
1. SQL 2008 R2
2. Maintenance Plan -
a. Daily, Weekly, Monthly schedule
b. Full Back Up - All Database, To Disk, for every database and Disk:DirectorySubDirectory*.bak Compress backup
3. SQL Agent Job
a. Runs the Sub_Plan's at scheduled time I've allocated for each Maintenance Plan.
4. These creates Multiple .bak for all database's that list in the directory.
How can I zip them into a compressed Directory.
We run std 2008 r2. I'm looking at the files this transform is complaining about. They seem to be named appropriately. The customerid folders don't exist when this runs. I'm going to put one in place to see if that is the problem.
The errors i'm getting are...
[Export Column [22]] Error: The file name "c:usersmyuserid heprojectnamecustomeridafilename.doc" is not valid. The file name is a device or contains invalid characters.
[Export Column [22]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "component "Export Column" (22)" failed because error code 0xC020207F occurred,
and the error row disposition on "input column "FILENAME" (29)" specifies failure on error. An error occurred on the specified object of the specified component.
There may be error messages posted before this with more information about the failure.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Export Column" (22) failed with error code 0xC0209029
while processing input "Export Column Input" (23). The identified component returned an error from the ProcessInput method. The error is specific to the component,but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Import.csv file looks like,
TABLE_NAME DESC CODE
tab1 table1 A
tab1 table1 B
tab1 table1 C
tab2 table2 D
tab2 table2 E
tab2 table2 G...
First column values are table names which are already exists in target database. Next two columns[Desc],[Code] data gets populate from CSV file to table.
In this scenario, how to load tab1 data into the same table in destination and so on.
Which way will be more standard to accomplish this task? If its a script task using C#, looking for clear script to identify a value changes in the first column.